Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 6 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 6 - 1 AWG, Nominal Recoveredi.d. (max.): 0.240 IN, Expanded I.d. (min.): 0.750, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-750
MFR: Ideal Industries
MFR #: 46-347
UPC: 783250463473
Item #: 64060
Ideal Industries
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 6 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 6 - 1 AWG, Nominal Recoveredi.d. (max.): 0.240 IN, Expanded I.d. (min.): 0.750, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-750
MFR #: 46-347
UPC: 783250463473
Item #: 64060
Availability
| Location | Available Qty |
|---|---|
| Available | Available to Order |
$12.0399
each
TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratioAdhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applicationsMaximum flame retardancyMeets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirementsRated for 600V, 90C continuous use
Catalog Number
46-347
Manufacturer
Ideal Industries
Brand
Ideal
Sub Brand
Thermo-Shrink®
Country of Origin
United States
Made in USA
Yes
Special Features
Features: TS-46 irradiated cross-linked polyolefin with 3:1 standard shrink ratio; Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications; Maximum flame retardancy; Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements; Continuous operating temperature from -55 Degrees C to 110 Degrees C; Rated for 600V, 90 Degrees C continuous use; Shrink temperature of 120 Degrees C; Ultimate Elongation: 600 PCT min; Secant Modulus @ 2 PCT Strain: 25,000 PSI max; Specific Gravity: 1.20 max; Cable Range: 6 - 1 AWG; Nominal Recoveredi.d. (max.): 0.240 IN; Expanded I.d. (min.): 0.750; Copper Corrosion: Non-Corrosive; Ultimate Elongation: 600 PCT Min.; Model: TS-46-750
Standard
CSA, UL Listed,RoHS
UPC
783250463473
GTIN
00783250463473
Item Type
Heavy-Wall Heat Shrink Tubing
Length
6
Length UOM
Inch
Thickness
090 IN