Wire and Cable Management

Showing 1 - 48 of 248 Items
Filters Clear Filters
expand_less Brand (2)
+ Show 57 More
expand_less Ways to Shop
expand_less Material
expand_less Color
expand_less Thickness
+ Show 2 More
expand_less Length
+ Show 1 More
  • Ideal
  • Scotchlok
Scotchlok
3M(TM) Cold Shrink QS-III Splice Kits 5775A-MT, 2-4/0 AWG (35-95 mm2), 1 per case
MFR: 3M Electrical Products
MFR #: 5775A-MT
UPC: 051128534939
Item #: 176300
Available to Order
$3100.04 each
Availability
Location Available Qty
Ideal
IDEAL, UF Splice Kit, Thermo-Shrink, UF Splice Kits, Cable Size: 14 - 8 AWG
MFR: Ideal Industries
MFR #: 46-400
UPC: 783250464005
Item #: 182784
In Stock -
$25.05 each
Availability
Location Available Qty
Ideal
Duct Seal, Dark Gray Putty, Size: 1 LB Block, Specific Gravity: 1.65, Base Content: Butyl Rubber Composite
MFR: Ideal Industries
MFR #: 31-601
UPC: 783250316014
Item #: 68339
In Stock -
$6.38 each
Availability
Location Available Qty
Ideal
IDEAL, Strap, Service, Cable Size: 4/0 AWG SER Cable And 4/0 AWG SEU Cable, Material: Smooth Plastic, Color: Grey, Insulation: Insulated, Finish: Zinc-Plated Nails
MFR: Ideal Industries
MFR #: BSER4/0-5
UPC: 781789455679
Item #: 6861
In Stock -
$0.57 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 6 - 2 AWG, Nominal Recoveredi.d. (max.): 0.240 IN, Expanded I.d. (min.): 0.750, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-750
MFR: Ideal Industries
MFR #: 46-348
UPC: 783250463480
Item #: 15333
In Stock -
$12.94 each
Availability
Location Available Qty
Ideal
IDEAL, Underground Splice Kit, Thermo-Shrink, Al/Cu Splice Kits, Cable Size: 4 - 1/0 AWG, Voltage Rating: 600 V, Operating Temperature: 105 DEG C
MFR: Ideal Industries
MFR #: 46-402
UPC: 783250464029
Item #: 184212
In Stock -
$24.56 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 1/4 IN, Thickness: 022 IN, Length: 4 FT, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielectric Strength: ASTM D 150, 20 KV/MM, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 14 - 8 AWG, Nominal Recoveredi.d. (max.): 0.126 IN, Expanded I.d. (min.): 0.268, Elongation At Break: 600 PCT ASTM D 638, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Cold Bend Test (-55c/4 Hours): No Cracking For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 1/4 IN, Package: Disk
MFR: Ideal Industries
MFR #: 46-605
UPC: 783250466054
Item #: 165947
In Stock -
$22.89 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.120 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 1 - 3/0 AWG, Nominal Recoveredi.d. (max.): 0.350 IN, Expanded I.d. (min.): 1.100, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1100
MFR: Ideal Industries
MFR #: 46-352
UPC: 783250463527
Item #: 180143
In Stock -
$13.54 each
Availability
Location Available Qty
Ideal
IDEAL, Underground Splice Kit, Thermo-Shrink, Al/Cu Splice Kits, Cable Size: 1/0 AWG - 250 KCMIL, Voltage Rating: 600 V, Operating Temperature: 105 DEG C
MFR: Ideal Industries
MFR #: 46-403
UPC: 783250464036
Item #: 171320
In Stock -
$41.60 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 12 - 10 AWG, Stud Size: 10 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7221
UPC: 783250490202
Item #: 60089
In Stock -
$0.68 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 16 - 14 AWG, Stud Size: 8 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7161
UPC: 783250490165
Item #: 48563
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Underground Splice Kit, Thermo-Shrink, Al/Cu Splice Kits, Cable Size: 8 - 4 AWG, Voltage Rating: 600 V, Operating Temperature: 105 DEG C
MFR: Ideal Industries
MFR #: 46-401
UPC: 783250464012
Item #: 183492
In Stock -
$19.80 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 12 - 10 AWG, Stud Size: 8 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7211
UPC: 783250490196
Item #: 55233
In Stock -
$0.68 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Snap Spade, Cable Size: 12 - 10 AWG, Stud Size: 10 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7091
UPC: 783250490103
Item #: 15400
In Stock -
$0.68 each
Availability
Location Available Qty
Ideal
IDEAL, Cable Staple, Cable Type: ROMEX, Non-Metallic And Underground Feeder Cable, Staple Size: 1/2 IN, Material: Smooth Plastic, Color: White, Insulation: Insulated, Finish: Zinc-Plated Nails, Nail Type: Standard
MFR: Ideal Industries
MFR #: BPS2-JRL
UPC: 783250563838
Item #: 115810
In Stock -
$19.13 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 3/8 IN, Thickness: 022 IN, Length: 4 FT, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielectric Strength: ASTM D 150, 20 KV/MM, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 8 - 4 AWG, Nominal Recoveredi.d. (max.): 0.185 IN, Expanded I.d. (min.): 0.421, Elongation At Break: 600 PCT ASTM D 638, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Cold Bend Test (-55c/4 Hours): No Cracking For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 3/8 IN, Package: Disk
MFR: Ideal Industries
MFR #: 46-607
UPC: 783250466078
Item #: 49259
Available to Order
$25.36 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Number Of Holes: 1, Stud Size: 1/4 IN, Material: Tin Plated Brass, Insulation: Vinyl Insulated
MFR: Ideal Industries
MFR #: 83-2351
UPC: 783250489886
Item #: 30912
In Stock -
$0.81 each
Availability
Location Available Qty
Ideal
IDEAL, Cable Staple, Cable Type: ROMEX, Non-Metallic And Underground Feeder Cable, Staple Size: 1/2 IN, Material: Smooth Plastic, Color: White, Insulation: Insulated, Finish: Zinc-Plated Nails, Nail Type: Standard
MFR: Ideal Industries
MFR #: BPS2-50
UPC: 783250580927
Item #: 127259
In Stock -
$4.36 each
Availability
Location Available Qty
Ideal
Duct Seal, Dark Gray Putty, Size: 5 LB Block, Specific Gravity: 1.65, Base Content: Butyl Rubber Composite
MFR: Ideal Industries
MFR #: 31-605
UPC: 783250316052
Item #: 34135
In Stock -
$22.92 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Number Of Holes: 1, Stud Size: 10 IN, Material: Tin Plated Brass, Insulation: Vinyl Insulated
MFR: Ideal Industries
MFR #: 83-2341
UPC: 783250489879
Item #: 30262
In Stock -
$0.63 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 16 - 14 AWG, Stud Size: 10 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7171
UPC: 783250490172
Item #: 52975
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 1/2 IN, Thickness: 026 IN, Length: 4 FT, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielectric Strength: ASTM D 150, 20 KV/MM, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 4 - 1 AWG, Nominal Recoveredi.d. (max.): 0.252 IN, Expanded I.d. (min.): 0.539, Elongation At Break: 600 PCT ASTM D 638, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Cold Bend Test (-55c/4 Hours): No Cracking For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 1/2 IN, Package: Disk
MFR: Ideal Industries
MFR #: 46-608
UPC: 783250466085
Item #: 49979
In Stock -
$25.66 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Stud Size: 8 IN, Number Of Holes: 1, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-2331
UPC: 783250489862
Item #: 146500
In Stock -
$0.63 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.160 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 4/0 AWG - 400 MCM, Nominal Recoveredi.d. (max.): 0.470 IN, Expanded I.d. (min.): 1.500, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1500
MFR: Ideal Industries
MFR #: 46-356
UPC: 783250463565
Item #: 180871
In Stock -
$21.86 each
Availability
Location Available Qty
Ideal
IDEAL, Mounting Pad, Mount Size: 0.990 IN Width X 0.200 IN Height, Material: Nylon, Color: Natural, Slot Height: 060 IN, Slot Width: 0.200 IN, Screw Diameter: #6
MFR: Ideal Industries
MFR #: IT1000MP-C
UPC: 783250575169
Item #: 184191
In Stock -
$0.63 each
Availability
Location Available Qty
Ideal
IDEAL, Clamp, Staple Size: 3/8 IN Width X 050 IN Thickness X 0.250 IN Closed Diameter, Material: Nylon, Color: Natural, Mounting: 0.203 IN Hole X 0.421 IN Center To Center
MFR: Ideal Industries
MFR #: IT250CCL-C
UPC: 783250586301
Item #: 57195
Available to Order
$0.14 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.120 IN, Length: 48 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 1 - 3/0 AWG, Nominal Recoveredi.d. (max.): 0.350 IN, Expanded I.d. (min.): 1.100, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1100
MFR: Ideal Industries
MFR #: 46-354
UPC: 783250463541
Item #: 108401
In Stock -
$52.98 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 16 - 14 AWG, Stud Size: 6 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7151
UPC: 783250490158
Item #: 49170
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 12 - 10 AWG, Stud Size: 1/4 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7231
UPC: 783250490257
Item #: 49939
In Stock -
$0.68 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 16 - 14 AWG, Stud Size: 10 IN, Number Of Holes: 1, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-2241
UPC: 783250489831
Item #: 23922
In Stock -
$0.49 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 3/4 IN, Thickness: 027 IN, Length: 4 FT, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielectric Strength: ASTM D 150, 20 KV/MM, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 2 AWG - 250 KCMIL, Nominal Recoveredi.d. (max.): 0.374 IN, Expanded I.d. (min.): 0.807, Elongation At Break: 600 PCT ASTM D 638, Cold Bend Test (-55c/4 Hours): No Cracking For UL 224 Test Method, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 3/4 IN, Package: Disk
MFR: Ideal Industries
MFR #: 46-609
UPC: 783250466092
Item #: 4163
In Stock -
$32.26 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 6 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 6 - 1 AWG, Nominal Recoveredi.d. (max.): 0.240 IN, Expanded I.d. (min.): 0.750, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-750
MFR: Ideal Industries
MFR #: 46-347
UPC: 783250463473
Item #: 64060
Available to Order
$12.04 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 060 IN, Length: 9 IN, Dielectric Strength: 500 V/MIL (20 KV MINT), Volume Resistivity: 1013 OHM -CM MIN, Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 8 - 6 AWG, Nominal Recoveredi.d. (max.): 0.150 IN, Expanded I.d. (min.): 0.400, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-400
MFR: Ideal Industries
MFR #: 46-344
UPC: 783250463442
Item #: 14694
In Stock -
$14.11 each
Availability
Location Available Qty
Ideal
IDEAL, Cable Tie, Powr-Tie, Standard, Plenum, Length: 7.500 IN, Width: 0.178 IN, Thickness: 053 IN, Bundle Diameter: 1/16 To 1-7/8 IN, Material: Nylon, Color: Natural, Tensile Strength: 50 LB
MFR: Ideal Industries
MFR #: IT2S-C
UPC: 783250574391
Item #: 112688
Available to Order
$0.13 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 3/16 IN, Thickness: 020 IN, Length: 4 FT, Dielectric Strength: ASTM D 150, 20 KV/MM, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 20 - 14 AWG, Nominal Recoveredi.d. (max.): 094 IN, Expanded I.d. (min.): 0.205, Elongation At Break: 600 PCT ASTM D 638, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Cold Bend Test (-55c/4 Hours): No Cracking For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 3/16 IN, Package: Disk
MFR: Ideal Industries
MFR #: 46-604
UPC: 783250466047
Item #: 164037
In Stock -
$22.18 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 12 - 10 AWG, Stud Size: 6 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7201
UPC: 783250490189
Item #: 72476
In Stock -
$0.68 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Snap Spade, Cable Size: 16 - 14 AWG, Stud Size: 10 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7071
UPC: 783250490080
Item #: 137260
Available to Order
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 22 - 18 AWG, Stud Size: 8 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7121
UPC: 783250490134
Item #: 39944
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Number Of Holes: 1, Stud Size: 5/16 IN, Material: Tin Plated Brass, Insulation: Vinyl Insulated
MFR: Ideal Industries
MFR #: 83-2361
UPC: 783250489893
Item #: 159180
In Stock -
$0.82 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Snap Spade, Cable Size: 16 - 14 AWG, Stud Size: 8 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7061
UPC: 783250490073
Item #: 82845
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 22 - 18 AWG, Stud Size: 6 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7111
UPC: 783250490127
Item #: 88685
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 48 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 6 - 2 AWG, Nominal Recoveredi.d. (max.): 0.240 IN, Expanded I.d. (min.): 0.750, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-750
MFR: Ideal Industries
MFR #: 46-350
UPC: 783250463503
Item #: 146543
Available to Order
$44.95 each
Availability
Location Available Qty
Ideal
IDEAL, Clamp, Staple Size: 1/2 IN Width X 060 IN Thickness X 0.500 IN Closed Diameter, Material: Nylon, Color: Natural, Mounting: 0.203 IN Hole X 0.553 IN Center To Center
MFR: Ideal Industries
MFR #: IT500CCL2-C
UPC: 783250575251
Item #: 9102
Available to Order
$0.16 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Stud Size: 3/8 IN, Number Of Holes: 1, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-2371
UPC: 783250489909
Item #: 159835
In Stock -
$0.81 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Snap Spade, Cable Size: 12 - 10 AWG, Stud Size: 8 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7081
UPC: 783250490097
Item #: 86883
Available to Order
$0.68 each
Availability
Location Available Qty
Ideal
IDEAL, Male Terminal, Cable Size: 16 - 14 AWG, Insulation: Vinyl Insulated, Tab Size: 0.250 X 032 IN
MFR: Ideal Industries
MFR #: 83-9981
UPC: 783250490783
Item #: 36077
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 060 IN, Length: 6 IN, Dielectric Strength: 500 V/MIL (20 KV MINT), Volume Resistivity: 1013 OHM -CM MIN, Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 12 - 6 AWG, Nominal Recoveredi.d. (max.): 0.150 IN, Expanded I.d. (min.): 0.400, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-400
MFR: Ideal Industries
MFR #: 46-343
UPC: 783250463435
Item #: 14152
In Stock -
$9.80 each
Availability
Location Available Qty
Ideal
Buchanan, Cable Tie, Multi-Purpose, Standard, Width: 0.181 IN, Length: 8 IN, Thickness: 057 IN, Material: Nylon, Color: UV Black, Tensile Strength: 50 LB
MFR: Ideal Industries
MFR #: B-8-50-0-C
UPC: 783250572748
Item #: 123332
Available to Order
$0.06 each
Availability
Location Available Qty