Fluke

Founded in 1948, Fluke is one of the world’s leading manufacturers of industrial electronic test tools, diagnostic equipment, thermal imaging devices, and metering equipment. Our instruments are well known for their accuracy, convenience, and durability.

Showing 49 - 76 of 76 Items
Filters Clear Filters
expand_less Category (1)
expand_less Brand
expand_less Available Inventory
expand_less Ways to Shop
Fluke
Current probe is based on Hall Effect technology for use in measurement of both DC and AC current. May be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.
MFR: Fluke
MFR #: I310S
UPC: 095969401241
Item #: 199985
Available to Order
$599.99 each
Availability
Location Available Qty
Fluke
Where rugged meets reliable. The Fluke 365 is a new, innovative Fluke clamp meter, offering a thin, small jaw design that makes it easy to get around tightly packed wires. Be ready for anything. The Fluke 365 is a rugged meter perfect for jobs where access to wires is difficult. The 365s thin, small jaw is detachable with a flexible lead, which makes gaining access to wires and viewing the display easier than ever.
MFR: Fluke
MFR #: FLUKE-365
UPC: 095969544788
Item #: 190663
Available to Order
$349.99 each
Availability
Location Available Qty
Fluke
FLUKE-772 Milliamp mA Process Clamp Loop Meter
MFR: Fluke
MFR #: FLUKE-772
UPC: 095969475815
Item #: 136323
Available to Order
$1441.99 each
Availability
Location Available Qty
Fluke
Is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within
MFR: Fluke
MFR #: 80K-15
UPC: 095969063517
Item #: 184916
Available to Order
$379.99 each
Availability
Location Available Qty
Fluke
Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz.
MFR: Fluke
MFR #: VPS210-G
UPC: 095969435789
Item #: 118328
Available to Order
$262.99 each
Availability
Location Available Qty
Fluke
Versatile and rugged tools for applications with high currents. Confidently take reliable readings with the True-rms, Fluke 355 and 353 digital clamp meters the tools of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide
MFR: Fluke
MFR #: FLUKE-353
UPC: 095969401197
Item #: 22870
Available to Order
$1119.99 each
Availability
Location Available Qty
Fluke
Rigid Back Probe Pin Set, Voltage Rating: 60 VDC, Length: Tip: 2 IN, Color: One Red And One Black, For Use On 2 MM OD Probe Tips
MFR: Fluke
MFR #: TP88
UPC: 095969261289
Item #: 94545
Available to Order
$41.99 each
Availability
Location Available Qty
Fluke
Unprecedented measurement flexibility. Be ready for anything. The Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 25 cm (10 in) size.
MFR: Fluke
MFR #: FLUKE-I2500-10
UPC: 095969559706
Item #: 100084
Available to Order
$229.99 each
Availability
Location Available Qty
Fluke
Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz.
MFR: Fluke
MFR #: VPS210-R
UPC: 095969435772
Item #: 117668
Available to Order
$262.99 each
Availability
Location Available Qty
Fluke
TP 38 Slim Reach Test Probe Set
MFR: Fluke
MFR #: TP38
UPC: 095969078771
Item #: 134421
Available to Order
$31.99 each
Availability
Location Available Qty
Amprobe
Test Lead, Included: Shrouded 90 DEG Banana Plugs, One Red And One Black Leads And Clips, CE Certified
MFR: Fluke
MFR #: TL35B
UPC: 095969425124
Item #: 20486
Available to Order
$35.99 each
Availability
Location Available Qty
Fluke
Hanging Hook, For ScopeMeter 190-Series II Test Tools
MFR: Fluke
MFR #: HH290
UPC: 095969580359
Item #: 823118
Available to Order
$123.99 each
Availability
Location Available Qty
Fluke
Unprecedented measurement flexibility. Be ready for anything. The Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 45 cm (18 in) size.
MFR: Fluke
MFR #: FLUKE-I2500-18
UPC: 095969559690
Item #: 136105
Available to Order
$229.99 each
Availability
Location Available Qty
Fluke
FLUKE-773 Milliamp mA Process Clamp Meter
MFR: Fluke
MFR #: FLUKE-773
UPC: 095969475822
Item #: 3431
Available to Order
$1830.99 each
Availability
Location Available Qty
Fluke
AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3
MFR: Fluke
MFR #: I800
UPC: 095969401227
Item #: 200291
Available to Order
$419.99 each
Availability
Location Available Qty
Fluke
Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding
MFR: Fluke
MFR #: TP82
UPC: 095969261265
Item #: 287156
Available to Order
$94.99 each
Availability
Location Available Qty
Fluke
Automotive Back Probe Pin Set, Voltage Rating: 60 VDC, For Use With Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit
MFR: Fluke
MFR #: TP40
UPC: 095969087513
Item #: 21263
In Stock -
$68.99 each
Availability
Location Available Qty
Fluke
AC Current Clamp-On Probe, Model: i1000, Voltage Rating: 600 VAC Maximum, Amperage Rating: 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current), Measuring Range: 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current, Accuracy: 1 PCT Plus 1 AMP (48 - 65 HZ) ( percentage Reading Plus Floorspec), Enclosure: IP40 (IEC 529), Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output Cable, Operating Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 71 DEG C, Dimensions: 4.37 IN Width X 8.5 IN Length X 1.77 IN Depth, CAT III 600 V, CAT IV 300 V, For Use With Multimeters With Optional PM9081/001 BNC/Banana Adapter And Oscilloscopes
MFR: Fluke
MFR #: I1000S
UPC: 095969090476
Item #: 238466
Available to Order
$749.99 each
Availability
Location Available Qty
Fluke
I1010 AC/DC Current Clamp
MFR: Fluke
MFR #: I1010
UPC: 095969048200
Item #: 41792
Available to Order
$534.99 each
Availability
Location Available Qty
Fluke
Fluke Current Clamps are the ideal tools to extend the current ranges of Multimeters. Is a single range 200A ac current clamp with current output via safety shrouded banana plugs. Is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
MFR: Fluke
MFR #: I200
UPC: 095969063937
Item #: 178448
Available to Order
$219.99 each
Availability
Location Available Qty
Fluke
TEST LEAD ACC SET LANTERN TIP TEST PROBE RED/BLK
MFR: Fluke
MFR #: TP74
UPC: 095969078788
Item #: 96313
Available to Order
$30.99 each
Availability
Location Available Qty
Amprobe
DELUXE TEST LEAD KIT
MFR: Fluke
MFR #: DL248D
UPC: 095969414647
Item #: 25267
Available to Order
$115.99 each
Availability
Location Available Qty
Discontinued
SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing
Fluke
SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing
MFR: Fluke
MFR #: TL225
UPC: 095969288781
Item #: 232057
In Stock -
$154.99 each
Availability
Location Available Qty
Discontinued
CABLEIQ QUALIFICATION TESTER
Fluke
CABLEIQ QUALIFICATION TESTER
MFR: Fluke
MFR #: CIQ-100
UPC: 754082022602
Item #: 11791
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
400A SWIVEL CLAMP
Amprobe
400A SWIVEL CLAMP
MFR: Fluke
MFR #: ACD-20SW
UPC: 095969498821
Item #: 4556
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1
Fluke
Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1
MFR: Fluke
MFR #: VPS220-R
UPC: 095969435833
Item #: 224255
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1
Fluke
Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1
MFR: Fluke
MFR #: VPS220-G
UPC: 095969435840
Item #: 224110
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Test Lead Set - PVC test lead set connects a compatible electrical test meter to a device for testing, Set includes two 48" lead wires, two standard probe tips, and two alligator clips, 3.26" alligator clips have 1.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips.
Amprobe
Test Lead Set - PVC test lead set connects a compatible electrical test meter to a device for testing, Set includes two 48" lead wires, two standard probe tips, and two alligator clips, 3.26" alligator clips have 1.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips.
MFR: Fluke
MFR #: MTL-45
UPC: 095969368162
Item #: 124159
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty