Littelfuse

Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 16,000 global associates. Littelfuse partners with customers to design and deliver innovative, reliable solutions. Serving more than 100,000 end customers, Littelfuse's products are found in various industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse has been driving innovation and technology and building communities for over 95 years.

Showing 1 - 48 of 111 Items

Sort By:

Per Page

expand_less Category (1)

Industrial Automation and Control add remove
- Motor Control add remove
  - Electrical Relays and Accessories add remove

expand_less Ways to Shop

Made in USA

The ALT alternating relays are used to alternate between two loads. The ALT is commonly used in duplex pumping applications to balance the runtime of both pumps. The ALT-S is used in single high-level float applications. When the float switch opens, the alternating relay changes state, forcing the other pump to run the next time the float closes. All ALT relays have a built-in debounce feature that prevents the relay from changing state if the switch or float contact bounces momentarily. The ALT-X has an internal cross-connected relay and is used in dual high-level float applications. These floats are commonly referred to as lead and lag floats. The pumps alternate as in the ALT-S version but the crossconnected relay configuration allows both pumps to run simultaneously when both the lead and lag floats are closed. These relays are also available with a built-in switch (SW option) that is used to manually force one of the pumps to run every time the float switch is closed. This is helpful when a pump has been removed for repair or for test purposes. In the case of the ALT-X-SW, the switch essentially forces one pump to be the lead pump, while still allowing the second to run when both floats are closed. Must use the OT08PC socket for UL Rating!

Littelfuse

ALT-115-S-SW Symcom Alternating Relay/ 95-125V/ 8-

MFR: Littelfuse

MFR #: ALT-115-S-SW

UPC: 079458991314

Item #: 1382862

Available to Order

Availability

Location	Available Qty

Littelfuse

Solid State Timer

MFR: Littelfuse

MFR #: KSDB314SP

UPC: 079458995565

Item #: 150727

In Stock - Check Availability

$243.03 each

Availability

Location	Available Qty

Littelfuse

Ground Fault Ground-Check Monitor

MFR: Littelfuse

MFR #: SE-105

UPC: 079458188233

Item #: 454484

Available to Order

$5843.90 each

Availability

Location	Available Qty

Littelfuse

Gf/Gc Term Assembly 5.6V 50W Tc

MFR: Littelfuse

MFR #: SE-TA6A

UPC: 079458989540

Item #: 531235

Available to Order

$2046.95 each

Availability

Location	Available Qty

Littelfuse

ER-600VC ER-600VC Series Res Sensing 20K 1000V L-L

MFR: Littelfuse

MFR #: ER-600VC

UPC: 079458977950

Item #: 450698

Available to Order

$1765.08 each

Availability

Location	Available Qty

50-W ground-check termination assembly with convenient mounting holes and screw terminals.

Littelfuse

SE-TA12A Relay Series Termination Assembly - 12V

MFR: Littelfuse

MFR #: SE-TA12A

UPC: 079458989489

Item #: 482948

Available to Order

$2046.95 each

Availability

Location	Available Qty

Used when replacing an Atkinson Omser II with an SE-130-Series Monitor.

Littelfuse

PMA-8 PMA Series Enc Panel Adaptor Se-134/Atkinson

MFR: Littelfuse

MFR #: PMA-8

UPC: 079458978421

Item #: 1008517

Available to Order

$1775.48 each

Availability

Location	Available Qty

The SE-325 Neutral-Grounding-Resistor Monitor is used on resistance-grounded systems up to 25 kV to monitor the integrity of the neutral-to-ground path and to detect ground faults. It measures current and voltage in a transformer or generator neutral-to-ground connection and continuity of the neutral-grounding resistor (NGR). The SE-325 coordinates these three measurements to detect a loose connection, corrosion, ground fault, or NGR failure, and provides one alarm or trip output contact.

Littelfuse

SE-325 SE 325 Series Neutral-Grounding-Resistor Monitor

MFR: Littelfuse

MFR #: SE-325

UPC: 079458988079

Item #: 1280879

Available to Order

$6309.38 each

Availability

Location	Available Qty

Remote indication and reset for the SE-330, SE-330AU, and SE-330HV. NEMA 4 and NEMA 13 rating. Standard 22-mm mounting.

Littelfuse

RK-332 RK 332 Series Remote Indication And Reset Assembly

MFR: Littelfuse

MFR #: RK-332

UPC: 079458987836

Item #: 1204732

Available to Order

$1842.23 each

Availability

Location	Available Qty

Littelfuse

EFCT-1 Relay Series Xfmr Current 100 1 Ef 3.25In Id

MFR: Littelfuse

MFR #: EFCT-1

UPC: 079458977684

Item #: 534791

Available to Order

$2864.50 each

Availability

Location	Available Qty

The SE-330 is an advanced ground-fault and neutral-grounding resistor monitoring relay that is compliant with Rule10-302 of the 2018 Canadian Electrical Code Part I (CE Code). It measures neutral current, neutral-to-ground voltage, and neutral-to-ground resistance. It provides continuous monitoring of the neutral-to-ground path to verify that the neutral-grounding resistor (NGR) is intact and that it has not been bypassed or shorted. An open NGR renders currentsensing ground-fault protection inoperative and could result in a false belief that the system is functioning properly. A shorted NGR results in higher-than-expected ground-fault current. The SE-330 can be used with low- and medium-voltage transformers and generators with low- or high-resistance grounding used in processing, manufacturing, chemical, pulp and paper, petroleum, and water-treatment facilities. For high-voltage applications, use the SE-330HV. For applications that require conformance to Australian standards, use the SE-330AU.

Littelfuse

SE-330-SMA SE 330 Series Se-330 Surface-Mount Adaptor

MFR: Littelfuse

MFR #: SE-330-SMA

UPC: 079458988604

Item #: 1204733

Available to Order

$1321.00 each

Availability

Location	Available Qty

Littelfuse

EFCT-26 Relay Series Xfmr Current 100:1 Ef 26Mm Id

MFR: Littelfuse

MFR #: EFCT-26

UPC: 079458977721

Item #: 866232

Available to Order

$1793.60 each

Availability

Location	Available Qty

50-W ground-check termination assembly with convenient mounting holes and wire leads.

Littelfuse

SE-TA6A-WL Relay Series Gf/Gc Term Assy 5.6V 50W Tc Wl

MFR: Littelfuse

MFR #: SE-TA6A-WL

UPC: 079458989557

Item #: 656337

Available to Order

$2349.20 each

Availability

Location	Available Qty

Littelfuse

ER-15KV ER-15KV Series Res Sensing 100K 15000V L-L

MFR: Littelfuse

MFR #: ER-15KV

UPC: 079458977905

Item #: 501382

Available to Order

$10080.30 each

Availability

Location	Available Qty

Littelfuse

MP8000 MP8000 Series Motor Overload Protection 8000

MFR: Littelfuse

MFR #: MP8000

UPC: 079458046113

Item #: 719830

Available to Order

$2952.45 each

Availability

Location	Available Qty

Littelfuse

ECSL41AD SSAC Current Sensor

MFR: Littelfuse

MFR #: ECSL41AD

UPC: 079458992724

Item #: 1238971

Available to Order

$627.83 each

Availability

Location	Available Qty

Littelfuse

SE-330-07-00 SE 330 Series Ngr Mon.,Univ.,Sc Fiber & Rj45,61850

MFR: Littelfuse

MFR #: SE-330-07-00

UPC: 079458812848

Item #: 1528349

In Stock - Check Availability

$25296.25 each

Availability

Location	Available Qty

Littelfuse

SE-330-04-00 SE 330 Series Ngr Mon.,Univ., Ethernet Sc Fiber & Rj45

MFR: Littelfuse

MFR #: SE-330-04-00

UPC: 079458812473

Item #: 1526332

Available to Order

$23538.35 each

Availability

Location	Available Qty

Littelfuse

601 Relay Series 3-Phase Voltage Monitor W/ Dis

MFR: Littelfuse

MFR #: 601

UPC: 079458989632

Item #: 1543863

Available to Order

$1635.70 each

Availability

Location	Available Qty

Littelfuse

NDS-8 Relay Series Pin 8-Pin Socket

MFR: Littelfuse

MFR #: NDS-8

UPC: 079458997132

Item #: 746926

Available to Order

$30.98 each

Availability

Location	Available Qty

Littelfuse

460-B Symcom 3-Phase Volt Mon/ 190-480V/Ad

MFR: Littelfuse

MFR #: 460-B

UPC: 079458990591

Item #: 1359341

Available to Order

$493.30 each

Availability

Location	Available Qty

Littelfuse

OT08PC SSAC Socket, 8 Pin Octal

MFR: Littelfuse

MFR #: OT08PC

UPC: 079458997422

Item #: 162871

Available to Order

$49.25 each

Availability

Location	Available Qty

Littelfuse

KRDM215M SSAC 2X2 D.O.M. W/Relay

MFR: Littelfuse

MFR #: KRDM215M

UPC: 079458994773

Item #: 1489833

Available to Order

$278.45 each

Availability

Location	Available Qty

Littelfuse

460-100-SP Symcom 1-Phase Voltage Monitor/ 115V/

MFR: Littelfuse

MFR #: 460-100-SP

UPC: 079458990508

Item #: 878271

Available to Order

$503.23 each

Availability

Location	Available Qty

Littelfuse

102A3 Symcom 3-Phase Voltage Monitor/ 190-4

MFR: Littelfuse

MFR #: 102A3

UPC: 079458990058

Item #: 24880

Available to Order

$773.13 each

Availability

Location	Available Qty

Littelfuse

TSB422 SSAC Delay On Break Timer

MFR: Littelfuse

MFR #: TSB422

UPC: 079458020434

Item #: 887406

Available to Order

$254.13 each

Availability

Location	Available Qty

Littelfuse

460 Symcom 3-Phase Volt Mon/ 190-480V/ Ad

MFR: Littelfuse

MFR #: 460

UPC: 079458989625

Item #: 150225

Available to Order

Availability

Location	Available Qty

Littelfuse

FSU1004 SSAC Universal Adjustable Flasher

MFR: Littelfuse

MFR #: FSU1004

UPC: 079458993622

Item #: 1260645

Available to Order

$406.55 each

Availability

Location	Available Qty

Littelfuse

MSM42W6 SSAC Solid State Timer (D.O.M.)

MFR: Littelfuse

MFR #: MSM42W6

UPC: 079458997095

Item #: 207080

Available to Order

$194.35 each

Availability

Location	Available Qty

Littelfuse

P1023-20 Relay Series Track For Din Rail

MFR: Littelfuse

MFR #: P1023-20

UPC: 079458997644

Item #: 1263271

Available to Order

$40.60 each

Availability

Location	Available Qty

Littelfuse

NDS-11 Relay Series Din 11-Pin Socket

MFR: Littelfuse

MFR #: NDS-11

UPC: 079458997125

Item #: 602774

Available to Order

$53.75 each

Availability

Location	Available Qty

Littelfuse

T10400 SSAC On-Delay Timer/ 460V/ Adjustab

MFR: Littelfuse

MFR #: T10400

UPC: 079458999105

Item #: 1567495

Available to Order

$707.05 each

Availability

Location	Available Qty

Littelfuse

HRDR431A1R SSAC Recycling Timer

MFR: Littelfuse

MFR #: HRDR431A1R

UPC: 079458993974

Item #: 983952

Available to Order

$373.83 each

Availability

Location	Available Qty

Littelfuse

TDBL120ALD SSAC Digi-Set (D.O.B.)

MFR: Littelfuse

MFR #: TDBL120ALD

UPC: 079458999556

Item #: 942021

Available to Order

$598.68 each

Availability

Location	Available Qty

The TDU Series are encapsulated solid-state, delay-on-make timers that combine digital timing circuitry with universal voltage operation. The TDU offers DIP switch adjustment allowing accurate selection of the time delay over the full time delay range. This series is an excellent choice for process control systems and OEM equipment. Operation (Delay-on-Make): Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.

Littelfuse

TDU3000A SSAC Solid State Timer

MFR: Littelfuse

MFR #: TDU3000A

UPC: 079458999976

Item #: 133032

Available to Order

$205.20 each

Availability

Location	Available Qty

The 455 Series are 3-phase voltage monitors that combine load and line side monitoring to offer complete protection. Monitoring the load side will alert the user of contactor failure or impending contactor failure. Line side monitoring will also protect the motor from damaging fault conditions that may be present prior to the motor starting. With other line/load side monitors, the motor must be started before a voltage fault is detected. With the 455, your motor is fully protected at all times. The 455 Series are 3-phase, dual range voltage monitors that protect 190-480VAC, 50*/60Hz motors, regardless of their size. It automatically selects between the 200V and 400V range when the user selects the nominal voltage setpoint. Other adjustments include a 2-30 second trip delay, a 2-300 second restart delay (and manual restart) and a voltage unbalance trip point of 2-8%. The voltage monitors circuitry is powered through the line side connections, so there is no need for separate control power, making it easy to install. Equipped with an infrared LED, the 455 Sereies can communicate to the optional hand-held diagnostic tool, Informer-MS to obtain valuable information such as real-time voltage, voltage unbalance on both line and load sides, motor run hours, last 20 faults, last 32 motor starts, high and low voltage trip points, voltage unbalance trip point, restart and trip delay settings, LED status and more.

Littelfuse

455 Symcom 3-Phase Line-Load Volt Mon/ 19

MFR: Littelfuse

MFR #: 455

UPC: 079458989618

Item #: 1506441

Available to Order

$916.88 each

Availability

Location	Available Qty

The 250A is a 3-phase, auto-ranging, dual-range voltage monitor that protects 190-480VAC, 50*/60Hz motors regardless of size from low and high voltage, unbalance/single-phase, and reverse-phase. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically selects between the 200V and 400V range. The 250A also features adjustable or manual restart delay. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the Littelfuses output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to acceptable levels. The Model 250A includes advanced single LED diagnostics. Five different light patterns distinguish between faults and normal conditions.

Littelfuse

250A Symcom 3-Phase Voltage Monitor/ 190-4

MFR: Littelfuse

MFR #: 250A

UPC: 079458990447

Item #: 1564903

Available to Order

$850.73 each

Availability

Location	Available Qty

The FA and FS Series Flashers have proven their reliability through years of use on communication towers, smoke stacks, cooling towers, tall buildings, bridges and utility towers. The highest quality components are encapsulated in a rugged plastic housing with a molded-in heat transfer plate. The flash rate, ratio, and failsafe design meet FAA regulations. Zero voltage switching can increase lamp life up to ten times. The FS155-30RF & FS165-30RF include superior RF filtering circuitry for use in high RF installations, including AM hot towers. Operation: FS Series - Flasher (OFF First), FA Series - Flashers & Aux. Modules: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.

Littelfuse

FS146 SSAC Ac Low Cost Flasher

MFR: Littelfuse

MFR #: FS146

UPC: 079458993417

Item #: 1551385

Available to Order

$136.30 each

Availability

Location	Available Qty

The 777 is a fully programmable electronic overload relay designed to protect any motor drawing 2-800 full load amps (external CTs are required above 90 amps). The 777 (family of products) is for 3-phase 200-480VAC applications, with several specialized units for other voltage ranges and unique applications. Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. Some unique applications include use with a Subtrol equipped Franklin submersible motor to detect high motor temperatures and applications where a fast linear trip is required. All of the overload relays provide unsurpassed protection by combining overload, voltage, phase loss and reversal, voltage and current unbalance, power monitoring, and underload based on current in one package. For standalone applications, the units incorporate a 3-digit LED display that is used for programming, providing real-time operational information and displaying diagnostic codes to aid in troubleshooting a fault condition. The units also feature a communications port that can be used with communication modules listed in the 777 accessories section to form a Modbus, DeviceNet Profibus, or Ethernet network. Up to 99 units can be remotely monitored and controlled from a PC, PLC, or SCADA system, and data logging through a PC with the optional Solutions software. This capability allows for a simple, cost-effective way to meet new requirements for arc-flash safety.

Littelfuse

777-LR-P2 Symcom 3-Phase Overload Relay/200-480

MFR: Littelfuse

MFR #: 777-LR-P2

UPC: 079458991048

Item #: 182434

In Stock - Check Availability

$2952.45 each

Availability

Location	Available Qty

The TDM/TDMH/TDML Series is a delay-on-make timer that combines accurate digital circuitry with isolated, DPDT relay contacts in an industry standard 8-pin plug-in package. DIP switch adjustment allows precise selection of the time delay over the full time delay range. The TDM/TDMH/TDML Series is the product of choice for custom control panel and OEM designers. Operation (Delay-on-Make): Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output relay energizes and remains energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.

Littelfuse

TDM120AL SSAC Digi-Set (D.O.M.)

MFR: Littelfuse

MFR #: TDM120AL

UPC: 079458999624

Item #: 47898

Available to Order

$417.05 each

Availability

Location	Available Qty

The PGR-3100 indicates the presence of voltage on each phase of a three-phase system. The LEDs on the panel illuminate when voltage is present. When a ground-fault occurs, the voltage on the faulted phase reduces to ground potential, causing the LEDs for the faulted phase to dim. On a resistance grounded or ungrounded system the LEDs for the unfaulted phases become brighter. Ungrounded ac systems are required by the National Electrical Code (NEC) Article 250.21(B) and the Canadian Electrical Code Part 1, Section 10-106 (2) to have ground detectors, such as the PGR-3100, installed on the system. External potential transformers (PTs) can be used to step down system voltage, allowing the PGR-3100 to be applied to any system voltage. PTs are not required for system voltages up to 600 Vac.

Littelfuse

PGR-3100 PGR 3100 Series Ground Fault Indication System W/ Leds

MFR: Littelfuse

MFR #: PGR-3100

UPC: 079458177312

Item #: 952482

Available to Order

$2699.93 each

Availability

Location	Available Qty

The 102A is a 3-phase, auto-ranging, dual-range voltage monitor that protects 190-600VAC, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically selects between the 200V and 400V range. A unique microcontroller-based voltage and phase-sensing circuit constantly monitors the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to acceptable levels. The Model 102A includes advanced single LED diagnostics. Five different light patterns distinguish between faults and normal conditions.

Littelfuse

102A Symcom 3-Phase Voltage Monitor/ 190-4

MFR: Littelfuse

MFR #: 102A

UPC: 079458990034

Item #: 145443

Available to Order

$344.19 each

Availability

Location	Available Qty

The TMV and TSU Series are universal voltage delay-on-make timers. Two models cover all the popular voltages and time delays. Available with knob or external adjust time delay. Its simple two terminals can easily be connected in series with a relay coil, contactor coil, solenoid, lamps, small motor, etc., to delay their energization, prevent short cycling or to sequence on various loads. Operation (Delay-on-Make):Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.

Littelfuse

TMV8000 SSAC Multi-Voltage Timer

MFR: Littelfuse

MFR #: TMV8000

UPC: 079458010794

Item #: 496304

Available to Order

$169.65 each

Availability

Location	Available Qty

The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LEDs indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket. Operation: Alternating: When the rotary switch is in the alternate position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position A to lock Load A or position B to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate. Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the units input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation. Duplexing (Cross Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously. The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated.

Littelfuse

ARP63S SSAC Alternating Relay

MFR: Littelfuse

MFR #: ARP63S

UPC: 079458991505

Item #: 584614

Available to Order

$475.63 each

Availability

Location	Available Qty

Panel-mounted analog am meter displays the Ground-Fault Current as a percentage of the set-point.

Littelfuse

PGA-0500 Relay Series Analog Percent Meter

MFR: Littelfuse

MFR #: PGA-0500

UPC: 079458178173

Item #: 1022868

Available to Order

$1979.63 each

Availability

Location	Available Qty

The TDUB Series combines digital timing circuitry with universal voltage operation. Voltages of 24 to 240VAC and 12 to 24VDC are available in three ranges. The TDUB Series offers DIP switch selectable time delays ranging from 0.1 seconds to 102.3 minutes in three ranges. Its 1A rated output, ability to operate on multiple voltages, and wide range of switch selectable time delays make the TDUB Series an excellent choice for process control systems and OEM equipment. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output energizes. The time delay begins when the initiate switch is opened (trailing edge triggered). The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.

Littelfuse

TDUB3000A SSAC Digi-Set Timer-Delay On Break

MFR: Littelfuse

MFR #: TDUB3000A

UPC: 079458006773

Item #: 185186

Available to Order

$361.28 each

Availability

Location	Available Qty

The DCSA Series is a loop-powered, linear output current transducer that provides an output that is directly proportional to the RMS AC current passing through the LCSC10T12 sensor. The DCSA provides either an analog current or voltage: 4 - 20 mA, 1 to 5VDC, or 2 to 10VDC. Each unit is factory calibrated for monitoring (with the LCSC10T12 connected) in one of four ranges; 0 - 5, 0 - 10, 0 - 20, or 0 - 50A. Zero and span adjustments allow field calibration if needed. The DCSA mounts on both DIN 1 and DIN 3 rails.

Littelfuse

DCSA50 SSAC Ac Current Transducer

MFR: Littelfuse

MFR #: DCSA50

UPC: 079458992083

Item #: 1534386

Available to Order

$528.35 each

Availability

Location	Available Qty

Littelfuse

SE-330-03-01 SE 330 Series Ngr Monitor Nc Ethernet

MFR: Littelfuse

MFR #: SE-330-03-01

UPC: 079458988420

Item #: 1502618

Available to Order

$23538.35 each

Availability

Location	Available Qty