Switches

Showing 1 - 48 of 83 Items
Filters Clear Filters
expand_less Brand (3)
+ Show 33 More
expand_less Ways to Shop
expand_less Color
expand_less Amperage Rating
expand_less Voltage Rating (AC)
expand_less Number of Poles
expand_less Enclosure
  • Generac
  • Killark
  • Satco
Generac
An integrated solar + storage system with load management for whole home coverage is made easy with the PWRcell ATS. The 100A service entrance rated PWRcell Automatic Transfer Switch (ATS) unlocks whole home backup power. The PWRcell ATS allows the PWRcell system to island the entire home and manage up to four individual HVAC (24 Vac controlled) loads during a utility power outage.
MFR: Generac
MFR #: CXSW100A3
UPC: 696471081718
Item #: 1326264
In Stock -
$757.90 each
Availability
Location Available Qty
Generac
Generacs Smart Management Modules (SMMs) allow PWRcell to make the most of its leading backup power and capacity by helping to manage power usage and to prevent overload. This 100A SMM can be used to manage individual appliances or entire branch circuits. Combine up to eight individual SMMs on a single PWRcell installation to ensure power is sent to the appliances that need it most during an outage.
MFR: Generac
MFR #: 7006
UPC: 696471077520
Item #: 1399934
Available to Order
$321.19 each
Availability
Location Available Qty
Generac
This automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker and a smart A/C module incorporating fuses and two terminal blocks for transfer switch connections.
MFR: Generac
MFR #: RXSW400A3CUL
UPC: 696471075717
Item #: 1349431
Available to Order
$3496.90 each
Availability
Location Available Qty
Generac
This automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker and a smart A/C module incorporating fuses and two terminal blocks for transfer switch connections.
MFR: Generac
MFR #: RXSW100A3CUL
UPC: 696471074819
Item #: 1400711
Available to Order
$768.90 each
Availability
Location Available Qty
Generac
This automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker and a smart A/C module incorporating fuses and two terminal blocks for transfer switch connections.
MFR: Generac
MFR #: RXSW200A3CUL
UPC: 696471074802
Item #: 1350076
Available to Order
$1010.90 each
Availability
Location Available Qty
Generac
EASIER THAN EVER BEFORE - Generacs 9854 HomeLink Upgradeable Manual Transfer Switches are now easier to install, expand and maintain than ever before. To meet the requirements of 2017 National Electric Codes, improved 30-amp and 50-amp HomeLink models can be used with any portable generator featuring compatible GFCI outlets. With interchangeable circuit breakers that simplify the reconfiguration process required for replacing or expanding from 8 to 16 circuits, HomeLink switches can be used to provide power to hard-wired loads such as your homes furnace, well pump or lights. Unlike other manual transfer switches available to the general public, HomeLink models can also be upgraded for automatic functionality with home standby generators up to 11 kW by simply changing out the original controller assembly. Pre-wired for easy installation, these updated switch models also feature an electronic rocker button that seamlessly switches between utility and generator power. Indicator lights identify the presence of utility and/or generator power, and bundled options are currently available with cords and power inlet boxes included. Thanks to the re-launch of Generacs HomeLink Upgradeable Manual Transfer Switches, protecting your desired loads and transitioning from portable power to an automatic standby solution is easier than ever before.
MFR: Generac
MFR #: 9854
UPC: 696471071481
Item #: 1402449
Available to Order
$681.99 each
Availability
Location Available Qty
Satco
Starfish Smart On/Off Wall Switch - White Finish
MFR: Satco
MFR #: S11270
UPC: 045923112706
Item #: 1412564
Available to Order
$15.95 each
Availability
Location Available Qty
Satco
IOT Z-Wave In-Wall Light Switch White
MFR: Satco
MFR #: 86/102
UPC: 045923861024
Item #: 773526
Available to Order
$52.50 each
Availability
Location Available Qty
Satco
Starfish Smart On/Off Wall Switch - White Finish
MFR: Satco
MFR #: S11268
UPC: 045923112683
Item #: 1379674
In Stock -
$27.95 each
Availability
Location Available Qty
Satco
Starfish Smart On/Off Wall Switch - White Finish
MFR: Satco
MFR #: S11267
UPC: 045923112676
Item #: 1418454
Available to Order
$17.95 each
Availability
Location Available Qty
Satco
IOT Z-Wave Plug-In Appliance Module White
MFR: Satco
MFR #: 86/100
UPC: 045923861000
Item #: 773528
Available to Order
$48.00 each
Availability
Location Available Qty
Generac
This accessory allows installers to combine 2 CTs per port on the PWRview Home Energy Monitor (W2HEM). Multiple residential electrical panels can be combined into one PWRview so that you can analyze the consumption data for each. Note that this kit is compatible with PWRview specific CTs (UCT2) and is unnecessary for PWRcell solar + storage systems.
MFR: Generac
MFR #: SYCOM2
UPC: 696471079302
Item #: 1371477
Available to Order
$25.29 each
Availability
Location Available Qty
Generac
These CTs are compatible with the PWRview Home Energy Monitor (W2HEM) and are factory calibrated and encoded to enable the meter to automatically configure to the installed CT's. Note that these CTs are not compatible with PWRcell solar + storage systems. Use PWRcell Accessory Kit (APKE00032) with PWRcell inverters and Automatic Transfer Switches.
MFR: Generac
MFR #: UCT2
UPC: 696471079326
Item #: 1371479
Available to Order
$95.69 each
Availability
Location Available Qty
Generac
Extend the leads on a set of CTs for the PWRview Home Energy Monitor (W2HEM) by 10ft . Includes two 10ft extender harnesses. Note that this kit is compatible with PWRview specific CTs (UCT2) and is unnecessary for PWRcell solar + storage systems.
MFR: Generac
MFR #: SCTE2
UPC: 696471079319
Item #: 1371478
Available to Order
$25.29 each
Availability
Location Available Qty
Generac
The CT accessory kit includes two PWRcell Current Transformers (CTs) and an enternet adapter. This kit can be used to replace lost or damaged CTs or to provide an additional set of CTs for split electrical services.
MFR: Generac
MFR #: APKE00032
UPC: 696471080964
Item #: 1371465
Available to Order
$131.99 each
Availability
Location Available Qty
Generac
PWRcell Battery Cabinet Display Cover
MFR: Generac
MFR #: DISPCVR002
UPC: 696471085709
Item #: 1371475
Available to Order
$1451.99 each
Availability
Location Available Qty
Generac
The PWRcell Upgrade Kit replaces lost or misplaced hardware. It consists of grounding tabs, retention clips, and screws for adding additional battery modules to a PWRcell Battery cabinet (APKE00007 or APKE00028) in the event that the original hardware has been lot or misplaced.
MFR: Generac
MFR #: APKE00009
UPC: 696471080605
Item #: 1371464
Available to Order
$170.49 each
Availability
Location Available Qty
Generac
PWRcell Inverter Display Cover
MFR: Generac
MFR #: DISPCVR001
UPC: 696471084993
Item #: 1371474
Available to Order
$835.99 each
Availability
Location Available Qty
Generac
PWRcell ATS Controller Kit
MFR: Generac
MFR #: 8006
UPC: 696471085624
Item #: 1371457
Available to Order
$170.49 each
Availability
Location Available Qty
Satco
On-Off Canopy Switch - Single Circuit With Metal Chain - White Cord And Bell - 6A-125V, 3A-250V Rating - Brass Finish
MFR: Satco
MFR #: 90/704
UPC: 045923907043
Item #: 103305
Available to Order
$3.81 each
Availability
Location Available Qty
Generac
New home construction or renovations with electrical upgrades are the ideal time to install Generacs GenReady Load Center. Because it's a hybrid electrical distribution panel combined with the transfer switch, you will enjoy substantial savings on installation and a simplified generator system. The Generac EZ Transfer Operator for the Generac GenReady Load Center automatically transfers protected circuits from utility to generator power during a power outage, then returns the circuits back to utility power when utility is restored. The operator installs into the GenReady Load Center.
MFR: Generac
MFR #: 5447
UPC: 696471054477
Item #: 1004550
Available to Order
$273.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN200J3
UPC: 696471112436
Item #: 339718
Available to Order
$1395.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN100K3
UPC: 696471110333
Item #: 328505
Available to Order
$1153.90 each
Availability
Location Available Qty
Generac
The Gen Ready load center is a hybrid panel that operates as a normal load center andalso allows for seamless integration of standby generators. It is available in a NEMA1 configuration for indoor installations, or in a NEMA 3R configuration for outdoorapplications. For installation flexibility, it is multi-listed for use with multiple breakermanufacturers
MFR: Generac
MFR #: 5449
UPC: 696471054491
Item #: 286254
Available to Order
$911.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize Evolution or Nexus Controllers
MFR: Generac
MFR #: RTSN800K3
UPC: 696471612202
Item #: 861589
Available to Order
$6532.90 each
Availability
Location Available Qty
Generac
30 Amp 125/250V single circuit transfer switch NEMA 3R
MFR: Generac
MFR #: 6377
UPC: 696471063776
Item #: 447278
Available to Order
$384.99 each
Availability
Location Available Qty
Generac
12.5kW outdoor svc entr pwr ctr, 50A gen main, 200A util
MFR: Generac
MFR #: 6335
UPC: 696471063356
Item #: 420168
Available to Order
$626.99 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize Evolution or Nexus Controllers. The 100, 200 and 400 amp open transition switches are available in three phase in both service equipment rated and non-service equipment rated configurations.
MFR: Generac
MFR #: RTSN400J3
UPC: 696471114430
Item #: 344925
Available to Order
$2396.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize Evolution or Nexus Controllers. The 100, 200 and 400 amp open transition switches are available in three phase in both service equipment rated and non-service equipment rated configurations.
MFR: Generac
MFR #: RTSN400K3
UPC: 696471611885
Item #: 223111
Available to Order
$2682.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN200K3
UPC: 696471112337
Item #: 308163
Available to Order
$1494.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN100J3
UPC: 696471110432
Item #: 678606
Available to Order
$933.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize an Evolution or Nexus Controller. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
MFR: Generac
MFR #: RTSN100G3
UPC: 696471110234
Item #: 246306
Available to Order
$933.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize Evolution or Nexus Controllers
MFR: Generac
MFR #: RTSN800G3
UPC: 696471612059
Item #: 625267
Available to Order
$6433.90 each
Availability
Location Available Qty
Generac
Generac Automatic Transfer Switches are designed for use with three phase generators that utilize Evolution or Nexus Controllers
MFR: Generac
MFR #: RTSN600G3
UPC: 696471612165
Item #: 440749
Available to Order
$6125.90 each
Availability
Location Available Qty
Killark
FXS Series - Aluminum 1-Pole Tumbler Switch Cover With Device - Factory Sealed - 20A
MFR: Killark, a Hubbell affiliate
MFR #: FXS-1C
UPC: 783936194738
Item #: 132634
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Killark
XS Series - Aluminum Feed-Thru 2-Pole Tumbler Switch Unit - Hub Size 3/4 Inch - 20A
MFR: Killark, a Hubbell affiliate
MFR #: XS-52C
UPC: 783936930565
Item #: 777606
Available to Order
$340.70 each
Availability
Location Available Qty
Killark
XS Series - Aluminum 1-Pole Tumbler Switch Cover With Device - 20A
MFR: Killark, a Hubbell affiliate
MFR #: XS-1C
UPC: 783936925004
Item #: 96970
In Stock -
$230.68 each
Availability
Location Available Qty
KILLARK
FXS Series - Aluminum Feed-Thru 3-Way/SPDT (No Off) Tumbler Switch Unit- Factory Sealed - Hub Size 3/4 Inch - 20A
MFR: Killark, a Hubbell affiliate
MFR #: FXS-53C
UPC: 783936195643
Item #: 370622
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Killark
FXS Series - Factory Sealed Feed-Thru Box And Cover With 1-Pole Tumbler Switch - Conduit Hub Size 3/4 In - 20 Amps
MFR: Killark, a Hubbell affiliate
MFR #: FXS-51C
UPC: 783936195582
Item #: 290568
Available to Order
$968.76 each
Availability
Location Available Qty
Killark
XS Series - Aluminum Feed-Thru 3-Pole Tumbler Switch Unit - Hub Size 3/4 Inch - 15A
MFR: Killark, a Hubbell affiliate
MFR #: XS-58C
UPC: 783936930626
Item #: 449352
Available to Order
$616.61 each
Availability
Location Available Qty
Killark
XS Series - Aluminum 4-Way Tumbler Switch Cover With Device - 20A
MFR: Killark, a Hubbell affiliate
MFR #: XS-4C
UPC: 783936925134
Item #: 765486
Available to Order
$432.90 each
Availability
Location Available Qty
Killark
XS Series - Aluminum DPDT (No Center Off) Tumbler Switch Cover With Device - 20A
MFR: Killark, a Hubbell affiliate
MFR #: XS-6C
UPC: 783936925264
Item #: 1222232
Available to Order
$336.68 each
Availability
Location Available Qty
Killark
FXS Series - Aluminum Feed-Thru 3-Pole Tumbler Switch Unit - Factory Sealed - Hub Size 1/2 Inch - 15A
MFR: Killark, a Hubbell affiliate
MFR #: FXS-48C
UPC: 783936195575
Item #: 989721
Available to Order
$1467.60 each
Availability
Location Available Qty
Killark
XS Series - Aluminum Dead-End 1-Pole Tumbler Switch Unit - Hub Size 1/2Inch - 20A
MFR: Killark, a Hubbell affiliate
MFR #: XS-11C
UPC: 783936930145
Item #: 313971
Available to Order
$321.32 each
Availability
Location Available Qty
Killark
XS Series - Aluminum Feed-Thru 3-Way/SPDT (No Center Off) Tumbler Switch Unit - Hub Size 1/2 Inch - 20A
MFR: Killark, a Hubbell affiliate
MFR #: XS-43C
UPC: 783936930480
Item #: 1232777
Available to Order
$343.93 each
Availability
Location Available Qty
KILLARK
FXS Series - Aluminum Feed-Thru 3-Pole Tumbler Switch Unit - Factory Sealed - Hub Size 3/4 Inch - 15A
MFR: Killark, a Hubbell affiliate
MFR #: FXS-58C
UPC: 783936195742
Item #: 663922
Available to Order
$1467.60 each
Availability
Location Available Qty
Killark
FXS Series - Aluminum Dead-End 3-Way/SPDT (No Off) Tumbler Switch Unit-Factory Sealed - Hub Size 3/4 Inch - 20A
MFR: Killark, a Hubbell affiliate
MFR #: FXS-23C
UPC: 783936195131
Item #: 290314
Available to Order
$996.98 each
Availability
Location Available Qty
Killark
FXS Series - Aluminum 4-Way Tumbler Switch Cover With Device - Factory Sealed - 20A
MFR: Killark, a Hubbell affiliate
MFR #: FXS-4C
UPC: 783936194806
Item #: 1151594
Available to Order
$1107.50 each
Availability
Location Available Qty