Electrical Relays and Accessories

Showing 1 - 48 of 100 Items
Filters Clear Filters
expand_less Brand (1)
+ Show 14 More
expand_less Available Inventory
expand_less Ways to Shop
  • Littelfuse
Littelfuse
The ALT alternating relays are used to alternate between two loads. The ALT is commonly used in duplex pumping applications to balance the runtime of both pumps. The ALT-S is used in single high-level float applications. When the float switch opens, the alternating relay changes state, forcing the other pump to run the next time the float closes. All ALT relays have a built-in debounce feature that prevents the relay from changing state if the switch or float contact bounces momentarily. The ALT-X has an internal cross-connected relay and is used in dual high-level float applications. These floats are commonly referred to as lead and lag floats. The pumps alternate as in the ALT-S version but the crossconnected relay configuration allows both pumps to run simultaneously when both the lead and lag floats are closed. These relays are also available with a built-in switch (SW option) that is used to manually force one of the pumps to run every time the float switch is closed. This is helpful when a pump has been removed for repair or for test purposes. In the case of the ALT-X-SW, the switch essentially forces one pump to be the lead pump, while still allowing the second to run when both floats are closed. Must use the OT08PC socket for UL Rating!
MFR: Littelfuse
MFR #: ALT-115-S-SW
UPC: 079458991314
Item #: 1382862
In Stock -
$121.30 each
Availability
Location Available Qty
Littelfuse
Solid State Timer
MFR: Littelfuse
MFR #: KSDB314SP
UPC: 079458995565
Item #: 150727
In Stock -
$224.70 each
Availability
Location Available Qty
Littelfuse
Ground Fault Ground-Check Monitor
MFR: Littelfuse
MFR #: SE-105
UPC: 079458188233
Item #: 454484
Available to Order
$5403.53 each
Availability
Location Available Qty
Littelfuse
Gf/Gc Term Assembly 5.6V 50W Tc
MFR: Littelfuse
MFR #: SE-TA6A
UPC: 079458989540
Item #: 531235
Available to Order
$1892.70 each
Availability
Location Available Qty
Littelfuse
Used On Systems Up To 1 kV.
MFR: Littelfuse
MFR #: ER-600VC
UPC: 079458977950
Item #: 450698
Available to Order
$1632.08 each
Availability
Location Available Qty
Littelfuse
Interface between MPU-32 or FPU-32 and 5-A-secondary, 1-A-secondary, and sensitive current transformers.
MFR: Littelfuse
MFR #: MPU-CIM-00-00
UPC: 079458978247
Item #: 942988
Available to Order
$2548.90 each
Availability
Location Available Qty
Littelfuse
The MPS Motor Protection System monitors voltage, current, and temperature to provide a comprehensive package of 22 protective functions. The MPS is a modular system with integrated protection, motor control, metering, and data-logging functions. This system is typically used to provide protection for three-phase low- and medium-voltage, medium-to high-horsepower induction motors.
MFR: Littelfuse
MFR #: MPS-CTU-01-00
UPC: 079458978018
Item #: 745723
Available to Order
$18031.28 each
Availability
Location Available Qty
Littelfuse
8-Input RTD Module. Eight programmable inputs connect Pt100, Ni100, Ni120, and Cu10 RTD's to the MPS or MPU-32. Certified for use in Class I, Zone 2 hazardous locations.
MFR: Littelfuse
MFR #: MPS-RTD-01-00
UPC: 079458978087
Item #: 770490
Available to Order
$6240.93 each
Availability
Location Available Qty
Littelfuse
The MPS Motor Protection System monitors voltage, current, and temperature to provide a comprehensive package of 22 protective functions. The MPS is a modular system with integrated protection, motor control, metering, and data-logging functions. This system is typically used to provide protection for three-phase low- and medium-voltage, medium-to high-horsepower induction motors.
MFR: Littelfuse
MFR #: MPS-CTU-04-00
UPC: 079458978049
Item #: 770488
Available to Order
$24484.88 each
Availability
Location Available Qty
Littelfuse
The MPS Motor Protection System monitors voltage, current, and temperature to provide a comprehensive package of 22 protective functions. The MPS is a modular system with integrated protection, motor control, metering, and data-logging functions. This system is typically used to provide protection for three-phase low- and medium-voltage, medium-to high-horsepower induction motors.
MFR: Littelfuse
MFR #: MPS-OPI-01-00
UPC: 079458978063
Item #: 770489
Available to Order
$5957.20 each
Availability
Location Available Qty
Littelfuse
The SE-CS30 series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.
MFR: Littelfuse
MFR #: SE-CS30-70
UPC: 079458989243
Item #: 892719
Available to Order
$3372.58 each
Availability
Location Available Qty
Littelfuse
The SE-105/SE-107 is a combination ground-wire monitor and ground-fault relay for resistance-grounded systems. It continuously monitors the integrity of the ground conductor to protect portable equipment from hazardous voltages caused by ground faults. The SE-105/SE-107 is an excellent choice for trailing cables 5 kV and under in underground mining applications. For higher voltages or long-cable applications, see the SE-134C/SE-135.
MFR: Littelfuse
MFR #: SE-107
UPC: 079458987935
Item #: 1181314
Available to Order
$5403.53 each
Availability
Location Available Qty
Littelfuse
Used with the SE-325, SE-330, and SE-330AU to continuously monitor the continuity of a neutral-grounding resistor on systems up to 5 kVac. Comes with weather-protected terminals for outdoor installations.
MFR: Littelfuse
MFR #: ER-5WP
UPC: 079458977943
Item #: 817720
Available to Order
$10666.93 each
Availability
Location Available Qty
Littelfuse
The SE-105/SE-107 is a combination ground-wire monitor and ground-fault relay for resistance-grounded systems. It continuously monitors the integrity of the ground conductor to protect portable equipment from hazardous voltages caused by ground faults. The SE-105/SE-107 is an excellent choice for trailing cables 5 kV and under in underground mining applications. For higher voltages or long-cable applications, see the SE-134C/SE-135.
MFR: Littelfuse
MFR #: SE-105D
UPC: 079458987874
Item #: 1029133
Available to Order
$7380.43 each
Availability
Location Available Qty
Littelfuse
The SE-330AU is an advanced earth-fault and earthing-resistor monitoring relay for low- and medium-voltage transformers and generators. It monitors neutral current, neutral-to-earth voltage, and neutral-to-earth resistance. It provides continuous monitoring of the neutral-to-earth path to verify that the neutral-earthing resistor (NER) is intact. This is of utmost importance;an open NER renders current-sensing earth-fault protection inoperative and could result in a false belief that the system is functioning properly. The SE-330AU earth-fault function complies with AS/NZS 2081.3:2002. For non-AS/NZS 2081 applications, see the SE-330 or SE-330HV. The SE-330AU New Revision provides these additional features: 100 trip records with date and time stamp, A mini-USB interface to view measured values, configure settings and check event records using SE-MON330 v3.2 or later, An on-board microSD card (included) can be used for long term data logging and firmware upgrades, Earth-fault trip level is adjustable from 0.125 to 5A (EFCT) or 0.75 to 30A (CS30). When set to MEM, the earth-fault trip level is adjustable from 2 to 100% in 1% increments of the CT-primary rating. SE-MON330 V3.2 or later is required. Dual Ethernet ports are optionally available with support for fiber and RJ45 interfaces. Connect the SE-330AU to the network using a standard Ethernet patch cable. Use of a crossover cable to connect the SE-330AU directly to the computer running IP-Config is not recommended. A typical router will assign an IP address to all connected computers that are using DHCP. The SE-330AU does not support the use of DHCP. If the SE-330AU is being set-up for first time, it is recommended to only have one SE-330AU connected to the network to prevent communication errors.
MFR: Littelfuse
MFR #: SE-330AU-03-00
UPC: 079458988673
Item #: 966698
Available to Order
$21764.55 each
Availability
Location Available Qty
Littelfuse
The SE-410 is a selector switch for use with a SE-400 or SE-100T Ground-Fault-Relay Test Unit. It allows up to ten ground-fault circuits to be individually tested with one ground-faultrelay test unit.
MFR: Littelfuse
MFR #: SE-410
UPC: 079458988963
Item #: 1255045
Available to Order
$1827.88 each
Availability
Location Available Qty
Littelfuse
50-W ground-check termination assembly with convenient mounting holes and screw terminals.
MFR: Littelfuse
MFR #: SE-TA12A
UPC: 079458989489
Item #: 482948
Available to Order
$1892.70 each
Availability
Location Available Qty
Littelfuse
The PPI-600V is a ground-wire device that allows a trailing-cable ground to be monitored independently of the parallel ground path created when trailing-cable-fed equipment is in contact with the earth. It also allows a trailing-cable ground to be monitored in the presence of stray dc and it prevents inter-machine arcing caused by the voltages induced in the cables.
MFR: Littelfuse
MFR #: PPI-600V
UPC: 079458978445
Item #: 708069
Available to Order
$19693.30 each
Availability
Location Available Qty
Littelfuse
The EFCT series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.
MFR: Littelfuse
MFR #: EFCT-2
UPC: 079458977714
Item #: 534790
Available to Order
$5271.68 each
Availability
Location Available Qty
Littelfuse
Used On Systems Up To 25 kV.
MFR: Littelfuse
MFR #: ER-25KV
UPC: 079458977912
Item #: 1180017
Available to Order
$23139.93 each
Availability
Location Available Qty
Littelfuse
Used when replacing an Atkinson Omser II with an SE-130-Series Monitor.
MFR: Littelfuse
MFR #: PMA-8
UPC: 079458978421
Item #: 1008517
Available to Order
$1641.68 each
Availability
Location Available Qty
Littelfuse
Moisture-resistant enclosure specifically designed for the ER-600VC and ER-1000HV, which protects the connection terminals from snow and rain in outdoor applications.
MFR: Littelfuse
MFR #: SE-MRE-600
UPC: 079458989458
Item #: 450700
Available to Order
$1693.50 each
Availability
Location Available Qty
Littelfuse
The SE-325 Neutral-Grounding-Resistor Monitor is used on resistance-grounded systems up to 25 kV to monitor the integrity of the neutral-to-ground path and to detect ground faults. It measures current and voltage in a transformer or generator neutral-to-ground connection and continuity of the neutral-grounding resistor (NGR). The SE-325 coordinates these three measurements to detect a loose connection, corrosion, ground fault, or NGR failure, and provides one alarm or trip output contact.
MFR: Littelfuse
MFR #: SE-325
UPC: 079458988079
Item #: 1280879
Available to Order
$5833.90 each
Availability
Location Available Qty
Littelfuse
Remote indication and reset for the SE-330, SE-330AU, and SE-330HV. NEMA 4 and NEMA 13 rating. Standard 22-mm mounting.
MFR: Littelfuse
MFR #: RK-332
UPC: 079458987836
Item #: 1204732
Available to Order
$1703.40 each
Availability
Location Available Qty
Littelfuse
The EFCT series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.
MFR: Littelfuse
MFR #: EFCT-1
UPC: 079458977684
Item #: 534791
Available to Order
$2648.65 each
Availability
Location Available Qty
Littelfuse
The SE-701 is a microprocessor-based ground-fault relay for resistance and solidly-grounded systems. In addition to common systems, it is uniquely suited for use on systems with significant harmonic content. The SE-701 can provide main-plant protection, feeder-level protection, or individual-load protection. Proper current transformer selection provides the desired pickup range. The output contacts can be connected for use in protective tripping circuits or in alarm indication circuitThe SE-701 is a microprocessor-based ground-fault relay for resistance and solidly-grounded systems. In addition to common systems, it is uniquely suited for use on systems with significant harmonic content. The SE-701 can provide main-plant protection, feeder-level protection, or individual-load protection. Proper current transformer selection provides the desired pickup range. The output contacts can be connected for use in protective tripping circuits or in alarm indication circuits. The analog output can be used with a PLC or a meter.
MFR: Littelfuse
MFR #: SE-701-0D
UPC: 079458989052
Item #: 592931
Available to Order
$4706.70 each
Availability
Location Available Qty
Littelfuse
Used to panel mount the SE-601 and SE-701.
MFR: Littelfuse
MFR #: PMA-55
UPC: 079458978384
Item #: 993346
Available to Order
$464.80 each
Availability
Location Available Qty
Littelfuse
Detects phase current or ground-fault current. (200-A primary)
MFR: Littelfuse
MFR #: CT200L
UPC: 079458977677
Item #: 1229187
Available to Order
$718.90 each
Availability
Location Available Qty
Littelfuse
Connects the SE-601 relay to an ungrounded 24 Vdc bus.
MFR: Littelfuse
MFR #: SE-GRM125
UPC: 079458989342
Item #: 796805
Available to Order
$1535.43 each
Availability
Location Available Qty
Littelfuse
The SE-330 is an advanced ground-fault and neutral-grounding resistor monitoring relay that is compliant with Rule10-302 of the 2018 Canadian Electrical Code Part I (CE Code). It measures neutral current, neutral-to-ground voltage, and neutral-to-ground resistance. It provides continuous monitoring of the neutral-to-ground path to verify that the neutral-grounding resistor (NGR) is intact and that it has not been bypassed or shorted. An open NGR renders currentsensing ground-fault protection inoperative and could result in a false belief that the system is functioning properly. A shorted NGR results in higher-than-expected ground-fault current. The SE-330 can be used with low- and medium-voltage transformers and generators with low- or high-resistance grounding used in processing, manufacturing, chemical, pulp and paper, petroleum, and water-treatment facilities. For high-voltage applications, use the SE-330HV. For applications that require conformance to Australian standards, use the SE-330AU.
MFR: Littelfuse
MFR #: SE-330-SMA
UPC: 079458988604
Item #: 1204733
Available to Order
$1221.45 each
Availability
Location Available Qty
Littelfuse
The SE-134C/SE-135 is a microprocessor-based, combination ground-wire monitor and ground-fault relay for resistance-grounded or solidly grounded systems. It continuously monitors the integrity of the ground conductor to protect portable equipment from hazardous voltages caused by ground faults. The SE-134C/SE-135 is field proven in monitoring trailing cables on large mobile equipment such as drag-lines, mining shovels, shore-to-ship power cables, dock-side cranes, stacker-reclaimers, submersible pumps, and portable conveyors.
MFR: Littelfuse
MFR #: SE-134-SMA
UPC: 079458987997
Item #: 1254924
Available to Order
$1315.30 each
Availability
Location Available Qty
Littelfuse
Operates on DC ungrounded systems ranging from industrial 24- Vdc control circuits to 1000-Vdc solar and transportation systems. It provides sensitive ground-fault protection without the problems associated with nuisance tripping. Ground-fault current is sensed using an SE-GRM Series Ground-Reference Module a resistor network that limits ground-fault current to 25 mA.
MFR: Littelfuse
MFR #: SE-601-0U
UPC: 079458989038
Item #: 796799
Available to Order
$5289.55 each
Availability
Location Available Qty
Littelfuse
The EFCT series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.
MFR: Littelfuse
MFR #: EFCT-26
UPC: 079458977721
Item #: 866232
Available to Order
$1658.45 each
Availability
Location Available Qty
Littelfuse
Used for rough cutouts and when replacing the AB Bulletin 1406.
MFR: Littelfuse
MFR #: PMA-14
UPC: 079458978315
Item #: 770491
Available to Order
$1413.90 each
Availability
Location Available Qty
Littelfuse
50-W ground-check termination assembly with convenient mounting holes and wire leads.
MFR: Littelfuse
MFR #: SE-TA6A-WL
UPC: 079458989557
Item #: 656337
Available to Order
$2172.15 each
Availability
Location Available Qty
Littelfuse
Operates on AC solidly grounded and AC resistance grounded systems. The SE-704 is a microprocessor-based ground-fault relay for resistance- and solidly-grounded systems. It offers very sensitive ground-fault detection as low as 10 mA and can be used on systems with significant harmonic content.The SE-704 provides feeder-level protection or individual-load protection. The output contacts can be connected for use in protective tripping circuits or in alarm indication circuits. The analog output can be used with a PLC or a meter.
MFR: Littelfuse
MFR #: SE-704-0U
UPC: 079458989151
Item #: 1278820
Available to Order
$4000.00 each
Availability
Location Available Qty
Littelfuse
The SE-CS10 series current transformers (CTs) are key components of the Littelfuse protection relay product line. Littelfuse SE-134C and SE-135 Ground-Fault Ground-Check Monitors are designed specifically for use with the SE-CS10 CTs. A Littelfuse SE-330 Neutral-Grounding-Resistor Monitor and a Littelfuse SE-701 Ground-Fault Monitor can also be equipped with the SE-CS10 series to achieve the desired ground-fault-trip settings. Littelfuse motor- and feeder-protection relays can also make use of the SE-CS10 series either to measure phase current or ground-fault current.
MFR: Littelfuse
MFR #: SE-CS10-8
UPC: 079458989199
Item #: 584009
Available to Order
$3312.88 each
Availability
Location Available Qty
Littelfuse
Used On Systems Up To 15 kV.
MFR: Littelfuse
MFR #: ER-15KV
UPC: 079458977905
Item #: 501382
Available to Order
$9320.65 each
Availability
Location Available Qty
Littelfuse
The FPU-32 Feeder Protection Unit provides integrated protection, metering, and data-logging functions. It is an excellent choice for retrofitting and upgrading older relays because of its compact size and ability to use existing CTs. The FPU-32 is used to protect distribution feeders in processing, manufacturing, petroleum, chemical, and wastewater treatment facilities.
MFR: Littelfuse
MFR #: FPU-32-04-00
UPC: 079458978001
Item #: 942831
Available to Order
$16048.05 each
Availability
Location Available Qty
Littelfuse
The KRDB Series is a compact time delay relay measuring only 2 in. (50.8 mm) square. Its microcontroller timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRDB Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output relay energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: KRDB424
UPC: 079458994629
Item #: 1202509
Available to Order
$294.40 each
Availability
Location Available Qty
Littelfuse
The TDUS Series combines digital timing circuitry with universal voltage operation. Voltages of 24 to 240VAC and 12 to 24VDC are available in three ranges. The TDUS Series offers DIP switch selectable time delays ranging from 0.1 seconds to 102.3 minutes in three ranges. Its 1A rated output, ability to operate on multiple voltages, and wide range of switch selectable time delays make the TDUS Series an excellent choice for process control systems and OEM equipment. Operation (Single Shot): Input voltage must be applied before and during timing. Upon momentary or maintained closure of the initiate switch (leading edge triggered), the output energizes for a measured interval of time. At the end of the delay, the output de-energizes. Opening or reclosing the initiate switch during timing has no affect on the time delay. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reset occurs when the time delay is complete and the initiate switch is opened. Loss of input voltage resets the timedelay and output.
MFR: Littelfuse
MFR #: TDUSL3000A
UPC: 079458007381
Item #: 873129
Available to Order
$334.05 each
Availability
Location Available Qty
Littelfuse
The KRDB Series is a compact time delay relay measuring only 2 in. (50.8 mm) square. Its microcontroller timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRDB Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output relay energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: KRDB115M
UPC: 079458994513
Item #: 1305639
Available to Order
$294.40 each
Availability
Location Available Qty
Littelfuse
The 201-xxx-SP is an 8-pin octal-base, plug-in voltage monitor designed to protect single-phase motors regardless of size. The 201-100-SP is used on 95-120VAC, 50/60Hz motors to prevent damage caused by low voltage. The 201-200-SP is used on 190-240VAC, 50/60Hz motors. The 201-200-SP-T-9 is a pin-for-pin replacement for a Time Mark; #260 Series voltage monitor. High voltage protection is included in the 201-200-SP-T-9. The unique microcontroller-based voltage and voltage-sensing circuit constantly monitors the voltage to detect harmful power line conditions. When a harmful condition is detected, the relays output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level and a specified amount of time has elapsed (restart delay). The trip delay prevents nuisance tripping due to rapidly fluctuating power line conditions.
MFR: Littelfuse
MFR #: 201-200-SP
UPC: 079458990164
Item #: 748352
Available to Order
$490.55 each
Availability
Location Available Qty
Littelfuse
The ECS Series of single-phase AC current sensors is a universal, overcurrent or undercurrent sensing control. Its built-in toroidal sensor eliminates the inconvenience of installing a stand-alone current transformer. Includes onboard adjustments for current sensing mode, trip point, and trip delay. Detects over or undercurrent events like locked rotor, loss of load, an open heater or lamp load, or proves an operation is taking place or has ended. Operation: Input voltage must be supplied at all times for proper operation. When a fault is sensed throughout the trip delay, the output relay is energized. When the current returns to the normal run condition or zero, the output and the delay are reset. If a fault is sensed and then corrected before the trip delay is completed, the relay will not energize and the trip delay is reset to zero.
MFR: Littelfuse
MFR #: ECS40BC
UPC: 079458992410
Item #: 948125
Available to Order
$564.60 each
Availability
Location Available Qty
Littelfuse
The Littelfuse 231-Insider-P fits inside 1/3, 1/2, 3/4, and 1 hp, 230V control boxes and are designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid-cycle, overvoltage, and undervoltage conditions. A calibration adjustment allows the Insider to be calibrated to your specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A unique microcontroller-based voltage and current-sensing circuit constantly monitors the incoming power for fluctuations, overcurrent, and undercurrent. When an abnormality, such as loss of suction is detected, the product deactivates its output relay and directly disconnects the pump motor. The relay then begins its user-selectable restart delay (dry-well recovery) timer. When the timer counts to zero or power is removed and reapplied, the relay reactivates its output relay and turns the pump back on. By leaving the restart delay knob in the reset position, the relay will operate in manual reset mode. The Insider communicates with a hand-held diagnostics tool called the Informer (sold separately). The Informer displays parameters including calibration points, trip points, run time and last faults. An IR Kit-12 (12 fiber optic kit) is included with each Insider, allowing the Informer to access these parameters even when the Insider is enclosed in a control box. This is valuable for troubleshooting the pump while it is running.
MFR: Littelfuse
MFR #: 231-INSIDER-P
UPC: 079458990300
Item #: 1193651
Available to Order
$719.68 each
Availability
Location Available Qty
Littelfuse
The 233P is a single-phase pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle, overvoltage and undervoltage conditions. The 233P protects 230 volt, 2 or 3 wire, 1/3 to 3hp pumps. A calibration adjustment allows the 233P to be calibrated to your specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A proprietary microcontroller based voltage, power factor and current-sensing circuit constantly monitors for power fluctuations, overcurrent and underload conditions. When an abnormality, such as loss of suction, is detected, the 233P deactivates its output relay and directly disconnects the pump motor. The relay then begins its user-selectable Restart Delay (dry-well recovery) timer. When the timer expires or power is removed and reapplied, the relay reactivates its output relay and allows the pump to turn back on. An infrared LED communicates directly with a hand-held diagnostic tool called the Informer (sold separately).
MFR: Littelfuse
MFR #: 233P-1.5-ENCL
UPC: 079458990348
Item #: 1029249
Available to Order
$1015.13 each
Availability
Location Available Qty
Littelfuse
The KSDB is designed for general purpose commercial and industrial applications where a small, cost effective, reliable solid-state timer is required. The factory calibration for fixed time delays is within 5% of the target time delay. The repeat accuracy, under stable conditions, is 0.5% of the selected time delay. This series is designed for popular AC and DC voltages. Time delays of 0.1 seconds to 1000 minutes are available in 6 ranges. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output energizes if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: KSDB2115S
UPC: 079458995534
Item #: 771312
Available to Order
$224.70 each
Availability
Location Available Qty
Littelfuse
The KRDM Series is a compact time delay relay measuring only 2 in. (50.8 mm) square. Its solid-state timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRDM Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life. Operation (Delay-on-Make): Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output relay energizes and remains energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: KRDM121
UPC: 079458994759
Item #: 882548
Available to Order
$257.48 each
Availability
Location Available Qty