Testing and Measuring Instruments

Showing 49 - 96 of 109 Items
Filters Clear Filters
expand_less Brand (4)
+ Show 22 More
expand_less Ways to Shop
  • Amprobe
  • Hubbell Wiring Device - Kellems
  • Panduit
  • Pomona
Amprobe
Contact And Non-Contact Tachometer, Range: Surface Speed (Contact): 1 - 9999.9 M/MINT, 3 - 30,000 FT-MINT, 1 - 10,000 YD-MINT, Resolution: RPM Unit: 0.001,0.01,0.1,1, M-MINT Unit: 0.0001,0.001,0.01,0.1, Ft-MINT Unit: 0.0001, 0.001, 0.01, 0.1: YD-MINT Unit: 0.0001, 0.001, 0.01, 0.1, Rpm Range: Rotation (Non-Contact): 10 - 99999 RPM Rotation (Contact): 10 - 19999 RPM, Accuracy: Plus- Minus (0.1 PCT Of RDG + 2 Digit), Display: LCD With 15 MM Height X 33 MM Width, Working Distance: 5 - 30 CM (Non Contact), Parts Included: Meter, 9 V Battery, Cone And Funnel Contact Tips, Reflective Tape And Users Manual, Measuring Units: M, FT, YD, Dimensions: 266.6 MM Length X 177.8 MM Width X 81.28 MM Height, Battery: 9 V, Power Consumption: 5 MICAMP (Idle), 18 MILAMP (Measurement), Operating Temperature: 0 - 50 DEG C, CE Certified
MFR: Fluke
MFR #: TACH-10
UPC: 095969556699
Item #: 774607
Available to Order
$403.10 each
Availability
Location Available Qty
Amprobe
Specifically designed for electrical, HVAC, mechanical, automotive applications with a temperature measurement range of 14 F to 932 F (-10 C to 500 C). Portable, ergonomic, and easy to operate, allows for quick and accurate identification of temperature related issues for electrical connections and motors, HVAC functionality and performance, and heat loss spots on the insulation around buildings to save energy costs.
MFR: Fluke
MFR #: IRC-110
UPC: 095969853835
Item #: 788040
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Amprobe
This Anemometer with Flexible Precision Vane is ideal for HVAC technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems. It offers numerous functionsuse it to check air velocity FPM (feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement location flexibility. Switch between C and F. Input the area of airflow measurement to gain accurate air velocity results. Measure an air flow source for a continuous moving average for up to two hours. Determine minimum, maximum and average readings from a single point air source. Large dual display allows views of both air flow and velocity measurements plus temperature. Long extended flexible cord for remote vane access capabilities. All the measurements can be output to a computer for charting or analysis by optional model TM-SWA software and RS232 cable. Shipped in a deluxe hard carry case to protect and transport your Anemometer.
MFR: Fluke
MFR #: TMA10A
UPC: 095969398886
Item #: 421277
Available to Order
$689.79 each
Availability
Location Available Qty
Amprobe
This Amprobe Hot Wire anemometer technology eliminates the use of bearings and rotating parts. Because of this fact the meter is durable and provides good and stable accuracy of the measurements. Used for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems.
MFR: Fluke
MFR #: TMA-21HW
UPC: 095969556910
Item #: 333274
Available to Order
$983.76 each
Availability
Location Available Qty
Amprobe
This Amprobe Mini Vane Anemometer is a compact, pocket-sized tool for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems.
MFR: Fluke
MFR #: TMA5
UPC: 095969516150
Item #: 129392
Available to Order
$403.10 each
Availability
Location Available Qty
Pomona
Fluke 417D laser distance (meter only) The ultra-portable, durable and easy-to-use Fluke 417D Measures up to 131 ft. with accuracy of 2mm (0.08 in) Instant distance measurement with one-button operation IP54 dust and water resistant
MFR: Fluke
MFR #: FLUKE-417D
UPC: 095969912860
Item #: 1039770
Available to Order
$244.32 each
Availability
Location Available Qty
Amprobe
Use with all models of clamp meters. It enables the user of a clamp meter to measure the current on a 2-wire or 3-wire power cord to 15A without having to cut off the plug and separate the conductors, or opening electrical boxes on 120V lines. Includes a 10X current multiplier loop for increased sensitivity and accuracy of low-current measurements.
MFR: Fluke
MFR #: ELS2A
UPC: 095969414852
Item #: 172992
Available to Order
$40.52 each
Availability
Location Available Qty
Amprobe
This rugged and reliable clamp meter is designed for professional electrician and technician that need a fast responding, feature packed, go-to clamp meter. This meter offers a complete range of measuring functions for both HVAC and electrical applications. This modern Clamp Meter features a large low-light backlit LCD dual display for dimly lit areas and is capable of simultaneously displaying voltage and amperage to perform voltage drop tests. This meter offers TRMS, low pass filter, in-rush current, frequency, resistance, capacitance, temperature, DC micro-Amps, Amp-tip and non-contact voltage detection.
MFR: Fluke
MFR #: ACD-14-PRO
UPC: 095969806275
Item #: 557457
Available to Order
$458.40 each
Availability
Location Available Qty
Amprobe
This Amprobe Heavy Duty Multimeter is designed for professional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use applications. It's made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts. Built of tough, fire-retardant thermoplastic resistant to grease and chemical spills, with all sensitive components shock-mounted for a drop resistant to at least eight feet. This meter has an extended voltage measurement capability of 1500V DC and 1000V AC, unmatched by any other line of digital multimeters. The extended voltage ranges can withstand transients up to 12 kV.
MFR: Fluke
MFR #: HD110C
UPC: 095969353250
Item #: 380968
Available to Order
$522.43 each
Availability
Location Available Qty
Amprobe
The ultimate electronic component verifier measures inductance, capacitance, resistance, transistors, diodes and microwave diodes.
MFR: Fluke
MFR #: LCR55A
UPC: 095969414753
Item #: 588394
Available to Order
$640.31 each
Availability
Location Available Qty
Amprobe
HVAC Digital Multimeter, Voltage Rating: AC: 40 MILV, 4 V, 40 V, 400 V,600 V - DC: 400 MILV, 4 V, 40 V, 400 V, 600 V, Amperage Rating: 400 MICAMP, 4000 MICAMP, 40 MILAMP, 400 MILAMP, 4 AMP, 10 AMP, Frequency Rating: 10 HZ - 10 MHZ, Resistance: 400 OHM, 4 KOHM, 40 KOHM, 400 KOHM, 4 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, 4000 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.8 PCT RDG + 1LSD )For DC Voltage, Plus-Minus (1.2PCT RDG + 3LSD) For DC Current Plus-Minus (1.2 PCT RDG + 3LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 4000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 600 V, N10140, For HVAC Professional
MFR: Fluke
MFR #: AM-520
UPC: 095969600385
Item #: 454451
Available to Order
$142.60 each
Availability
Location Available Qty
Amprobe
Pen Probe Digital Multimeter With Built-In Test Probe, Voltage Rating: AC DC: 3.4 V, 34 V, 340 V, 600 V, Resistance: 340 OHM, 3.4 KOHM, 34 KOHM, 340 KOHM, 3.4 MOHM, 34 MOHM, Accuracy: Plus-Minus (0.5PCT RDG + 2 DGT)For DC Voltage, Plus-Minus (1.5PCT RDG + 8 DGT)For AC Voltage, Plus-Minus (1PCT RDG + 4 DGT)For Resistance, Display: 3-3-4 Digit LCD, 3400 Count, Temperature Rating: 0 - 40 DEG C, Peak Hold: No, Diode Test: Yes, Dimensions: 7.8 IN Length X 1.1 IN Width X 1.4 IN Height, CE Certified, UL 3111-1 Listed, Cat III 300 V Safety Rated, Cat II 600 V Safety Rated, For professional Use
MFR: Fluke
MFR #: DM73C
UPC: 095969365321
Item #: 620621
Available to Order
$192.08 each
Availability
Location Available Qty
Amprobe
Heavy Duty True-Rms Multimeter With Temperature, Voltage Rating: AC: 1000 MILV, 10 V, 100 V, 1500 V, DC:1000 MILV, 10 V, 100 V, 1000 V, Amperage Rating: 100 MICA, 1000 MICA, 10 MILA, 100 MILA, 400 MILA, 2 AMP, Frequency Rating: 100 HZ, 1000 HZ, 10 KHZ, 100 KHZ, 1000 KHZ, 10 M HZ, Resistance: 1000 OHM, 10 KOHM, 100 KOHM, 1000 KOHM, 10 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, Accuracy: Plus-Minus(0.1 PCT RDG + 5 DGT)For DC Voltage, Plus-Minus (1.2 PCT RDG + 10 DGT)For AC Voltage , Plus-Minus (0.5PCT RDG + 10 DGTS)For DC Current, Plus-Minus (1.5 PCT + 10 DGTS)For AC Current, Plus-Minus (0.5 PCT RDG + 8 DGTS)For Resistance, Plus-Minus(3 PCT RDG +10 DGTS)For Capacitance, Plus-Minus(2 PCT RDG + 4 DEGC)For Temperature, Display: 4 digit LCD, 9999 Counts, With Annunciators, Menu Features And 41 Segment Bargraph, Temperature Rating: -20 To 1300 DEG C, Battery: Standard 9 V, NEDA 1604, JIS 006P, IEC 6F22, Peak Hold: No, Diode Test: Yes, Enclosure: IP67, Dimensions: 200 MM Length X 102MM Width X 59 MM Height, CE,CSA Certified, CAT IV 1000 V rated, For professional Use In Harsh Environments
MFR: Fluke
MFR #: HD160C
UPC: 095969353267
Item #: 607902
Available to Order
$851.33 each
Availability
Location Available Qty
Amprobe
This high-current clamp doubles as a multimeter for AC and DC voltage, resistance and continuity.
MFR: Fluke
MFR #: ACD-6-PRO
UPC: 095969365888
Item #: 31281
Available to Order
$243.01 each
Availability
Location Available Qty
Amprobe
Diagnose potential failure with this milliohm meter, portable battery powered milliohm meter. Quickly check windings opens or shorts in motors, generators and transformers, wire-to-wire connection resistances, heating elements testing and contact resistance in critical electrical connections.
MFR: Fluke
MFR #: MO-100
UPC: 095969499194
Item #: 420416
Available to Order
$2223.68 each
Availability
Location Available Qty
Amprobe
This Amprobe Digital Clamp Multimeter is the perfect choice for HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance, frequency and true-rms accuracy. This digital clamp multimeter provides added functionality with a dual display for views of amperage and voltage simultaneously.
MFR: Fluke
MFR #: ACD-14-TRMS-PLUS
UPC: 095969436090
Item #: 142294
Available to Order
$497.69 each
Availability
Location Available Qty
Amprobe
This clamp meter works as both an HVAC multimeter and electrical multimeter with a versatile set of features, including microamps, capacitance, frequency and temperature with included thermocouple.
MFR: Fluke
MFR #: ACD-14-PLUS
UPC: 095969436083
Item #: 773424
Available to Order
$410.37 each
Availability
Location Available Qty
Amprobe
Relative Humidity Temperature Meter, Included: Carrying Case, Sensor Cover, Battery (Installed), Users Manual, Display: Dual Display, Minimum/Maximum Memory: Yes, Auto Power Off: Yes, Response Time: Humidity: 180 S, Temperature: 10 S, Dew Point Range: -20 To 60 DEG C At Plus/Minus0.8 DEG C Accuracy, Temperature Accuracy: Plus/Minus 0.8 DEG C, Wet Bulb Temperature Range: -20 To 60 DEG C At Plus/Minus0.8 DEG C Accuracy, Humidity Accuracy: Plus/Minus 3 PCT RH At 23 DEG C, Relative Humidity Range: Less Than 70 PCT, Temperature Range: 0 - 40 DEG C, Dimensions: 240 MM Length X 54 MM Width X 34 MM Height, Battery: 9 V, NEDA 1604 Or JIS 006P Or IEC6F22, Dry Bulb Temperature Range: -20 To 60 DEG C, Resolution: 0.1 PCT RH, CE Certified
MFR: Fluke
MFR #: THWD-3
UPC: 095969416726
Item #: 103175
Available to Order
$401.64 each
Availability
Location Available Qty
Amprobe
Industrial Digital Multimeter With True-Rms, Voltage Rating: AC: 6 V, 60 V, 600 V, 1000 V DC: 600 MILV, 6 V, 60 V, 600 V, 1000 V, Amperage Rating: 600 MICAMP, 6000 MICAMP, 60 MILAMP, 500 MILAMP, 10 AMP, Frequency Rating: 60 HZ, 600 HZ,6 KHZ, 60 KHZ, 600 KHZ,6 MHZ, 60 MHZ, Resistance: 600 OHM, 6 KOHM, 60 KOHM, 600 KOHM, 6 MOHM, 60 MOHM, Capacitance: 60 NFD, 600 NFD, 6 MFD, 60 MFD, 600 MFD, 6000 MFD,60 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.5 PCT RDG + 2LSD )For DC Voltage, Plus-Minus (1PCT RDG + 2LSD) For DC Current Plus-Minus (1.2 PCT RDG + 5LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 6000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 1000 V CAT III 600 V, N10140, For Professional Electricians Use
MFR: Fluke
MFR #: AM-570
UPC: 095969640862
Item #: 436228
Available to Order
$419.11 each
Availability
Location Available Qty
Amprobe
If youre looking for a versatile clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments, this Clamp Meter is the best clamp meter for the job. It is the best clamp meter in the AMP-300 Series line including all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC DC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, and continuity.
MFR: Fluke
MFR #: AMP-330
UPC: 095969770897
Item #: 436231
Available to Order
$614.12 each
Availability
Location Available Qty
Amprobe
AM-210 True-RMS AC Clamp Meter, 600 Amp
MFR: Fluke
MFR #: AMP-210
UPC: 095969770859
Item #: 557480
Available to Order
$366.72 each
Availability
Location Available Qty
Amprobe
Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC-DC current, AC- DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.
MFR: Fluke
MFR #: AMP-320
UPC: 095969770880
Item #: 446855
Available to Order
$523.89 each
Availability
Location Available Qty
Amprobe
AM-220 True-RMS AC/DC Clamp Meter, 600 Amp
MFR: Fluke
MFR #: AMP-220
UPC: 095969770866
Item #: 385200
Available to Order
$381.27 each
Availability
Location Available Qty
Amprobe
Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.
MFR: Fluke
MFR #: AMP-310
UPC: 095969770873
Item #: 639925
Available to Order
$435.11 each
Availability
Location Available Qty
Amprobe
The Amprobe UAT-505 Underground Utility Locator Kit is the rugged solution for locating underground energized and de-energized wires, cables and pipes. It features fast sound and meter response and depth measurements to 20 feet.
MFR: Fluke
MFR #: UAT-505
UPC: 195112014967
Item #: 1278518
Available to Order
$7940.10 each
Availability
Location Available Qty
Amprobe
Manage all your underground locating needs with the feature-packed UAT-600 Series, designed to accurately pinpoint underground utilities and buried services up to 20 feet deep. Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications. The CAT IV 600 V rating ensures safety when working with energized cables. The locating kit comes complete and ready for use. Includes a signal clamp accessory in addition to the main components.
MFR: Fluke
MFR #: UAT-620
UPC: 095969873727
Item #: 992740
Available to Order
$10457.78 each
Availability
Location Available Qty
Amprobe
If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.
MFR: Fluke
MFR #: PRM-6
UPC: 095969680288
Item #: 392321
Available to Order
$385.63 each
Availability
Location Available Qty
Amprobe
This Amprobe Electrical Test Kit offers three electrical testers with testing functions suitable for a variety of residential applications. The kit includes the AM-420 Digital Multimeter, ST-102B Socket Tester with GFCI and VP-1000 Non-Contact Voltage Detector. From identifying voltage presence in outlets and switches to confirming proper wiring of GFCI breakers, this kit boasts all the features needed to perform quick and safe voltage tests.
MFR: Fluke
MFR #: PK-110
UPC: 095969690805
Item #: 557486
Available to Order
$96.03 each
Availability
Location Available Qty
Amprobe
Test Lead, Included: Shrouded 90 DEG Banana Plugs, One Red And One Black Leads And Clips, CE Certified
MFR: Fluke
MFR #: TL35B
UPC: 095969425124
Item #: 20486
Available to Order
$58.19 each
Availability
Location Available Qty
Amprobe
Instant feedback with CO2 levels, with additional temperature and humidity measurement. Built-in alarm warns against dangerous CO2 levels. This portable Air Quality meter is designed to measure air quality compliance in occupied spaces such as offices, production floors, schools or hospitals.
MFR: Fluke
MFR #: CO2-100
UPC: 095969499330
Item #: 227320
Available to Order
$893.53 each
Availability
Location Available Qty
Amprobe
TIC-410A 48 inch Hot Stick Attachment
MFR: Fluke
MFR #: TIC-410A
UPC: 095969440516
Item #: 137772
Available to Order
$426.38 each
Availability
Location Available Qty
Amprobe
This Amprobe Test Lead Kit includes 48" long silicone lead wires, probe clips, spaced lugs, and fold out carrying case as well as spring loaded crimp tips and a red tip length extender.
MFR: Fluke
MFR #: DL248D
UPC: 095969414647
Item #: 25267
Available to Order
$186.26 each
Availability
Location Available Qty
Discontinued
Amprobe
AT-6000-R Advanced Wire Tracer Kit
MFR: Fluke
MFR #: AT-6000-R
UPC: 095969853859
Item #: 1391255
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Amprobe
A-Frame Ground Fault Locator is an optional accessory for Amprobe UAT-600 Series. It works in conjunction with the UAT-600-T Transmitter to locate cable and wire ground faults, sheath faults, or pipeline coating defects. Its advanced technology and digital signal processing makes pinpointing process fast, accurate and unambiguous.
MFR: Fluke
MFR #: AF-600
UPC: 095969873734
Item #: 1110949
Available to Order
$4901.43 each
Availability
Location Available Qty
Discontinued
Amprobe
Manage all your underground locating needs with the feature-packed UAT-600 Series, designed to accurately pinpoint underground utilities and buried services up to 20 feet deep. Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications. The CAT IV 600 V rating ensures safety when working with energized cables. The locating kit comes complete and ready for use.
MFR: Fluke
MFR #: UAT-610
UPC: 095969873710
Item #: 1145045
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
Digital Insulation Resistance Tester, Resistance Range: 0 - 9999 OHM, Accuracy: 1 PCT RDG Plus/Minus 2 LSD For Resistance, Resolution: 40 MOHM : 10 KOHM, 400 MOHM : 100 KOHM, 4000 MOHM : 10 MOHM, Display: 3-3/4 Digital Readout With Analog Bar Indication, Operating Temperature: 0 - 50 DEG C, Dimensions: 235 MM Length X 116 MM Width X 54 MM Height, CE Certified, CAT III 600 V, IEC61010-1 And IEC61557, N101401, For Most Insulation Test Applications Including Wires, Cables, Transformers, And Motors
MFR: Fluke
MFR #: AMB-25
UPC: 095969366090
Item #: 79014
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
Circuit Breaker Tracer, Voltage Rating: 9 - 120 V, Battery: 9 V Alkaline For Receiver, Frequency Rating: 50 - 60 HZ, UL Listed, CAT II 120 V, For Indoor use, Altitudes up to 2000 m, 2 DEG Pollution
MFR: Fluke
MFR #: BT-120
UPC: 095969498869
Item #: 535461
Available to Order
$97.48 each
Availability
Location Available Qty
Discontinued
Amprobe
This Amprobe Dual Temperature Portable Thermometer is a completely portable dual input thermometer. With a digital dual display that displays T1, T2 and T1-T2. Choose between Celsius or Fahrenheit degree measurement results. This thermometer will store and later display your minimum and maximum values. This meter measures temperature with either K-type or J-type thermocouples.
MFR: Fluke
MFR #: TMD-10
UPC: 095969419338
Item #: 811310
Available to Order
$371.08 each
Availability
Location Available Qty
Discontinued
Amprobe
This Amprobe thermometer, a 10:1 spot to distance ratio infrared thermometer, offers best in class accuracy and response time with a temperature measurement range of 0F to 716F or -18C to 380C. This is specifically designed for HVAC, electrical, industrial maintenance, automotive as well as quality control and fire prevention applications.
MFR: Fluke
MFR #: IR-710
UPC: 095969614313
Item #: 8708
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
This Amprobe thermometer, a precision performance 50:1 spot to distance ratio infrared thermometer, offers unparalleled accuracy and response time with a temperature measurement range of -58F to 2822F or -50C to 1550C. This is perfect for demanding quality and process control applications with extremely high accuracy and distance to spot. This thermometer also features 99 data points recognition, thermocouple inputs, and USB download for advanced HVAC, electrical, industrial maintenance, automotive as well as quality control and fire prevention applications.
MFR: Fluke
MFR #: IR-750
UPC: 095969614351
Item #: 201172
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
Amprobe's new swivel clamp meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC DC currents, voltage, resistance and capacitance as well as cat III 600 V safety ratings make this clamp on meter something you should swivel to see.
MFR: Fluke
MFR #: ACD-20SW
UPC: 095969498821
Item #: 4556
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
This CAT IV rated ACD-3300IND Clamp On Tester is ideal for industrial applications and utilities that require an extra level of safety. Including true-rms sensing for accuracy, this clamp on meter's extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple.
MFR: Fluke
MFR #: ACD-3300-IND
UPC: 095969492676
Item #: 411690
Available to Order
$733.45 each
Availability
Location Available Qty
Discontinued
Amprobe
The Amprobe ACD-40 provides a simple and effective way to verify if the electrical system is affected by harmonics. Add on troubleshooting capabilities with the ACD-40PQ data-logging feature or get complete power analysis with the ACD-41PQ. Increase measuring efficiency with an optional PC interface kit.
MFR: Fluke
MFR #: ACD-41PQ
UPC: 095969365864
Item #: 230920
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
This Amprobe wiring inspector is a rugged circuit tester designed to test whether a buildings wiring is in compliance with electrical code in seconds, especially voltage drop under load. Without scrolling or switching screens, you can quickly identify issues with splices, connections and conductor quality, crucial to safety and performance of the electrical system. The flashing screen on this circuit tester will clearly indicate incorrect wiring or failures and it wont trip circuit breakers or blow fuses during the test.
MFR: Fluke
MFR #: INSP-3
UPC: 095969516181
Item #: 153410
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
Keep productivity high and operational costs low, with the Amprobe Underground Cable Locator. It is the rugged, economical solution for locating cable, wires and pipes that are underground if they are energized or de-energized. Great for parking lot and airport lighting applications, it precisely pinpoints buried services, with exceptionally fast sound and meter response. The backlit, multiple-segment, bar graph, digital display, plus audible indicators easily locate cables and wires. This Underground Cable Locator employs the proven 33 kHz frequency for most locating applications. To avoid lines at utility construction sites, it also offers the highly sensitive power and radio modes. Take depth measurements with the simple press of a button.
MFR: Fluke
MFR #: AT-3500
UPC: 095969492836
Item #: 11687
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
Signal Clamp, Dimensions: 4 IN Diameter, For AT-3500 Underground Cable Locator
MFR: Fluke
MFR #: SC-3500
UPC: 095969492843
Item #: 4653
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
Clamp Meter, Voltage Rating: 400 MILV, 4 V, 40 V, 400 V, 600 V VAC/VDC, Amperage Rating: AC: 400 AMP, 800 AMP, DC: 400 AMP, 1000 AMP, Frequency Rating: 15HZ - 60HZ At 600 AMP - 800 AMP, Accuracy: Plus-Minus (1.5 PCT RDG + 4 LSD) For DC Current, Plus-Minus (1.5 PCT RDG + 5 LSD) For AC Current, Plus-Minus (1.5 PCT RDG + 4 LSD) For AC Voltage, Plus-Minus (0.5 PCT RDG + 3 LSD) For DC Voltage, Plus-Minus (0.6 PCT RDG + 4 LSD) For Resistance, Plus-Minus (3.5 PCT RDG + 6 LSD) For Capacitance, Display: 3 3-4 Digits 4000 LCD Counts, Operating Temperature: 0 - 40 DEG C, Dimensions: 277 MM Length X 78 MM Width X 40 MM Height, Battery: 1.5 V AAA, Power Consumption: Power Functions: 11 MAMP For AC AMP DC AMP, 2.9 MILAMP For Other Functions, Resistance: 400 OHM, 4 KOHM, 40 KOHM, 400 KOHM, 4 MOHM, 40 MOHM, Capacitance: 500 NFD, 5 MFD, 50 MFD, 500 MFD, 3000 MFD, UL Listed, CE Certified, Meets EN61010-1:2001: IEC61010-2-032(2002), EN61010-2-032(2002), UL61010B-2-032(2003) CAT III 600 V AC And DC Meets EN61326-1
MFR: Fluke
MFR #: ACDC-100-TRMS
UPC: 095969370011
Item #: 133554
Available to Order
$502.06 each
Availability
Location Available Qty
Discontinued
Amprobe
This Amprobe Digital Multimeter provides superior features and accuracy in a smaller form factor. This Digital Multimeter has unique features such as VolTect non-contact voltage detection and our exclusive Magne-Grip holster that frees both hands for work. This is the perfect choice for residential, commercial and general troubleshooting applications.
MFR: Fluke
MFR #: 5XP-A
UPC: 095969365444
Item #: 86138
Available to Order
$202.27 each
Availability
Location Available Qty