Control Relay

Showing 1 - 48 of 86 Items

Sort By:

Per Page

expand_less Brand (3)

expand_less Ways to Shop

Made in USA

Levnet Rf Wireless 20A Relay Power Pack, Switching, 1/2 Inch Threaded Nipple, 120-277V, 50/60Hz, 902MHz, Enocean.

Leviton

Levnet Rf Wireless 20A Relay Power Pack, Switching, 1/2 Inch Threaded Nipple, 120-277V, 50/60Hz, 902MHz, Enocean.

MFR: Leviton

MFR #: WSP20-9D0

UPC: 078477713594

Item #: 335363

Available to Order

$189.68 each

Availability

Location	Available Qty

Levnet Rf Wireless 5A Relay 1-10V Dimming Fixture Controller, 1/2 Inch Threaded Nipple, 120-277V, 50/60Hz, 902MHz, Enocean.

Leviton

Levnet Rf Wireless 5A Relay 1-10V Dimming Fixture Controller, 1/2 Inch Threaded Nipple, 120-277V, 50/60Hz, 902MHz, Enocean.

MFR: Leviton

MFR #: WSD05-9D0

UPC: 078477713488

Item #: 399574

Available to Order

$187.92 each

Availability

Location	Available Qty

Levnet Rf Wireless 20A Relay 1-10V Dimming Fixture Controller, 1/2 Inch Threaded Nipple, 120-277V, 50/60Hz, 902MHz, Enocean.

Leviton

Levnet Rf Wireless 20A Relay 1-10V Dimming Fixture Controller, 1/2 Inch Threaded Nipple, 120-277V, 50/60Hz, 902MHz, Enocean.

MFR: Leviton

MFR #: WSD20-9D0

UPC: 078477713617

Item #: 303595

Available to Order

$216.64 each

Availability

Location	Available Qty

The ALT alternating relays are used to alternate between two loads. The ALT is commonly used in duplex pumping applications to balance the runtime of both pumps. The ALT-S is used in single high-level float applications. When the float switch opens, the alternating relay changes state, forcing the other pump to run the next time the float closes. All ALT relays have a built-in debounce feature that prevents the relay from changing state if the switch or float contact bounces momentarily. The ALT-X has an internal cross-connected relay and is used in dual high-level float applications. These floats are commonly referred to as lead and lag floats. The pumps alternate as in the ALT-S version but the crossconnected relay configuration allows both pumps to run simultaneously when both the lead and lag floats are closed. These relays are also available with a built-in switch (SW option) that is used to manually force one of the pumps to run every time the float switch is closed. This is helpful when a pump has been removed for repair or for test purposes. In the case of the ALT-X-SW, the switch essentially forces one pump to be the lead pump, while still allowing the second to run when both floats are closed. Must use the OT08PC socket for UL Rating!

Littelfuse

ALT-115-S-SW Symcom Alternating Relay/ 95-125V/ 8-

MFR: Littelfuse

MFR #: ALT-115-S-SW

UPC: 079458991314

Item #: 1382862

Available to Order

Availability

Location	Available Qty

No Image Available

Littelfuse

Ground Fault Ground-Check Monitor

MFR: Littelfuse

MFR #: SE-105

UPC: 079458188233

Item #: 454484

Available to Order

$5843.90 each

Availability

Location	Available Qty

No Image Available

Littelfuse

Gf/Gc Term Assembly 5.6V 50W Tc

MFR: Littelfuse

MFR #: SE-TA6A

UPC: 079458989540

Item #: 531235

Available to Order

$2046.95 each

Availability

Location	Available Qty

Used On Systems Up To 1 kV.

Littelfuse

ER-600VC ER-600VC Series Res Sensing 20K 1000V L-L

MFR: Littelfuse

MFR #: ER-600VC

UPC: 079458977950

Item #: 450698

Available to Order

$1765.08 each

Availability

Location	Available Qty

Contact Expansion, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 8 N/O, 1 N/C, UB = 110 -120 VAC, 90mm

PILZ

Contact Expansion, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 8 N/O, 1 N/C, UB = 110 -120 VAC, 90mm

MFR: PILZ

MFR #: 774143

Item #: 180000

Available to Order

$705.00 each

Availability

Location	Available Qty

PNOZsigma Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 V DC, 22.5 mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates, Light Guard

PILZ

PNOZsigma Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 V DC, 22.5 mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates, Light Guard

MFR: PILZ

MFR #: 750104

Item #: 519846

Available to Order

$510.00 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 1 N/C, 1 SC, Automatic/Monitored Start, UB 24 V AC/DC, 45 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 1 N/C, 1 SC, Automatic/Monitored Start, UB 24 V AC/DC, 45 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

MFR: PILZ

MFR #: 774310

Item #: 180711

In Stock - Check Availability

$600.00 each

Availability

Location	Available Qty

PSSu, Base Module for Electronic Modules, Periphery, C-rail, 1-Row, 6 Connection Levels, 12 Terminals, Spring-Loaded Connection

PILZ

PSSu, Base Module for Electronic Modules, Periphery, C-rail, 1-Row, 6 Connection Levels, 12 Terminals, Spring-Loaded Connection

MFR: PILZ

MFR #: 312623

Item #: 1532729

Available to Order

$70.00 each

Availability

Location	Available Qty

PNOZsigma Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 VDC, 22.5 mm, Plug-in Spring-Loaded Terminals, Monitoring of E-STOP, Safety Gates, Lightguard

PILZ

PNOZsigma Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 VDC, 22.5 mm, Plug-in Spring-Loaded Terminals, Monitoring of E-STOP, Safety Gates, Lightguard

MFR: PILZ

MFR #: 751104

Item #: 503861

Available to Order

$510.00 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without detection of Shorts Across Contacts, 3 N/O, 1 N/C,1 SC, Automatic/Monitored Start, UB = 24 V AC/DC, 45mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates Sidewards Compatibility with PNOZ X3

PILZ

Safety Relay, 1/2-Channel Wiring with/without detection of Shorts Across Contacts, 3 N/O, 1 N/C,1 SC, Automatic/Monitored Start, UB = 24 V AC/DC, 45mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates Sidewards Compatibility with PNOZ X3

MFR: PILZ

MFR #: 787314

Item #: 1587134

Available to Order

$625.50 each

Availability

Location	Available Qty

PNOZsigma Safety Relay, 1-Channel Wiring, Without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 VDC, 17.5mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates

PILZ

PNOZsigma Safety Relay, 1-Channel Wiring, Without Detection of Shorts Across Contacts, Manual/Automatic Start, 3 N/O, 1 N/C, 1 SC, UB 24 VDC, 17.5mm, Plug-in Screw Terminals, Monitoring of E-STOP, Safety Gates

MFR: PILZ

MFR #: 750102

Item #: 1638205

Available to Order

$379.50 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without detection of Shorts Across Contacts, 2 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates, with 2 Delay-on De-Energization Contacts, Delay Time Adjustable

PILZ

Safety Relay, 1/2-Channel Wiring with/without detection of Shorts Across Contacts, 2 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates, with 2 Delay-on De-Energization Contacts, Delay Time Adjustable

MFR: PILZ

MFR #: 774502

Item #: 1552481

Available to Order

$895.50 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 7 N/O, 2 N/C, 2 SC, Automatic/Manual/Monitored Start and Automatic Start with Start-up Test, UB 24 V AC/ DC, 90 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 7 N/O, 2 N/C, 2 SC, Automatic/Manual/Monitored Start and Automatic Start with Start-up Test, UB 24 V AC/ DC, 90 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

MFR: PILZ

MFR #: 774609

Item #: 111337

Available to Order

$1230.00 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 1 N/C, 1 SC, Automatic/Monitored Start, UB 120 V AC/24 V DC, 45 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 1 N/C, 1 SC, Automatic/Monitored Start, UB 120 V AC/24 V DC, 45 mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

MFR: PILZ

MFR #: 774316

Item #: 181435

In Stock - Check Availability

$600.00 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 7 N/O, 1 N/C,1 SC, Automatic/Manual/Monitored Start, Start-up Test, UB = 110-120 V AC/24 V DC, 90mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates, Feedback Loop

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 7 N/O, 1 N/C,1 SC, Automatic/Manual/Monitored Start, Start-up Test, UB = 110-120 V AC/24 V DC, 90mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates, Feedback Loop

MFR: PILZ

MFR #: 774085

Item #: 523235

Available to Order

$1056.00 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates with 2 Delay-on De-Energization Contacts, Release Time 0.5s Fixed

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 3 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates with 2 Delay-on De-Energization Contacts, Release Time 0.5s Fixed

MFR: PILZ

MFR #: 774544

Item #: 1394909

Available to Order

$909.00 each

Availability

Location	Available Qty

PNOZsigma Contact Expansion, 4 N/O, 1 N/C, UB 24 VDC, 17.5 mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

PILZ

PNOZsigma Contact Expansion, 4 N/O, 1 N/C, UB 24 VDC, 17.5 mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

MFR: PILZ

MFR #: 750107

Item #: 630828

Available to Order

$334.50 each

Availability

Location	Available Qty

PNOZsigma Contact Expansion, 2 N/O, 1 SC, UB 24 VDC, 12.5mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

PILZ

PNOZsigma Contact Expansion, 2 N/O, 1 SC, UB 24 VDC, 12.5mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

MFR: PILZ

MFR #: 750108

Item #: 1545190

Available to Order

$292.50 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 Safety Outputs, 1 Auxiliary Output in SC Technology, Automatic/Monitored Start, UB = 24 VDC, 22.5mm, Plug-in Terminals of Screw Type, Connection Between Several Devices, Monitoring of E-STOP, Safety Gates, Feedback Loop

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 Safety Outputs, 1 Auxiliary Output in SC Technology, Automatic/Monitored Start, UB = 24 VDC, 22.5mm, Plug-in Terminals of Screw Type, Connection Between Several Devices, Monitoring of E-STOP, Safety Gates, Feedback Loop

MFR: PILZ

MFR #: 774133

Item #: 831934

Available to Order

$814.00 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates, with 2 Delay-on De-Energization Contacts

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 N/O, 2 N/Ot-d, UB = 24 VDC, 45mm, Screw Terminals Integrated, E-STOP Monitoring, Safety Gates, with 2 Delay-on De-Energization Contacts

MFR: PILZ

MFR #: 774500

Item #: 418013

Available to Order

$895.50 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 Safety Outputs, 1 Auxiliary Output in SC Technology, Delayed Automatic/Monitored Start, UB = 24 VDC, 22.5mm, Plug-in Terminals of Screw Type, Monitoring of E-STOP, Safety Gates, Feedback Loop

PILZ

Safety Relay, 1/2-Channel Wiring with/without Detection of Shorts Across Contacts, 2 Safety Outputs, 1 Auxiliary Output in SC Technology, Delayed Automatic/Monitored Start, UB = 24 VDC, 22.5mm, Plug-in Terminals of Screw Type, Monitoring of E-STOP, Safety Gates, Feedback Loop

MFR: PILZ

MFR #: 774131

Item #: 1596951

Available to Order

$1106.00 each

Availability

Location	Available Qty

Safety Relay, 1/2-Channel Wiring with Detection of Shorts Across Contacts, 7 N/O, 2 N/C, 2 SC, Automatic/Monitored Start, UB = 24 VDC, 90mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

PILZ

Safety Relay, 1/2-Channel Wiring with Detection of Shorts Across Contacts, 7 N/O, 2 N/C, 2 SC, Automatic/Monitored Start, UB = 24 VDC, 90mm, Screw Terminals Integrated, Monitoring of E-STOP, Safety Gates

MFR: PILZ

MFR #: 774605

Item #: 182632

Available to Order

$1230.00 each

Availability

Location	Available Qty

Configurable Safe Small Controllers PNOZmulti 2, Base Unit, Expandable, 20 Safe Digital Inputs, 4 Safe Semiconductor Outputs

PILZ

Configurable Safe Small Controllers PNOZmulti 2, Base Unit, Expandable, 20 Safe Digital Inputs, 4 Safe Semiconductor Outputs

MFR: PILZ

MFR #: 772100

Item #: 1249753

Available to Order

$1386.00 each

Availability

Location	Available Qty

Contact Expansion, 1/2-Channel Wiring Without Detection of Shorts Across Contacts, 4 N/O, UB 24 VDC, 22.5mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

PILZ

Contact Expansion, 1/2-Channel Wiring Without Detection of Shorts Across Contacts, 4 N/O, UB 24 VDC, 22.5mm, Plug-in Screw Terminals, Contact Block for Contact Expansion in Connection with Safety-Related Control Components

MFR: PILZ

MFR #: 777587

Item #: 1618524

Available to Order

$372.00 each

Availability

Location	Available Qty

50-W ground-check termination assembly with convenient mounting holes and screw terminals.

Littelfuse

SE-TA12A Relay Series Termination Assembly - 12V

MFR: Littelfuse

MFR #: SE-TA12A

UPC: 079458989489

Item #: 482948

Available to Order

$2046.95 each

Availability

Location	Available Qty

Used when replacing an Atkinson Omser II with an SE-130-Series Monitor.

Littelfuse

PMA-8 PMA Series Enc Panel Adaptor Se-134/Atkinson

MFR: Littelfuse

MFR #: PMA-8

UPC: 079458978421

Item #: 1008517

Available to Order

$1775.48 each

Availability

Location	Available Qty

The SE-325 Neutral-Grounding-Resistor Monitor is used on resistance-grounded systems up to 25 kV to monitor the integrity of the neutral-to-ground path and to detect ground faults. It measures current and voltage in a transformer or generator neutral-to-ground connection and continuity of the neutral-grounding resistor (NGR). The SE-325 coordinates these three measurements to detect a loose connection, corrosion, ground fault, or NGR failure, and provides one alarm or trip output contact.

Littelfuse

SE-325 SE 325 Series Neutral-Grounding-Resistor Monitor

MFR: Littelfuse

MFR #: SE-325

UPC: 079458988079

Item #: 1280879

Available to Order

$6309.38 each

Availability

Location	Available Qty

Remote indication and reset for the SE-330, SE-330AU, and SE-330HV. NEMA 4 and NEMA 13 rating. Standard 22-mm mounting.

Littelfuse

RK-332 RK 332 Series Remote Indication And Reset Assembly

MFR: Littelfuse

MFR #: RK-332

UPC: 079458987836

Item #: 1204732

Available to Order

$1842.23 each

Availability

Location	Available Qty

The EFCT series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.

Littelfuse

EFCT-1 Relay Series Xfmr Current 100 1 Ef 3.25In Id

MFR: Littelfuse

MFR #: EFCT-1

UPC: 079458977684

Item #: 534791

Available to Order

$2864.50 each

Availability

Location	Available Qty

The SE-330 is an advanced ground-fault and neutral-grounding resistor monitoring relay that is compliant with Rule10-302 of the 2018 Canadian Electrical Code Part I (CE Code). It measures neutral current, neutral-to-ground voltage, and neutral-to-ground resistance. It provides continuous monitoring of the neutral-to-ground path to verify that the neutral-grounding resistor (NGR) is intact and that it has not been bypassed or shorted. An open NGR renders currentsensing ground-fault protection inoperative and could result in a false belief that the system is functioning properly. A shorted NGR results in higher-than-expected ground-fault current. The SE-330 can be used with low- and medium-voltage transformers and generators with low- or high-resistance grounding used in processing, manufacturing, chemical, pulp and paper, petroleum, and water-treatment facilities. For high-voltage applications, use the SE-330HV. For applications that require conformance to Australian standards, use the SE-330AU.

Littelfuse

SE-330-SMA SE 330 Series Se-330 Surface-Mount Adaptor

MFR: Littelfuse

MFR #: SE-330-SMA

UPC: 079458988604

Item #: 1204733

Available to Order

$1321.00 each

Availability

Location	Available Qty

The EFCT series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.

Littelfuse

EFCT-26 Relay Series Xfmr Current 100:1 Ef 26Mm Id

MFR: Littelfuse

MFR #: EFCT-26

UPC: 079458977721

Item #: 866232

Available to Order

$1793.60 each

Availability

Location	Available Qty

50-W ground-check termination assembly with convenient mounting holes and wire leads.

Littelfuse

SE-TA6A-WL Relay Series Gf/Gc Term Assy 5.6V 50W Tc Wl

MFR: Littelfuse

MFR #: SE-TA6A-WL

UPC: 079458989557

Item #: 656337

Available to Order

$2349.20 each

Availability

Location	Available Qty

Used On Systems Up To 15 kV.

Littelfuse

ER-15KV ER-15KV Series Res Sensing 100K 15000V L-L

MFR: Littelfuse

MFR #: ER-15KV

UPC: 079458977905

Item #: 501382

Available to Order

$10080.30 each

Availability

Location	Available Qty

MOTOR OVERLOAD PROTECTION 8000

Littelfuse

MP8000 MP8000 Series Motor Overload Protection 8000

MFR: Littelfuse

MFR #: MP8000

UPC: 079458046113

Item #: 719830

Available to Order

$2952.45 each

Availability

Location	Available Qty

No Image Available

Littelfuse

ECSL41AD SSAC Current Sensor

MFR: Littelfuse

MFR #: ECSL41AD

UPC: 079458992724

Item #: 1238971

Available to Order

$627.83 each

Availability

Location	Available Qty

No Image Available

Littelfuse

SE-330-07-00 SE 330 Series Ngr Mon.,Univ.,Sc Fiber & Rj45,61850

MFR: Littelfuse

MFR #: SE-330-07-00

UPC: 079458812848

Item #: 1528349

In Stock - Check Availability

$25296.25 each

Availability

Location	Available Qty

No Image Available

Littelfuse

SE-330-04-00 SE 330 Series Ngr Mon.,Univ., Ethernet Sc Fiber & Rj45

MFR: Littelfuse

MFR #: SE-330-04-00

UPC: 079458812473

Item #: 1526332

Available to Order

$23538.35 each

Availability

Location	Available Qty

The PGR-3100 indicates the presence of voltage on each phase of a three-phase system. The LEDs on the panel illuminate when voltage is present. When a ground-fault occurs, the voltage on the faulted phase reduces to ground potential, causing the LEDs for the faulted phase to dim. On a resistance grounded or ungrounded system the LEDs for the unfaulted phases become brighter. Ungrounded ac systems are required by the National Electrical Code (NEC) Article 250.21(B) and the Canadian Electrical Code Part 1, Section 10-106 (2) to have ground detectors, such as the PGR-3100, installed on the system. External potential transformers (PTs) can be used to step down system voltage, allowing the PGR-3100 to be applied to any system voltage. PTs are not required for system voltages up to 600 Vac.

Littelfuse

PGR-3100 PGR 3100 Series Ground Fault Indication System W/ Leds

MFR: Littelfuse

MFR #: PGR-3100

UPC: 079458177312

Item #: 952482

Available to Order

$2699.93 each

Availability

Location	Available Qty

The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LEDs indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket. Operation: Alternating: When the rotary switch is in the alternate position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position A to lock Load A or position B to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate. Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the units input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation. Duplexing (Cross Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously. The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated.

Littelfuse

ARP63S SSAC Alternating Relay

MFR: Littelfuse

MFR #: ARP63S

UPC: 079458991505

Item #: 584614

Available to Order

$475.63 each

Availability

Location	Available Qty

Panel-mounted analog am meter displays the Ground-Fault Current as a percentage of the set-point.

Littelfuse

PGA-0500 Relay Series Analog Percent Meter

MFR: Littelfuse

MFR #: PGA-0500

UPC: 079458178173

Item #: 1022868

Available to Order

$1979.63 each

Availability

Location	Available Qty

The DCSA Series is a loop-powered, linear output current transducer that provides an output that is directly proportional to the RMS AC current passing through the LCSC10T12 sensor. The DCSA provides either an analog current or voltage: 4 - 20 mA, 1 to 5VDC, or 2 to 10VDC. Each unit is factory calibrated for monitoring (with the LCSC10T12 connected) in one of four ranges; 0 - 5, 0 - 10, 0 - 20, or 0 - 50A. Zero and span adjustments allow field calibration if needed. The DCSA mounts on both DIN 1 and DIN 3 rails.

Littelfuse

DCSA50 SSAC Ac Current Transducer

MFR: Littelfuse

MFR #: DCSA50

UPC: 079458992083

Item #: 1534386

Available to Order

$528.35 each

Availability

Location	Available Qty

The SE-330 is an advanced ground-fault and neutral-groundingresistor monitoring relay that is compliant with Rule10-302 of the 2018 Canadian Electrical Code Part I (CE Code). It measures neutral current, neutral-to-ground voltage, and neutral-to-ground resistance. It provides continuous monitoring of the neutral-to-ground path to verify that the neutral-grounding resistor (NGR) is intact and that it has not been bypassed or shorted. An open NGR renders currentsensing ground-fault protection inoperative and could result in a false belief that the system is functioning properly. A shorted NGR results in higher-than-expected ground-fault current. The SE-330 can be used with low- and medium-voltage transformers and generators with low- or high-resistance grounding used in processing, manufacturing, chemical, pulp and paper, petroleum, and water-treatment facilities. For high-voltage applications, use the SE-330HV. For applications that require conformance to Australian standards, use the SE-330AU.

Littelfuse

SE-330-03-01 SE 330 Series Ngr Monitor Nc Ethernet

MFR: Littelfuse

MFR #: SE-330-03-01

UPC: 079458988420

Item #: 1502618

Available to Order

$23538.35 each

Availability

Location	Available Qty

The ISS-105 is a smart five-channel intrinsically safe relay and pump controller. The ISS-105 can be configured for a wide variety of applications including alternating or non-alternating duplex, duplex separate pump stop (SPS), triplex and quadplex applications. It can be set up for pump-up or pump-down applications or can be used as a five-channel relay. The ISS-105 has a long list of features that are needed for multiple pump applications. The ISS-105 can indicate low, high and out-of-sequence alarms. If an out-of-sequence alarm occurs, the skipped pump(s) will be started as intended. The Model ISS-105 can be set up to do non-alternating control, alternating control and alternating control with one non-alternating pump. The non-alternating pump is intended for use with an emergency or jockey pump. The ISS-105 can start an emergency pump once every 50 cycles to keep it working freely. Using the built-in DIP switches, individual pumps can be disabled when taken out of service for repair or maintenance.

Littelfuse

ISS-105 Symcom 5-Ch Intrinsically-Safe Switch

MFR: Littelfuse

MFR #: ISS-105

UPC: 079458994315

Item #: 1569571

Available to Order

$2651.05 each

Availability

Location	Available Qty

The SE-330 is an advanced ground-fault and neutral-groundingresistor monitoring relay that is compliant with Rule10-302 of the 2018 Canadian Electrical Code Part I (CE Code). It measures neutral current, neutral-to-ground voltage, and neutral-to-ground resistance. It provides continuous monitoring of the neutral-to-ground path to verify that the neutral-grounding resistor (NGR) is intact and that it has not been bypassed or shorted. An open NGR renders currentsensing ground-fault protection inoperative and could result in a false belief that the system is functioning properly. A shorted NGR results in higher-than-expected ground-fault current. The SE-330 can be used with low- and medium-voltage transformers and generators with low- or high-resistance grounding used in processing, manufacturing, chemical, pulp and paper, petroleum, and water-treatment facilities. For high-voltage applications, use the SE-330HV. For applications that require conformance to Australian standards, use the SE-330AU.

Littelfuse

SE-330-03-00 SE 330 Series Neutral-Grounding-Resistor Monitor Ether

MFR: Littelfuse

MFR #: SE-330-03-00

UPC: 079458988413

Item #: 1445479

Available to Order

$23538.35 each

Availability

Location	Available Qty

The PC-102 series is a dual-channel switch that provides dual protection against seal failures and over-temperature in submersible pumping applications. The relays have two form-C isolated output relays and two LEDs, which illuminate when each associated output relay is energized. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays will change state. The sensitivity for the over-temperature detector can be set to 4k Ohms with use of the DIP switches.

Littelfuse

PC-102CICI-LT Symcom 2-Channel Leak/Temp Detector/1

MFR: Littelfuse

MFR #: PC-102CICI-LT

UPC: 079458997699

Item #: 595113

Available to Order

$758.33 each

Availability

Location	Available Qty