Discontinued
Telemecanique
INCREMENTAL ENCODER 500 PTS 5 30V DC,58 mm,IP65 conforming to IEC 60529,driver push-pull,incremental encoder
MFR: Schneider Electric
MFR #: XCC1510PS05Y
Item #: 304044
Discontinued
Schneider Electric
INCREMENTAL ENCODER 500 PTS 5 30V DC,58 mm,IP65 conforming to IEC 60529,driver push-pull,incremental encoder
MFR #: XCC1510PS05Y
Item #: 304044
Availability
| Location | Available Qty |
|---|---|
| Available | Available to Order |
incremental encoder 58 - solid shaft 10 mm - 500 points - push-pull
Catalog Number
XCC1510PS05Y
Manufacturer
Schneider Electric
Brand
Telemecanique
Sub Brand
XCC
Country of Origin
France
Made in USA
No
Connection
1 MALE CONNECTOR M23 RADIAL 12 PINS
Enclosure
ZAMAK
Output
DRIVER PUSH-PULL,LOW LEVEL: 0.5 V MAXIMUM 20 MA-HIGH LEVEL: V SUPPLY - 2.5 V MINIMUM 20 MA,TYPE Y
Power Supply
0...75 MA NO-LOAD,5...30 V DC
Special Features
REVERSE POLARITY PROTECTION-SHORT-CIRCUIT PROTECTION
Speed Range
9000 RPM
Speed Rating
9000 RPM
Standard
1 KV SIGNAL PORTS LEVEL 3 IEC 61000-4-4-2 KV POWER PORTS LEVEL 3 IEC 61000-4-4,1 KV, LEVEL 2 IEC 61000-4-5,10 V/M LEVEL 3 IEC 61000-4-3,30 GN 11 MS IEC 60068-2-27,4 KV CONTACT DISCHARGE) LEVEL 3 IEC 61000-4-2-8 KV AIR DISCHARGE) LEVEL 3 IEC 61000-4-2,CE,IP65 IEC 60529
GTIN
03389119014649
Item Type
INCREMENTAL ENCODER
Size
58 MM
Operating Temperature
-30-100 A Degrees C