Power Tool Attachments

Showing 49 - 96 of 445 Items

Sort By:

Per Page

expand_less Brand (1)

expand_less Ways to Shop

Made in USA

Nail Eater Extreme 1" hole diameter. Improved cutting edge provides 30percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s. P.O.P packaged.

Greenlee

Nail Eater Extreme 1" hole diameter. Improved cutting edge provides 30percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s. P.O.P packaged.

MFR: Greenlee

MFR #: 62PTS-1

UPC: 783310317982

Item #: 38458

Available to Order

$63.21 each

Availability

Location	Available Qty

Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (22.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (22.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

MFR: Greenlee

MFR #: 825-7/8

UPC: 783310191360

Item #: 164494

Available to Order

$10.81 each

Availability

Location	Available Qty

Nail Eater Extreme 1" (25.4 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.

Greenlee

Nail Eater Extreme 1" (25.4 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.

MFR: Greenlee

MFR #: 66PT-1

UPC: 783310309314

Item #: 165244

In Stock - Check Availability

$72.52 each

Availability

Location	Available Qty

No Image Available

Greenlee

Spade Bit 3/4" Hole Diameter. 6-1/4" long with 1/4" hex shank. Bore hardwood, softwood, plywood and drywall. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling.

MFR: Greenlee

MFR #: 33A-3/4

UPC: 783310203520

Item #: 145508

Available to Order

$6.36 each

Availability

Location	Available Qty

Recessed Light Hole Saw Blade for the 35713 6-3/8" Holesaw.

Greenlee

Recessed Light Hole Saw Blade for the 35713 6-3/8" Holesaw.

MFR: Greenlee

MFR #: 35721

UPC: 783310357216

Item #: 86760

Available to Order

$39.71 each

Availability

Location	Available Qty

Ultra Cutter 2-1/2" (63.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

Greenlee

Ultra Cutter 2-1/2" (63.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

MFR: Greenlee

MFR #: 925-2-1/2

UPC: 783310101628

Item #: 170003

Available to Order

$93.77 each

Availability

Location	Available Qty

645-1-3/4 Quick Change 1-3/4 inch Carbide Tipped Hole Cutter

Greenlee

645-1-3/4 Quick Change 1-3/4 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1-3/4

UPC: 783310057024

Item #: 45931

Available to Order

$85.28 each

Availability

Location	Available Qty

Bi-Metal Hole Saw, Actual Hole Size 1-3/4" (44.4 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-3/4" (44.4 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

MFR: Greenlee

MFR #: 825-1-3/4

UPC: 783310191520

Item #: 170309

Available to Order

$20.47 each

Availability

Location	Available Qty

Combination Drill/Tap Bits. 12-24NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

Greenlee

Combination Drill/Tap Bits. 12-24NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

MFR: Greenlee

MFR #: DTAP12-24

UPC: 783310176152

Item #: 2684

In Stock - Check Availability

$16.60 each

Availability

Location	Available Qty

Ultra Cutter 1-3/4" (44.4 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

Greenlee

Ultra Cutter 1-3/4" (44.4 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

MFR: Greenlee

MFR #: 925-1-3/4

UPC: 783310101604

Item #: 168584

Available to Order

$62.12 each

Availability

Location	Available Qty

Holesaw Pilot Drill Bit 1/4" x 3-1/4". Pilot Drills Have Unique Split-Point Tip Design

Greenlee

Holesaw Pilot Drill Bit 1/4" x 3-1/4". Pilot Drills Have Unique Split-Point Tip Design

MFR: Greenlee

MFR #: 39893

UPC: 783310398936

Item #: 8420

Available to Order

$6.87 each

Availability

Location	Available Qty

Ultra Cutter Kit. Includes 7/8" - 2-1/2" cutters, two small arbors for extended assembly to 7/8" and 1-1/8" cutters, large arbor, hex wrench and case. For conduit sizes 1/2" - 2". Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

Greenlee

Ultra Cutter Kit. Includes 7/8" - 2-1/2" cutters, two small arbors for extended assembly to 7/8" and 1-1/8" cutters, large arbor, hex wrench and case. For conduit sizes 1/2" - 2". Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

MFR: Greenlee

MFR #: 930

UPC: 783310102144

Item #: 173995

Available to Order

$419.07 each

Availability

Location	Available Qty

645-2 Quick Change 2 inch Carbide Tipped Hole Cutter

Greenlee

645-2 Quick Change 2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-2

UPC: 783310057031

Item #: 79203

Available to Order

$106.17 each

Availability

Location	Available Qty

Large Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.

Greenlee

Large Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.

MFR: Greenlee

MFR #: 925-002

UPC: 783310102113

Item #: 173362

Available to Order

$13.09 each

Availability

Location	Available Qty

Cobalt-steel pilot drill with split-point tip to prevent walking. For sizes 2-3/8" - 3". Use with 645-022 Arbor.

Greenlee

Cobalt-steel pilot drill with split-point tip to prevent walking. For sizes 2-3/8" - 3". Use with 645-022 Arbor.

MFR: Greenlee

MFR #: 645-002

UPC: 783310057628

Item #: 146853

Available to Order

$20.54 each

Availability

Location	Available Qty

Quick change arbor allows you to change cutter heads with a simple push and a turn use the same arbor for different size cutting heads.

Greenlee

Quick change arbor allows you to change cutter heads with a simple push and a turn use the same arbor for different size cutting heads.

MFR: Greenlee

MFR #: 645-022

UPC: 783310057536

Item #: 145681

Available to Order

$83.01 each

Availability

Location	Available Qty

Bi-Metal Hole Saw Kit for 1/2" - 2" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.

Greenlee

Bi-Metal Hole Saw Kit for 1/2" - 2" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.

MFR: Greenlee

MFR #: 830

UPC: 783310191926

Item #: 187241

Available to Order

$146.13 each

Availability

Location	Available Qty

Bi-Metal Hole Saw, Actual Hole Size 2" (50.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2" (50.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

MFR: Greenlee

MFR #: 825-2

UPC: 783310191551

Item #: 166304

Available to Order

$20.47 each

Availability

Location	Available Qty

No Image Available

Greenlee

6-7/8 STEEL TOOTH LIGHT HOLESAW

MFR: Greenlee

MFR #: 35715

UPC: 783310357155

Item #: 51067

Available to Order

$93.90 each

Availability

Location	Available Qty

Quickest, most affordable way to cut perfect holes in ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting. Installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes. in very abrasive materialsand still stay sharp. Stabilizer spring balancescutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Fits a 3/8 IN drill chuck and can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris. Quickest, most affordable way to cut perfect holes inceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilotdrill eliminates changeover time. Fits a 3/8 IN drill chuckand can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris.

Greenlee

Quickest, most affordable way to cut perfect holes in ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting. Installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes. in very abrasive materialsand still stay sharp. Stabilizer spring balancescutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Fits a 3/8 IN drill chuck and can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris. Quickest, most affordable way to cut perfect holes inceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilotdrill eliminates changeover time. Fits a 3/8 IN drill chuckand can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris.

MFR: Greenlee

MFR #: 6923

UPC: 783310069232

Item #: 154046

Available to Order

$52.30 each

Availability

Location	Available Qty

No Image Available

Greenlee

BLADE PKG,RECIP-9.00 X 8/10

MFR: Greenlee

MFR #: 353-969

UPC: 783310099901

Item #: 65768

Available to Order

$32.47 each

Availability

Location	Available Qty

No Image Available

Greenlee

BLADE PKG,RECIP-8.00 X 18

MFR: Greenlee

MFR #: 353-818

UPC: 783310099765

Item #: 161868

Available to Order

$29.64 each

Availability

Location	Available Qty

No Image Available

Greenlee

ARBOR .312 HEX BLST PKGD

MFR: Greenlee

MFR #: 38524

UPC: 783310385240

Item #: 51625

Available to Order

$23.73 each

Availability

Location	Available Qty

No Image Available

Greenlee

DIE SET,6 TON (KC22)

MFR: Greenlee

MFR #: K22S1GL

UPC: 783310030782

Item #: 87657

Available to Order

$1994.65 each

Availability

Location	Available Qty

No Image Available

Greenlee

DRILL/TAP, 10-32 (POP)

MFR: Greenlee

MFR #: LDTAP10-32

UPC: 783310009078

Item #: 500259

In Stock - Check Availability

$23.06 each

Availability

Location	Available Qty

No Image Available

Greenlee

HACKSAW BLADE -24T

MFR: Greenlee

MFR #: 333-1224

UPC: 783310100386

Item #: 136175

Available to Order

$17.53 each

Availability

Location	Available Qty

No Image Available

Greenlee

EXTENSION,BIT (54 X 3/16) POP

MFR: Greenlee

MFR #: 3XT-54

UPC: 783310386865

Item #: 289936

Available to Order

$48.00 each

Availability

Location	Available Qty

Cleans burrs from both sides of the hole in seconds, saving time and labor. Works with any hole size or shape 3/4 IN or larger. Use with existing drills, battery or electric-powered. Ensures safety, less chance of personnel or equipment being cut on sharp edges. Patent pending.

Greenlee

Cleans burrs from both sides of the hole in seconds, saving time and labor. Works with any hole size or shape 3/4 IN or larger. Use with existing drills, battery or electric-powered. Ensures safety, less chance of personnel or equipment being cut on sharp edges. Patent pending.

MFR: Greenlee

MFR #: 11170

UPC: 783310111702

Item #: 121903

Available to Order

$35.66 each

Availability

Location	Available Qty

No Image Available

Greenlee

BIT,STEP 9,7MM (PKGD)

MFR: Greenlee

MFR #: 36018G

UPC: 783310360186

Item #: 993703

Available to Order

$51.74 each

Availability

Location	Available Qty

34401C 1/2 inch Cobalt Metal Cutting Step Bit #1

Greenlee

34401C 1/2 inch Cobalt Metal Cutting Step Bit #1

MFR: Greenlee

MFR #: 34401C

UPC: 783310057895

Item #: 400477

Available to Order

$71.54 each

Availability

Location	Available Qty

GSB12 1-3/8 inch Metal Cutting Step Bit #12

Greenlee

GSB12 1-3/8 inch Metal Cutting Step Bit #12

MFR: Greenlee

MFR #: GSB12

UPC: 783310082033

Item #: 1206529

Available to Order

$109.71 each

Availability

Location	Available Qty

Durable split-point tip for fast, accurate material penetration.?Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.?Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.?Improved double flute design for superior chip evacuation, cutting speeds and tool life.?Three-flat shank for all 1/2 drill chucks.?Laser markings for quick, easy product and size identification. Replaced 30008 Also available for sale in a carton, qty. 25 (Cat #: GSB09-B UPC #: 783310082071?)

Greenlee

Durable split-point tip for fast, accurate material penetration.?Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.?Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.?Improved double flute design for superior chip evacuation, cutting speeds and tool life.?Three-flat shank for all 1/2 drill chucks.?Laser markings for quick, easy product and size identification. Replaced 30008 Also available for sale in a carton, qty. 25 (Cat #: GSB09-B UPC #: 783310082071?)

MFR: Greenlee

MFR #: GSB09

UPC: 783310082002

Item #: 1207053

Available to Order

$88.43 each

Availability

Location	Available Qty

645-1-1/4 Quick Change 1-1/4 inch Carbide Tipped Hole Cutter

Greenlee

645-1-1/4 Quick Change 1-1/4 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1-1/4

UPC: 783310056997

Item #: 200178

Available to Order

$63.39 each

Availability

Location	Available Qty

Quick Change Carbide Tipped Hole Cutter 5/8" (15.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

Greenlee

Quick Change Carbide Tipped Hole Cutter 5/8" (15.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

MFR: Greenlee

MFR #: 645-5/8

UPC: 783310056911

Item #: 41142

Available to Order

$46.72 each

Availability

Location	Available Qty

645-3/4 Quick Change 3/4 inch Carbide Tipped Hole Cutter

Greenlee

645-3/4 Quick Change 3/4 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-3/4

UPC: 783310056935

Item #: 136461

Available to Order

$47.12 each

Availability

Location	Available Qty

645-1 Quick Change 1 inch Carbide Tipped Hole Cutter

Greenlee

645-1 Quick Change 1 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1

UPC: 783310056966

Item #: 200156

Available to Order

$53.90 each

Availability

Location	Available Qty

Quick Change Carbide Cutter Kit, 8 Piece Complete Solutions for 1/2" to 2" conduit. Fast, accurate holes in stainless steel, mild steel, iron, copper, brass, aluminum, fiberglass and plastic sheet. Extends tool life with reduced friction, torque and heat. Split point, cobalt-steel pilot drill eliminates walking and penetrates quickly. Precision engineered, tungsten carbide teeth for fast cutting of round, burr-free holes. Optimized carbide placement reduces friction and torque requires less force and generates less heat while cutting. Flange Stop for Safety prevents over-drilling. Ejector Spring automatic slug removal with every cut.

Greenlee

Quick Change Carbide Cutter Kit, 8 Piece Complete Solutions for 1/2" to 2" conduit. Fast, accurate holes in stainless steel, mild steel, iron, copper, brass, aluminum, fiberglass and plastic sheet. Extends tool life with reduced friction, torque and heat. Split point, cobalt-steel pilot drill eliminates walking and penetrates quickly. Precision engineered, tungsten carbide teeth for fast cutting of round, burr-free holes. Optimized carbide placement reduces friction and torque requires less force and generates less heat while cutting. Flange Stop for Safety prevents over-drilling. Ejector Spring automatic slug removal with every cut.

MFR: Greenlee

MFR #: 648

UPC: 783310064015

Item #: 582231

Available to Order

$590.85 each

Availability

Location	Available Qty

GSBSET3 Metal Cutting Step Bit Set #1, #4, and #9

Greenlee

GSBSET3 Metal Cutting Step Bit Set #1, #4, and #9

MFR: Greenlee

MFR #: GSBSET3

UPC: 783310086086

Item #: 1209297

Available to Order

$191.55 each

Availability

Location	Available Qty

34403C 7/8 inch Cobalt Metal Cutting Step Bit #3

Greenlee

34403C 7/8 inch Cobalt Metal Cutting Step Bit #3

MFR: Greenlee

MFR #: 34403C

UPC: 783310057901

Item #: 537513

Available to Order

$110.67 each

Availability

Location	Available Qty

30008C 1-1/18 inch XT Cobalt Metal Cutting Step Bit #8

Greenlee

30008C 1-1/18 inch XT Cobalt Metal Cutting Step Bit #8

MFR: Greenlee

MFR #: 30008C

UPC: 783310057925

Item #: 475518

Available to Order

$154.56 each

Availability

Location	Available Qty

6-32 Split-point tip resists walking and penetrates material faster. Strong, high-speed steel provides superior resistance to heat and abrasion. Titanium Nitride coating ensures that the bits run cooler, drill faster, and last longer. Optimized core for significantly reduced torque on the user and extended tool life. Designed to drill in up to 1/4" thick material. Durable case and quick-change adapter included

Greenlee

6-32 Split-point tip resists walking and penetrates material faster. Strong, high-speed steel provides superior resistance to heat and abrasion. Titanium Nitride coating ensures that the bits run cooler, drill faster, and last longer. Optimized core for significantly reduced torque on the user and extended tool life. Designed to drill in up to 1/4" thick material. Durable case and quick-change adapter included

MFR: Greenlee

MFR #: DTAPSS6-32

UPC: 783310025795

Item #: 1231672

Available to Order

$21.64 each

Availability

Location	Available Qty

8-32 Split-point tip resists walking and penetrates material faster. Strong, high-speed steel provides superior resistance to heat and abrasion. Titanium Nitride coating ensures that the bits run cooler, drill faster, and last longer. Optimized core for significantly reduced torque on the user and extended tool life. Designed to drill in up to 1/4" thick material. Durable case and quick-change adapter included

Greenlee

8-32 Split-point tip resists walking and penetrates material faster. Strong, high-speed steel provides superior resistance to heat and abrasion. Titanium Nitride coating ensures that the bits run cooler, drill faster, and last longer. Optimized core for significantly reduced torque on the user and extended tool life. Designed to drill in up to 1/4" thick material. Durable case and quick-change adapter included

MFR: Greenlee

MFR #: DTAPSS8-32

UPC: 783310025788

Item #: 1176373

Available to Order

$21.64 each

Availability

Location	Available Qty

Long Impact Auger Wood Bit 11/16" x 24". Patented cutting edge for fast easy drilling of clean holes, especially in salt treated utility poles. Made from hardened alloy steel for added toughness. The self-feeding threaded screw point draws the bit completely through the wood - no need to push the bit while drilling. Over center flute for evacuating chips. Shaft is straightened for fewer vibrations to the hand and to help control the quality of the hole. Cutting edge can be re-sharpened multiple times and continues to self feed. 7/16" Hex Shank with easy to fit quick change groove for Impact Drivers.

Greenlee

Long Impact Auger Wood Bit 11/16" x 24". Patented cutting edge for fast easy drilling of clean holes, especially in salt treated utility poles. Made from hardened alloy steel for added toughness. The self-feeding threaded screw point draws the bit completely through the wood - no need to push the bit while drilling. Over center flute for evacuating chips. Shaft is straightened for fewer vibrations to the hand and to help control the quality of the hole. Cutting edge can be re-sharpened multiple times and continues to self feed. 7/16" Hex Shank with easy to fit quick change groove for Impact Drivers.

MFR: Greenlee

MFR #: 70PT-11/16

UPC: 783310110972

Item #: 491147

Available to Order

$80.59 each

Availability

Location	Available Qty

Quick Change D'VersiBIT Extension System Kit. 2.25' x 5" x 39.5" (57.1mm x 127mm x 1003.3mm). All the same great features as a traditional flexible drill bit , but with even more flexibility and versatility. For use when drilling between studs and joists. Can use with any type of bit with a 1/4" quick change hex on it, such as spade bits, auger bits or drill bits for increased application flexibility. Replace only the bit as it wars rather than the entire bit and shaft for lower overall cost of ownership. Quickly and easily switch from drilling to pulling with the quick change pulling grip.

Greenlee

Quick Change D'VersiBIT Extension System Kit. 2.25' x 5" x 39.5" (57.1mm x 127mm x 1003.3mm). All the same great features as a traditional flexible drill bit , but with even more flexibility and versatility. For use when drilling between studs and joists. Can use with any type of bit with a 1/4" quick change hex on it, such as spade bits, auger bits or drill bits for increased application flexibility. Replace only the bit as it wars rather than the entire bit and shaft for lower overall cost of ownership. Quickly and easily switch from drilling to pulling with the quick change pulling grip.

MFR: Greenlee

MFR #: 921-36

UPC: 783310124153

Item #: 111930

Available to Order

$75.30 each

Availability

Location	Available Qty

Combination Drill/Tap Bits. 6 Piece Drill/Tap Set, Metric M3-M10. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

Greenlee

Combination Drill/Tap Bits. 6 Piece Drill/Tap Set, Metric M3-M10. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

MFR: Greenlee

MFR #: DTAPKITM

UPC: 783310121510

Item #: 171312

In Stock - Check Availability

$92.66 each

Availability

Location	Available Qty

1/2" (12.7) hole diameterBore hardwood, softwood, plywood and drywall. Innovative self-feeding design requires less effort and reduces vibration. Unique tapered design allows existing hole enlargement. 1/4" Quick change hex shank. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling. P.O.P. Packaged.

Greenlee

1/2" (12.7) hole diameterBore hardwood, softwood, plywood and drywall. Innovative self-feeding design requires less effort and reduces vibration. Unique tapered design allows existing hole enlargement. 1/4" Quick change hex shank. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling. P.O.P. Packaged.

MFR: Greenlee

MFR #: 34A-1/2

UPC: 783310037125

Item #: 70298

Available to Order

$9.64 each

Availability

Location	Available Qty

7/8" (22.2) hole diameterBore hardwood, softwood, plywood and drywall. Innovative self-feeding design requires less effort and reduces vibration. Unique tapered design allows existing hole enlargement. 1/4" Quick change hex shank. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling. P.O.P. Packaged.

Greenlee

7/8" (22.2) hole diameterBore hardwood, softwood, plywood and drywall. Innovative self-feeding design requires less effort and reduces vibration. Unique tapered design allows existing hole enlargement. 1/4" Quick change hex shank. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling. P.O.P. Packaged.

MFR: Greenlee

MFR #: 34A-7/8

UPC: 783310037156

Item #: 50749

Available to Order

$11.40 each

Availability

Location	Available Qty

5/8" (15.9) hole diameterBore hardwood, softwood, plywood and drywall. Innovative self-feeding design requires less effort and reduces vibration. Unique tapered design allows existing hole enlargement. 1/4" Quick change hex shank. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling. P.O.P. Packaged.

Greenlee

5/8" (15.9) hole diameterBore hardwood, softwood, plywood and drywall. Innovative self-feeding design requires less effort and reduces vibration. Unique tapered design allows existing hole enlargement. 1/4" Quick change hex shank. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling. P.O.P. Packaged.

MFR: Greenlee

MFR #: 34A-5/8

UPC: 783310037132

Item #: 71617

Available to Order

$9.98 each

Availability

Location	Available Qty