Testing and Measuring Instruments

Showing 49 - 96 of 268 Items
Filters Clear Filters
expand_less Brand (4)
+ Show 22 More
expand_less Ways to Shop
  • Amprobe
  • Red Lion
  • SensorSwitch
  • Sixnet
Amprobe
True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus Minus (1 PCT RDG + 3 LSD) For Resistance, Plus Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use
MFR: Fluke
MFR #: ACDC-52NAV
UPC: 095969556651
Item #: 607349
Available to Order
$798.94 each
Availability
Location Available Qty
Amprobe
Take this clamp meter to extremes. Most digital clamp meters have LCD screens that tend to freeze below 32 degrees (0 degrees Celcius) but the Amprobe RS-1007 PRO, an analog clamp meter can take extreme heat or cold and keep on measuring amps and volts-without problems or batteries.
MFR: Fluke
MFR #: RS-1007-PRO
UPC: 095969497725
Item #: 35794
Available to Order
$481.68 each
Availability
Location Available Qty
Amprobe
Complete with a full range of diagnostic capabilities including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter, the Amprobe Navigator Clamp On Meter serves as a first line of defense for power monitoring and verifying system conditions before deploying more specialized tools -- or incurring additional costs. Rated CAT IV 600 V/CAT III 1000 V, these clamp on meters offer a new innovative navigation system that eliminates confusing push buttons, and replaces them with a single joystick. Its all about easy and reliable measurements. Amprobes new line of Navigator Clamp On Meters feature quick, easy to use single hand selection of measurements. The joy stick control allows quick selection of measurement features on the display from MAX -MIN to power factor to AC- DC current, with many more available. Simply highlight the desired measurement feature using the joy stick and press to select. Rugged and CAT IV reliable, this clamp on meter also features, super bright backlight display, built-in jaw flashlight and over mold bodies to absorb shock -- all you need for commercial and industrial environments.
MFR: Fluke
MFR #: ACDC-54NAV
UPC: 095969556675
Item #: 160820
Available to Order
$992.49 each
Availability
Location Available Qty
Amprobe
Low Current Clamp On Ammeter, Amperage Rating: AC DC: 4 AMP, 40 AMP, Frequency Rating: 40 HZ - 400 HZ In AC, Measuring Range: 0 - 40 AMP DC Or AC Peak, Operating Temperature: 0 - 50 DEG C, Dimensions: 184 MM Length X 71 MM Width X 31 MM Height, Battery Type: 9 V, Alkaline PP3, NEDA 1604, Display: 4000 Count,10 MM High Characters, Maximum Jaw Opening: 19 MM Cable, Maximum Jaw Opening: 20 MM, Accuracy: Plus-Minus (1.3PCT + 5 Digits), Temperature coefficient: Plus-Minus 0.05PCT Of RDG-DEGC, Resolution: 1 MILAMP In 4 AMP Range, 10 MILAMP In 40 AMP Range, Autoranging: 4 AMP-40 AMP, CE Certified, CAT III 300V
MFR: Fluke
MFR #: LH41A
UPC: 095969416542
Item #: 783715
Available to Order
$1204.97 each
Availability
Location Available Qty
Amprobe
This current transformer probe measures AC or DC current. It converts high current to a low level millivolt signal for input directly into a test instrument. It can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.
MFR: Fluke
MFR #: CT235A
UPC: 095969414586
Item #: 607872
Available to Order
$519.52 each
Availability
Location Available Qty
Amprobe
Amprobe Clamp Multimeter with leakage current capability measures low AC current in the microamps. Great for applications requiring measurement of leakage and fault currents.
MFR: Fluke
MFR #: AC50A
UPC: 095969416719
Item #: 764819
Available to Order
$1031.79 each
Availability
Location Available Qty
Amprobe
User-friendly and accurate. Think safety and Amprobes ground resistance tester second. Use the on-board memory and data logging features to make your work more efficient.
MFR: Fluke
MFR #: DGC-1000A
UPC: 095969366311
Item #: 194199
Available to Order
$4480.85 each
Availability
Location Available Qty
Amprobe
True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus-Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus-Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus/Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus-Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus-Minus (1 PCT RDG + 3 LSD) For Resistance, Plus-Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus-Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use
MFR: Fluke
MFR #: ACD-50NAV
UPC: 095969556637
Item #: 158794
In Stock -
$601.02 each
Availability
Location Available Qty
Amprobe
Small size doesnt mean small features. This Amprobe Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction and CAT III 600V rating, this meter is a must-have professional troubleshooting tool for commercial electricians and electrical contractors.
MFR: Fluke
MFR #: AMP-25
UPC: 095969778787
Item #: 390952
Available to Order
$321.60 each
Availability
Location Available Qty
SensorSwitch
Ballast Discriminator, SKU - 184EU1
MFR: Acuity Brands
MFR #: BD1
UPC: 745975898787
Item #: 139933
Available to Order
$100.00 each
Availability
Location Available Qty
Amprobe
Contact And Non-Contact Tachometer, Range: Surface Speed (Contact): 0.1 - 1999 M MINT, 0.4 - 6550 FT MINT, Rpm Range: Rotation (Non-Contact): 1 - 99999 RPM: Rotation (Contact): 19 - 19999 RPM, Accuracy: Plus- Minus (0.02 PCT V Reading Plus- Minus1 Digit), Working Distance: 600 MM Maximum (Optical), Parts Included: 6 Adapters, Carrying Case, Reflective Tapes, Batteries And User Manual, Measuring Units: M, FT, IN, Dimensions: 175 MM Length X 60 MM Width X 28 MM Height, Battery: (2) AA1.5 V LR6 (Alakaline) Or Rechargeable, Operating Temperature: 0 - 50 DEG C, CE Certified
MFR: Fluke
MFR #: TACH20
UPC: 095969463881
Item #: 325700
Available to Order
$1113.28 each
Availability
Location Available Qty
Amprobe
Contact And Non-Contact Tachometer, Range: Surface Speed (Contact): 1 - 9999.9 M/MINT, 3 - 30,000 FT-MINT, 1 - 10,000 YD-MINT, Resolution: RPM Unit: 0.001,0.01,0.1,1, M-MINT Unit: 0.0001,0.001,0.01,0.1, Ft-MINT Unit: 0.0001, 0.001, 0.01, 0.1: YD-MINT Unit: 0.0001, 0.001, 0.01, 0.1, Rpm Range: Rotation (Non-Contact): 10 - 99999 RPM Rotation (Contact): 10 - 19999 RPM, Accuracy: Plus- Minus (0.1 PCT Of RDG + 2 Digit), Display: LCD With 15 MM Height X 33 MM Width, Working Distance: 5 - 30 CM (Non Contact), Parts Included: Meter, 9 V Battery, Cone And Funnel Contact Tips, Reflective Tape And Users Manual, Measuring Units: M, FT, YD, Dimensions: 266.6 MM Length X 177.8 MM Width X 81.28 MM Height, Battery: 9 V, Power Consumption: 5 MICAMP (Idle), 18 MILAMP (Measurement), Operating Temperature: 0 - 50 DEG C, CE Certified
MFR: Fluke
MFR #: TACH-10
UPC: 095969556699
Item #: 774607
Available to Order
$392.91 each
Availability
Location Available Qty
Amprobe
Specifically designed for electrical, HVAC, mechanical, automotive applications with a temperature measurement range of 14 F to 932 F (-10 C to 500 C). Portable, ergonomic, and easy to operate, allows for quick and accurate identification of temperature related issues for electrical connections and motors, HVAC functionality and performance, and heat loss spots on the insulation around buildings to save energy costs.
MFR: Fluke
MFR #: IRC-110
UPC: 095969853835
Item #: 788040
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Amprobe
This Anemometer with Flexible Precision Vane is ideal for HVAC technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems. It offers numerous functionsuse it to check air velocity FPM (feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement location flexibility. Switch between C and F. Input the area of airflow measurement to gain accurate air velocity results. Measure an air flow source for a continuous moving average for up to two hours. Determine minimum, maximum and average readings from a single point air source. Large dual display allows views of both air flow and velocity measurements plus temperature. Long extended flexible cord for remote vane access capabilities. All the measurements can be output to a computer for charting or analysis by optional model TM-SWA software and RS232 cable. Shipped in a deluxe hard carry case to protect and transport your Anemometer.
MFR: Fluke
MFR #: TMA10A
UPC: 095969398886
Item #: 421277
Available to Order
$672.33 each
Availability
Location Available Qty
Amprobe
This Amprobe Hot Wire anemometer technology eliminates the use of bearings and rotating parts. Because of this fact the meter is durable and provides good and stable accuracy of the measurements. Used for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems.
MFR: Fluke
MFR #: TMA-21HW
UPC: 095969556910
Item #: 333274
Available to Order
$959.02 each
Availability
Location Available Qty
Amprobe
This Amprobe Mini Vane Anemometer is a compact, pocket-sized tool for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems.
MFR: Fluke
MFR #: TMA5
UPC: 095969516150
Item #: 129392
Available to Order
$392.91 each
Availability
Location Available Qty
Amprobe
Use with all models of clamp meters. It enables the user of a clamp meter to measure the current on a 2-wire or 3-wire power cord to 15A without having to cut off the plug and separate the conductors, or opening electrical boxes on 120V lines. Includes a 10X current multiplier loop for increased sensitivity and accuracy of low-current measurements.
MFR: Fluke
MFR #: ELS2A
UPC: 095969414852
Item #: 172992
Available to Order
$40.52 each
Availability
Location Available Qty
Amprobe
This rugged and reliable clamp meter is designed for professional electrician and technician that need a fast responding, feature packed, go-to clamp meter. This meter offers a complete range of measuring functions for both HVAC and electrical applications. This modern Clamp Meter features a large low-light backlit LCD dual display for dimly lit areas and is capable of simultaneously displaying voltage and amperage to perform voltage drop tests. This meter offers TRMS, low pass filter, in-rush current, frequency, resistance, capacitance, temperature, DC micro-Amps, Amp-tip and non-contact voltage detection.
MFR: Fluke
MFR #: ACD-14-PRO
UPC: 095969806275
Item #: 557457
Available to Order
$446.76 each
Availability
Location Available Qty
Amprobe
This Amprobe Heavy Duty Multimeter is designed for professional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use applications. It's made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts. Built of tough, fire-retardant thermoplastic resistant to grease and chemical spills, with all sensitive components shock-mounted for a drop resistant to at least eight feet. This meter has an extended voltage measurement capability of 1500V DC and 1000V AC, unmatched by any other line of digital multimeters. The extended voltage ranges can withstand transients up to 12 kV.
MFR: Fluke
MFR #: HD110C
UPC: 095969353250
Item #: 380968
Available to Order
$522.43 each
Availability
Location Available Qty
Amprobe
The ultimate electronic component verifier measures inductance, capacitance, resistance, transistors, diodes and microwave diodes.
MFR: Fluke
MFR #: LCR55A
UPC: 095969414753
Item #: 588394
Available to Order
$624.30 each
Availability
Location Available Qty
Amprobe
HVAC Digital Multimeter, Voltage Rating: AC: 40 MILV, 4 V, 40 V, 400 V,600 V - DC: 400 MILV, 4 V, 40 V, 400 V, 600 V, Amperage Rating: 400 MICAMP, 4000 MICAMP, 40 MILAMP, 400 MILAMP, 4 AMP, 10 AMP, Frequency Rating: 10 HZ - 10 MHZ, Resistance: 400 OHM, 4 KOHM, 40 KOHM, 400 KOHM, 4 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, 4000 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.8 PCT RDG + 1LSD )For DC Voltage, Plus-Minus (1.2PCT RDG + 3LSD) For DC Current Plus-Minus (1.2 PCT RDG + 3LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 4000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 600 V, N10140, For HVAC Professional
MFR: Fluke
MFR #: AM-520
UPC: 095969600385
Item #: 454451
Available to Order
$142.60 each
Availability
Location Available Qty
Amprobe
Pen Probe Digital Multimeter With Built-In Test Probe, Voltage Rating: AC DC: 3.4 V, 34 V, 340 V, 600 V, Resistance: 340 OHM, 3.4 KOHM, 34 KOHM, 340 KOHM, 3.4 MOHM, 34 MOHM, Accuracy: Plus-Minus (0.5PCT RDG + 2 DGT)For DC Voltage, Plus-Minus (1.5PCT RDG + 8 DGT)For AC Voltage, Plus-Minus (1PCT RDG + 4 DGT)For Resistance, Display: 3-3-4 Digit LCD, 3400 Count, Temperature Rating: 0 - 40 DEG C, Peak Hold: No, Diode Test: Yes, Dimensions: 7.8 IN Length X 1.1 IN Width X 1.4 IN Height, CE Certified, UL 3111-1 Listed, Cat III 300 V Safety Rated, Cat II 600 V Safety Rated, For professional Use
MFR: Fluke
MFR #: DM73C
UPC: 095969365321
Item #: 620621
Available to Order
$186.26 each
Availability
Location Available Qty
Amprobe
Heavy Duty True-Rms Multimeter With Temperature, Voltage Rating: AC: 1000 MILV, 10 V, 100 V, 1500 V, DC:1000 MILV, 10 V, 100 V, 1000 V, Amperage Rating: 100 MICA, 1000 MICA, 10 MILA, 100 MILA, 400 MILA, 2 AMP, Frequency Rating: 100 HZ, 1000 HZ, 10 KHZ, 100 KHZ, 1000 KHZ, 10 M HZ, Resistance: 1000 OHM, 10 KOHM, 100 KOHM, 1000 KOHM, 10 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, Accuracy: Plus-Minus(0.1 PCT RDG + 5 DGT)For DC Voltage, Plus-Minus (1.2 PCT RDG + 10 DGT)For AC Voltage , Plus-Minus (0.5PCT RDG + 10 DGTS)For DC Current, Plus-Minus (1.5 PCT + 10 DGTS)For AC Current, Plus-Minus (0.5 PCT RDG + 8 DGTS)For Resistance, Plus-Minus(3 PCT RDG +10 DGTS)For Capacitance, Plus-Minus(2 PCT RDG + 4 DEGC)For Temperature, Display: 4 digit LCD, 9999 Counts, With Annunciators, Menu Features And 41 Segment Bargraph, Temperature Rating: -20 To 1300 DEG C, Battery: Standard 9 V, NEDA 1604, JIS 006P, IEC 6F22, Peak Hold: No, Diode Test: Yes, Enclosure: IP67, Dimensions: 200 MM Length X 102MM Width X 59 MM Height, CE,CSA Certified, CAT IV 1000 V rated, For professional Use In Harsh Environments
MFR: Fluke
MFR #: HD160C
UPC: 095969353267
Item #: 607902
Available to Order
$851.33 each
Availability
Location Available Qty
Amprobe
This high-current clamp doubles as a multimeter for AC and DC voltage, resistance and continuity.
MFR: Fluke
MFR #: ACD-6-PRO
UPC: 095969365888
Item #: 31281
Available to Order
$243.01 each
Availability
Location Available Qty
Amprobe
Diagnose potential failure with this milliohm meter, portable battery powered milliohm meter. Quickly check windings opens or shorts in motors, generators and transformers, wire-to-wire connection resistances, heating elements testing and contact resistance in critical electrical connections.
MFR: Fluke
MFR #: MO-100
UPC: 095969499194
Item #: 420416
Available to Order
$2168.38 each
Availability
Location Available Qty
Amprobe
This Amprobe Digital Clamp Multimeter is the perfect choice for HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance, frequency and true-rms accuracy. This digital clamp multimeter provides added functionality with a dual display for views of amperage and voltage simultaneously.
MFR: Fluke
MFR #: ACD-14-TRMS-PLUS
UPC: 095969436090
Item #: 142294
Available to Order
$484.59 each
Availability
Location Available Qty
Amprobe
This clamp meter works as both an HVAC multimeter and electrical multimeter with a versatile set of features, including microamps, capacitance, frequency and temperature with included thermocouple.
MFR: Fluke
MFR #: ACD-14-PLUS
UPC: 095969436083
Item #: 773424
Available to Order
$400.19 each
Availability
Location Available Qty
Amprobe
Relative Humidity Temperature Meter, Included: Carrying Case, Sensor Cover, Battery (Installed), Users Manual, Display: Dual Display, Minimum/Maximum Memory: Yes, Auto Power Off: Yes, Response Time: Humidity: 180 S, Temperature: 10 S, Dew Point Range: -20 To 60 DEG C At Plus/Minus0.8 DEG C Accuracy, Temperature Accuracy: Plus/Minus 0.8 DEG C, Wet Bulb Temperature Range: -20 To 60 DEG C At Plus/Minus0.8 DEG C Accuracy, Humidity Accuracy: Plus/Minus 3 PCT RH At 23 DEG C, Relative Humidity Range: Less Than 70 PCT, Temperature Range: 0 - 40 DEG C, Dimensions: 240 MM Length X 54 MM Width X 34 MM Height, Battery: 9 V, NEDA 1604 Or JIS 006P Or IEC6F22, Dry Bulb Temperature Range: -20 To 60 DEG C, Resolution: 0.1 PCT RH, CE Certified
MFR: Fluke
MFR #: THWD-3
UPC: 095969416726
Item #: 103175
Available to Order
$391.46 each
Availability
Location Available Qty
Amprobe
Industrial Digital Multimeter With True-Rms, Voltage Rating: AC: 6 V, 60 V, 600 V, 1000 V DC: 600 MILV, 6 V, 60 V, 600 V, 1000 V, Amperage Rating: 600 MICAMP, 6000 MICAMP, 60 MILAMP, 500 MILAMP, 10 AMP, Frequency Rating: 60 HZ, 600 HZ,6 KHZ, 60 KHZ, 600 KHZ,6 MHZ, 60 MHZ, Resistance: 600 OHM, 6 KOHM, 60 KOHM, 600 KOHM, 6 MOHM, 60 MOHM, Capacitance: 60 NFD, 600 NFD, 6 MFD, 60 MFD, 600 MFD, 6000 MFD,60 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.5 PCT RDG + 2LSD )For DC Voltage, Plus-Minus (1PCT RDG + 2LSD) For DC Current Plus-Minus (1.2 PCT RDG + 5LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 6000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 1000 V CAT III 600 V, N10140, For Professional Electricians Use
MFR: Fluke
MFR #: AM-570
UPC: 095969640862
Item #: 436228
Available to Order
$419.11 each
Availability
Location Available Qty
Amprobe
If youre looking for a versatile clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments, this Clamp Meter is the best clamp meter for the job. It is the best clamp meter in the AMP-300 Series line including all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC DC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, and continuity.
MFR: Fluke
MFR #: AMP-330
UPC: 095969770897
Item #: 436231
Available to Order
$598.11 each
Availability
Location Available Qty
Amprobe
AM-210 True-RMS AC Clamp Meter, 600 Amp
MFR: Fluke
MFR #: AMP-210
UPC: 095969770859
Item #: 557480
Available to Order
$356.53 each
Availability
Location Available Qty
Amprobe
Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC-DC current, AC- DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.
MFR: Fluke
MFR #: AMP-320
UPC: 095969770880
Item #: 446855
Available to Order
$510.79 each
Availability
Location Available Qty
Amprobe
AM-220 True-RMS AC/DC Clamp Meter, 600 Amp
MFR: Fluke
MFR #: AMP-220
UPC: 095969770866
Item #: 385200
Available to Order
$371.08 each
Availability
Location Available Qty
Amprobe
Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.
MFR: Fluke
MFR #: AMP-310
UPC: 095969770873
Item #: 639925
Available to Order
$423.47 each
Availability
Location Available Qty
Red Lion
VCM1- Voltage Converter Module, 4-50 V AC/DC
MFR: Red Lion
MFR #: VCM10000
Item #: 147846
Available to Order
$65.84 each
Availability
Location Available Qty
Red Lion
GMRTD6- Graphite Module, 6 RTD Inputs
MFR: Red Lion
MFR #: GMRTD600
Item #: 403973
Available to Order
$730.53 each
Availability
Location Available Qty
Red Lion
GMPBDP00 - Graphite Module, PROFIBUS DP Protocol
MFR: Red Lion
MFR #: GMPBDP00
Item #: 935722
Available to Order
$849.17 each
Availability
Location Available Qty
Red Lion
PAX Universal DC Input Meter, Red Display, AC Powered
MFR: Red Lion
MFR #: PAXD0000
Item #: 154573
In Stock -
$517.06 each
Availability
Location Available Qty
Red Lion
PAX Lite 6 Digit Process Time Meter
MFR: Red Lion
MFR #: PAXLPT00
Item #: 588922
Available to Order
$460.98 each
Availability
Location Available Qty
Red Lion
PAXCDS50 - Dual Triac/Dual SSR Drive Setpoint Output Card
MFR: Red Lion
MFR #: PAXCDS50
Item #: 734380
Available to Order
$131.69 each
Availability
Location Available Qty
Red Lion
PAX Rate Meter, Red Display, DC Powered
MFR: Red Lion
MFR #: PAXR0030
Item #: 71338
Available to Order
$487.86 each
Availability
Location Available Qty
Red Lion
4 Position Terminal Block
MFR: Red Lion
MFR #: TB100004
Item #: 342540
Available to Order
$10.16 each
Availability
Location Available Qty
Red Lion
CUB7 8-Digit Counter, High Voltage Input, Red Display
MFR: Red Lion
MFR #: CUB7CVR0
Item #: 711400
Available to Order
$161.01 each
Availability
Location Available Qty
Red Lion
PAXL Universal Temperature Meter, Dual Relay Output
MFR: Red Lion
MFR #: PAXLT0U0
Item #: 592134
Available to Order
$456.10 each
Availability
Location Available Qty
Red Lion
3 Position Terminal Block
MFR: Red Lion
MFR #: TB100003
Item #: 622518
Available to Order
$8.15 each
Availability
Location Available Qty
Red Lion
8-Digit Timer, Low Voltage SRC Input, Reflective Display
MFR: Red Lion
MFR #: CUB7TCS1
Item #: 8781
Available to Order
$130.31 each
Availability
Location Available Qty
Red Lion
BMK9- DIN Rail PAX Base Mount Kit
MFR: Red Lion
MFR #: BMK90000
Item #: 224709
Available to Order
$169.30 each
Availability
Location Available Qty
Red Lion
CUB5 Thermocouple Meter with Reflective Display
MFR: Red Lion
MFR #: CUB5TCR0
Item #: 163058
Available to Order
$260.35 each
Availability
Location Available Qty