N2LS28366

Appleton Electric

Appleton

Mexico

No

For Manufacturing Plants, Refineries, Petrochemical And Chemical Plants, Waste And Sewerage Treatment Facilities, Food Processing Facilities

Maintenance Free Sealed Lead Acid

(2) 8 WTT 6 VDC Sealed Beam Halogen

Compression Molded, Fiberglass Reinforced Polyester (FRP) Body, Mounting Feet, Neoprene Gasket, Glass Filled Polyester With Zinc Plated Steel Insert Hub, Noryl Thermoplastic Lamphead

The electronics consist of a solid-state charger, transfer circuit and low-voltage battery disconnect circuit; The unit test switch and AC "on" indicator light are mounted on the system housing using a neoprene o-ring gasket to seal out moisture and liquids; Housing allows for the attachment of single or dual 8 or 12 WTT halogen sealed beam heads (wattage cannot exceed unit capacity); Capacity is sufficient for the connection of 36 or 72 output WTT (maximum); Units provide 90 MINT of emergency operation; The solid-state charger maintains battery at full charge; Upon failure or 35 PCT dip of utility voltage (AC), the DC emergency lighting load is connected to the battery; During emergency operation, automatic battery protection from deep discharge damage is provided by a low-voltage battery disconnect (LVD) circuit; Upon restoration of normal power, the charger brings the battery to full capacity within acceptable UL time standards; A pilot light indicates the presence of AC line voltag

Class I, Division 2, Groups B, C, D; Class I, Zone 2, Group IIB + H2; UL Listed: E175025, 924; NFPA 101 Life Safety Code

781381849685

00781381849685

N2LS Series Emergency Lighting System With 2 Direct Mount Lamp

Harsh Temperature: 0 - 40 DEG C, Ambient Temperature: 0 - 40 DEG C, Supply Wire: 60 DEG C

120 - 277

36 W