Testing and Measuring Instruments

Showing 49 - 96 of 125 Items

Sort By:

Per Page

expand_less Brand (7)

+ Show 22 More

expand_less Ways to Shop

Made in USA

Amprobe

True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus Minus (1 PCT RDG + 3 LSD) For Resistance, Plus Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use

MFR: Fluke

MFR #: ACDC-52NAV

UPC: 095969556651

Item #: 607349

Available to Order

Availability

Location	Available Qty

Amprobe

Take this clamp meter to extremes. Most digital clamp meters have LCD screens that tend to freeze below 32 degrees (0 degrees Celcius) but the Amprobe RS-1007 PRO, an analog clamp meter can take extreme heat or cold and keep on measuring amps and volts-without problems or batteries.

MFR: Fluke

MFR #: RS-1007-PRO

UPC: 095969497725

Item #: 35794

Available to Order

Availability

Location	Available Qty

Amprobe

Complete with a full range of diagnostic capabilities including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter, the Amprobe Navigator Clamp On Meter serves as a first line of defense for power monitoring and verifying system conditions before deploying more specialized tools -- or incurring additional costs. Rated CAT IV 600 V/CAT III 1000 V, these clamp on meters offer a new innovative navigation system that eliminates confusing push buttons, and replaces them with a single joystick. Its all about easy and reliable measurements. Amprobes new line of Navigator Clamp On Meters feature quick, easy to use single hand selection of measurements. The joy stick control allows quick selection of measurement features on the display from MAX -MIN to power factor to AC- DC current, with many more available. Simply highlight the desired measurement feature using the joy stick and press to select. Rugged and CAT IV reliable, this clamp on meter also features, super bright backlight display, built-in jaw flashlight and over mold bodies to absorb shock -- all you need for commercial and industrial environments.

MFR: Fluke

MFR #: ACDC-54NAV

UPC: 095969556675

Item #: 160820

Available to Order

Availability

Location	Available Qty

Amprobe

Low Current Clamp On Ammeter, Amperage Rating: AC DC: 4 AMP, 40 AMP, Frequency Rating: 40 HZ - 400 HZ In AC, Measuring Range: 0 - 40 AMP DC Or AC Peak, Operating Temperature: 0 - 50 DEG C, Dimensions: 184 MM Length X 71 MM Width X 31 MM Height, Battery Type: 9 V, Alkaline PP3, NEDA 1604, Display: 4000 Count,10 MM High Characters, Maximum Jaw Opening: 19 MM Cable, Maximum Jaw Opening: 20 MM, Accuracy: Plus-Minus (1.3PCT + 5 Digits), Temperature coefficient: Plus-Minus 0.05PCT Of RDG-DEGC, Resolution: 1 MILAMP In 4 AMP Range, 10 MILAMP In 40 AMP Range, Autoranging: 4 AMP-40 AMP, CE Certified, CAT III 300V

MFR: Fluke

MFR #: LH41A

UPC: 095969416542

Item #: 783715

Available to Order

Availability

Location	Available Qty

Amprobe

This current transformer probe measures AC or DC current. It converts high current to a low level millivolt signal for input directly into a test instrument. It can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.

MFR: Fluke

MFR #: CT235A

UPC: 095969414586

Item #: 607872

Available to Order

Availability

Location	Available Qty

Amprobe

Amprobe Clamp Multimeter with leakage current capability measures low AC current in the microamps. Great for applications requiring measurement of leakage and fault currents.

MFR: Fluke

MFR #: AC50A

UPC: 095969416719

Item #: 764819

Available to Order

Availability

Location	Available Qty

Amprobe

User-friendly and accurate. Think safety and Amprobes ground resistance tester second. Use the on-board memory and data logging features to make your work more efficient.

MFR: Fluke

MFR #: DGC-1000A

UPC: 095969366311

Item #: 194199

Available to Order

Availability

Location	Available Qty

Amprobe

True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus-Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus-Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus/Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus-Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus-Minus (1 PCT RDG + 3 LSD) For Resistance, Plus-Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus-Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use

MFR: Fluke

MFR #: ACD-50NAV

UPC: 095969556637

Item #: 158794

Available to Order

Availability

Location	Available Qty

Amprobe

Small size doesnt mean small features. This Amprobe Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction and CAT III 600V rating, this meter is a must-have professional troubleshooting tool for commercial electricians and electrical contractors.

MFR: Fluke

MFR #: AMP-25

UPC: 095969778787

Item #: 390952

Available to Order

Availability

Location	Available Qty

SensorSwitch

Ballast Discriminator, SKU - 184EU1

MFR: Acuity Brands

MFR #: BD1

UPC: 745975898787

Item #: 139933

Available to Order

Availability

Location	Available Qty

Rittal Corp

Connection pin, for OM adaptor/support

MFR: Rittal

MFR #: 9340280

UPC: 639889830004

Item #: 75230

Available to Order

Availability

Location	Available Qty

EARTH CONTACT FRAME

MFR: 3M Electrical Products

MFR #: 3014

UPC: 054007312673

Item #: 482702

Available to Order

Availability

Location	Available Qty

DYNA-COUPLER 4.5 INCH

MFR: 3M Electrical Products

MFR #: 4001

UPC: 051115260124

Item #: 849144

Available to Order

Availability

Location	Available Qty

DIRECT CONNECT, 5-FOOT TRANSMITTER CABLE, TELEPHONE

MFR: 3M Electrical Products

MFR #: 9012

UPC: 054007312758

Item #: 259243

Available to Order

Availability

Location	Available Qty

6" DYNA-COUPLER W/POUCH & 9011 COUPLER CABLE

MFR: 3M Electrical Products

MFR #: 1196/C

UPC: 051115186035

Item #: 850653

Available to Order

Availability

Location	Available Qty

Verisafe Replacement AVT System Cable, 3

Panduit

VeriSafe 1.0 VS-AVT-CABLE-30 Replacement Cable

MFR: Panduit

MFR #: VS-AVT-CABLE-30

UPC: 613056364721

Item #: 977644

Available to Order

Availability

Location	Available Qty

VeriSafe??? Insulation Piercing Connecti

Panduit

VeriSafe VS-CKP1K4/0-500 AVT Connection Kit for AWG 4/0 to 500 MCM conductors

MFR: Panduit

MFR #: VS-CKP1K4/0-500

UPC: 613056812994

Item #: 1284054

Available to Order

Availability

Location	Available Qty

Amprobe

Contact And Non-Contact Tachometer, Range: Surface Speed (Contact): 0.1 - 1999 M MINT, 0.4 - 6550 FT MINT, Rpm Range: Rotation (Non-Contact): 1 - 99999 RPM: Rotation (Contact): 19 - 19999 RPM, Accuracy: Plus- Minus (0.02 PCT V Reading Plus- Minus1 Digit), Working Distance: 600 MM Maximum (Optical), Parts Included: 6 Adapters, Carrying Case, Reflective Tapes, Batteries And User Manual, Measuring Units: M, FT, IN, Dimensions: 175 MM Length X 60 MM Width X 28 MM Height, Battery: (2) AA1.5 V LR6 (Alakaline) Or Rechargeable, Operating Temperature: 0 - 50 DEG C, CE Certified

MFR: Fluke

MFR #: TACH20

UPC: 095969463881

Item #: 325700

Available to Order

Availability

Location	Available Qty

Amprobe

Contact And Non-Contact Tachometer, Range: Surface Speed (Contact): 1 - 9999.9 M/MINT, 3 - 30,000 FT-MINT, 1 - 10,000 YD-MINT, Resolution: RPM Unit: 0.001,0.01,0.1,1, M-MINT Unit: 0.0001,0.001,0.01,0.1, Ft-MINT Unit: 0.0001, 0.001, 0.01, 0.1: YD-MINT Unit: 0.0001, 0.001, 0.01, 0.1, Rpm Range: Rotation (Non-Contact): 10 - 99999 RPM Rotation (Contact): 10 - 19999 RPM, Accuracy: Plus- Minus (0.1 PCT Of RDG + 2 Digit), Display: LCD With 15 MM Height X 33 MM Width, Working Distance: 5 - 30 CM (Non Contact), Parts Included: Meter, 9 V Battery, Cone And Funnel Contact Tips, Reflective Tape And Users Manual, Measuring Units: M, FT, YD, Dimensions: 266.6 MM Length X 177.8 MM Width X 81.28 MM Height, Battery: 9 V, Power Consumption: 5 MICAMP (Idle), 18 MILAMP (Measurement), Operating Temperature: 0 - 50 DEG C, CE Certified

MFR: Fluke

MFR #: TACH-10

UPC: 095969556699

Item #: 774607

Available to Order

Availability

Location	Available Qty

Amprobe

Specifically designed for electrical, HVAC, mechanical, automotive applications with a temperature measurement range of 14 F to 932 F (-10 C to 500 C). Portable, ergonomic, and easy to operate, allows for quick and accurate identification of temperature related issues for electrical connections and motors, HVAC functionality and performance, and heat loss spots on the insulation around buildings to save energy costs.

MFR: Fluke

MFR #: IRC-110

UPC: 095969853835

Item #: 788040

Available to Order

Availability

Location	Available Qty

Amprobe

This Anemometer with Flexible Precision Vane is ideal for HVAC technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems. It offers numerous functionsuse it to check air velocity FPM (feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement location flexibility. Switch between C and F. Input the area of airflow measurement to gain accurate air velocity results. Measure an air flow source for a continuous moving average for up to two hours. Determine minimum, maximum and average readings from a single point air source. Large dual display allows views of both air flow and velocity measurements plus temperature. Long extended flexible cord for remote vane access capabilities. All the measurements can be output to a computer for charting or analysis by optional model TM-SWA software and RS232 cable. Shipped in a deluxe hard carry case to protect and transport your Anemometer.

MFR: Fluke

MFR #: TMA10A

UPC: 095969398886

Item #: 421277

Available to Order

Availability

Location	Available Qty

Amprobe

This Amprobe Hot Wire anemometer technology eliminates the use of bearings and rotating parts. Because of this fact the meter is durable and provides good and stable accuracy of the measurements. Used for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems.

MFR: Fluke

MFR #: TMA-21HW

UPC: 095969556910

Item #: 333274

Available to Order

Availability

Location	Available Qty

Amprobe

This Amprobe Mini Vane Anemometer is a compact, pocket-sized tool for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems.

MFR: Fluke

MFR #: TMA5

UPC: 095969516150

Item #: 129392

Available to Order

Availability

Location	Available Qty

Amprobe

Use with all models of clamp meters. It enables the user of a clamp meter to measure the current on a 2-wire or 3-wire power cord to 15A without having to cut off the plug and separate the conductors, or opening electrical boxes on 120V lines. Includes a 10X current multiplier loop for increased sensitivity and accuracy of low-current measurements.

MFR: Fluke

MFR #: ELS2A

UPC: 095969414852

Item #: 172992

Available to Order

Availability

Location	Available Qty

Amprobe

This rugged and reliable clamp meter is designed for professional electrician and technician that need a fast responding, feature packed, go-to clamp meter. This meter offers a complete range of measuring functions for both HVAC and electrical applications. This modern Clamp Meter features a large low-light backlit LCD dual display for dimly lit areas and is capable of simultaneously displaying voltage and amperage to perform voltage drop tests. This meter offers TRMS, low pass filter, in-rush current, frequency, resistance, capacitance, temperature, DC micro-Amps, Amp-tip and non-contact voltage detection.

MFR: Fluke

MFR #: ACD-14-PRO

UPC: 095969806275

Item #: 557457

Available to Order

Availability

Location	Available Qty

Amprobe

This Amprobe Heavy Duty Multimeter is designed for professional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use applications. It's made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts. Built of tough, fire-retardant thermoplastic resistant to grease and chemical spills, with all sensitive components shock-mounted for a drop resistant to at least eight feet. This meter has an extended voltage measurement capability of 1500V DC and 1000V AC, unmatched by any other line of digital multimeters. The extended voltage ranges can withstand transients up to 12 kV.

MFR: Fluke

MFR #: HD110C

UPC: 095969353250

Item #: 380968

Available to Order

Availability

Location	Available Qty

Amprobe

The ultimate electronic component verifier measures inductance, capacitance, resistance, transistors, diodes and microwave diodes.

MFR: Fluke

MFR #: LCR55A

UPC: 095969414753

Item #: 588394

Available to Order

Availability

Location	Available Qty

Amprobe

HVAC Digital Multimeter, Voltage Rating: AC: 40 MILV, 4 V, 40 V, 400 V,600 V - DC: 400 MILV, 4 V, 40 V, 400 V, 600 V, Amperage Rating: 400 MICAMP, 4000 MICAMP, 40 MILAMP, 400 MILAMP, 4 AMP, 10 AMP, Frequency Rating: 10 HZ - 10 MHZ, Resistance: 400 OHM, 4 KOHM, 40 KOHM, 400 KOHM, 4 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, 4000 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.8 PCT RDG + 1LSD )For DC Voltage, Plus-Minus (1.2PCT RDG + 3LSD) For DC Current Plus-Minus (1.2 PCT RDG + 3LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 4000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 600 V, N10140, For HVAC Professional

MFR: Fluke

MFR #: AM-520

UPC: 095969600385

Item #: 454451

Available to Order

Availability

Location	Available Qty

Amprobe

Pen Probe Digital Multimeter With Built-In Test Probe, Voltage Rating: AC DC: 3.4 V, 34 V, 340 V, 600 V, Resistance: 340 OHM, 3.4 KOHM, 34 KOHM, 340 KOHM, 3.4 MOHM, 34 MOHM, Accuracy: Plus-Minus (0.5PCT RDG + 2 DGT)For DC Voltage, Plus-Minus (1.5PCT RDG + 8 DGT)For AC Voltage, Plus-Minus (1PCT RDG + 4 DGT)For Resistance, Display: 3-3-4 Digit LCD, 3400 Count, Temperature Rating: 0 - 40 DEG C, Peak Hold: No, Diode Test: Yes, Dimensions: 7.8 IN Length X 1.1 IN Width X 1.4 IN Height, CE Certified, UL 3111-1 Listed, Cat III 300 V Safety Rated, Cat II 600 V Safety Rated, For professional Use

MFR: Fluke

MFR #: DM73C

UPC: 095969365321

Item #: 620621

Available to Order

Availability

Location	Available Qty

Amprobe

Heavy Duty True-Rms Multimeter With Temperature, Voltage Rating: AC: 1000 MILV, 10 V, 100 V, 1500 V, DC:1000 MILV, 10 V, 100 V, 1000 V, Amperage Rating: 100 MICA, 1000 MICA, 10 MILA, 100 MILA, 400 MILA, 2 AMP, Frequency Rating: 100 HZ, 1000 HZ, 10 KHZ, 100 KHZ, 1000 KHZ, 10 M HZ, Resistance: 1000 OHM, 10 KOHM, 100 KOHM, 1000 KOHM, 10 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, Accuracy: Plus-Minus(0.1 PCT RDG + 5 DGT)For DC Voltage, Plus-Minus (1.2 PCT RDG + 10 DGT)For AC Voltage , Plus-Minus (0.5PCT RDG + 10 DGTS)For DC Current, Plus-Minus (1.5 PCT + 10 DGTS)For AC Current, Plus-Minus (0.5 PCT RDG + 8 DGTS)For Resistance, Plus-Minus(3 PCT RDG +10 DGTS)For Capacitance, Plus-Minus(2 PCT RDG + 4 DEGC)For Temperature, Display: 4 digit LCD, 9999 Counts, With Annunciators, Menu Features And 41 Segment Bargraph, Temperature Rating: -20 To 1300 DEG C, Battery: Standard 9 V, NEDA 1604, JIS 006P, IEC 6F22, Peak Hold: No, Diode Test: Yes, Enclosure: IP67, Dimensions: 200 MM Length X 102MM Width X 59 MM Height, CE,CSA Certified, CAT IV 1000 V rated, For professional Use In Harsh Environments

MFR: Fluke

MFR #: HD160C

UPC: 095969353267

Item #: 607902

Available to Order

Availability

Location	Available Qty

Amprobe

This high-current clamp doubles as a multimeter for AC and DC voltage, resistance and continuity.

MFR: Fluke

MFR #: ACD-6-PRO

UPC: 095969365888

Item #: 31281

Available to Order

Availability

Location	Available Qty

Amprobe

Diagnose potential failure with this milliohm meter, portable battery powered milliohm meter. Quickly check windings opens or shorts in motors, generators and transformers, wire-to-wire connection resistances, heating elements testing and contact resistance in critical electrical connections.

MFR: Fluke

MFR #: MO-100

UPC: 095969499194

Item #: 420416

Available to Order

Availability

Location	Available Qty

Amprobe

This Amprobe Digital Clamp Multimeter is the perfect choice for HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance, frequency and true-rms accuracy. This digital clamp multimeter provides added functionality with a dual display for views of amperage and voltage simultaneously.

MFR: Fluke

MFR #: ACD-14-TRMS-PLUS

UPC: 095969436090

Item #: 142294

Available to Order

Availability

Location	Available Qty

ACD-14 PLUS,DUAL DISPL DIGIT CLAMP-ON MM

Amprobe

This clamp meter works as both an HVAC multimeter and electrical multimeter with a versatile set of features, including microamps, capacitance, frequency and temperature with included thermocouple.

MFR: Fluke

MFR #: ACD-14-PLUS

UPC: 095969436083

Item #: 773424

Available to Order

Availability

Location	Available Qty

Amprobe

Relative Humidity Temperature Meter, Included: Carrying Case, Sensor Cover, Battery (Installed), Users Manual, Display: Dual Display, Minimum/Maximum Memory: Yes, Auto Power Off: Yes, Response Time: Humidity: 180 S, Temperature: 10 S, Dew Point Range: -20 To 60 DEG C At Plus/Minus0.8 DEG C Accuracy, Temperature Accuracy: Plus/Minus 0.8 DEG C, Wet Bulb Temperature Range: -20 To 60 DEG C At Plus/Minus0.8 DEG C Accuracy, Humidity Accuracy: Plus/Minus 3 PCT RH At 23 DEG C, Relative Humidity Range: Less Than 70 PCT, Temperature Range: 0 - 40 DEG C, Dimensions: 240 MM Length X 54 MM Width X 34 MM Height, Battery: 9 V, NEDA 1604 Or JIS 006P Or IEC6F22, Dry Bulb Temperature Range: -20 To 60 DEG C, Resolution: 0.1 PCT RH, CE Certified

MFR: Fluke

MFR #: THWD-3

UPC: 095969416726

Item #: 103175

Available to Order

Availability

Location	Available Qty

Amprobe

Industrial Digital Multimeter With True-Rms, Voltage Rating: AC: 6 V, 60 V, 600 V, 1000 V DC: 600 MILV, 6 V, 60 V, 600 V, 1000 V, Amperage Rating: 600 MICAMP, 6000 MICAMP, 60 MILAMP, 500 MILAMP, 10 AMP, Frequency Rating: 60 HZ, 600 HZ,6 KHZ, 60 KHZ, 600 KHZ,6 MHZ, 60 MHZ, Resistance: 600 OHM, 6 KOHM, 60 KOHM, 600 KOHM, 6 MOHM, 60 MOHM, Capacitance: 60 NFD, 600 NFD, 6 MFD, 60 MFD, 600 MFD, 6000 MFD,60 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.5 PCT RDG + 2LSD )For DC Voltage, Plus-Minus (1PCT RDG + 2LSD) For DC Current Plus-Minus (1.2 PCT RDG + 5LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 6000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 1000 V CAT III 600 V, N10140, For Professional Electricians Use

MFR: Fluke

MFR #: AM-570

UPC: 095969640862

Item #: 436228

Available to Order

Availability

Location	Available Qty

Amprobe

If youre looking for a versatile clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments, this Clamp Meter is the best clamp meter for the job. It is the best clamp meter in the AMP-300 Series line including all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC DC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, and continuity.

MFR: Fluke

MFR #: AMP-330

UPC: 095969770897

Item #: 436231

Available to Order

Availability

Location	Available Qty

Amprobe

AM-210 True-RMS AC Clamp Meter, 600 Amp

MFR: Fluke

MFR #: AMP-210

UPC: 095969770859

Item #: 557480

Available to Order

Availability

Location	Available Qty

Amprobe

Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC-DC current, AC- DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.

MFR: Fluke

MFR #: AMP-320

UPC: 095969770880

Item #: 446855

Available to Order

Availability

Location	Available Qty

Amprobe

Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.

MFR: Fluke

MFR #: AMP-310

UPC: 095969770873

Item #: 639925

Available to Order

Availability

Location	Available Qty

Amprobe

The Amprobe UAT-505 Underground Utility Locator Kit is the rugged solution for locating underground energized and de-energized wires, cables and pipes. It features fast sound and meter response and depth measurements to 20 feet.

MFR: Fluke

MFR #: UAT-505

UPC: 195112014967

Item #: 1278518

Available to Order

Availability

Location	Available Qty

Amprobe

Manage all your underground locating needs with the feature-packed UAT-600 Series, designed to accurately pinpoint underground utilities and buried services up to 20 feet deep. Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications. The CAT IV 600 V rating ensures safety when working with energized cables. The locating kit comes complete and ready for use. Includes a signal clamp accessory in addition to the main components.

MFR: Fluke

MFR #: UAT-620

UPC: 095969873727

Item #: 992740

Available to Order

Availability

Location	Available Qty

Amprobe

This Amprobe Electrical Test Kit offers three electrical testers with testing functions suitable for a variety of residential applications. The kit includes the AM-420 Digital Multimeter, ST-102B Socket Tester with GFCI and VP-1000 Non-Contact Voltage Detector. From identifying voltage presence in outlets and switches to confirming proper wiring of GFCI breakers, this kit boasts all the features needed to perform quick and safe voltage tests.

MFR: Fluke

MFR #: PK-110

UPC: 095969690805

Item #: 557486

Available to Order

Availability

Location	Available Qty

Amprobe

Test Lead, Included: Shrouded 90 DEG Banana Plugs, One Red And One Black Leads And Clips, CE Certified

MFR: Fluke

MFR #: TL35B

UPC: 095969425124

Item #: 20486

Available to Order

Availability

Location	Available Qty

Amprobe

Instant feedback with CO2 levels, with additional temperature and humidity measurement. Built-in alarm warns against dangerous CO2 levels. This portable Air Quality meter is designed to measure air quality compliance in occupied spaces such as offices, production floors, schools or hospitals.

MFR: Fluke

MFR #: CO2-100

UPC: 095969499330

Item #: 227320

Available to Order

Availability

Location	Available Qty

EARTH CONTACT FRAME CABLE

MFR: 3M Electrical Products

MFR #: 9026

UPC: 054007312840

Item #: 482627

Available to Order

Availability

Location	Available Qty

Amprobe

TIC-410A 48 inch Hot Stick Attachment

MFR: Fluke

MFR #: TIC-410A

UPC: 095969440516

Item #: 137772

Available to Order

Availability

Location	Available Qty

Amprobe

This Amprobe Test Lead Kit includes 48" long silicone lead wires, probe clips, spaced lugs, and fold out carrying case as well as spring loaded crimp tips and a red tip length extender.

MFR: Fluke

MFR #: DL248D

UPC: 095969414647

Item #: 25267

Available to Order

Availability

Location	Available Qty