Testing and Measuring Instruments

Showing 721 - 749 of 749 Items
Filters Clear Filters
expand_less Brand (5)
+ Show 22 More
expand_less Ways to Shop
  • Eaton
  • Fluke
  • Klein Tools
  • Lutron
  • SensorSwitch
Discontinued
Fluke
This dry-well is only four inches high and six inches wide, reaches temperatures as low as 10degrees Celsius, includes a NIST-traceable calibration, and is stable to plus or minus0.05degrees Celsius. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient. It has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. It also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable. Block B has four holes that accept probe diameters of 3/8, 1/4, 3/16 and 1/8.
MFR: Fluke
MFR #: 9100S-B-156
UPC: 095969205603
Item #: 500672
Available to Order
$5227.92 each
Availability
Location Available Qty
Discontinued
Fluke
Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm
MFR: Fluke
MFR #: 9142-INSE
UPC: 095969419765
Item #: 903896
Available to Order
$856.92 each
Availability
Location Available Qty
Discontinued
Fluke
For IR calibrations above normal ambient, the 9132 provides a steady blackbody target up to 500degrees Celsius (932degrees Fahrenheit). With precision to plus or minus0.5degrees Celsius and stability to plus or minus0.1degrees Celsius, this new portable IR unit can certify most handheld pyrometers. Short heating and cooling times mean you won't have to wait extended periods of time to get your work done. From room temperature to 500degrees Celsius the 9132 will be stable within 30 minutes. You won't find a more compact IR calibrator. Range: 50 to 500degrees Celsius (122 to 932degrees Fahrenheit)
MFR: Fluke
MFR #: 9132-156
UPC: 095969128865
Item #: 947797
Available to Order
$10796.38 each
Availability
Location Available Qty
Discontinued
Fluke
May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.
MFR: Fluke
MFR #: 9140-A-156
UPC: 095969128926
Item #: 912847
Available to Order
$7293.51 each
Availability
Location Available Qty
Discontinued
Fluke
May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert B (comparison block): 2 3/8,2 1/4, and 2 3/16 holes.
MFR: Fluke
MFR #: 9140-B-156
UPC: 095969128940
Item #: 756371
Available to Order
$7293.51 each
Availability
Location Available Qty
Discontinued
Fluke
Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert A handles a full range of probe sizes with a single well of each size.
MFR: Fluke
MFR #: 9103-A-156
UPC: 095969128582
Item #: 822939
Available to Order
$8881.08 each
Availability
Location Available Qty
Discontinued
Fluke
If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert A (variety block) 1/2, 3/8, 1/4, 3/16, 1/8, and 1/16 holes.
MFR: Fluke
MFR #: 9150-A-156
UPC: 095969129046
Item #: 948022
Available to Order
$20456.05 each
Availability
Location Available Qty
Discontinued
Fluke
If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert B (comparison block) 2Ea 3/8, 2Ea 1/4, and 2Ea 3/16 holes.
MFR: Fluke
MFR #: 9150-B-156
UPC: 095969129060
Item #: 948025
Available to Order
$20456.05 each
Availability
Location Available Qty
Discontinued
Fluke
If you're calibrating IR guns at cold temperatures, this is for you. With solid-state cooling technology, this new IR calibrator reaches -30degrees Celsius (22degrees Fahrenheit) in standard ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice buildup on the target can be avoided. At the upper end of its range, the 9133 provides steady temperatures to 160degrees Celsius (320degrees Fahrenheit). With heating and cooling times of about 15 minutes from ambient to either extreme, this gets you to the temperature quickly and performs when it gets there. Compare your IR devices to the temperature display-its factory calibrated to be within plus or minus0.4degrees Celsius (plus or minus0.7degrees Fahrenheit). No other IR calibrators give you this level of precision in such compact packages. Whatever your temperature application, trust a Hart product to solve it. Range: -30 to 150degrees Celsius @ 23degrees Celsius ambient (-22 to 302degrees Fahrenheit @ 73degrees Fahrenheit ambient)
MFR: Fluke
MFR #: 9133-156
UPC: 095969128889
Item #: 691837
Available to Order
$15260.10 each
Availability
Location Available Qty
Discontinued
Fluke
Comes in a yellow airtight and watertight case
MFR: Fluke
MFR #: 9009-Y-156
UPC: 095969128445
Item #: 646219
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing
MFR: Fluke
MFR #: TL225
UPC: 095969288781
Item #: 232057
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke Networks
CABLEIQ QUALIFICATION TESTER
MFR: Fluke
MFR #: CIQ-100
UPC: 754082022602
Item #: 11791
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke Networks
COPPER/FIBER TECHNICIANS KIT (CIQ-KIT + FTK1000)
MFR: Fluke
MFR #: CIQ-FTKSFP
UPC: 754082068693
Item #: 322517
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke Networks
CABLEIQ ADVANCED IT KIT
MFR: Fluke
MFR #: CIQ-KIT
UPC: 754082031963
Item #: 263093
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
EX Stik Thermometer, Fixed RTD, -80 to 300degrees Celsius Temperature Range, 0.25 Stem Diameter, 12 Stem Length
MFR: Fluke
MFR #: 1552A-12-DL
UPC: 095969583985
Item #: 707432
Available to Order
$2030.42 each
Availability
Location Available Qty
Discontinued
Fluke
VT04 Series Visual IR Thermometer, Temperature Range: -10 To 250 DEG C, Accuracy: 2 PCT Temperature Measurement, Spectral Response: 6.5 - 14 UM, Data Logging: Yes, Safety Rating: CFR47: 2009 Class A. Part 15 subpart B, CE: EN 61326:2006, IEC/EN 61010-1:2010, Battery Type: (4) AA 8 HR, Dimensions: 8.3 IN Height X 3 IN Length X 2.2 IN Width
MFR: Fluke
MFR #: FLK-VT04
UPC: 095969678278
Item #: 1004630
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Detect issues instantly. Eliminate the need for multiple temperature measurements. Fluke Visual IR Thermometers combine the convenience of a spot thermometer with the visual advantage of an infrared heat map. Designed to see it all. Every Fluke Visual IR Thermometer has a built-in digital camera with an infrared heat map overlay to instantly identify the exact location of the problem.
MFR: Fluke
MFR #: FLK-VT04A
UPC: 095969725620
Item #: 390563
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
WATER DEADWEIGHT TESTER, DUAL RANGE, 700 KGF/CM2
MFR: Fluke
MFR #: P3224-KGCM2
UPC: 095969638586
Item #: 629317
Available to Order
$41159.90 each
Availability
Location Available Qty
Discontinued
Fluke
WATER DEADWEIGHT TESTER, 10K PSI
MFR: Fluke
MFR #: P3214-PSI
UPC: 095969638517
Item #: 593913
Available to Order
$26587.26 each
Availability
Location Available Qty
Discontinued
Fluke
REFERENCE PRESSURE GAUGE G20M
MFR: Fluke
MFR #: 2700G-G20M
UPC: 095969623544
Item #: 1069661
Available to Order
$3109.58 each
Availability
Location Available Qty
Discontinued
Fluke
REFERENCE PRESSURE GAUGE BG2M
MFR: Fluke
MFR #: 2700G-BG2M
UPC: 095969623513
Item #: 650958
Available to Order
$3109.58 each
Availability
Location Available Qty
Discontinued
Fluke
REFERENCE PRESSURE GAUGE BG100K
MFR: Fluke
MFR #: 2700G-BG100K
UPC: 095969623483
Item #: 650959
Available to Order
$3109.58 each
Availability
Location Available Qty
Discontinued
Fluke
The Fluke 419D is a professional-grade laser distance meter its fast, easy to use, and fits on your tool belt. This meter will save you effort and money by reducing measurement time and errors.
MFR: Fluke
MFR #: FLUKE-419D
UPC: 095969613569
Item #: 123960
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Lutron
RadioRA 2 Wall-mount, wireless temperature sensor, 434 MHz in snow
MFR: Lutron Electronics
MFR #: LRF2-TWRB-SW
UPC: 027557800105
Item #: 258647
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1
MFR: Fluke
MFR #: VPS220-R
UPC: 095969435833
Item #: 224255
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1
MFR: Fluke
MFR #: VPS220-G
UPC: 095969435840
Item #: 224110
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Digital Precision Multimeter, Model: 8845A x, Voltage Rating: DC: 100 MILV - 1000 V, AC: 100 MILV - 750 V, Amperage Rating: DC: 200 MICAMP - 10 AMP, AC: 10 MILAMP - 10 AMP, Frequency Rating: 3 HZ - 300 KHZ, Resistance: 10 OHM - 100 MOHM, Accuracy: 0.0035 Plus 0.0005 For DC Voltage, 0.06 Plus 0.03 For AC Voltage, 0.010 Plus 0.001 For Resistance, 0.050 Plus 0.005 For DC Current, 0.10 Plus 0.04 For AC Current, 0.01 PCT Frequency, Display: VFD Dot Matrix, Dual, Temperature Rating: Operating: 0 - 55 DEG C, Storage: -40 To 70 DEG C, Diode Test: Test Current: 100 MICAMP or 1 MILAMP, Response Time: 300 Samples/S With Audible Tone, Dimensions: 3.46 IN Height X 8.56 IN Width X 11.7 IN Depth
MFR: Fluke
MFR #: 8845A120V
UPC: 095969292016
Item #: 426197
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Precision and versatility for bench or systems applications. The Fluke 8846A 6.5 digit precision multimeter has the precision and versatility to handle your most demanding measurements, on the bench or in a system. 24 ppm, USB memory.
MFR: Fluke
MFR #: 8846A/C120V
UPC: 095969353885
Item #: 512138
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
PROBE, SECON. PRT, 100 OHM (3/16 X 9 INCH) Type P: Info-Con for 1523 or 1524
MFR: Fluke
MFR #: 5615-9-P
UPC: 095969482271
Item #: 1194562
Available to Order
$2713.10 each
Availability
Location Available Qty