Calibrators

Showing 1 - 48 of 48 Items
Fluke
The fast one-handed tool for mA loop checks in Ex zones. The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2
MFR: Fluke
MFR #: FLUKE-707EX
UPC: 095969207287
Item #: 253503
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Fluke
HDRC Handheld Dry-Well A
MFR: Fluke
MFR #: 9100S-A-156
UPC: 095969017831
Item #: 1572834
Available to Order
$4816.53 each
Availability
Location Available Qty
Fluke
The Fluke 715 Volt/mA Calibrator delivers outstanding performance, durability and reliability. Offered in the rugged Fluke 80 Series DMM package, the calibrator is compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 715 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.
MFR: Fluke
MFR #: FLUKE-715
UPC: 095969050692
Item #: 279050
Available to Order
$2768.21 each
Availability
Location Available Qty
Fluke
The fastest, one-handed tool for loop checks. The Fluke 707 Loop Calibrator is a high performance solution for calibration, repair and maintenance of current loops. The new "Quick Click" knob makes it extremely fast and easy to use.
MFR: Fluke
MFR #: FLUKE-707
UPC: 095969107150
Item #: 447806
Available to Order
$1862.85 each
Availability
Location Available Qty
Fluke
Changeable inserts are sized for probes with the named diameter. Use extra inserts to extend the range of hole sizes available or to back up or change existing inserts. This insert is intended for use with the 9009 Industrial Dual-Block Dry-Well. Hole size: 3/16 in (4.8 mm) (9102, 9009)
MFR: Fluke
MFR #: 3102-3
UPC: 095969122283
Item #: 1327018
Available to Order
$406.96 each
Availability
Location Available Qty
Fluke
The Fluke 705Loop Calibrator is a cost-effective, integrated solution for calibration, repair and maintenance of current loops.
MFR: Fluke
MFR #: FLUKE-705
UPC: 095969062565
Item #: 514976
Available to Order
$1760.48 each
Availability
Location Available Qty
Fluke
Fluke-71X-TRAP
MFR: Fluke
MFR #: FLUKE-71X-TRAP
UPC: 095969682336
Item #: 445613
Available to Order
$1047.55 each
Availability
Location Available Qty
Fluke
Built for the masters of temperature. The Fluke 724: everything you need to troubleshoot and calibrate temperature. Now you can carry one tool to expertly test all the temperature sensors and transmitters in your plant. The Fluke 724 is the masters answe
MFR: Fluke
MFR #: FLUKE-724
UPC: 095969083355
Item #: 193505
Available to Order
$5011.73 each
Availability
Location Available Qty
Fluke
FLUKE-754 Documenting Process Calibrator for HART
MFR: Fluke
MFR #: FLUKE-754
UPC: 095969491754
Item #: 235700
Available to Order
$16454.53 each
Availability
Location Available Qty
Fluke
FLUKE-726 Precision Multifunction Calibrator
MFR: Fluke
MFR #: FLUKE-726
UPC: 095969293273
Item #: 222661
Available to Order
$8026.94 each
Availability
Location Available Qty
Fluke
25 degrees Celsius to 150 degrees Celsius, with 9142-INSA. Lightweight, portable, and fast. Cool to 25 degrees Celsius in 15 minutes and heat to 660degrees Celsius in 15 minutes. Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current. True reference thermometry with accuracy to plus or minus0.01 degrees Celsius. On-board automation and documentation. Metrology performance in accuracy, stability, uniformity, and loading.
MFR: Fluke
MFR #: 9142-A-156
UPC: 095969419420
Item #: 903895
Available to Order
$13206.86 each
Availability
Location Available Qty
Fluke
Insert, Size: 1/8 IN, For 9102 Handheld Dry-Wells
MFR: Fluke
MFR #: 3102-2
UPC: 095969122276
Item #: 905259
Available to Order
$436.59 each
Availability
Location Available Qty
Fluke
Changeable inserts are sized for probes with the named diameter. Use extra inserts to extend the range of hole sizes available or to back up or change existing inserts. This insert is intended for use with the 9009 Industrial Dual-Block Dry-Well. Hole size: 1/16 in (1.6 mm) (9102, 9009)
MFR: Fluke
MFR #: 3102-1
UPC: 095969122269
Item #: 905258
Available to Order
$406.96 each
Availability
Location Available Qty
Fluke
Blank Insert, Size: Blank, For 9102 Handheld Dry-Wells
MFR: Fluke
MFR #: 3102-0
UPC: 095969122252
Item #: 905257
Available to Order
$406.96 each
Availability
Location Available Qty
Fluke
Changeable inserts are sized for probes with the named diameter. Use extra inserts to extend the range of hole sizes available or to back up or change existing inserts. This insert is intended for use with the 9009 Industrial Dual-Block Dry-Well. Hole size: 5/32 in (4 mm) (9102, 9009)
MFR: Fluke
MFR #: 3102-8
UPC: 095969122337
Item #: 905263
Available to Order
$458.42 each
Availability
Location Available Qty
Fluke
Fluke Calibration HDRC Handheld Dry-Well Low-Temperature Calibrator, -10 to 122degrees Celsius Temperature Range, 94-234V
MFR: Fluke
MFR #: 9102S-156
UPC: 095969017916
Item #: 935068
Available to Order
$7913.20 each
Availability
Location Available Qty
Fluke
IR Temp Calibrator, Temperature Range: 35 - 500 DEG C, Voltage Rating: 115 V, Heating Time: 15 MINT:20 MINT: 35 - 500 DEG C, Cooling Time: 15 MINT: 100 MINT: 500 - 35 DEG C 40 MINT: 500 - 100 DEG C MINT, Accuracy: Plus/Minus 0.35 DEG C, Stability: Plus/Minus 0.05 DEG C At 35 DEG C Plus/Minus 0.20 DEG C At 200 DEG C Plus/Minus 0.40 DEG C At 500 DEG C, Interface: RS-232, Dimensions: 356 MM Height X 241 MM Width X 216 MM Diameter, Target Diameter: 6 IN, EN 61010-1:2001, CAN/CSA C22.2 No.61010.1-04
MFR: Fluke
MFR #: 4181-156
UPC: 095969441124
Item #: 1002082
Available to Order
$15360.19 each
Availability
Location Available Qty
Fluke
HDRC Handheld Dry-Well C
MFR: Fluke
MFR #: 9100S-C-156
UPC: 095969017879
Item #: 905256
Available to Order
$4816.53 each
Availability
Location Available Qty
Fluke
METROLOGY WELL: The Model 9172 provides temperatures from 35 degrees Celsius to 425 degrees Celsius with a calibrated display accurate to plus or minus0.2 degrees Celsius at 425 degrees Celsius. In addition to exceptional accuracy, the 9172 is stable from plus or minus0.005 degrees Celsius to plus or minus0.01 degrees Celsius, depending on temperature. With 203 mm (8 in) of immersion, the 9172 significantly reduces stem conduction errors at high temperatures. Insert A, Al-Brnz, Misc Holes, 35 DEG C to 425 DEG C. Includes INSX.
MFR: Fluke
MFR #: 9172-A-156
UPC: 095969294324
Item #: 825522
Available to Order
$16050.94 each
Availability
Location Available Qty
Fluke
Insert, Size: 1/4 IN, For 9102 Handheld Dry-Wells
MFR: Fluke
MFR #: 3102-4
UPC: 095969122290
Item #: 871564
Available to Order
$406.96 each
Availability
Location Available Qty
Fluke
METROLOGY WELL: Lightweight, portable, and fast Insert A, imperial misc. holes , 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics. Includes test leads, and 6-pin DIN connector for reference probe.
MFR: Fluke
MFR #: 9144-A-P-156
UPC: 095969420266
Item #: 640584
Available to Order
$14309.25 each
Availability
Location Available Qty
Fluke
Changeable inserts are sized for probes with the named diameter. Use extra inserts to extend the range of hole sizes available or to back up or change existing inserts. This insert is intended for use with the 9009 Industrial Dual-Block Dry-Well. Hole size: 3/8 in (9.5 mm) (9102, 9009)
MFR: Fluke
MFR #: 3102-6
UPC: 095969122313
Item #: 905261
Available to Order
$449.06 each
Availability
Location Available Qty
Fluke
PRECISION PROCESS CALIBRATOR, 115V WITH OPERATING RANGE OF 0 DEC C TO 50 DEG C.
MFR: Fluke
MFR #: 7526A-156
UPC: 095969643573
Item #: 345872
Available to Order
$17424.64 each
Availability
Location Available Qty
Fluke
METROLOGY WELL: If you need more depth, the Model 9171 provides 203 mm (8 in) of immersion over temperatures from 30 degrees Celsius all the way to 155 degrees Celsius with full-range stability of plus or minus0.005 degrees Celsius. Just like the 9170, this dry-well has exceptional axial and radial uniformity. The display of the 9171 is calibrated to an accuracy of plus or minus0.1 degrees Celsius over its full range. Insert A, Al-Brnz, Misc Holes, -30 DEG C to 155 DEG C. Includes INSX.
MFR: Fluke
MFR #: 9171-A-156
UPC: 095969294089
Item #: 825521
Available to Order
$20883.06 each
Availability
Location Available Qty
Fluke
Changeable inserts are sized for probes with the named diameter. Use extra inserts to extend the range of hole sizes available or to back up or change existing inserts. This insert is intended for use with the 9009 Industrial Dual-Block Dry-Well. Hole size: 5/16 in (7.9 mm) (9102, 9009)
MFR: Fluke
MFR #: 3102-5
UPC: 095969122306
Item #: 905260
Available to Order
$406.96 each
Availability
Location Available Qty
Fluke
Changeable inserts are sized for probes with the named diameter. Use extra inserts to extend the range of hole sizes available or to back up or change existing inserts. This insert is designed for use with the 9140 Field Dry-Well. Holes: none (blank).
MFR: Fluke
MFR #: 3140-1
UPC: 095969122849
Item #: 912848
Available to Order
$544.18 each
Availability
Location Available Qty
Fluke
Temp. Range -25 to 150degrees Celsius (-13 to 302degrees Fahrenheit). Compact size and light weight enable easy portability in the field. Built-in reference thermometer accuracy to plus or minus0.01degrees Celsius eliminates the need to carry a separate process calibrator. 6-pin DIN Connector, Test Lead Kit, and Clamp-on ferrites (3) in -P model only. Insert A: 3/8, Three 1/4, 3/16, 1/8
MFR: Fluke
MFR #: 9142-A-P-156
UPC: 095969419444
Item #: 640583
Available to Order
$16510.91 each
Availability
Location Available Qty
Fluke
Changeable inserts are sized for probes with the named diameter. Use extra inserts to extend the range of hole sizes available or to back up or change existing inserts. This insert is intended for use with the 9009 Industrial Dual-Block Dry-Well. Hole size:7/16 in (11.1 mm) (9102, 9009)
MFR: Fluke
MFR #: 3102-7
UPC: 095969122320
Item #: 905262
Available to Order
$419.44 each
Availability
Location Available Qty
Fluke
Precision Infrared Calibrator, 15 degrees Celsius to 120 degrees Celsius
MFR: Fluke
MFR #: 4180-156
UPC: 095969441087
Item #: 691836
Available to Order
$18494.28 each
Availability
Location Available Qty
Fluke
INSERT, BLANK, 9144 WITH A TEMPERATURE RANGE OF 50 DEC C TO 660 DEG C.
MFR: Fluke
MFR #: 9144-INSZ
UPC: 095969420617
Item #: 640586
Available to Order
$1077.44 each
Availability
Location Available Qty
Fluke
THERMOCOUPLE CALIBRATOR
MFR: Fluke
MFR #: FLUKE-714B/EN
UPC: 095969686419
Item #: 686246
Available to Order
$3114.24 each
Availability
Location Available Qty
Fluke
FLUKE-712B Handheld RTD Temperature Calibrator
MFR: Fluke
MFR #: FLUKE-712B/EN
UPC: 095969686402
Item #: 1316107
Available to Order
$3114.24 each
Availability
Location Available Qty
Discontinued
INSERT, BLANK, 9142
Fluke
Blank insert
MFR: Fluke
MFR #: 9142-INSZ
UPC: 095969419796
Item #: 640585
Available to Order
$711.02 each
Availability
Location Available Qty
Discontinued
DRYWELL, FIELD W/ 3103-3, 110V 50/60HZ
Fluke
Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert B features two wells each of 3/8, 1/4, and 3/16 inches in diameter for doing comparison calibrations.
MFR: Fluke
MFR #: 9103-B-156
UPC: 095969128605
Item #: 1121171
Available to Order
$8176.72 each
Availability
Location Available Qty
Discontinued
DRYWELL, DUAL-BLOCK (BLK), 110V
Fluke
Fluke Calibration Industrial Dual-Block Thermometer Dry-Well Calibrator with Two 1/4 and Two 3/16 Inserts, Black Case, 110V, 50/60Hz.
MFR: Fluke
MFR #: 9009-B-156
UPC: 095969128421
Item #: 871581
Available to Order
$13227.13 each
Availability
Location Available Qty
Discontinued
INSERT, D , 9011/9103
Fluke
Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is designed for use with the 9103 Field Dry-Well. Insert D 9103.
MFR: Fluke
MFR #: 3103-6
UPC: 095969205573
Item #: 912644
Available to Order
$620.58 each
Availability
Location Available Qty
Discontinued
MICRO-BATH, -5 TO 125C, 110V 50/60HZ
Fluke
Need portability and extreme stability. Hart Micro-Baths have both. We invented the Micro-Bath. While many have tried to replicate it they can't use the proprietary Hart Scientific controllers, so none of them deliver performance like a Hart bath. Micro-Baths can be used anywhere for any type of sensor. It is smaller and lighter than most dry-wells, has a spill-proof lid, and easy to carry. Micro-Baths can even be transported with the fluid in them. Range: -5 degrees Celsius to 125 degrees Celsius (23 degrees Fahrenheit to 257 degrees Fahrenheit)
MFR: Fluke
MFR #: 7102-156
UPC: 095969128254
Item #: 647228
Available to Order
$13180.35 each
Availability
Location Available Qty
Discontinued
DRYWELL, H&HELD HI-TEMP, BLOCK B
Fluke
This dry-well is only four inches high and six inches wide, reaches temperatures as low as 10degrees Celsius, includes a NIST-traceable calibration, and is stable to plus or minus0.05degrees Celsius. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient. It has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. It also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable. Block B has four holes that accept probe diameters of 3/8, 1/4, 3/16 and 1/8.
MFR: Fluke
MFR #: 9100S-B-156
UPC: 095969205603
Item #: 500672
Available to Order
$4816.53 each
Availability
Location Available Qty
Discontinued
INSERT, E,9142,0.25(IN) REF,MISC(MM) HLS
Fluke
Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm
MFR: Fluke
MFR #: 9142-INSE
UPC: 095969419765
Item #: 903896
Available to Order
$835.76 each
Availability
Location Available Qty
Discontinued
CALIBRATOR 9132, IR, 110V 50/60HZ
Fluke
For IR calibrations above normal ambient, the 9132 provides a steady blackbody target up to 500degrees Celsius (932degrees Fahrenheit). With precision to plus or minus0.5degrees Celsius and stability to plus or minus0.1degrees Celsius, this new portable IR unit can certify most handheld pyrometers. Short heating and cooling times mean you won't have to wait extended periods of time to get your work done. From room temperature to 500degrees Celsius the 9132 will be stable within 30 minutes. You won't find a more compact IR calibrator. Range: 50 to 500degrees Celsius (122 to 932degrees Fahrenheit)
MFR: Fluke
MFR #: 9132-156
UPC: 095969128865
Item #: 947797
Available to Order
$10529.63 each
Availability
Location Available Qty
Discontinued
Fluke
INSERT, E,9171, METRIC,0.25 IN REF,MISC HLS 10mm, 8mm, 6mm, , 4mm, 3mm
MFR: Fluke
MFR #: 9171-INSE
UPC: 095969294928
Item #: 1379912
Available to Order
$962.06 each
Availability
Location Available Qty
Discontinued
May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.
Fluke
May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.
MFR: Fluke
MFR #: 9140-A-156
UPC: 095969128926
Item #: 912847
Available to Order
$7113.31 each
Availability
Location Available Qty
Discontinued
DRYWELL, FIELD W/3140-3, 110V 50/60HZ
Fluke
May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert B (comparison block): 2 3/8,2 1/4, and 2 3/16 holes.
MFR: Fluke
MFR #: 9140-B-156
UPC: 095969128940
Item #: 756371
Available to Order
$7113.31 each
Availability
Location Available Qty
Discontinued
DRYWELL, FIELD W/ 3103-2, 110V 50/60HZ
Fluke
Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert A handles a full range of probe sizes with a single well of each size.
MFR: Fluke
MFR #: 9103-A-156
UPC: 095969128582
Item #: 822939
Available to Order
$8176.72 each
Availability
Location Available Qty
Discontinued
FURNACE, 1200C TC W/3150-2, 110V 50/60HZ
Fluke
If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert A (variety block) 1/2, 3/8, 1/4, 3/16, 1/8, and 1/16 holes.
MFR: Fluke
MFR #: 9150-A-156
UPC: 095969129046
Item #: 948022
Available to Order
$18848.23 each
Availability
Location Available Qty
Discontinued
FURNACE, 1200C TC W/3150-3, 110V 50/60HZ
Fluke
If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert B (comparison block) 2Ea 3/8, 2Ea 1/4, and 2Ea 3/16 holes.
MFR: Fluke
MFR #: 9150-B-156
UPC: 095969129060
Item #: 948025
Available to Order
$18848.23 each
Availability
Location Available Qty
Discontinued
CALIBRATOR 9133, IR, 110V 50/60HZ
Fluke
If you're calibrating IR guns at cold temperatures, this is for you. With solid-state cooling technology, this new IR calibrator reaches -30degrees Celsius (22degrees Fahrenheit) in standard ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice buildup on the target can be avoided. At the upper end of its range, the 9133 provides steady temperatures to 160degrees Celsius (320degrees Fahrenheit). With heating and cooling times of about 15 minutes from ambient to either extreme, this gets you to the temperature quickly and performs when it gets there. Compare your IR devices to the temperature display-its factory calibrated to be within plus or minus0.4degrees Celsius (plus or minus0.7degrees Fahrenheit). No other IR calibrators give you this level of precision in such compact packages. Whatever your temperature application, trust a Hart product to solve it. Range: -30 to 150degrees Celsius @ 23degrees Celsius ambient (-22 to 302degrees Fahrenheit @ 73degrees Fahrenheit ambient)
MFR: Fluke
MFR #: 9133-156
UPC: 095969128889
Item #: 691837
Available to Order
$14883.06 each
Availability
Location Available Qty
Discontinued
DRYWELL, DUAL-BLOCK (YEL), 110V
Fluke
Comes in a yellow airtight and watertight case
MFR: Fluke
MFR #: 9009-Y-156
UPC: 095969128445
Item #: 646219
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty