Testing and Measuring Instruments

Showing 577 - 624 of 644 Items
Filters Clear Filters
expand_less Brand (6)
+ Show 22 More
expand_less Ways to Shop
  • Dynatel
  • Fluke
  • Greenlee
  • Lutron
  • Rittal
  • SensorSwitch
Greenlee
TESTER,ELECTRICAL 1000V 600A (CMT-90) (50121235)
MFR: Greenlee
MFR #: CMT-90
UPC: 783310121237
Item #: 269630
Available to Order
$365.73 each
Availability
Location Available Qty
Greenlee
Digital AC/DC Multimeter CatIII 600V Manual Ranging. Measures AC/DC voltage, AD/DC current and resistance. Diode and audible continuity tests. Tests 1.5V and 9V batteries. Lifetime Limited Warrranty.
MFR: Greenlee
MFR #: DM-25
UPC: 783310003342
Item #: 39484
Available to Order
$57.92 each
Availability
Location Available Qty
Greenlee
CLAMPMETER, AC (CM-860) (POP)
MFR: Greenlee
MFR #: CM-860
UPC: 783310022107
Item #: 244026
Available to Order
$287.60 each
Availability
Location Available Qty
Greenlee
CLAMPMETER, AC/DC (CM-960) (POP)
MFR: Greenlee
MFR #: CM-960
UPC: 783310021926
Item #: 219515
Available to Order
$363.14 each
Availability
Location Available Qty
Greenlee
CLAMPMETER, AC/DC (CMI-600) (POP)
MFR: Greenlee
MFR #: CMI-600
UPC: 783310021919
Item #: 328014
Available to Order
$439.03 each
Availability
Location Available Qty
Greenlee
1000A AC True RMS Clamp Meter. Measures AC current. AC voltage measurement with digital low pass filter for accurate readings on variable frequency drives. Also measures DC voltage, resistance, capacitance and frequency. Tests continuity and diodes. Flashlight inside clamp jaw for easier work in dark locations. Backlight & relative mode for added versatility. AmpTip increases accuracy on small wires and low current. Two voltage detection modes - non-contact or using a single test lead. Data hold. Recording of Maximum, Minimum, and Average readings. Lifetime Limited Warranty.
MFR: Greenlee
MFR #: CM-1360
UPC: 783310021902
Item #: 590982
Available to Order
$409.01 each
Availability
Location Available Qty
Greenlee
CLAMPMETER, AC/DC (CM-1560)(POP)
MFR: Greenlee
MFR #: CM-1560
UPC: 783310021889
Item #: 543892
Available to Order
$494.17 each
Availability
Location Available Qty
Greenlee
CLAMPMETER, AC/DC (CMI-1000) (POP)
MFR: Greenlee
MFR #: CMI-1000
UPC: 783310021872
Item #: 446891
Available to Order
$584.15 each
Availability
Location Available Qty
Greenlee
DMM, 600V AC/DC, 10A, CAP, TEMP (DM-45)
MFR: Greenlee
MFR #: DM-45
UPC: 783310003373
Item #: 40063
Available to Order
$120.71 each
Availability
Location Available Qty
Greenlee
Automatic Electrical Tester. Hassle-free, automatic measurement of amperage, voltage,and resistance. Low impedance eliminates stray or "ghost" voltage readings. Compact design for measuring in tight spaces. 400A AC, 600V AC/DC measurement. Data hold to capture important readings. Auto off for longer battery life. Accessories included: One (1) 9 V battery, test leads, carrying case. Lifetime Limited Warranty.
MFR: Greenlee
MFR #: CMT-80
UPC: 783310077350
Item #: 34742
Available to Order
$188.53 each
Availability
Location Available Qty
Greenlee
MULTIMETER, POCKET (PDMM-20)
MFR: Greenlee
MFR #: PDMM-20
UPC: 783310116899
Item #: 99254
Available to Order
$82.51 each
Availability
Location Available Qty
Greenlee
CLAMPMETER,400A AC (CM-330)
MFR: Greenlee
MFR #: CM-330
UPC: 783310118657
Item #: 284113
Available to Order
$153.31 each
Availability
Location Available Qty
Greenlee
CLAMPMETER-TRMS 2000A PWR FACTOR
MFR: Greenlee
MFR #: CMP-200
UPC: 783310075684
Item #: 226399
Available to Order
$1778.18 each
Availability
Location Available Qty
Greenlee
DMM, 1000V AC/DC, 10A, CAP, TEMP (DM-65)
MFR: Greenlee
MFR #: DM-65
UPC: 783310003397
Item #: 27864
Available to Order
$206.11 each
Availability
Location Available Qty
Greenlee
Measures these AWG wire gages: 18, 16, 14, 12, 10, 8, 6,4, 2 , 1/0, 2/0, 3/0, 4/0. Measures these kcmil wire sizes: 250, 350, 400, 500, 600, 750, 1000. Eight user-programmable settings for other gages. Powered by (6) 1.5V AA batteries. Replacement calibration rods (pair) available as CLM-ROD, UPC 02721. Replacement Kelvin clips (pair) available as CLM-CLIPS, UPC 02722.
MFR: Greenlee
MFR #: CLM-1000
UPC: 783310027195
Item #: 316825
Available to Order
$957.03 each
Availability
Location Available Qty
Greenlee
Measures these metric wiresizes: 0.75, 1, 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70, 95,120, 150, 185, 240, 300, 400,500 mm2 . Eight user-programmable settings for other sizes . Powered by (6) 1.5V AA batteries . Replacement calibration rods (pair) available as CLM-ROD, UPC 02721 . Replacement Kelvin clips (pair) available as CLM-CLIPS, UPC 02722 .
MFR: Greenlee
MFR #: CLM-1000E
UPC: 783310027201
Item #: 249287
Available to Order
$975.73 each
Availability
Location Available Qty
Greenlee
Dual Laser Infrared Thermometer offers safe, non-contact temperature measurement. Laser spot indicator shows approximate center of target measurement area. Display temperatures in either Fahrenheit or Celsius. Adjustable emissivity for optimum temperature reading accuracy on a wide range of materials and surfaces. Min, Max, Difference and Average temperature functions. Backlight display for easy readings in any environment. Auto power off for longer battery life.
MFR: Greenlee
MFR #: TG-2000
UPC: 783310001041
Item #: 191852
Available to Order
$293.19 each
Availability
Location Available Qty
Greenlee
Infrared Thermometer offers safe, non-contact temperature measurement. Laser spot indicator shows approximate center of target measurement area. Display temperatures in either Fahrenheit or Celsius. Adjustable emissivity for optimum temperature reading accuracy on a wide range of materials and surfaces. Min, Max, Difference and Average temperature functions. Backlight display for easy readings in any environment. Auto power off for longer battery life.
MFR: Greenlee
MFR #: TG-1000
UPC: 783310001034
Item #: 835730
Available to Order
$181.57 each
Availability
Location Available Qty
Greenlee
CS-8000 Circuit Seeker Tracer
MFR: Greenlee
MFR #: CS-8000
UPC: 783310121268
Item #: 93156
Available to Order
$1675.35 each
Availability
Location Available Qty
Greenlee
TEST LEADS, REPLACEMENT (CMT-80) (50113720)
MFR: Greenlee
MFR #: 11372
UPC: 783310113720
Item #: 97337
Available to Order
$39.93 each
Availability
Location Available Qty
Discontinued
Fluke
PROBE, SECON. PRT, 100 OHM (3/16 X 9 INCH) Type P: Info-Con for 1523 or 1524
MFR: Fluke
MFR #: 5615-9-P
UPC: 095969482271
Item #: 1194562
Available to Order
$2713.10 each
Availability
Location Available Qty
Discontinued
Fluke
Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert A handles a full range of probe sizes with a single well of each size.
MFR: Fluke
MFR #: 9103-A-156
UPC: 095969128582
Item #: 822939
Available to Order
$8661.64 each
Availability
Location Available Qty
Discontinued
Fluke
REFERENCE PRESSURE GAUGE G70M
MFR: Fluke
MFR #: 2700G-G70M
UPC: 095969623568
Item #: 640588
Available to Order
$3032.74 each
Availability
Location Available Qty
Discontinued
Fluke
This four channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.
MFR: Fluke
MFR #: 294-U115V
UPC: 095969287852
Item #: 682349
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
A selection of universal waveform generators offering superior performance and excellent value. This two channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces
MFR: Fluke
MFR #: 282-U115V
UPC: 095969287913
Item #: 682343
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
This one channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.
MFR: Fluke
MFR #: 291-U115V
UPC: 095969287784
Item #: 682347
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
A selection of universal waveform generators offering superior performance and excellent value. This one channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces
MFR: Fluke
MFR #: 281-U115V
UPC: 095969287883
Item #: 682342
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
This two channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.
MFR: Fluke
MFR #: 292-U115V
UPC: 095969287821
Item #: 682348
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Soft case compatible with many Fluke tools. The case top opens vertically for easy removal of tools with elastic loops inside to hold tools in place. A main storage section with a separate nylon pocket for storing accessories. Durable polyester design for long life. The case is compatible with many Fluke test tools including: T6 and T5 Series, T+/T+PRO, 110 Series, 170 Series, 233, 87V, 83V, 3000 FC, 70/370 FC Series, 902/902 FC, PRV240/PRV240FS, and 62 MAX/MAX+.
MFR: Fluke
MFR #: C60
UPC: 095969866705
Item #: 995229
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Test Lead Set, Included: Safety Designed Ground Leads, Shrouded Plugs And Notched Tip, Maximum Voltage: 600 VRMS, 1 AMP Maximum Current, Bandwidth: 12.5 MHZ, Length: 1.2 MR, For Use With The Fluke ScopeMeter 120 Series Hand Held Oscilloscopes
MFR: Fluke
MFR #: STL120-III
UPC: 095969601085
Item #: 397141
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
A selection of universal waveform generators offering superior performance and excellent value. This four channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces
MFR: Fluke
MFR #: 284-U115V
UPC: 095969287944
Item #: 682344
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
The fast one-handed tool for mA loop checks in Ex zones. The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2
MFR: Fluke
MFR #: FLUKE-707EX
UPC: 095969207287
Item #: 253503
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads. The Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics. One of the leading wattage meters of the world, the multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit. Besides effectively performing basic tasks like measuring wattage, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.
MFR: Fluke
MFR #: FLUKE-345
UPC: 095969344999
Item #: 200691
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Extended Fine Point Tip Adapter Set, Model: 8845A, Voltage Rating: 300 VRMS/VDC, Amperage Rating: 3 AMP, Diameter: Tip: 0.08 IN Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, UL94 V-2 Fire Retardant, Color: One Red And One Black, IEC 1010-2-0331, Category II, P2 Compliant
MFR: Fluke
MFR #: 8845A-EFPT
UPC: 095969370547
Item #: 370145
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Calculate energy loss in dollars. The Fluke 434 II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality.
MFR: Fluke
MFR #: FLUKE-434-II
UPC: 095969615532
Item #: 125418
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Leak Detector Flashlight, UV Refrigerant Detection Method, Temperature Rating: 0 - 50 DEG C, Power Supply: AAA Battery, 395 N-M Wavelength, Includes: Detachable Key Chain Carabiner And AAA Batteries, For HVAC Technicians
MFR: Fluke
MFR #: RLD2
UPC: 095969484923
Item #: 786542
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Blank insert
MFR: Fluke
MFR #: 9142-INSZ
UPC: 095969419796
Item #: 640585
Available to Order
$740.64 each
Availability
Location Available Qty
Discontinued
Fluke
Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert B features two wells each of 3/8, 1/4, and 3/16 inches in diameter for doing comparison calibrations.
MFR: Fluke
MFR #: 9103-B-156
UPC: 095969128605
Item #: 1121171
Available to Order
$8661.64 each
Availability
Location Available Qty
Discontinued
Fluke
Fluke Calibration Industrial Dual-Block Thermometer Dry-Well Calibrator with Two 1/4 and Two 3/16 Inserts, Black Case, 110V, 50/60Hz.
MFR: Fluke
MFR #: 9009-B-156
UPC: 095969128421
Item #: 871581
Available to Order
$14002.08 each
Availability
Location Available Qty
Discontinued
Fluke
Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is designed for use with the 9103 Field Dry-Well. Insert D 9103.
MFR: Fluke
MFR #: 3103-6
UPC: 095969205573
Item #: 912644
Available to Order
$654.89 each
Availability
Location Available Qty
Discontinued
Fluke
Need portability and extreme stability. Hart Micro-Baths have both. We invented the Micro-Bath. While many have tried to replicate it they can't use the proprietary Hart Scientific controllers, so none of them deliver performance like a Hart bath. Micro-Baths can be used anywhere for any type of sensor. It is smaller and lighter than most dry-wells, has a spill-proof lid, and easy to carry. Micro-Baths can even be transported with the fluid in them. Range: -5 degrees Celsius to 125 degrees Celsius (23 degrees Fahrenheit to 257 degrees Fahrenheit)
MFR: Fluke
MFR #: 7102-156
UPC: 095969128254
Item #: 647228
Available to Order
$14501.04 each
Availability
Location Available Qty
Discontinued
Fluke
This dry-well is only four inches high and six inches wide, reaches temperatures as low as 10degrees Celsius, includes a NIST-traceable calibration, and is stable to plus or minus0.05degrees Celsius. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient. It has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. It also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable. Block B has four holes that accept probe diameters of 3/8, 1/4, 3/16 and 1/8.
MFR: Fluke
MFR #: 9100S-B-156
UPC: 095969205603
Item #: 500672
Available to Order
$5098.75 each
Availability
Location Available Qty
Discontinued
Fluke
Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm
MFR: Fluke
MFR #: 9142-INSE
UPC: 095969419765
Item #: 903896
Available to Order
$865.38 each
Availability
Location Available Qty
Discontinued
Fluke
For IR calibrations above normal ambient, the 9132 provides a steady blackbody target up to 500degrees Celsius (932degrees Fahrenheit). With precision to plus or minus0.5degrees Celsius and stability to plus or minus0.1degrees Celsius, this new portable IR unit can certify most handheld pyrometers. Short heating and cooling times mean you won't have to wait extended periods of time to get your work done. From room temperature to 500degrees Celsius the 9132 will be stable within 30 minutes. You won't find a more compact IR calibrator. Range: 50 to 500degrees Celsius (122 to 932degrees Fahrenheit)
MFR: Fluke
MFR #: 9132-156
UPC: 095969128865
Item #: 947797
Available to Order
$10953.74 each
Availability
Location Available Qty
Discontinued
Fluke
May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.
MFR: Fluke
MFR #: 9140-A-156
UPC: 095969128926
Item #: 912847
Available to Order
$7398.65 each
Availability
Location Available Qty
Discontinued
Fluke
May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert B (comparison block): 2 3/8,2 1/4, and 2 3/16 holes.
MFR: Fluke
MFR #: 9140-B-156
UPC: 095969128940
Item #: 756371
Available to Order
$7398.65 each
Availability
Location Available Qty
Discontinued
Fluke
If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert A (variety block) 1/2, 3/8, 1/4, 3/16, 1/8, and 1/16 holes.
MFR: Fluke
MFR #: 9150-A-156
UPC: 095969129046
Item #: 948022
Available to Order
$19950.62 each
Availability
Location Available Qty
Discontinued
Fluke
If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert B (comparison block) 2Ea 3/8, 2Ea 1/4, and 2Ea 3/16 holes.
MFR: Fluke
MFR #: 9150-B-156
UPC: 095969129060
Item #: 948025
Available to Order
$19950.62 each
Availability
Location Available Qty