Power Tool Attachments

Showing 433 - 455 of 455 Items
Filters Clear Filters
expand_less Brand (2)
+ Show 12 More
expand_less Ways to Shop
  • Greenlee
  • ILSCO
Greenlee
CrImping Die 12 Ton U-Style Die Burndy equivalent U-238. Dies are use with service entrance connectors, C-Taps, H-Taps, overhead and underground connectors.
MFR: Greenlee
MFR #: KD12-35
UPC: 783310102052
Item #: 1085131
Available to Order
$127.34 each
Availability
Location Available Qty
Greenlee
Hex-Al 4/0 Die for crimping color-coded aluminum lugs and splices. Requires UA22 adapter when used with ECCXL, HCCX, & RCCX tools.
MFR: Greenlee
MFR #: KA22-4/0
UPC: 783310067535
Item #: 44096
Available to Order
$129.19 each
Availability
Location Available Qty
Greenlee
Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 24 FT collapses to 50 IN x 2 1/4 IN and uses snap-lock buttons to maintain extended reach capabilities. Install suspension wires for drop ceilings.
MFR: Greenlee
MFR #: FP24
UPC: 783310104438
Item #: 140372
Available to Order
$410.43 each
Availability
Location Available Qty
Greenlee
Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 18 FT collapses to 27 IN x 2 IN and uses friction-locking system. Install suspension wires for drop ceilings.
MFR: Greenlee
MFR #: FP18
UPC: 783310104421
Item #: 49991
Available to Order
$248.83 each
Availability
Location Available Qty
Greenlee
Spade Bit 1-1/2" Hole Diameter. 6-1/4" long with 1/4" hex shank. Bore hardwood, softwood, plywood and drywall. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling.
MFR: Greenlee
MFR #: 33A-1-1/2
UPC: 783310203612
Item #: 138735
Available to Order
$10.66 each
Availability
Location Available Qty
Greenlee
Kwik Cycle Die Set (1,14mm-6mm). 26-10 AWG. For non-insulated and insulated wire ferrules
MFR: Greenlee
MFR #: 3283
UPC: 783310032830
Item #: 47194
Available to Order
$54.56 each
Availability
Location Available Qty
Greenlee
Works with any crimping tool that accepts 12-ton "U" type dies. Less costly than dedicated cutting tools. Simple to install in crimping tools. Requires no adjustments for cutting different materials. Will cleanly cut guy wire (including EHS), grade 60 rebar, ground rod, soft steel bolts up to 5/8 (16 mm) and up to477 kcmil (MCM)(240 mm2) ACSR. U.S. Patent Number 5,775,158
MFR: Greenlee
MFR #: 949
UPC: 783310009498
Item #: 1224563
Available to Order
$538.89 each
Availability
Location Available Qty
Greenlee
DIE SET (50029126)
MFR: Greenlee
MFR #: WB.1471
UPC: 783310029120
Item #: 200686
Available to Order
$218.73 each
Availability
Location Available Qty
Greenlee
4 AWG Copper Die for crimping color-coded aluminum lugs and splices. Requires UA22 adapter when used with ECCXL, HCCX, & RCCX tools.
MFR: Greenlee
MFR #: KC22-4
UPC: 783310030812
Item #: 596708
Available to Order
$128.83 each
Availability
Location Available Qty
Greenlee
Bit Extension, 18" with 5/16" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.
MFR: Greenlee
MFR #: 902-18
UPC: 783310027072
Item #: 122129
Available to Order
$53.33 each
Availability
Location Available Qty
Greenlee
E-Z Bore Self-Feed Bit 1-1/8" (28.6 mm). Double-blade design for fast, smooth cuts. Dual cutting edges can be re-sharpened for longer bit life. Large, open design won't clog with wood chips. Self-feed tip pulls bit through wood. Outer spur teeth reduce splintering and blowouts. Replaceable tip.
MFR: Greenlee
MFR #: 149H2-1-1/8
UPC: 783310012504
Item #: 207840
Available to Order
$50.24 each
Availability
Location Available Qty
Greenlee
HOUSING UNIT (GREEN 12T PISTOL) (52049229)
MFR: Greenlee
MFR #: HB.10018
UPC: 783310101130
Item #: 117634
Available to Order
$58.73 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw Kit for 1/2" - 4" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.
MFR: Greenlee
MFR #: 835
UPC: 783310275381
Item #: 110816
Available to Order
$261.81 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Blade for the 35715 6-7/8" Holesaw.
MFR: Greenlee
MFR #: 35723
UPC: 783310357230
Item #: 103170
Available to Order
$39.71 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 4-1/8" (104.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-4-1/8
UPC: 783310191773
Item #: 13045
Available to Order
$31.76 each
Availability
Location Available Qty
Greenlee
Quick Change Hole Saw Kit. New arbor allows for rapid mounting or removal of hole saws. Faster, easier slug removal. Drill pilot hole without saw. Eliminates the "bite"" when saw crashes into the steel. Provides better ergonomics - reduces stress on wrist, arm and hand. Eliminates obstructed view from hole saw. Only one arbor required from 7/8" to 6" (7/16" shank recommended for hole saws above 2-1/2"). Works with recessed light and carbide grit hole saw products as well. Adapters re-usable to minimize costs. Universal - works with any brand hole saw. Kit contains Bi-metal holesaws for 1/2" - 2" conduit sizes.
MFR: Greenlee
MFR #: 830Q
UPC: 783310028062
Item #: 82272
Available to Order
$250.92 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (47.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1-7/8
UPC: 783310191544
Item #: 103684
Available to Order
$20.47 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2-3/4" (69.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2-3/4
UPC: 783310191650
Item #: 144701
Available to Order
$26.99 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2-1/4" (57.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2-1/4
UPC: 783310191599
Item #: 2948
Available to Order
$25.16 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Steel Toothed 4-3/8" (111mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.
MFR: Greenlee
MFR #: 35712
UPC: 783310357124
Item #: 162634
Available to Order
$87.34 each
Availability
Location Available Qty
Greenlee
PLATE-RETAINING (50385445)
MFR: Greenlee
MFR #: 38544
UPC: 783310385448
Item #: 107786
Available to Order
$27.58 each
Availability
Location Available Qty
Greenlee
Shank Arbor with High-Speed Steel Pilot Drill Bit. 1/4" shank, 1/4" minimum chuck size. Use with 9/16" - 1-3/16" Hole Saws. The best arbor in the industry ensures a solid connection without any gaps or wobbling. Arbors include replaceable, high-speed steel pilot drill. Pilot drills have unique split-point tip design. Use with Greenlee bi-metal hole saws, recessed light holesaws and carbide-grit hole saws (carbide-tipped pilot drill sold separately). Can be used with Greenlee #901 or #904 bit extensions.
MFR: Greenlee
MFR #: 37157
UPC: 783310371571
Item #: 140709
Available to Order
$18.57 each
Availability
Location Available Qty
Greenlee
BEARING (BUNTING #FL102-12) (90548388)
MFR: Greenlee
MFR #: 54838
UPC: 783310548386
Item #: 1244408
Available to Order
$29.35 each
Availability
Location Available Qty