Wiring Devices and Accessories

Showing 1 - 48 of 99 Items
Filters Clear Filters
expand_less Brand (3)
+ Show 63 More
expand_less Ways to Shop
expand_less Material
expand_less Color
expand_less Mounting
expand_less Construction
  • Generac
  • Pos-E-Kon
  • TayMac
Pos-E-Kon
Non-metallic dust cover. For use with single lever housing, series A16 and D25.
MFR: ABB - Installation Products
MFR #: DCL116A-1
UPC: 786210791623
Item #: 701096
In Stock -
$28.95 each
Availability
Location Available Qty
Pos-E-Kon
Pos-E-Kon Connector Key pin for polarized connector.
MFR: ABB - Installation Products
MFR #: PC600
UPC: 786210836638
Item #: 98480
In Stock -
$3.68 each
Availability
Location Available Qty
Pos-E-Kon
Metric ISO (M32) to NPT (1 Inch ) thread adapter
MFR: ABB - Installation Products
MFR #: M32-100
UPC: 786210945712
Item #: 286787
Available to Order
$64.65 each
Availability
Location Available Qty
Generac
An integrated solar + storage system with load management for whole home coverage is made easy with the PWRcell ATS. The 100A service entrance rated PWRcell Automatic Transfer Switch (ATS) unlocks whole home backup power. The PWRcell ATS allows the PWRcell system to island the entire home and manage up to four individual HVAC (24 Vac controlled) loads during a utility power outage.
MFR: Generac
MFR #: CXSW100A3
UPC: 696471081718
Item #: 1326264
In Stock -
$757.90 each
Availability
Location Available Qty
Pos-E-Kon
Metric ISO (M25) to NPT (3/4 Inch ) thread adapter
MFR: ABB - Installation Products
MFR #: M25-75
UPC: 786210945705
Item #: 146846
In Stock -
$49.58 each
Availability
Location Available Qty
Pos-E-Kon
Metric ISO (M20) to NPT (1/2 Inch ) thread adapter
MFR: ABB - Installation Products
MFR #: M20-50
UPC: 786210945699
Item #: 102015
Available to Order
$32.95 each
Availability
Location Available Qty
TAYMAC
3-Gang MASQUE? 5000 Wallplate, Decorator, White
MFR: Raco-Taymac-Bell, a Hubbell affiliate
MFR #: 5550W
UPC: 092326101493
Item #: 1395903
Available to Order
$58.55 each
Availability
Location Available Qty
Generac
Generacs Smart Management Modules (SMMs) allow PWRcell to make the most of its leading backup power and capacity by helping to manage power usage and to prevent overload. This 100A SMM can be used to manage individual appliances or entire branch circuits. Combine up to eight individual SMMs on a single PWRcell installation to ensure power is sent to the appliances that need it most during an outage.
MFR: Generac
MFR #: 7006
UPC: 696471077520
Item #: 1399934
Available to Order
$321.19 each
Availability
Location Available Qty
Generac
This automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker and a smart A/C module incorporating fuses and two terminal blocks for transfer switch connections.
MFR: Generac
MFR #: RXSW400A3CUL
UPC: 696471075717
Item #: 1349431
Available to Order
$3496.90 each
Availability
Location Available Qty
Generac
This automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker and a smart A/C module incorporating fuses and two terminal blocks for transfer switch connections.
MFR: Generac
MFR #: RXSW100A3CUL
UPC: 696471074819
Item #: 1400711
Available to Order
$768.90 each
Availability
Location Available Qty
Generac
This automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker and a smart A/C module incorporating fuses and two terminal blocks for transfer switch connections.
MFR: Generac
MFR #: RXSW200A3CUL
UPC: 696471074802
Item #: 1350076
Available to Order
$1010.90 each
Availability
Location Available Qty
Generac
EASIER THAN EVER BEFORE - Generacs 9854 HomeLink Upgradeable Manual Transfer Switches are now easier to install, expand and maintain than ever before. To meet the requirements of 2017 National Electric Codes, improved 30-amp and 50-amp HomeLink models can be used with any portable generator featuring compatible GFCI outlets. With interchangeable circuit breakers that simplify the reconfiguration process required for replacing or expanding from 8 to 16 circuits, HomeLink switches can be used to provide power to hard-wired loads such as your homes furnace, well pump or lights. Unlike other manual transfer switches available to the general public, HomeLink models can also be upgraded for automatic functionality with home standby generators up to 11 kW by simply changing out the original controller assembly. Pre-wired for easy installation, these updated switch models also feature an electronic rocker button that seamlessly switches between utility and generator power. Indicator lights identify the presence of utility and/or generator power, and bundled options are currently available with cords and power inlet boxes included. Thanks to the re-launch of Generacs HomeLink Upgradeable Manual Transfer Switches, protecting your desired loads and transitioning from portable power to an automatic standby solution is easier than ever before.
MFR: Generac
MFR #: 9854
UPC: 696471071481
Item #: 1402449
Available to Order
$681.99 each
Availability
Location Available Qty
Generac
This accessory allows installers to combine 2 CTs per port on the PWRview Home Energy Monitor (W2HEM). Multiple residential electrical panels can be combined into one PWRview so that you can analyze the consumption data for each. Note that this kit is compatible with PWRview specific CTs (UCT2) and is unnecessary for PWRcell solar + storage systems.
MFR: Generac
MFR #: SYCOM2
UPC: 696471079302
Item #: 1371477
Available to Order
$25.29 each
Availability
Location Available Qty
TAYMAC
Decorator Covers Wallplates, Toggle, White
MFR: Raco-Taymac-Bell, a Hubbell affiliate
MFR #: 2670W
UPC: 050169504260
Item #: 1033880
Available to Order
$45.68 each
Availability
Location Available Qty
TAYMAC
Decorator Covers Wallplates, Duplex, White
MFR: Raco-Taymac-Bell, a Hubbell affiliate
MFR #: 2600W
UPC: 050169504253
Item #: 1033844
Available to Order
$27.46 each
Availability
Location Available Qty
TAYMAC
MASQUE REVIVE DECORATOR PLT WHT - 2-DUPLEX
MFR: Raco-Taymac-Bell, a Hubbell affiliate
MFR #: 2602W
UPC: 050169504291
Item #: 851382
Available to Order
$49.90 each
Availability
Location Available Qty
TAYMAC
Decorator Covers Wallplates, Toggle/Duplex, White
MFR: Raco-Taymac-Bell, a Hubbell affiliate
MFR #: 2772W
UPC: 050169504314
Item #: 1033881
Available to Order
$54.39 each
Availability
Location Available Qty
TAYMAC
Decorator Covers Wallplates, 3-Toggle, White
MFR: Raco-Taymac-Bell, a Hubbell affiliate
MFR #: 2673W
UPC: 050169504284
Item #: 1289763
Available to Order
$119.91 each
Availability
Location Available Qty
TAYMAC
Decorator Covers Wallplates, 2-Toggle, White
MFR: Raco-Taymac-Bell, a Hubbell affiliate
MFR #: 2672W
UPC: 050169504277
Item #: 1289760
Available to Order
$79.94 each
Availability
Location Available Qty
Generac
These CTs are compatible with the PWRview Home Energy Monitor (W2HEM) and are factory calibrated and encoded to enable the meter to automatically configure to the installed CT's. Note that these CTs are not compatible with PWRcell solar + storage systems. Use PWRcell Accessory Kit (APKE00032) with PWRcell inverters and Automatic Transfer Switches.
MFR: Generac
MFR #: UCT2
UPC: 696471079326
Item #: 1371479
Available to Order
$95.69 each
Availability
Location Available Qty
Generac
Extend the leads on a set of CTs for the PWRview Home Energy Monitor (W2HEM) by 10ft . Includes two 10ft extender harnesses. Note that this kit is compatible with PWRview specific CTs (UCT2) and is unnecessary for PWRcell solar + storage systems.
MFR: Generac
MFR #: SCTE2
UPC: 696471079319
Item #: 1371478
Available to Order
$25.29 each
Availability
Location Available Qty
Generac
The CT accessory kit includes two PWRcell Current Transformers (CTs) and an enternet adapter. This kit can be used to replace lost or damaged CTs or to provide an additional set of CTs for split electrical services.
MFR: Generac
MFR #: APKE00032
UPC: 696471080964
Item #: 1371465
Available to Order
$131.99 each
Availability
Location Available Qty
Generac
PWRcell Battery Cabinet Display Cover
MFR: Generac
MFR #: DISPCVR002
UPC: 696471085709
Item #: 1371475
Available to Order
$1451.99 each
Availability
Location Available Qty
Generac
The PWRcell Upgrade Kit replaces lost or misplaced hardware. It consists of grounding tabs, retention clips, and screws for adding additional battery modules to a PWRcell Battery cabinet (APKE00007 or APKE00028) in the event that the original hardware has been lot or misplaced.
MFR: Generac
MFR #: APKE00009
UPC: 696471080605
Item #: 1371464
Available to Order
$170.49 each
Availability
Location Available Qty
Generac
PWRcell Inverter Display Cover
MFR: Generac
MFR #: DISPCVR001
UPC: 696471084993
Item #: 1371474
Available to Order
$835.99 each
Availability
Location Available Qty
Generac
PWRcell ATS Controller Kit
MFR: Generac
MFR #: 8006
UPC: 696471085624
Item #: 1371457
Available to Order
$170.49 each
Availability
Location Available Qty
Pos-E-Kon
Molded Edge Contour Gasket, 1.16 inch, 29.5mm, X 2.48 inch, 63mm. Neoprene, For use on Pos-E-Kon housings and hoods. 10 pieces.
MFR: ABB - Installation Products
MFR #: A10XMEC
UPC: 786210763569
Item #: 29025
Available to Order
$7.13 each
Availability
Location Available Qty
Pos-E-Kon
Metric cord grip connector, Metric Thread PG11. Metric Cable Seal Connector.
MFR: ABB - Installation Products
MFR #: CG11-38
UPC: 786210832654
Item #: 143297
Available to Order
$10.00 each
Availability
Location Available Qty
Pos-E-Kon
Non-metallic dust cover. For use with double-lever housing, series B10, DD42, T10 and V3.
MFR: ABB - Installation Products
MFR #: DCL210B-1
UPC: 786210791746
Item #: 129131
Available to Order
$52.15 each
Availability
Location Available Qty
Pos-E-Kon
Non-metallic dust cover. For use with double-lever housing, series B24, D64, DD108, K12, T24, V10 and V16.
MFR: ABB - Installation Products
MFR #: DCL224B-1
UPC: 786210791784
Item #: 32142
Available to Order
$63.60 each
Availability
Location Available Qty
Pos-E-Kon
Female Contact, 12 AWG (4.0 SQ mm) Series A, B and V
MFR: ABB - Installation Products
MFR #: FP1200
UPC: 786210789095
Item #: 65574
Available to Order
$2.43 each
Availability
Location Available Qty
Pos-E-Kon
Metric PG29 to 1 Inch NPT thread adapter.
MFR: ABB - Installation Products
MFR #: PG29-100
UPC: 786210794402
Item #: 8764
Available to Order
$54.28 each
Availability
Location Available Qty
Pos-E-Kon
Guiding Sleeve, Silver-Plated Copper, For all Pos-E-Kon series.
MFR: ABB - Installation Products
MFR #: FG602
UPC: 786210665085
Item #: 197269
Available to Order
$7.85 each
Availability
Location Available Qty
Pos-E-Kon
Flat gasket for use with series B10, DD42, T10 and V3.
MFR: ABB - Installation Products
MFR #: B10XFGP
UPC: 786210802374
Item #: 131074
Available to Order
$6.05 each
Availability
Location Available Qty
Pos-E-Kon
Conduit entry blind plug, Metric Thread PG16.
MFR: ABB - Installation Products
MFR #: CXP723
UPC: 786210769967
Item #: 45251
Available to Order
$9.83 each
Availability
Location Available Qty
Pos-E-Kon
Hand crimp installation tool, For installing Pos-E-Kon D Connector contact pins with Shure Stake feature complete with locator.
MFR: ABB - Installation Products
MFR #: WT80
UPC: 786210704968
Item #: 223498
Available to Order
$3678.33 each
Availability
Location Available Qty
Generac
New home construction or renovations with electrical upgrades are the ideal time to install Generacs GenReady Load Center. Because it's a hybrid electrical distribution panel combined with the transfer switch, you will enjoy substantial savings on installation and a simplified generator system. The Generac EZ Transfer Operator for the Generac GenReady Load Center automatically transfers protected circuits from utility to generator power during a power outage, then returns the circuits back to utility power when utility is restored. The operator installs into the GenReady Load Center.
MFR: Generac
MFR #: 5447
UPC: 696471054477
Item #: 1004550
Available to Order
$273.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN200J3
UPC: 696471112436
Item #: 339718
Available to Order
$1395.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN100K3
UPC: 696471110333
Item #: 328505
Available to Order
$1153.90 each
Availability
Location Available Qty
Generac
The Gen Ready load center is a hybrid panel that operates as a normal load center andalso allows for seamless integration of standby generators. It is available in a NEMA1 configuration for indoor installations, or in a NEMA 3R configuration for outdoorapplications. For installation flexibility, it is multi-listed for use with multiple breakermanufacturers
MFR: Generac
MFR #: 5449
UPC: 696471054491
Item #: 286254
Available to Order
$911.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize Evolution or Nexus Controllers
MFR: Generac
MFR #: RTSN800K3
UPC: 696471612202
Item #: 861589
Available to Order
$6532.90 each
Availability
Location Available Qty
Generac
30 Amp 125/250V single circuit transfer switch NEMA 3R
MFR: Generac
MFR #: 6377
UPC: 696471063776
Item #: 447278
Available to Order
$384.99 each
Availability
Location Available Qty
Generac
12.5kW outdoor svc entr pwr ctr, 50A gen main, 200A util
MFR: Generac
MFR #: 6335
UPC: 696471063356
Item #: 420168
Available to Order
$626.99 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize Evolution or Nexus Controllers. The 100, 200 and 400 amp open transition switches are available in three phase in both service equipment rated and non-service equipment rated configurations.
MFR: Generac
MFR #: RTSN400J3
UPC: 696471114430
Item #: 344925
Available to Order
$2396.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize Evolution or Nexus Controllers. The 100, 200 and 400 amp open transition switches are available in three phase in both service equipment rated and non-service equipment rated configurations.
MFR: Generac
MFR #: RTSN400K3
UPC: 696471611885
Item #: 223111
Available to Order
$2682.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN200K3
UPC: 696471112337
Item #: 308163
Available to Order
$1494.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN100J3
UPC: 696471110432
Item #: 678606
Available to Order
$933.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN100G3
UPC: 696471110234
Item #: 246306
Available to Order
$933.90 each
Availability
Location Available Qty