Testing and Measuring Instruments

Showing 1201 - 1248 of 1276 Items

Sort By:

Per Page

expand_less Brand

expand_less Ways to Shop

Discontinued

Fluke

MFR: Fluke

MFR #: 9142-INSZ

UPC: 095969419796

Item #: 640585

Available to Order

$752.72 each

Availability

Location	Available Qty

Discontinued

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert B features two wells each of 3/8, 1/4, and 3/16 inches in diameter for doing comparison calibrations.

Fluke

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert B features two wells each of 3/8, 1/4, and 3/16 inches in diameter for doing comparison calibrations.

MFR: Fluke

MFR #: 9103-B-156

UPC: 095969128605

Item #: 1121171

Available to Order

$9169.79 each

Availability

Location	Available Qty

Discontinued

Fluke Calibration Industrial Dual-Block Thermometer Dry-Well Calibrator with Two 1/4 and Two 3/16 Inserts, Black Case, 110V, 50/60Hz.

Fluke

Fluke Calibration Industrial Dual-Block Thermometer Dry-Well Calibrator with Two 1/4 and Two 3/16 Inserts, Black Case, 110V, 50/60Hz.

MFR: Fluke

MFR #: 9009-B-156

UPC: 095969128421

Item #: 871581

Available to Order

$14823.53 each

Availability

Location	Available Qty

Discontinued

Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is designed for use with the 9103 Field Dry-Well. Insert D 9103.

Fluke

Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is designed for use with the 9103 Field Dry-Well. Insert D 9103.

MFR: Fluke

MFR #: 3103-6

UPC: 095969205573

Item #: 912644

Available to Order

$693.31 each

Availability

Location	Available Qty

Discontinued

MICRO-BATH, -5 TO 125C, 110V 50/60HZ

Fluke

Need portability and extreme stability. Hart Micro-Baths have both. We invented the Micro-Bath. While many have tried to replicate it they can't use the proprietary Hart Scientific controllers, so none of them deliver performance like a Hart bath. Micro-Baths can be used anywhere for any type of sensor. It is smaller and lighter than most dry-wells, has a spill-proof lid, and easy to carry. Micro-Baths can even be transported with the fluid in them. Range: -5 degrees Celsius to 125 degrees Celsius (23 degrees Fahrenheit to 257 degrees Fahrenheit)

MFR: Fluke

MFR #: 7102-156

UPC: 095969128254

Item #: 647228

Available to Order

$14501.04 each

Availability

Location	Available Qty

Discontinued

This dry-well is only four inches high and six inches wide, reaches temperatures as low as 10degrees Celsius, includes a NIST-traceable calibration, and is stable to plus or minus0.05degrees Celsius. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient. It has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. It also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable. Block B has four holes that accept probe diameters of 3/8, 1/4, 3/16 and 1/8.

Fluke

This dry-well is only four inches high and six inches wide, reaches temperatures as low as 10degrees Celsius, includes a NIST-traceable calibration, and is stable to plus or minus0.05degrees Celsius. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient. It has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. It also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable. Block B has four holes that accept probe diameters of 3/8, 1/4, 3/16 and 1/8.

MFR: Fluke

MFR #: 9100S-B-156

UPC: 095969205603

Item #: 500672

Available to Order

$5397.88 each

Availability

Location	Available Qty

Discontinued

Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm

Fluke

Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm

MFR: Fluke

MFR #: 9142-INSE

UPC: 095969419765

Item #: 903896

Available to Order

$884.78 each

Availability

Location	Available Qty

Discontinued

For IR calibrations above normal ambient, the 9132 provides a steady blackbody target up to 500degrees Celsius (932degrees Fahrenheit). With precision to plus or minus0.5degrees Celsius and stability to plus or minus0.1degrees Celsius, this new portable IR unit can certify most handheld pyrometers. Short heating and cooling times mean you won't have to wait extended periods of time to get your work done. From room temperature to 500degrees Celsius the 9132 will be stable within 30 minutes. You won't find a more compact IR calibrator. Range: 50 to 500degrees Celsius (122 to 932degrees Fahrenheit)

Fluke

For IR calibrations above normal ambient, the 9132 provides a steady blackbody target up to 500degrees Celsius (932degrees Fahrenheit). With precision to plus or minus0.5degrees Celsius and stability to plus or minus0.1degrees Celsius, this new portable IR unit can certify most handheld pyrometers. Short heating and cooling times mean you won't have to wait extended periods of time to get your work done. From room temperature to 500degrees Celsius the 9132 will be stable within 30 minutes. You won't find a more compact IR calibrator. Range: 50 to 500degrees Celsius (122 to 932degrees Fahrenheit)

MFR: Fluke

MFR #: 9132-156

UPC: 095969128865

Item #: 947797

Available to Order

$11147.36 each

Availability

Location	Available Qty

Discontinued

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.

Fluke

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.

MFR: Fluke

MFR #: 9140-A-156

UPC: 095969128926

Item #: 912847

Available to Order

$7530.62 each

Availability

Location	Available Qty

Discontinued

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert B (comparison block): 2 3/8,2 1/4, and 2 3/16 holes.

Fluke

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert B (comparison block): 2 3/8,2 1/4, and 2 3/16 holes.

MFR: Fluke

MFR #: 9140-B-156

UPC: 095969128940

Item #: 756371

Available to Order

$7530.62 each

Availability

Location	Available Qty

Discontinued

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert A handles a full range of probe sizes with a single well of each size.

Fluke

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert A handles a full range of probe sizes with a single well of each size.

MFR: Fluke

MFR #: 9103-A-156

UPC: 095969128582

Item #: 822939

Available to Order

$9169.79 each

Availability

Location	Available Qty

Discontinued

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert A (variety block) 1/2, 3/8, 1/4, 3/16, 1/8, and 1/16 holes.

Fluke

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert A (variety block) 1/2, 3/8, 1/4, 3/16, 1/8, and 1/16 holes.

MFR: Fluke

MFR #: 9150-A-156

UPC: 095969129046

Item #: 948022

Available to Order

$21121.06 each

Availability

Location	Available Qty

Discontinued

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert B (comparison block) 2Ea 3/8, 2Ea 1/4, and 2Ea 3/16 holes.

Fluke

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert B (comparison block) 2Ea 3/8, 2Ea 1/4, and 2Ea 3/16 holes.

MFR: Fluke

MFR #: 9150-B-156

UPC: 095969129060

Item #: 948025

Available to Order

$21121.06 each

Availability

Location	Available Qty

Discontinued

If you're calibrating IR guns at cold temperatures, this is for you. With solid-state cooling technology, this new IR calibrator reaches -30degrees Celsius (22degrees Fahrenheit) in standard ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice buildup on the target can be avoided. At the upper end of its range, the 9133 provides steady temperatures to 160degrees Celsius (320degrees Fahrenheit). With heating and cooling times of about 15 minutes from ambient to either extreme, this gets you to the temperature quickly and performs when it gets there. Compare your IR devices to the temperature display-its factory calibrated to be within plus or minus0.4degrees Celsius (plus or minus0.7degrees Fahrenheit). No other IR calibrators give you this level of precision in such compact packages. Whatever your temperature application, trust a Hart product to solve it. Range: -30 to 150degrees Celsius @ 23degrees Celsius ambient (-22 to 302degrees Fahrenheit @ 73degrees Fahrenheit ambient)

Fluke

If you're calibrating IR guns at cold temperatures, this is for you. With solid-state cooling technology, this new IR calibrator reaches -30degrees Celsius (22degrees Fahrenheit) in standard ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice buildup on the target can be avoided. At the upper end of its range, the 9133 provides steady temperatures to 160degrees Celsius (320degrees Fahrenheit). With heating and cooling times of about 15 minutes from ambient to either extreme, this gets you to the temperature quickly and performs when it gets there. Compare your IR devices to the temperature display-its factory calibrated to be within plus or minus0.4degrees Celsius (plus or minus0.7degrees Fahrenheit). No other IR calibrators give you this level of precision in such compact packages. Whatever your temperature application, trust a Hart product to solve it. Range: -30 to 150degrees Celsius @ 23degrees Celsius ambient (-22 to 302degrees Fahrenheit @ 73degrees Fahrenheit ambient)

MFR: Fluke

MFR #: 9133-156

UPC: 095969128889

Item #: 691837

Available to Order

$15756.20 each

Availability

Location	Available Qty

Discontinued

Comes in a yellow airtight and watertight case

Fluke

Comes in a yellow airtight and watertight case

MFR: Fluke

MFR #: 9009-Y-156

UPC: 095969128445

Item #: 646219

Available to Order

Availability

Location	Available Qty

Discontinued

SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing

Fluke

SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing

MFR: Fluke

MFR #: TL225

UPC: 095969288781

Item #: 232057

Available to Order

Availability

Location	Available Qty

Discontinued

CABLEIQ QUALIFICATION TESTER

Fluke Networks

CABLEIQ QUALIFICATION TESTER

MFR: Fluke

MFR #: CIQ-100

UPC: 754082022602

Item #: 11791

Available to Order

Availability

Location	Available Qty

Discontinued

BREAKER FINDER

Amprobe

Circuit Breaker Tracer, Voltage Rating: 9 - 120 V, Battery: 9 V Alkaline For Receiver, Frequency Rating: 50 - 60 HZ, UL Listed, CAT II 120 V, For Indoor use, Altitudes up to 2000 m, 2 DEG Pollution

MFR: Fluke

MFR #: BT-120

UPC: 095969498869

Item #: 535461

Available to Order

$94.57 each

Availability

Location	Available Qty

Discontinued

COPPER/FIBER TECHNICIANS KIT (CIQ-KIT + FTK1000)

Fluke Networks

COPPER/FIBER TECHNICIANS KIT (CIQ-KIT + FTK1000)

MFR: Fluke

MFR #: CIQ-FTKSFP

UPC: 754082068693

Item #: 322517

Available to Order

Availability

Location	Available Qty

Discontinued

CABLEIQ ADVANCED IT KIT

Fluke Networks

CABLEIQ ADVANCED IT KIT

MFR: Fluke

MFR #: CIQ-KIT

UPC: 754082031963

Item #: 263093

Available to Order

Availability

Location	Available Qty

Discontinued

This Amprobe Dual Temperature Portable Thermometer is a completely portable dual input thermometer. With a digital dual display that displays T1, T2 and T1-T2. Choose between Celsius or Fahrenheit degree measurement results. This thermometer will store and later display your minimum and maximum values. This meter measures temperature with either K-type or J-type thermocouples.

Amprobe

This Amprobe Dual Temperature Portable Thermometer is a completely portable dual input thermometer. With a digital dual display that displays T1, T2 and T1-T2. Choose between Celsius or Fahrenheit degree measurement results. This thermometer will store and later display your minimum and maximum values. This meter measures temperature with either K-type or J-type thermocouples.

MFR: Fluke

MFR #: TMD-10

UPC: 095969419338

Item #: 811310

Available to Order

$360.89 each

Availability

Location	Available Qty

Discontinued

EX Stik Thermometer, Fixed RTD, -80 to 300degrees Celsius Temperature Range, 0.25 Stem Diameter, 12 Stem Length

Fluke

EX Stik Thermometer, Fixed RTD, -80 to 300degrees Celsius Temperature Range, 0.25 Stem Diameter, 12 Stem Length

MFR: Fluke

MFR #: 1552A-12-DL

UPC: 095969583985

Item #: 707432

Available to Order

$2096.42 each

Availability

Location	Available Qty

Discontinued

VT04 Series Visual IR Thermometer, Temperature Range: -10 To 250 DEG C, Accuracy: 2 PCT Temperature Measurement, Spectral Response: 6.5 - 14 UM, Data Logging: Yes, Safety Rating: CFR47: 2009 Class A. Part 15 subpart B, CE: EN 61326:2006, IEC/EN 61010-1:2010, Battery Type: (4) AA 8 HR, Dimensions: 8.3 IN Height X 3 IN Length X 2.2 IN Width

Fluke

VT04 Series Visual IR Thermometer, Temperature Range: -10 To 250 DEG C, Accuracy: 2 PCT Temperature Measurement, Spectral Response: 6.5 - 14 UM, Data Logging: Yes, Safety Rating: CFR47: 2009 Class A. Part 15 subpart B, CE: EN 61326:2006, IEC/EN 61010-1:2010, Battery Type: (4) AA 8 HR, Dimensions: 8.3 IN Height X 3 IN Length X 2.2 IN Width

MFR: Fluke

MFR #: FLK-VT04

UPC: 095969678278

Item #: 1004630

Available to Order

Availability

Location	Available Qty

Discontinued

This Amprobe thermometer, a 10:1 spot to distance ratio infrared thermometer, offers best in class accuracy and response time with a temperature measurement range of 0F to 716F or -18C to 380C. This is specifically designed for HVAC, electrical, industrial maintenance, automotive as well as quality control and fire prevention applications.

Amprobe

This Amprobe thermometer, a 10:1 spot to distance ratio infrared thermometer, offers best in class accuracy and response time with a temperature measurement range of 0F to 716F or -18C to 380C. This is specifically designed for HVAC, electrical, industrial maintenance, automotive as well as quality control and fire prevention applications.

MFR: Fluke

MFR #: IR-710

UPC: 095969614313

Item #: 8708

Available to Order

Availability

Location	Available Qty

Discontinued

50 TO 1 IR THERMOMETER

Amprobe

This Amprobe thermometer, a precision performance 50:1 spot to distance ratio infrared thermometer, offers unparalleled accuracy and response time with a temperature measurement range of -58F to 2822F or -50C to 1550C. This is perfect for demanding quality and process control applications with extremely high accuracy and distance to spot. This thermometer also features 99 data points recognition, thermocouple inputs, and USB download for advanced HVAC, electrical, industrial maintenance, automotive as well as quality control and fire prevention applications.

MFR: Fluke

MFR #: IR-750

UPC: 095969614351

Item #: 201172

Available to Order

Availability

Location	Available Qty

Discontinued

Detect issues instantly. Eliminate the need for multiple temperature measurements. Fluke Visual IR Thermometers combine the convenience of a spot thermometer with the visual advantage of an infrared heat map. Designed to see it all. Every Fluke Visual IR Thermometer has a built-in digital camera with an infrared heat map overlay to instantly identify the exact location of the problem.

Fluke

Detect issues instantly. Eliminate the need for multiple temperature measurements. Fluke Visual IR Thermometers combine the convenience of a spot thermometer with the visual advantage of an infrared heat map. Designed to see it all. Every Fluke Visual IR Thermometer has a built-in digital camera with an infrared heat map overlay to instantly identify the exact location of the problem.

MFR: Fluke

MFR #: FLK-VT04A

UPC: 095969725620

Item #: 390563

Available to Order

Availability

Location	Available Qty

Discontinued

WATER DEADWEIGHT TESTER, DUAL RANGE, 700 KGF/CM2

Fluke

WATER DEADWEIGHT TESTER, DUAL RANGE, 700 KGF/CM2

MFR: Fluke

MFR #: P3224-KGCM2

UPC: 095969638586

Item #: 629317

Available to Order

$42497.98 each

Availability

Location	Available Qty

Discontinued

WATER DEADWEIGHT TESTER, 10K PSI

Fluke

WATER DEADWEIGHT TESTER, 10K PSI

MFR: Fluke

MFR #: P3214-PSI

UPC: 095969638517

Item #: 593913

Available to Order

$27451.60 each

Availability

Location	Available Qty

Discontinued

REFERENCE PRESSURE GAUGE G20M

Fluke

REFERENCE PRESSURE GAUGE G20M

MFR: Fluke

MFR #: 2700G-G20M

UPC: 095969623544

Item #: 1069661

Available to Order

$3210.67 each

Availability

Location	Available Qty

Discontinued

REFERENCE PRESSURE GAUGE BG2M

Fluke

REFERENCE PRESSURE GAUGE BG2M

MFR: Fluke

MFR #: 2700G-BG2M

UPC: 095969623513

Item #: 650958

Available to Order

$3210.67 each

Availability

Location	Available Qty

Discontinued

REF PRES GAUGE BG100K

Fluke

REFERENCE PRESSURE GAUGE BG100K

MFR: Fluke

MFR #: 2700G-BG100K

UPC: 095969623483

Item #: 650959

Available to Order

$3210.67 each

Availability

Location	Available Qty

Discontinued

The Fluke 419D is a professional-grade laser distance meter its fast, easy to use, and fits on your tool belt. This meter will save you effort and money by reducing measurement time and errors.

Fluke

The Fluke 419D is a professional-grade laser distance meter its fast, easy to use, and fits on your tool belt. This meter will save you effort and money by reducing measurement time and errors.

MFR: Fluke

MFR #: FLUKE-419D

UPC: 095969613569

Item #: 123960

Available to Order

Availability

Location	Available Qty

Discontinued

400A SWIVEL CLAMP

Amprobe

Amprobe's new swivel clamp meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC DC currents, voltage, resistance and capacitance as well as cat III 600 V safety ratings make this clamp on meter something you should swivel to see.

MFR: Fluke

MFR #: ACD-20SW

UPC: 095969498821

Item #: 4556

Available to Order

Availability

Location	Available Qty

Discontinued

This CAT IV rated ACD-3300IND Clamp On Tester is ideal for industrial applications and utilities that require an extra level of safety. Including true-rms sensing for accuracy, this clamp on meter's extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple.

Amprobe

This CAT IV rated ACD-3300IND Clamp On Tester is ideal for industrial applications and utilities that require an extra level of safety. Including true-rms sensing for accuracy, this clamp on meter's extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple.

MFR: Fluke

MFR #: ACD-3300-IND

UPC: 095969492676

Item #: 411690

Available to Order

$733.45 each

Availability

Location	Available Qty

Discontinued

1000A CLAMP POWER QUALITY METER W/THD-F

Amprobe

The Amprobe ACD-40 provides a simple and effective way to verify if the electrical system is affected by harmonics. Add on troubleshooting capabilities with the ACD-40PQ data-logging feature or get complete power analysis with the ACD-41PQ. Increase measuring efficiency with an optional PC interface kit.

MFR: Fluke

MFR #: ACD-41PQ

UPC: 095969365864

Item #: 230920

Available to Order

Availability

Location	Available Qty

Discontinued

WIRING INSPECTOR

Amprobe

This Amprobe wiring inspector is a rugged circuit tester designed to test whether a buildings wiring is in compliance with electrical code in seconds, especially voltage drop under load. Without scrolling or switching screens, you can quickly identify issues with splices, connections and conductor quality, crucial to safety and performance of the electrical system. The flashing screen on this circuit tester will clearly indicate incorrect wiring or failures and it wont trip circuit breakers or blow fuses during the test.

MFR: Fluke

MFR #: INSP-3

UPC: 095969516181

Item #: 153410

Available to Order

Availability

Location	Available Qty

Discontinued

No Image Available

Amprobe

Keep productivity high and operational costs low, with the Amprobe Underground Cable Locator. It is the rugged, economical solution for locating cable, wires and pipes that are underground if they are energized or de-energized. Great for parking lot and airport lighting applications, it precisely pinpoints buried services, with exceptionally fast sound and meter response. The backlit, multiple-segment, bar graph, digital display, plus audible indicators easily locate cables and wires. This Underground Cable Locator employs the proven 33 kHz frequency for most locating applications. To avoid lines at utility construction sites, it also offers the highly sensitive power and radio modes. Take depth measurements with the simple press of a button.

MFR: Fluke

MFR #: AT-3500

UPC: 095969492836

Item #: 11687

Available to Order

Availability

Location	Available Qty

Discontinued

Signal Clamp, Dimensions: 4 IN Diameter, For AT-3500 Underground Cable Locator

Amprobe

Signal Clamp, Dimensions: 4 IN Diameter, For AT-3500 Underground Cable Locator

MFR: Fluke

MFR #: SC-3500

UPC: 095969492843

Item #: 4653

Available to Order

Availability

Location	Available Qty

Discontinued

TESTER, RECEPTACLE GFCI 40020S-A (EN)

Southwire

TESTER, RECEPTACLE GFCI 40020S-A (EN)

MFR: Southwire

MFR #: 582926

UPC: 032886910036

Item #: 81933

Available to Order

Availability

Location	Available Qty

Discontinued

RadioRA 2 Wall-mount, wireless temperature sensor, 434 MHz in snow

Lutron

RadioRA 2 Wall-mount, wireless temperature sensor, 434 MHz in snow

MFR: Lutron Electronics

MFR #: LRF2-TWRB-SW

UPC: 027557800105

Item #: 258647

Available to Order

Availability

Location	Available Qty

Discontinued

Tone Test Set and Inductive Speaker Probe each with belt holster

Leviton

Tone Test Set and Inductive Speaker Probe each with belt holster

MFR: Leviton

MFR #: 49562-TSK

UPC: 078477791882

Item #: 636083

Available to Order

Availability

Location	Available Qty

Discontinued

Individual Mini Meter Submeter in Small NEMA 4X Enclosures, Mechanical Counters, 120V, 1PH, 2W, 200:0.1A, 1/10 kWh Resolution, Electric Meter: Yes, Title 24 compliant, ASHRAE 90.1 compliant

Leviton

Single Element, 1PH, 2W, 120V, Small Outdoor Enclosure, 01 Installed Meter, Mechanical 1/10 KWH Counter, 200:0.1, Black

MFR: Leviton

MFR #: 6S101-D02

UPC: 078477547762

Item #: 485734

Available to Order

Availability

Location	Available Qty

Discontinued

Mini Meter Submeter, Single Element, No Enclosure, 120V, 1PH, 2W, 1.0 kWh Counter Output, 100:0.1, Electric Meter: Yes, Title 24 compliant, ASHRAE 90.1 compliant

Leviton

Single Element, 1PH, 2W, 120V, Individual, 1.0 kWh and 0.1 kWh Isolated Outputs and 1.0 kWh Counter Output Only, 100:0.1, Black

MFR: Leviton

MFR #: 7B101-H01

UPC: 078477552803

Item #: 744678

Available to Order

Availability

Location	Available Qty

Discontinued

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

Fluke

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

MFR: Fluke

MFR #: VPS220-R

UPC: 095969435833

Item #: 224255

Available to Order

Availability

Location	Available Qty

Discontinued

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

Fluke

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

MFR: Fluke

MFR #: VPS220-G

UPC: 095969435840

Item #: 224110

Available to Order

Availability

Location	Available Qty

Discontinued

No Image Available

Schneider Electric

Upgrade license, EcoStruxure Control Expert, extra large (XL), group to team, paper license

MFR: Schneider Electric

MFR #: CEXUPNCZXTPMZZ

Item #: 1203704

Available to Order

Availability

Location	Available Qty

Discontinued

Series 1000, Dual Element Meter, 1P/3W, 120/208/240V, 100:0.1A, Max 100A, METER ONLY.

Leviton

Series 1000, Dual Element Meter, 120/208/240V, 2PH, 3W, Indoor Surface Mount Enclosure, Gray

MFR: Leviton

MFR #: 1N240-11

UPC: 078477548264

Item #: 124492

Available to Order

Availability

Location	Available Qty

Discontinued

Series 1000, Dual Element Meter, 1P/3W, 120/208/240V, 200:0.1A, Max 200A, METER ONLY.

Leviton

Sub-Meter Series 1000 Dual Element Indoor Surface Mount Enclosure

MFR: Leviton

MFR #: 1N240-21

UPC: 078477548271

Item #: 108874

Available to Order

Availability

Location	Available Qty