Fluke

Founded in 1948, Fluke is one of the world’s leading manufacturers of industrial electronic test tools, diagnostic equipment, thermal imaging devices, and metering equipment. Our instruments are well known for their accuracy, convenience, and durability.

Showing 1 - 48 of 765 Items
Filters
expand_less Brand
expand_less Category
+ Show 8 More
expand_less In Stock?
expand_less Ways to Shop
Designed by electricians. Engineered by Fluke. For general purpose electrical and electronic test requirements, the Fluke 115 true-rms digital multimeter provides the perfect answer. Its simple operation, compact design and ease of use makes it perfect for quick verifications and field service use. The Fluke 115 displays true-rms voltage and current readings with 6000 count resolution, tests diodes, frequency, continuity and capacitance and provides Min/Max/Average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes a snap. Fluke 115 multimeters are independently tested for safe use in CAT III 600V environments. And check out other members of the Fluke 110 family: the Fluke 113 Utility Multimeter, the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter and the Fluke 117 Commercial Electricians Multimeter. Also check out the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electricians Multimeter with Non-contact voltage.
Fluke
Designed by electricians. Engineered by Fluke. For general purpose electrical and electronic test requirements, the Fluke 115 true-rms digital multimeter provides the perfect answer. Its simple operation, compact design and ease of use makes it perfect for quick verifications and field service use. The Fluke 115 displays true-rms voltage and current readings with 6000 count resolution, tests diodes, frequency, continuity and capacitance and provides Min/Max/Average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes a snap. Fluke 115 multimeters are independently tested for safe use in CAT III 600V environments. And check out other members of the Fluke 110 family: the Fluke 113 Utility Multimeter, the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter and the Fluke 117 Commercial Electricians Multimeter. Also check out the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electricians Multimeter with Non-contact voltage.
MFR: Fluke
MFR #: FLUKE-115
UPC: 095969324182
Item #: 151137
Available to Order
$248.99 each
Availability
Location Available Qty
Fluke 117 Digital Multimeter: The choice for commercial applications. Designed by electricians. Engineered by Fluke. The compact Fluke 117 true RMS digital multimeter is optimized to help you keep commercial buildings, hospitals and schools running right. The advanced features of the Fluke 117 help you get the job done, quickly and safely. Integrated non-contact voltage detection helps you identify energized circuits. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 117 delivers true-rms ac voltage and current readings with 6000-count resolution. It provides Min/Max/Average readings and measures frequency and capacitance. The battery door is easy to access, so you and your Fluke 117 can stay on the job. Fluke 117 multimeters are independently tested for safe use in CAT III 600V environments. And check out other members of the Fluke 110 family: Fluke 113 Utility Multimeter, the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter and the Fluke 116 HVAC Multimeter with Temperature and Microamps.
Fluke
Fluke 117 Digital Multimeter: The choice for commercial applications. Designed by electricians. Engineered by Fluke. The compact Fluke 117 true RMS digital multimeter is optimized to help you keep commercial buildings, hospitals and schools running right. The advanced features of the Fluke 117 help you get the job done, quickly and safely. Integrated non-contact voltage detection helps you identify energized circuits. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 117 delivers true-rms ac voltage and current readings with 6000-count resolution. It provides Min/Max/Average readings and measures frequency and capacitance. The battery door is easy to access, so you and your Fluke 117 can stay on the job. Fluke 117 multimeters are independently tested for safe use in CAT III 600V environments. And check out other members of the Fluke 110 family: Fluke 113 Utility Multimeter, the Fluke 114 Electrical Multimeter, the Fluke 115 Multimeter and the Fluke 116 HVAC Multimeter with Temperature and Microamps.
MFR: Fluke
MFR #: FLUKE-117
UPC: 095969324205
Item #: 147879
In Stock -
$265.99 each
Availability
Location Available Qty
Designed by electricians. Engineered by Fluke. Designed for easy one-hand operation, the Fluke 114 true-rms digital multimeter is the perfect troubleshooting tool for go/no go testing. Its AutoVolt capability automatically switches to measure AC or DC voltage, whichever is present. The LoZ function helps identify so-called ghost voltage and prevent false readings. The Fluke 114 displays true-rms voltage and current readings with 6000 count resolution, and tests frequency, continuity and resistance. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes easy. Fluke 114 multimeters are independently tested for safe use in CAT III 600V environments. And check out other members of the Fluke 110 family: the Fluke 113 Utility Multimeter, the Fluke 115 Field Service Multimeter, the Fluke 116 HVAC Multimeter and the Fluke 117 Commercial Electricians Multimeter.
Fluke
Designed by electricians. Engineered by Fluke. Designed for easy one-hand operation, the Fluke 114 true-rms digital multimeter is the perfect troubleshooting tool for go/no go testing. Its AutoVolt capability automatically switches to measure AC or DC voltage, whichever is present. The LoZ function helps identify so-called ghost voltage and prevent false readings. The Fluke 114 displays true-rms voltage and current readings with 6000 count resolution, and tests frequency, continuity and resistance. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes easy. Fluke 114 multimeters are independently tested for safe use in CAT III 600V environments. And check out other members of the Fluke 110 family: the Fluke 113 Utility Multimeter, the Fluke 115 Field Service Multimeter, the Fluke 116 HVAC Multimeter and the Fluke 117 Commercial Electricians Multimeter.
MFR: Fluke
MFR #: FLUKE-114
UPC: 095969324175
Item #: 126189
In Stock -
$203.99 each
Availability
Location Available Qty
TwistGuard Test Probe, Voltage Rating: 1000 V, Amperage Rating: 10 AMP, Diameter: Tip: 2 MM, UL Listed, Conforms To EN61010-031, CAT II 1000 V, CAT III 1000 V, CAT IV 600 V Rated, For Use With The TL22X Series, TL238 And TL27 Test Leads And Multimeters
Fluke
TwistGuard Test Probe, Voltage Rating: 1000 V, Amperage Rating: 10 AMP, Diameter: Tip: 2 MM, UL Listed, Conforms To EN61010-031, CAT II 1000 V, CAT III 1000 V, CAT IV 600 V Rated, For Use With The TL22X Series, TL238 And TL27 Test Leads And Multimeters
MFR: Fluke
MFR #: TP175
UPC: 095969521550
Item #: 117308
In Stock -
$41.99 each
Availability
Location Available Qty
VoltAlert Electrical Tester, Voltage Rating: 90 - 1000 VAC, Operating Temperature: -10 To 50 DEG C, Battery: (2) AAA, IEC 61010-1:2001, UL 61010-1, CAN/CSA-C22.2, CAT IV 1000 V
Fluke
VoltAlert Electrical Tester, Voltage Rating: 90 - 1000 VAC, Operating Temperature: -10 To 50 DEG C, Battery: (2) AAA, IEC 61010-1:2001, UL 61010-1, CAN/CSA-C22.2, CAT IV 1000 V
MFR: Fluke
MFR #: FLK2AC/90-1000VC
UPC: 095969564427
Item #: 117640
In Stock -
$39.99 each
Availability
Location Available Qty
Electrical tester with OpenJaw Current, 600 V and 4 mm detachable probes. The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.
Fluke
Electrical tester with OpenJaw Current, 600 V and 4 mm detachable probes. The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.
MFR: Fluke
MFR #: T5-600-USA
UPC: 095969053129
Item #: 84931
In Stock -
$152.99 each
Availability
Location Available Qty
The pocket-sized voltage detector. The next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home. Comes with sound and VoltBeat technology.
Fluke
The pocket-sized voltage detector. The next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home. Comes with sound and VoltBeat technology.
MFR: Fluke
MFR #: FLUKE-1AC-A1-II
UPC: 095969290784
Item #: 89960
In Stock -
$39.99 each
Availability
Location Available Qty
Troubleshoot advanced problems, perform preventive and predictive maintenance tasks in real time, to identify insulation breakdown using only one simple-to-use tool for years. Developed for commercial and industrial applications, this the only meter that gives you a high-performance DMM, a state-of-the-art insulation tester, and wireless connectivity for sharing and tracking results all in one unit.
Fluke
Troubleshoot advanced problems, perform preventive and predictive maintenance tasks in real time, to identify insulation breakdown using only one simple-to-use tool for years. Developed for commercial and industrial applications, this the only meter that gives you a high-performance DMM, a state-of-the-art insulation tester, and wireless connectivity for sharing and tracking results all in one unit.
MFR: Fluke
MFR #: FLUKE-1587-FC
UPC: 095969796620
Item #: 519137
Available to Order
$989.99 each
Availability
Location Available Qty
This new combo kit is based on the Fluke 87V and includes special accessories to make industrial troubleshooting even more productive. Save over 15 compared with the individual purchase price of all the accessories.
Fluke
This new combo kit is based on the Fluke 87V and includes special accessories to make industrial troubleshooting even more productive. Save over 15 compared with the individual purchase price of all the accessories.
MFR: Fluke
MFR #: FLUKE-87-5/E2-KIT
UPC: 095969353212
Item #: 138100
In Stock -
$685.99 each
Availability
Location Available Qty
Electrician's Dream. With its precision, reliability and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems. The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09 basic accuracy, a digital display with analog bar graph and backlight.
Fluke
Electrician's Dream. With its precision, reliability and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems. The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09 basic accuracy, a digital display with analog bar graph and backlight.
MFR: Fluke
MFR #: FLUKE-177-ESFP
UPC: 095969095198
Item #: 30256
Available to Order
$407.99 each
Availability
Location Available Qty
FLUORESCENT LIGHT TSTR
Fluke
FLUORESCENT LIGHT TSTR
MFR: Fluke
MFR #: FLUKE-1000FLT
UPC: 095969724760
Item #: 241875
Available to Order
$299.99 each
Availability
Location Available Qty
Electrical tester with FieldSense technology lets you measure AC voltage and AC current with or without test leads. Its compact design lets you access tight spaces that were previously not possible. With FieldSense selected, slide the open jaw around a cable and measure up to 200 A and 1000 V without breaking the circuit. The backlit display shows both values simultaneously. Plus, with frequency measuring and resistance measurement up to 100 kO, the T6 is the perfect front-line tool for your tool bag.
Fluke
Electrical tester with FieldSense technology lets you measure AC voltage and AC current with or without test leads. Its compact design lets you access tight spaces that were previously not possible. With FieldSense selected, slide the open jaw around a cable and measure up to 200 A and 1000 V without breaking the circuit. The backlit display shows both values simultaneously. Plus, with frequency measuring and resistance measurement up to 100 kO, the T6 is the perfect front-line tool for your tool bag.
MFR: Fluke
MFR #: T6-1000
UPC: 095969854047
Item #: 730013
In Stock -
$349.99 each
Availability
Location Available Qty
Amprobe
Designed for safe, non-contact voltage detection, Amprobe's reliable volt tester, this Non-Contact Volt Probe doesnt require much budget or demand much space. This volt tester fit conveniently in a shirt pocket, tool belt or pouch.
MFR: Fluke
MFR #: VP-440
UPC: 095969369312
Item #: 82897
In Stock -
$37.99 each
Availability
Location Available Qty
Amprobe
Easily check and confirm proper wiring of electrical receptacles with this Receptacle Tester. Quickly confirm that GFCI breakers are properly wired for protection.
MFR: Fluke
MFR #: ST-102B
UPC: 095969625005
Item #: 57075
Available to Order
$19.99 each
Availability
Location Available Qty
The Soft Carrying Case opens laterally to allow use of the test tool without removing it from the case and includes a strap to secure the test tool. It's made of a durable polyester 600D case construction for long life and is compatible with the Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools.
Fluke
The Soft Carrying Case opens laterally to allow use of the test tool without removing it from the case and includes a strap to secure the test tool. It's made of a durable polyester 600D case construction for long life and is compatible with the Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools.
MFR: Fluke
MFR #: C35
UPC: 095969400077
Item #: 162053
Available to Order
$39.99 each
Availability
Location Available Qty
Durable vinyl exterior zippered carrying case. Has belt look and an inner pocket to store test leads or small accessories. Compatible with T100 series (T100, T120 and T140) Voltage and Continuity Testers, Fluke 330 series Clamp Meters, and Fluke T5 Electrical Tester.
Fluke
Durable vinyl exterior zippered carrying case. Has belt look and an inner pocket to store test leads or small accessories. Compatible with T100 series (T100, T120 and T140) Voltage and Continuity Testers, Fluke 330 series Clamp Meters, and Fluke T5 Electrical Tester.
MFR: Fluke
MFR #: C33
UPC: 095969130202
Item #: 150864
In Stock -
$49.99 each
Availability
Location Available Qty
Meter Case
Fluke
Meter Case
MFR: Fluke
MFR #: C50
UPC: 095969009874
Item #: 72436
Available to Order
$54.99 each
Availability
Location Available Qty
Slim reach test probes for your Fluke tool.
Fluke
Slim reach test probes for your Fluke tool.
MFR: Fluke
MFR #: TP1
UPC: 095969057691
Item #: 33144
Available to Order
$27.99 each
Availability
Location Available Qty
SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair of industrial test probes (red, black). Sharp, 12 mm stainless stell tip provides reliable contact. Flexible finger barrier improves grip. Recommended for use with TL222 and TL224 test leads. CAT II 1000 V, 10 A rating, UL Listed
Fluke
SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair of industrial test probes (red, black). Sharp, 12 mm stainless stell tip provides reliable contact. Flexible finger barrier improves grip. Recommended for use with TL222 and TL224 test leads. CAT II 1000 V, 10 A rating, UL Listed
MFR: Fluke
MFR #: TP220
UPC: 095969133203
Item #: 132153
Available to Order
$27.99 each
Availability
Location Available Qty
Slim Reach Test Probes, 2mm diameter hard stainless steel probe tips
Fluke
Slim Reach Test Probes, 2mm diameter hard stainless steel probe tips
MFR: Fluke
MFR #: TP2
UPC: 095969057707
Item #: 178678
Available to Order
$27.99 each
Availability
Location Available Qty
Always on for faster, safer voltage testing. 2AC is the latest addition to the VoltAlert ac non-contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether its for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.
Fluke
Always on for faster, safer voltage testing. 2AC is the latest addition to the VoltAlert ac non-contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether its for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.
MFR: Fluke
MFR #: FLK2AC/90-1000V
UPC: 095969564434
Item #: 20103
In Stock -
$39.99 each
Availability
Location Available Qty
The T6-1000 PRO lets you measure AC voltage and current at the same time and display them on the same screen. Making voltage and current measurements has never been so easy or quick. Plus, with Visual ContinuityTM, you will not only be able to hear a beeper when checking continuity, but the screen will ight up showing you that you have continuity. Perfect for noisy, industrial environments.
Fluke
The T6-1000 PRO lets you measure AC voltage and current at the same time and display them on the same screen. Making voltage and current measurements has never been so easy or quick. Plus, with Visual ContinuityTM, you will not only be able to hear a beeper when checking continuity, but the screen will ight up showing you that you have continuity. Perfect for noisy, industrial environments.
MFR: Fluke
MFR #: T6-1000PRO/AMER
UPC: 095969921121
Item #: 1215286
In Stock -
$334.99 each
Availability
Location Available Qty
Fluke
This combo kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world, combined with the i400 AC current clamp. Together they provide the resolution and accuracy to efficiently troubleshoot any electrical system. The kit includes special accessories to make you even more productive on the job and will save over 15percent compared with the individually priced items. Plus, you'll be working with the most trusted tools in the world. True-RMS accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording give you the results you need. Backlit digital display, analog bar graph, and intuitive design make this meter intuitive to use in the most demanding conditions. Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job. Designed to withstand spikes of more than 8000 V. Audible Input Alert warning against wrong use of input jacks.
MFR: Fluke
MFR #: FLUKE-87V/IMSK
UPC: 095969493802
Item #: 137607
In Stock -
$555.99 each
Availability
Location Available Qty
The Fluke 233 remote display digital multimeter allows you to be 30 ft away from the measurement point with the innovative wireless display. With the 233, you can perform two man jobs alone and remove the hazard from the job. Imagine the possibilities. What if you could be in two places at once. The new Digital Multimeter with True RMS Fluke 233 Remote Display allows maximum flexibility in demanding measurement environments. Place the removable display where you can see it and then place the multimeter at your convenience: no more juggling the leads and the meter while stretching into tight spaces. You can now take measurements in hard to reach places, where machines or electric panels are physically separated from the limit switch or isolation, or in areas where access is restricted to users such as clean rooms or hazardous areas.
Fluke
The Fluke 233 remote display digital multimeter allows you to be 30 ft away from the measurement point with the innovative wireless display. With the 233, you can perform two man jobs alone and remove the hazard from the job. Imagine the possibilities. What if you could be in two places at once. The new Digital Multimeter with True RMS Fluke 233 Remote Display allows maximum flexibility in demanding measurement environments. Place the removable display where you can see it and then place the multimeter at your convenience: no more juggling the leads and the meter while stretching into tight spaces. You can now take measurements in hard to reach places, where machines or electric panels are physically separated from the limit switch or isolation, or in areas where access is restricted to users such as clean rooms or hazardous areas.
MFR: Fluke
MFR #: FLUKE-233
UPC: 095969496612
Item #: 81742
In Stock -
$442.99 each
Availability
Location Available Qty
1 RMS Clamp Meter, Model: 324 Series, Voltage Rating: 600 VAC/VDC, Amperage Rating: 40 - 400 AMP, Resistance: 400 - 4000 OHM, Capacitance: 100 - 1000 MFD, Accuracy: 1.5 PCT Plus/Minus 5 Digits (45 - 400 HZ) For AC Current, 1.5 PCT Plus/Minus 5 Digits For AC Voltage, 1 PCT Plus/Minus 5 Digits For DC Voltage, 1 PCT Plus/Minus 5 Digits Resistance, Display: Large, Temperature Rating: -10 To 400 DEG C Contact Temperature, Peak Hold: Yes, Dimensions: 207 IN Height X 75 IN Width X 34 IN Depth, Continuity: Less Than Or Equal To 30 OHM, Includes: Test leads, Soft case, User's manual, CAT IV 300V/CAT III 600 V Safety Rating, For Electrical Troubleshooting
Fluke
1 RMS Clamp Meter, Model: 324 Series, Voltage Rating: 600 VAC/VDC, Amperage Rating: 40 - 400 AMP, Resistance: 400 - 4000 OHM, Capacitance: 100 - 1000 MFD, Accuracy: 1.5 PCT Plus/Minus 5 Digits (45 - 400 HZ) For AC Current, 1.5 PCT Plus/Minus 5 Digits For AC Voltage, 1 PCT Plus/Minus 5 Digits For DC Voltage, 1 PCT Plus/Minus 5 Digits Resistance, Display: Large, Temperature Rating: -10 To 400 DEG C Contact Temperature, Peak Hold: Yes, Dimensions: 207 IN Height X 75 IN Width X 34 IN Depth, Continuity: Less Than Or Equal To 30 OHM, Includes: Test leads, Soft case, User's manual, CAT IV 300V/CAT III 600 V Safety Rating, For Electrical Troubleshooting
MFR: Fluke
MFR #: FLUKE-324
UPC: 095969623759
Item #: 109190
In Stock -
$264.99 each
Availability
Location Available Qty
Amprobe
This Amprobe clamp meter offers thinner jaws over standard clamp meters. Clamp meter takes AC/DC measurements and offers Capacitance and Frequency. It also offers thinner jaws over standard clamp meters allowing access to tight areas and still accommodates conductors up to 1.02''( 26mm).
MFR: Fluke
MFR #: ACD-10-PLUS
UPC: 095969417457
Item #: 133310
In Stock -
$104.99 each
Availability
Location Available Qty
Large Soft case for Fluke Digital Multimeters.
Fluke
Large Soft case for Fluke Digital Multimeters.
MFR: Fluke
MFR #: C25
UPC: 095969006378
Item #: 100153
In Stock -
$49.99 each
Availability
Location Available Qty
Lets you measure AC voltage and AC current with or without test leads. Its compact design lets you access tight spaces that were previously not possible. With FieldSense selected, slide the open jaw around a cable and measure up to 200 A and 600 V without breaking the circuit. The backlight display makes the values easy to read. Rated to 600V CAT III and with resistance measuring up to 1000 O, the T6 is the perfect front-line tool for basic troubleshooting.
Fluke
Lets you measure AC voltage and AC current with or without test leads. Its compact design lets you access tight spaces that were previously not possible. With FieldSense selected, slide the open jaw around a cable and measure up to 200 A and 600 V without breaking the circuit. The backlight display makes the values easy to read. Rated to 600V CAT III and with resistance measuring up to 1000 O, the T6 is the perfect front-line tool for basic troubleshooting.
MFR: Fluke
MFR #: T6-600
UPC: 095969854115
Item #: 730130
In Stock -
$234.99 each
Availability
Location Available Qty
The Fluke 62 MAX infrared thermometers are everything you'd expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maintenance. Small in size, extremely accurate and yet easy to use . IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop.
Fluke
The Fluke 62 MAX infrared thermometers are everything you'd expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maintenance. Small in size, extremely accurate and yet easy to use . IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop.
MFR: Fluke
MFR #: FLUKE-62-MAX
UPC: 095969620208
Item #: 88123
In Stock -
$129.99 each
Availability
Location Available Qty
The LVD2 Volt Light is a non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54 cm to 12.7 cm) from the source and red when at the source.
Fluke
The LVD2 Volt Light is a non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54 cm to 12.7 cm) from the source and red when at the source.
MFR: Fluke
MFR #: LVD2/CT
UPC: 095969516358
Item #: 84469
In Stock -
$51.99 each
Availability
Location Available Qty
C Range Infrared Window With Kwik Twist, Size: 3 IN, Viewing Aperture Diameter: 68 MM, Viewing Aperture Area: 3632 SQ-MM, Thickness: 2 MM, Maximum Temperature: Gaskets: 250 DEG C, Body: 659 DEG C, Optic: 1400 DEG C, Finish: CLIRVU Coating, NEMA Rating: Type 3/12, Enclosure: IP65, Pull-Out Strength: Up To 1388 LB, UL Listed, CSA Certified, ANSI C37.20.7, EEMACS 14-1, IEC 62271, IEC60068-2-6, IEC60068-2-3, For Outdoor And Indoor
Fluke
C Range Infrared Window With Kwik Twist, Size: 3 IN, Viewing Aperture Diameter: 68 MM, Viewing Aperture Area: 3632 SQ-MM, Thickness: 2 MM, Maximum Temperature: Gaskets: 250 DEG C, Body: 659 DEG C, Optic: 1400 DEG C, Finish: CLIRVU Coating, NEMA Rating: Type 3/12, Enclosure: IP65, Pull-Out Strength: Up To 1388 LB, UL Listed, CSA Certified, ANSI C37.20.7, EEMACS 14-1, IEC 62271, IEC60068-2-6, IEC60068-2-3, For Outdoor And Indoor
MFR: Fluke
MFR #: FLK-075-CLKT
UPC: 095969495851
Item #: 70470
In Stock -
$389.99 each
Availability
Location Available Qty
C Range Infrared Window With Kwik Twist, Size: 4 IN, Viewing Aperture Diameter: 89 MM, Viewing Aperture Area: 6322 SQ-MM, Thickness: 2 MM, Maximum Temperature: Gaskets: 250 DEG C, Body: 659 DEG C, Optic: 1400 DEG C, Finish: CLIRVU Coating, NEMA Rating: Type 3/12, Enclosure: IP65, Pull-Out Strength: Up To 1388 LB, UL Listed, CSA Certified, ANSI C37.20.7, EEMACS 14-1, IEC 62271, IEC60068-2-6, IEC60068-2-3, For Outdoor And Indoor
Fluke
C Range Infrared Window With Kwik Twist, Size: 4 IN, Viewing Aperture Diameter: 89 MM, Viewing Aperture Area: 6322 SQ-MM, Thickness: 2 MM, Maximum Temperature: Gaskets: 250 DEG C, Body: 659 DEG C, Optic: 1400 DEG C, Finish: CLIRVU Coating, NEMA Rating: Type 3/12, Enclosure: IP65, Pull-Out Strength: Up To 1388 LB, UL Listed, CSA Certified, ANSI C37.20.7, EEMACS 14-1, IEC 62271, IEC60068-2-6, IEC60068-2-3, For Outdoor And Indoor
MFR: Fluke
MFR #: FLK-100-CLKT
UPC: 095969495905
Item #: 108463
In Stock -
$514.99 each
Availability
Location Available Qty
Test Probe Adapter Set
Fluke
Test Probe Adapter Set
MFR: Fluke
MFR #: TP920
UPC: 095969106900
Item #: 34029
In Stock -
$52.99 each
Availability
Location Available Qty
INFRARED CAMERA
Amprobe
INFRARED CAMERA
MFR: Fluke
MFR #: IRC-110
UPC: 095969853835
Item #: 788040
Available to Order
$379.99 each
Availability
Location Available Qty
Fluke
Fluke 417D laser distance (meter only) The ultra-portable, durable and easy-to-use Fluke 417D Measures up to 131 ft. with accuracy of 2mm (0.08 in) Instant distance measurement with one-button operation IP54 dust and water resistant
MFR: Fluke
MFR #: FLUKE-417D
UPC: 095969912860
Item #: 1039770
Available to Order
$134.99 each
Availability
Location Available Qty
SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of small, insulated, nickel plated jaws. Blunt tip grabs round swer heads up to 9.5mm. Recommended for use with TL222 and TL224 test leads. CAT IV 600V, CAT III 1000 V, 10 A rating, UL Listed
Fluke
SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of small, insulated, nickel plated jaws. Blunt tip grabs round swer heads up to 9.5mm. Recommended for use with TL222 and TL224 test leads. CAT IV 600V, CAT III 1000 V, 10 A rating, UL Listed
MFR: Fluke
MFR #: AC220
UPC: 095969103398
Item #: 75197
Available to Order
$57.99 each
Availability
Location Available Qty
SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of large alligator clips with nickel plated jaws. Multi-purpose tooth pattern grips anything from fine guage wire to a 20 mm bolt. Recommended for use with TL222 and TL224 test leads. CAT IV 600V, CAT III 1000 V, 10 A rating, UL Listed
Fluke
SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of large alligator clips with nickel plated jaws. Multi-purpose tooth pattern grips anything from fine guage wire to a 20 mm bolt. Recommended for use with TL222 and TL224 test leads. CAT IV 600V, CAT III 1000 V, 10 A rating, UL Listed
MFR: Fluke
MFR #: AC285
UPC: 095969103428
Item #: 76286
In Stock -
$39.99 each
Availability
Location Available Qty
Fluke Bucktooth Alligator Clip Set
Fluke
Fluke Bucktooth Alligator Clip Set
MFR: Fluke
MFR #: AC173
UPC: 095969612418
Item #: 64457
Available to Order
$42.99 each
Availability
Location Available Qty
Fluke Alligator Clip Set
Fluke
Fluke Alligator Clip Set
MFR: Fluke
MFR #: AC175
UPC: 095969612425
Item #: 153090
Available to Order
$42.99 each
Availability
Location Available Qty
Special value starter kit for the electrical professional who already owns a Fluke T5 Electrical Tester or is thinking of buying one. Includes sharp test probes, alligator clips for hands free connections and a soft carry case to protect your tester when not in use and store your accessories.
Fluke
Special value starter kit for the electrical professional who already owns a Fluke T5 Electrical Tester or is thinking of buying one. Includes sharp test probes, alligator clips for hands free connections and a soft carry case to protect your tester when not in use and store your accessories.
MFR: Fluke
MFR #: T5-KIT
UPC: 095969241816
Item #: 138522
Available to Order
$79.99 each
Availability
Location Available Qty
The Fluke 370 FC Series offers advanced troubleshooting performance. The iFlex flexible current probe allows for easy measurement around wires in tight spaces. In addition, all three clamps are now part of the Fluke Connect family of wireless test tools. Clamp Meter with operating temperatur -10 Deg C to +50 Deg C, 6000 OHMS.
Fluke
The Fluke 370 FC Series offers advanced troubleshooting performance. The iFlex flexible current probe allows for easy measurement around wires in tight spaces. In addition, all three clamps are now part of the Fluke Connect family of wireless test tools. Clamp Meter with operating temperatur -10 Deg C to +50 Deg C, 6000 OHMS.
MFR: Fluke
MFR #: FLUKE-374/FC
UPC: 095969798532
Item #: 451019
Available to Order
$467.99 each
Availability
Location Available Qty
The Fluke 370 FC Series offers advanced troubleshooting performance. The iFlex flexible current probe allows for easy measurement around wires in tight spaces. In addition, all three clamps are now part of the Fluke Connect family of wireless test tools. Clamp Meter with operating temperatur -10 Deg C to +50 Deg C, 60000 OHMS with IFLEX clip.
Fluke
The Fluke 370 FC Series offers advanced troubleshooting performance. The iFlex flexible current probe allows for easy measurement around wires in tight spaces. In addition, all three clamps are now part of the Fluke Connect family of wireless test tools. Clamp Meter with operating temperatur -10 Deg C to +50 Deg C, 60000 OHMS with IFLEX clip.
MFR: Fluke
MFR #: FLUKE-376/FC
UPC: 095969798396
Item #: 446565
Available to Order
$592.99 each
Availability
Location Available Qty
The best of the basics. With true-rms ac voltage and current measurements, the Fluke 373 Clamp Meter reads up to 600 A ac and 600 V ac or dc. Be ready for anything. The new Fluke 373 Clamp Meter offers improved performance perfect for any ac only current measurement situations. Featuring true-rms ac voltage and current measurements, and resistance measurement up to 6000O with continuity detection, the Fluke 373 is everything you need, plus a little more.
Fluke
The best of the basics. With true-rms ac voltage and current measurements, the Fluke 373 Clamp Meter reads up to 600 A ac and 600 V ac or dc. Be ready for anything. The new Fluke 373 Clamp Meter offers improved performance perfect for any ac only current measurement situations. Featuring true-rms ac voltage and current measurements, and resistance measurement up to 6000O with continuity detection, the Fluke 373 is everything you need, plus a little more.
MFR: Fluke
MFR #: FLUKE-373
UPC: 095969557832
Item #: 34747
In Stock -
$299.99 each
Availability
Location Available Qty
Electrical tester with OpenJaw Current, 1000 V and 4 mm detachable probes. The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.
Fluke
Electrical tester with OpenJaw Current, 1000 V and 4 mm detachable probes. The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.
MFR: Fluke
MFR #: T5-1000-USA
UPC: 095969053112
Item #: 57019
In Stock -
$194.99 each
Availability
Location Available Qty
Electrical Tester has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, the tester is an excellent choice for most residential, commercial, and industrial applications. The 1AC-II is the pocket-sized voltage detector that can quickly test for energized circuits a must have for any electrician.
Fluke
Electrical Tester has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, the tester is an excellent choice for most residential, commercial, and industrial applications. The 1AC-II is the pocket-sized voltage detector that can quickly test for energized circuits a must have for any electrician.
MFR: Fluke
MFR #: T+PRO
UPC: 095969327923
Item #: 108542
In Stock -
$132.99 each
Availability
Location Available Qty
VoltAlert Electrical Tester, Voltage Rating: 90 - 1000 VAC, Operating Temperature: -10 To 50 DEG C, Enclosure: IP40, Battery: (2) AAA Alkaline, C/US UL Listed, CSA Certified, CE Certified
Fluke
VoltAlert Electrical Tester, Voltage Rating: 90 - 1000 VAC, Operating Temperature: -10 To 50 DEG C, Enclosure: IP40, Battery: (2) AAA Alkaline, C/US UL Listed, CSA Certified, CE Certified
MFR: Fluke
MFR #: FLK-1AC-A1-II-5PK
UPC: 095969290890
Item #: 64340
Available to Order
$182.99 each
Availability
Location Available Qty
The pocket-sized voltage detector. The next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know theres voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
Fluke
The pocket-sized voltage detector. The next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know theres voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
MFR: Fluke
MFR #: FLUKE-1LAC-A-II
UPC: 095969290876
Item #: 121410
Available to Order
$39.99 each
Availability
Location Available Qty
Work with the best. The Fluke 323 True-rms Clamp Meter is a great clamp meter for general, grab-and-go troubleshooting needs. Fluke rugged. Fluke reliable. Fluke precise. True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
Fluke
Work with the best. The Fluke 323 True-rms Clamp Meter is a great clamp meter for general, grab-and-go troubleshooting needs. Fluke rugged. Fluke reliable. Fluke precise. True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
MFR: Fluke
MFR #: FLUKE-323
UPC: 095969623742
Item #: 118578
In Stock -
$184.99 each
Availability
Location Available Qty