Fluke
AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3
MFR: Fluke
MFR #: I800
UPC: 095969401227
Item #: 200291
Fluke
AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3
MFR #: I800
UPC: 095969401227
Item #: 200291
Availability
| Location | Available Qty |
|---|---|
| Available | Available to Order |
$419.99
each
Catalog Number
I800
Manufacturer
Fluke
Brand
Fluke
Country of Origin
Unknown
Made in USA
No
Accuracy
Plus/Minus 1 PCT Of Reading
Measuring Range
800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current
Special Features
The model i800 is a clamp-on AC current probe designed to extend the current measuring capability of a digital multimeter to 800 AMP AC; The clamp is compatible with a DMM that accepts 4 MM shrouded banana plugs and has an AC milliamp range; Measures AC current from 100 MILAMP - 800 AMP RMS; 30 HZ - 10 KHZ frequency range; Accepts up to 54 MM diameter conductor size; 1000:1 conversion factor for easy calculation; Rugged positive action design; Lowest measureable current: 100 MILAMP; Useable frequency: 30 HZ - 10 KHZ (-3 DB); Output level(s): 1 MILAMP/A; Lead connector: Shrouded banana plugs; Phase shift at 2 KHZ: Plus/minus 1 DEG typical; Bandwidth: 30 HZ - 10 KHZ (-3 DB); Overload conditions: Operation above 1200 AMP should be limited to frequencies below 1 KHZ; Duty cycle: 1500 AMP at 50/60 HZ for 1 HR, 33 PCT duty cycle (20 MINT On, 40 MINT Off); Pollution degree: 2
Standard
CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3
UPC
095969401227
GTIN
00095969401227
Item Type
AC Current Clamp Probe
Length
1.6 MR Output cable
Diameter
54 MM Maximum Conductor
Voltage Rating
600