Hand Tools

Showing 49 - 96 of 730 Items
Filters Clear Filters
expand_less Brand (2)
+ Show 35 More
expand_less Ways to Shop
  • Greenlee
  • Power-Strut
Greenlee
All-inclusive tool kit designed with the professional in mind. Kit Includes: Professional Tool Backpack (0158-26), 9" Side Cutting Pliers - Molded Grip (0151-09M), 8" Diagonal Pliers - Molded Grip (0251-08M), 8" Long Nose Pliers - Molded Grip (0351-08M), 10" Pump Pliers - Molded Grip (0451-10M), Pro Stainless Wire Stripper - 10-18 AWG (1955-SS), Non-Metallic Cable Ripper (0252-11), Stainless Stripping/Crimping Combo Tool (1927-SS), Cable Cutter (727M), Utility-Folding Knife (0652-22), Flat-Key Screwdriver 1/4X4" (0153-11C), Flat-Key Screwdriver 5/16X6" (0153-15C), Flat-Cab Screwdriver 3/16X6" (0153-22C), Flat-Cab Screwdriver 1/4X6" (0153-26C), Phillips Screwdriver #1X3" (0153-31C), Phillips Screwdriver #2X4" (0153-33C), Screw-Holding Driver 3/16X6" (0453-14C), 3" Awl - Steel Cap (9753-12C), 10" Adjustable Wrench - Dipped Grip (0154-10D), 9-Piece Folding Hex-Key Set (0254-11), 25' Power Return Rule (0155-25A), Torpedo Level (L107), 18 oz Electricians Hammer (0156-11), 8-Pocket Leather Pouch (0258-11), Tradesman XL Gloves (0358-14XL), 2" Leather Belt (9858-11), Non-Contact Voltage Detector (GT-12A), 12" Hacksaw (333A).
MFR: Greenlee
MFR #: 0159-28BKPK
UPC: 783310073857
Item #: 792536
Available to Order
$944.99 each
Availability
Location Available Qty
Greenlee
12 Ton Multi Tool, Li-Ion Standard 120V charger. Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications. Equipped with Bluetooth Communication enabled via the Greenlee Gator Eye app. Features LED display screen communicating pressure and battery levels as well as tool diagnostics with real-time tool feedback. State of the art 18 V Lithium Ion (Li-Ion) battery provides 70 percent more cycles per charge and faster cycle times. Retraction Stop Repeat (RSR) allows the operator to partially retract the ram and then the tool repeats the retraction for subsequent crimps. LED light provides the operator with the battery charge and tool maintenance status. Two-stage hydraulic system provides fast advance and power speeds, saving time. Forward handle position improves tool balance. One trigger controls all tool functions. Crimping head rotates 350. Tools automatically retract when the crimping cycle is complete. Overmolded tacky grip areas make gripping the tool easier and more comfortable. LED work light illuminates dark work areas. Greenlee battery-powered crimping tools now use bio-degradable oil. Smart chargers control the charging current, charging voltage and battery temperature to maximize battery life. Optional CCX Blades and adapters. U.S. Patent #6,206,663, #6,532,790. When used with Greenlee KC12 and KA12 dies in combination with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and Thomas& Betts color-coded connectors, crimps on connections up to750 kcmil are UL and cUL classified. The tools also accept all industry U type dies. These tools drive knockout punches through 5-5/8" diameter.
MFR: Greenlee
MFR #: E12CCXLX11
UPC: 783310611462
Item #: 701155
Available to Order
$8886.20 each
Availability
Location Available Qty
Greenlee
K05-SYNCRO K-Series Mechanical Crimper 8 to 1/0 AWG
MFR: Greenlee
MFR #: K05-SYNCRO
UPC: 783310064404
Item #: 555333
Available to Order
$393.11 each
Availability
Location Available Qty
Greenlee
Diagonal Cutting Pliers 8" with Dipped Grip. Double layered vinyl handles for comfort and slip resistance. Reduced handle size allows for easy storage of tools in pouches and tool bags. Forged from chrome vanadium steel for greater durability and strength. Precision-machined and laser-hardened blades strengthen cutters and provide consistent performance. Effectively cuts most hardened wire, ACSR, bolts, screws and nails. Dual cutting edges for optimum cutting performance. Exceeds ASME/ANSI specifications. Rugged riveted construction for smooth precise action. Lifetime limited warranty. Note: This is not an insulated tool.
MFR: Greenlee
MFR #: 0251-08D
UPC: 783310892540
Item #: 65729
Available to Order
$38.45 each
Availability
Location Available Qty
Greenlee
Deburs ID and OD of 1/2 IN, 3/4 IN and 1 IN thin wall conduit. Handle marked for easy identification. Hardened blade for longer life. Hooded, flat tip driver used to fasten EMT fittings. Soft, cushioned grip for extra comfort and torque. Replaceable blade. Lifetime limited warranty. Note: This is not an insulated tool.
MFR: Greenlee
MFR #: 9753-11C
UPC: 783310546962
Item #: 122859
Available to Order
$40.64 each
Availability
Location Available Qty
Greenlee
Heavy-Duty Cabinet Tip Screwdriver. 3/16" round shank x 6" flat blade screwdriver. Narrow cabinet tip for limited access applications. Handle marked for easy identification of screwdriver size, type and length. Precision-machined tips for accurate fastener contact. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.
MFR: Greenlee
MFR #: 0153-22C
UPC: 783310546535
Item #: 203584
In Stock -
$10.36 each
Availability
Location Available Qty
Greenlee
Heavy-Duty Phillips Tip Screwdriver #3 x 6". Precision-machined tips for exact fit. Handle marked for easy identification of screwdriver size, type and length. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.
MFR: Greenlee
MFR #: 0153-35C
UPC: 783310546603
Item #: 655505
Available to Order
$13.63 each
Availability
Location Available Qty
Greenlee
Forged from chrome vanadium steel for greater durability and strength. Precision-machined and laser-hardened blades strengthen cutters and provide consistent performance. Effectively cuts most hardened wire, ACSR, bolts, screws and nails. Through-hardened steel forlonger life. Dual cutting edges for optimum cutting performance. Exceeds ASME/ANSI specifications. Rugged riveted construction for smooth precise action. Lifetime limited warranty. Note: This is not an insulated tool. Molded Grip Only: Custom grip allows area for user identification. Flared handles for added comfort and leverage. Wider grip design provides larger load bearing area for user comfort.
MFR: Greenlee
MFR #: 0251-08AM
UPC: 783310547402
Item #: 63140
Available to Order
$47.75 each
Availability
Location Available Qty
Greenlee
Over-molded rugged design for heavy-duty use and comfort. Fully-adjustable blade tension up to 30,000 psi for longer blade life and faster, accurate cuts. Alternative 45 DEG blade mounting allows for flush cutting. Mounting for most reciprocating saw blades for extra versatility. Handy blade storage in tubular frame. Convenient front grip feature for two-handed sawing. Complete with bi-metal blade (12 IN/24 TPI). Lifetime limited warranty.
MFR: Greenlee
MFR #: 333A
UPC: 783310236351
Item #: 38311
Available to Order
$46.93 each
Availability
Location Available Qty
Greenlee
Torpedo Level, Professional Grade. Four open vial ports for easy viewing from all sides. Perfect for pipe and conduit work. Four rare earth magnets allow for hands-free use on metal surfaces. Four vial design - 0, 30, 45, and 90. Machined from aluminum alloy and anodized to aircraft standards. V-groove on bottom for mounting on curved surface. Offsets and calculations permanently laser-engraved onto level.
MFR: Greenlee
MFR #: L107
UPC: 783310035831
Item #: 59654
Available to Order
$64.80 each
Availability
Location Available Qty
Greenlee
BITS,REPLACEMENT 6-N-1 (52024810)
MFR: Greenlee
MFR #: 9953-13
UPC: 783310563105
Item #: 60798
In Stock -
$6.63 each
Availability
Location Available Qty
Greenlee
Compact design for portability and fast, easy one-person operation. Right angle driver head rotates over 180 degrees for maneuverability in tight work areas. Easy threading draw studs with "dog point" tip helps eliminate cross-threading. Hex key access for easy removal from tool. Works with all Greenlee knockouts up to 2". Draw studs and case made in the USA. Driver manufactured in the USA from US and global components
MFR: Greenlee
MFR #: 7904SB
UPC: 783310337942
Item #: 5248
In Stock -
$1402.84 each
Availability
Location Available Qty
Greenlee
Use With AC and MC Cable up to 1 IN. Adjustable up to 1 IN outside diameter. Cuts in seconds with a few quick turns of the crank and an easy twist of the armor. Convenient under-handle blade storage holds spare blades. Quick load clamp system makes repeat cuts fast and easy. Use with replacement blades Greenlee Cat #1941-1 or #1941-5.
MFR: Greenlee
MFR #: 0952-01
UPC: 783310020721
Item #: 73411
Available to Order
$77.96 each
Availability
Location Available Qty
Greenlee
Ball bearing draw stud with 1" hex head. 3/8" x 1-5/8".
MFR: Greenlee
MFR #: 42
UPC: 783310000426
Item #: 51924
In Stock -
$42.30 each
Availability
Location Available Qty
Greenlee
Site-Rite Aluminum Hand Bender Head with Handle for 1" EMT, 3/4" Rigid/IMC. Sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light. Strong, stable square hook design. 1-1/2" bender heads both offer the power pedal feature with a larger foot area on the head for greater control, stability and leverage. Bender head has enlarged foot pedal and increased toe room to ensure greater control, stability and leverage. Bender handle has a consistent diameter, offering a bigger grip area, while still straight up and down for fast 30 degree bends. Lifetime Limited Warranty.
MFR: Greenlee
MFR #: 842AH
UPC: 783310126782
Item #: 61540
Available to Order
$161.13 each
Availability
Location Available Qty
Greenlee
Replacement Draw Stud for Quick Draw, Quick Draw 90 and Quick Draw Flex Kits. 3/8" x 2-13/16"
MFR: Greenlee
MFR #: 1614SS
UPC: 783310300434
Item #: 188081
Available to Order
$27.31 each
Availability
Location Available Qty
Greenlee
Single Blade for 1940
MFR: Greenlee
MFR #: 14977
UPC: 783310002888
Item #: 111389
Available to Order
$17.06 each
Availability
Location Available Qty
Greenlee
Metal Stud Punch 1-11/32" (22.2 mm) Diameter. Punch up through 20 gauge (0.9 mm) steel studs in one stroke. Aluminum head provides strength with minimum weight, reducing operator fatigue. Contoured handle design gives better operator leverage and makes it possible to punch in tight places. Self-stripping design eliminates punch hang-ups. Automatically centers holes on standard studs. Conversion kit available to up grade early models from 24 gauge to 20 gauge maximum capacity.
MFR: Greenlee
MFR #: 710
UPC: 783310212850
Item #: 69624
Available to Order
$483.35 each
Availability
Location Available Qty
Greenlee
5 Pack Blades for 1940
MFR: Greenlee
MFR #: 15097
UPC: 783310337355
Item #: 71626
Available to Order
$70.85 each
Availability
Location Available Qty
Greenlee
Site-Rite Aluminum Hand Bender Head with Handle for 1/2" EMT. Sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light. Strong, stable square hook design. 1-1/2" bender heads both offer the power pedal feature with a larger foot area on the head for greater control, stability and leverage. Bender head has enlarged foot pedal and increased toe room to ensure greater control, stability and leverage. Bender handle has a consistent diameter, offering a bigger grip area, while still straight up and down for fast 30 degree bends. Lifetime Limited Warranty.
MFR: Greenlee
MFR #: 840AH
UPC: 783310126768
Item #: 135034
Available to Order
$79.33 each
Availability
Location Available Qty
Greenlee
Site-Rite Aluminum Hand Bender Head with Handle for 3/4" EMT, 1/2" Rigid/IMC. Sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light. Strong, stable square hook design. 1-1/2" bender heads both offer the power pedal feature with a larger foot area on the head for greater control, stability and leverage. Bender head has enlarged foot pedal and increased toe room to ensure greater control, stability and leverage. Bender handle has a consistent diameter, offering a bigger grip area, while still straight up and down for fast 30 degree bends. Lifetime Limited Warranty.
MFR: Greenlee
MFR #: 841AH
UPC: 783310126775
Item #: 60793
Available to Order
$94.04 each
Availability
Location Available Qty
Greenlee
PVC Heating Blanket for 2" - 3" PVC makes bends, offsets or saddles for PVC fast and easy. Easy to use: wrap blanket around PVC, secure with hook and loop strap. Built-In stiffeners help keep the blanket tight to the PVC surface. Remove blanket and form bend by hand. Controlled, even heating for uniform bending. Heavy-Duty cord and thermostat for long life. Temperature over 300 F (149 C).
MFR: Greenlee
MFR #: 860-3
UPC: 783310314875
Item #: 42797
Available to Order
$1053.26 each
Availability
Location Available Qty
Greenlee
Replacement Draw Stud for Manual Drivers. 3/4" x 2-15/16". (19mm x 75mm)
MFR: Greenlee
MFR #: 304AVBB
UPC: 783310040422
Item #: 50206
In Stock -
$47.20 each
Availability
Location Available Qty
Greenlee
Slug-Buster 1/2" - 1-1/4" Manual Knockout Set. For use with new Greenlee KRW-1 high-leverage ratchet wrench. Slug-Buster punch profile splits slugs for easy slug removal. Knurled edge on punches for better grip. New die design optimized for widest range of materials and drivers. Laser markings for quick part identification. Alignment markings for improved accuracy. Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Punches, dies and case made in the USA. Draw stud manufactured in the USA from US and global components.
MFR: Greenlee
MFR #: 7235BB
UPC: 783310320135
Item #: 108453
Available to Order
$295.01 each
Availability
Location Available Qty
Greenlee
Cable Cutter that easily cuts heavier copper and aluminum cables up to 2/0 (70 mm2). Precision-ground, shear-action, curved cutting blades. PVC-covered, high-leverage handles for easier cuts. Heat-treated for long life. Made of heavy-duty forged steel. Rust-resistant black oxide finish.
MFR: Greenlee
MFR #: 727
UPC: 783310312918
Item #: 170887
Available to Order
$46.25 each
Availability
Location Available Qty
Greenlee
Simple, one-hand operation. Compact - convenient for working in tight places and stores easily in tool pouches. Single-speed ratchet mechanism. Blade release allows blades to be opened in mid-cut. Heavy-duty blades provide long life.
MFR: Greenlee
MFR #: 759
UPC: 783310452775
Item #: 67435
Available to Order
$399.27 each
Availability
Location Available Qty
Greenlee
Slug-Splitter SC Punch 1/2" Conduit Size
MFR: Greenlee
MFR #: 28154
UPC: 783310281542
Item #: 154562
Available to Order
$159.95 each
Availability
Location Available Qty
Greenlee
For maximum draw stud life, greenlee recommends the use of battery or hydraulic drivers.
MFR: Greenlee
MFR #: 20963
UPC: 783310209638
Item #: 146975
Available to Order
$57.70 each
Availability
Location Available Qty
Greenlee
BLADES,REPLACEMENT (1903) (52040989)
MFR: Greenlee
MFR #: 13544
UPC: 783310135449
Item #: 1350
Available to Order
$65.71 each
Availability
Location Available Qty
Greenlee
Bends offsets in one easy operation. Insert conduit, depress handle, release and remove conduit. Makes identical offsets every time for wall mounted boxes with exposed conduit. Creates offset that matches the knockout in box. Maximum offset of 0.56" (9/16). For 3/4" EMT
MFR: Greenlee
MFR #: 1811
UPC: 783310141594
Item #: 124119
Available to Order
$608.45 each
Availability
Location Available Qty
Greenlee
High finish stainless steel handle with molded features for added comfort in rugged environments. Quick-change locking blade holder and lock-back feature for added safety and convenience. Belt clip adds convenience. Includes 10 extra blades. Uses standard utility blades.
MFR: Greenlee
MFR #: 0652-22
UPC: 783310000419
Item #: 16150
Available to Order
$24.99 each
Availability
Location Available Qty
Greenlee
Slug-Buster Punch 1/2" Conduit Size. Packaged
MFR: Greenlee
MFR #: 721-1/2P
UPC: 783310019800
Item #: 49982
Available to Order
$40.64 each
Availability
Location Available Qty
Greenlee
11 ton hydraulic knockout kit with hand pump and Slug-Buster 1/2"-4". Compact lightweight design for portability and fast, easy one-person operation. Slug-Buster punch profile splits slugs for easy slug removal. Knurled edge on punches for better grip. New die design optimized for widest range of materials and drivers. Laser markings for quick part identification. Alignment markings for improved accuracy. Easy threading draw studs with "dog point" tip helps eliminate cross-threading. Hex key access for easy removal from tool. Works with all Greenlee knockouts. Same draw studs used with Intelli-PUNCH, LS50L2 and 746A ram. Punches, dies, draw studs and case made in the USA. Driver manufactured in the USA from US and global components
MFR: Greenlee
MFR #: 7310SB
UPC: 783310343615
Item #: 188643
Available to Order
$2754.66 each
Availability
Location Available Qty
Greenlee
1/2" Conduit Slug-Buster SC Die. 7/8" (.885 mm) Actual Hole Size. Packaged Replacement Die
MFR: Greenlee
MFR #: 14722P
UPC: 783310019923
Item #: 49232
Available to Order
$21.45 each
Availability
Location Available Qty
Greenlee
3 Conduit Size Die
MFR: Greenlee
MFR #: 1432AV
UPC: 783310041832
Item #: 146753
Available to Order
$167.34 each
Availability
Location Available Qty
Greenlee
Replacement Draw Stud 7/16" x 4-1/4" for Slug-Buster SC Knockout Punches.
MFR: Greenlee
MFR #: 29451
UPC: 783310294511
Item #: 156606
Available to Order
$98.34 each
Availability
Location Available Qty
Greenlee
Slug-Buster Replacement Punch 3" Actual Hole Size.
MFR: Greenlee
MFR #: 1431AV
UPC: 783310041801
Item #: 39006
Available to Order
$222.50 each
Availability
Location Available Qty
Greenlee
Eliminates time-consuming hand sawing and filing when making keyways for push-button switches. Use as a nibbler to make wider or deeper keyways. Punches 1/8 IN (3.2 mm) or 3/16 IN (4.8 mm) keyways for 7/8 IN (22.5 mm) or 1-7/32 IN (30.5 mm) push-button holes.
MFR: Greenlee
MFR #: 720
UPC: 783310265344
Item #: 129473
Available to Order
$440.45 each
Availability
Location Available Qty
Greenlee
Ratchet action for fast, easy cutting. Heat-treated, replaceable steel blade for long cutting life. Rugged metal alloy frame for durability.
MFR: Greenlee
MFR #: 864
UPC: 783310042532
Item #: 42387
Available to Order
$97.63 each
Availability
Location Available Qty
Greenlee
Electric PVC Heater for 1/2" - 4", all schedules with motorized rotation. Easy to use preheat for 10 minutes, open lid and position PVC, close lid, rotate until pliable, open lid, remove PVC and form bend. Heavy-duty metal construction with reflective interior for fast, efficient heating. Full length door for easy PVC loading and removal. On/off switch with indicator light. Sturdy wheels for easy mobility. Has two units in tandem to heat large sweep bends. Heats 50" long section of pipe.
MFR: Greenlee
MFR #: 851
UPC: 783310355779
Item #: 50710
Available to Order
$2064.80 each
Availability
Location Available Qty
Greenlee
ECONCRMPR,SLIDE-ON
MFR: Greenlee
MFR #: 45501
UPC: 783310455011
Item #: 250037
Available to Order
$118.05 each
Availability
Location Available Qty
Greenlee
SADDLE UNIT ASSY,BENDER-4" (881CT)
MFR: Greenlee
MFR #: 26594
UPC: 783310265948
Item #: 851275
Available to Order
$438.01 each
Availability
Location Available Qty
Greenlee
CRIMP TOOL,DIELESS-REMOTE
MFR: Greenlee
MFR #: RK06AT
UPC: 783310060666
Item #: 234273
Available to Order
$2763.01 each
Availability
Location Available Qty
Greenlee
CRIMP TOOL,DIELESS-REMOTE FT
MFR: Greenlee
MFR #: RK06FT
UPC: 783310061977
Item #: 234366
Available to Order
$3944.09 each
Availability
Location Available Qty
Greenlee
CRIMP TOOL,DIELESS-HYDRAULIC FT
MFR: Greenlee
MFR #: HK06FT
UPC: 783310061960
Item #: 234185
Available to Order
$5104.25 each
Availability
Location Available Qty
Greenlee
CRIMPING TOOL SA 12T 42MM(RK1240)
MFR: Greenlee
MFR #: RK1240
UPC: 783310053514
Item #: 456147
Available to Order
$2835.35 each
Availability
Location Available Qty
Greenlee
COUPLING WELDMENT-3"
MFR: Greenlee
MFR #: 782
UPC: 783310007821
Item #: 168841
Available to Order
$320.91 each
Availability
Location Available Qty
Greenlee
SADDLE UNIT,BENDER 2-1/2" (881CT)
MFR: Greenlee
MFR #: 26580
UPC: 783310265801
Item #: 3564
Available to Order
$419.46 each
Availability
Location Available Qty