Automation Switches | Crescent Electric Supply Company

Intermatic

The heavy duty mechanical time switch is designed for industrial, commercial and residential applications. Features a high horsepower rating that is ideal for loads up to 40 amps resistive from 120-volts and direct 24-hour time switch control of most loads. All models are equipped with one "ON" and one "OFF" tripper. The unit contains a 1-circuit standard On/Off 1NO/1NC (can be wired SPDT) 40 Amps, 4000 watt capacity, 208-277 VAC 60 Hz.

T106R T100 Electro Mechanical Timer Switch, 24 hr Setting, 208 to 277 V AC, 5 hp, 1CO 1 Form C SPDT Contact, 1 Poles

MFR: Intermatic

MFR #: T106R

UPC: 078275104280

Item #: 184682

Intermatic

The NEMA3R BEIGE STL CASE 125V SPST TIME SW These heavy-duty Mechanical Time Switches are designed for commercial, industrial and residential applications and have the highest motor load ratings in the industry. They provide up to 12 ON/OFF operations each day with a minimum ON/OFF time of 1 hour. This model is designed to turn OFF a gas fired swimming pool heater approximately 20 minutes before the filter pump shuts down. This eliminates the problem of pounding and knocking due to overheated water, reduces scale and lime deposits and extends the service life of the heater.

T101R201 T100 Heavy Duty Mechanical Timer Switch, 24 hr Setting, 120 V AC, 2 hp, 1NO 1 Form A SPST Contact, 1 Poles

MFR: Intermatic

MFR #: T101R201

UPC: 078275000063

Item #: 670043

Intermatic

The 120V 1HP PANEL MT TIMER These compact Electronic Timers are specially suited for applications where equipment needs to be cycled ON and OFF up to 8 times per day, and where automatic operation of the equipment requires occasional override by someone other than a qualified service professional. They offer rugged construction, resistance to surges and humidity, operate between wide temperature extremes and come with a 5 year service life replaceable lithium battery. A light indicator illuminates when the timer is in the ON position. Select feature allows timers to be continuously ON, OFF or in AUTO mode. PB300EK Series Electronic Timer kits are designed for applications where PB Series Mechanical Timers need to be replaced. The connected load must not exceed the ratings of these timers. The kits contain all the necessary hardware for a speedy repair or exchange.

PB373E PB300 Electronic Timer, 7 days Setting, 120 V AC, 1 hp, 1NO 1 Form A SPST Contact, 1 Poles

MFR: Intermatic

MFR #: PB373E

UPC: 078275065642

Item #: 346836

Intermatic

The Electronic Auto-Off Timer 5/10/15/30 Minute With HOLD Ivory This Series Decorator Electronic Auto Shut-OFF Timers provide silent operation in time ranges from 5 minutes to 12 hours.

EI200 Auto Shut-Off In-Wall Electronic Countdown Timer, 5/10/15/30 min Setting, 120 V AC, 1/2 hp, 1NO 1 Form A SPST Contact, 1 Poles

MFR: Intermatic

MFR #: EI200

UPC: 078275095182

Item #: 78751

Intermatic

These portable outdoor timers are specially designed to control the filter pump of a portable pool or spa, but they can also be used to turn ON and OFF outdoor decorations, engine block heaters and other appliances, indoors or outdoors.

P1131 P1100 Portable Timer, 24 hr Setting, 120 V AC, 1 hp, 1NO 1 Form A SPST Contact, 1 Poles

MFR: Intermatic

MFR #: P1131

UPC: 078275060982

Item #: 151644

Intermatic

The Portable 24Hr Two Circuit Above Ground Pool Timer w/120VAC Plug & GFCI These portable two-circuit fountain timers incorporate a plug in for a timed circuit (normally used for a pool pump) and a plug-in for a live circuit (typically used for a pool light). GFCI protected circuits and a three-prong grounded plug for the time switch supply are also built-in.

P1261P P1200 2-Circuit Portable Timer, 24 hr Setting, 120 V AC, 1 hp, 1NO 1 Form A SPST Contact, 1 Poles

MFR: Intermatic

MFR #: P1261P

UPC: 078275067530

Item #: 219525

Intermatic

WG1570-10D Motor, 125 V AC, 60 Hz, 3 W, For Use With T101, T103, T105 Time Switch

MFR: Intermatic

MFR #: WG1570-10D

UPC: 078275020115

Item #: 63679

Intermatic

WG1573-10D Clock Motor, 208 to 277 V AC, 60 Hz, 3 W, For Use With T100, T102, T104, T170, T180, T100R201, T1400, T100-20, T100R301, and WH10, WH30, WH40 Series Mechanical Time Switch

MFR: Intermatic

MFR #: WG1573-10D

UPC: 078275020122

Item #: 168344

Intermatic

The NEMA 1 - 250 V DPST w/ External Manual Override Switch "Little Gray Box" This Mechanical Water Heater Time Switch Regulates Electric Water Heaters. Daily Operation can be set with Trippers from 1 to 23 Hours

WH40 Mechanical Timer Switch, 1 hr Setting, 208 to 277 V AC, 2 hp, 5 hp, DPST Contact, 2 Poles

MFR: Intermatic

MFR #: WH40

UPC: 078275007406

Item #: 86663

Intermatic

FF60MP Timer Plate, 1/2/3 Phase, -40 to 155 deg F, For Use With Commercial, FF60M, FF360M and FF460M Series 60 min Spring Wound Timer, Metal, Silver

MFR: Intermatic

MFR #: FF60MP

UPC: 078275023253

Item #: 968621

Intermatic

WG1570-10 Time Clock Motor, 120 V AC, 60 Hz, 3 W, For Use With T100, T170, T180, T100R201, T100R301, WH30 and WH40 Series Timer Switch

MFR: Intermatic

MFR #: WG1570-10

UPC: 078275119116

Item #: 85346

Killark

FXCS Series - Aluminum Dead-End Momentary Contact Single Push Button Control Station - Factory Sealed - Black Button With Nameplate To Be Specified - Hub Size 3/4 Inch - 1NO/1NC Contact Rating

SEAL-X FXCS-2B3 Dead End Factory Sealed Single Push Button Control Station With Splice Box, Cover, 600 V AC, 1NO-1NC Contact, 1 Operators, NEMA 3/7CD/9EFG NEMA Rating

MFR: Killark, a Hubbell affiliate

MFR #: FXCS-2B3

UPC: 783936201160

Item #: 56194

Intermatic

T2006 T2000 Mechanical Timer Switch, 2 to 22 hr, 7 days Setting, 208 to 277 V AC, 1 hp, 1CO 1 Form C SPDT Contact, 1 Poles

MFR: Intermatic

MFR #: T2006

UPC: 078275460218

Item #: 277497

Killark

Killark GO SERIES Operators are a component use in conjunction with a Hazardous Location enclosure to provide control solutions in for; START/STOP Motor Functions, LED Pilot Light Indications and more. Utilized in Class 1 Division 1 & 2, Class 1 Zone 1 & 2 areas for indoor and outdoor use. UL Listed and CSA Certified.

MFR: Killark, a Hubbell affiliate

MFR #: GO-8673-BJJ

UPC: 783936079974

Item #: 664358

Killark

Killark GO SERIES Operators are a component use in conjunction with a Hazardous Location enclosure to provide control solutions in for; START/STOP Motor Functions, LED Pilot Light Indications and more. Utilized in Class 1 Division 1 & 2, Class 1 Zone 1 & 2 areas for indoor and outdoor use. UL Listed and CSA Certified.

MFR: Killark, a Hubbell affiliate

MFR #: GO-8673-BJK

UPC: 783936079950

Item #: 739963

Killark

XCS Series- Cover with Device - Momentary Contact Two Mini Red-Green Push Buttons And Red LED Pilot Light

XCS-0A15D XCS Series Control Station Cover Assembly, 110 VAC/VDC, 600 VAC, 10 A, 1NO-1NC Contact, 3 Operators, NEMA 7/9 NEMA Rating

MFR: Killark, a Hubbell affiliate

MFR #: XCS-0A15D

UPC: 783936960333

Item #: 633935

Intermatic

156T3085A Skipper Screw, For Use With T170/P171/T1400/T1800/WH Series Timer Control Switches

MFR: Intermatic

MFR #: 156T3085A

UPC: 078275600713

Item #: 255588

Killark

Killark GO SERIES Operators are a component use in conjunction with a Hazardous Location enclosure to provide control solutions in for; START/STOP Motor Functions, LED Pilot Light Indications and more. Utilized in Class 1 Division 1 & 2, Class 1 Zone 1 & 2 areas for indoor and outdoor use. UL Listed and CSA Certified.

MFR: Killark, a Hubbell affiliate

MFR #: GOL52A3

UPC: 783936226347

Item #: 631635

KILLARK

GOL3R SZ G Extended Indicator Pilot Light, 6 in L x 1-35/64 in W x 1-35/64 in H, Red

MFR: Killark, a Hubbell affiliate

MFR #: GOL3R

UPC: 783936226217

Item #: 1145445

KILLARK

FXCS Series - Aluminum Momentary Contact Double Push Button Cover With Device - Factory Sealed - Two Black Buttons With Nameplates To Be Specified - 2NO/2NC Contact Rating

SEAL-X FXCS-0B7 FXCS Factory Sealed Control Station With Cover, 600 V AC, 2NO-2NC Contact, NEMA 3/7/9 NEMA Rating

MFR: Killark, a Hubbell affiliate

MFR #: FXCS-0B7

UPC: 783936200514

Item #: 1144043

Intermatic

133T773A Replacement Snap Switch

MFR: Intermatic

MFR #: 133T773A

UPC: 078275102453

Item #: 424814

Intermatic

133T701A Replacement Snap Switch

MFR: Intermatic

MFR #: 133T701A

UPC: 078275102422

Item #: 939249

Killark

Killark GO SERIES Operators are a component use in conjunction with a Hazardous Location enclosure to provide control solutions in for; START/STOP Motor Functions, LED Pilot Light Indications and more. Utilized in Class 1 Division 1 & 2, Class 1 Zone 1 & 2 areas for indoor and outdoor use. UL Listed and CSA Certified.

MFR: Killark, a Hubbell affiliate

MFR #: GO5-4H0H N34

UPC: 783936221823

Item #: 1084818

Killark

FXCS Series - Aluminum Feed-Thru Momentary Contact Double Push Button Control Station - Factory Sealed - Red And Green Buttons With "Start"Nameplates - Hub Size 3/4 Inch - 2NO/2NC Contact Rating

SEAL-X FXCS-5B4-U Feed-Through Double Factory Sealed Push Button Control Station With Splice Box, 600 V AC, 2NO-2NC Contact, 2 Operators, NEMA 3/7CD/9EFG NEMA Rating

MFR: Killark, a Hubbell affiliate

MFR #: FXCS-5B4-U

UPC: 783936202297

Item #: 864445

Killark

G SERIES - ALUMINUM SHORT MAINTAINED CONTACT 3-POSITION SELECTOR SWITCHOPERATOR - "HAND - OFF - AUTO"/BLANK NAMEPLATE - 1NO/1NC CONTACT RATING

Killark GO SERIES Operators are a component use in conjunction with a Hazardous Location enclosure to provide control solutions in for; START/STOP Motor Functions, LED Pilot Light Indications and more. Utilized in Class 1 Division 1 & 2, Class 1 Zone 1 & 2 areas for indoor and outdoor use. UL Listed and CSA Certified.

MFR: Killark, a Hubbell affiliate

MFR #: GO25-3C3G

UPC: 783936223063

Item #: 201878

Killark

Killark GO SERIES Operators are a component use in conjunction with a Hazardous Location enclosure to provide control solutions in for; START/STOP Motor Functions, LED Pilot Light Indications and more. Utilized in Class 1 Division 1 & 2, Class 1 Zone 1 & 2 areas for indoor and outdoor use. UL Listed and CSA Certified.

MFR: Killark, a Hubbell affiliate

MFR #: GOL53C3

UPC: 783936226354

Item #: 631631

Killark

Killark GO SERIES Operators are a component use in conjunction with a Hazardous Location enclosure to provide control solutions in for; START/STOP Motor Functions, LED Pilot Light Indications and more. Utilized in Class 1 Division 1 & 2, Class 1 Zone 1 & 2 areas for indoor and outdoor use. UL Listed and CSA Certified.

MFR: Killark, a Hubbell affiliate

MFR #: GO113 N34

UPC: 783936220130

Item #: 477331

Appleton

SMPBU1Q Heavy Duty Factory Sealed Universal Non-Illuminated Pushbutton With 1/2 in to 3/4 in Enlarger and Emergency Stop Nameplate, 1NO-1NC Contact, Red

MFR: Appleton Electric

MFR #: SMPBU1Q

UPC: 781381633697

Item #: 134013

Appleton

Padlockable Guard; 49.5 mm Width x 67.6 mm Depth x 26 mm Height, Stainless Steel Body and Plastic Cover

MFR: Appleton Electric

MFR #: UPLD1S

UPC: 781381268424

Item #: 442050

Appleton

NBN-WB Rectangular Button With Weather Boot, For Use With Intraground Series N1 and N2 Control Stations, Plastic

MFR: Appleton Electric

MFR #: NBN-WB

UPC: 781381468138

Item #: 184526

Appleton

UniCode; Pushbutton; Momentary, 1 NC, 1 NO, 600 Volt AC, 125 Volt DC, Fiberglass Reinforced Thermoset Polyester, Black

MFR: Appleton Electric

MFR #: UCPB1BL

UPC: 781381806978

Item #: 341573

Appleton

TR-4 Pilot Light Transformer, For Use With EFD/EFDB and EDS Series Factory Sealed Control Stations, 120 V AC Lamp, 440 V AC Primary Voltage

MFR: Appleton Electric

MFR #: TR-4

UPC: 781381121620

Item #: 619247

Appleton

Cover; For 2 Device Series Factory Sealed Control Station and Class I, Division 2, Groups B, C, D, Class I, Zone 2, Group IIC, NEMA 3, 3R, 4, 4X Enclosure

MFR: Appleton Electric

MFR #: UCC2

UPC: 781381806374

Item #: 341572

Appleton

Selector Switch with Cover Assembly, 600 VAC, 10 A, 2NO 2NC, Malleable Iron

MFR: Appleton Electric

MFR #: EDKB345

UPC: 781381673914

Item #: 154973

Appleton

PUSHBUTTON SW-COVER

MFR: Appleton Electric

MFR #: EFKBU1

UPC: 781381634540

Item #: 156735

Appleton

AEPTRE Short Barrel Illuminated Pushbutton, 3/4 in, 1NO-1NC Contact, Red

MFR: Appleton Electric

MFR #: AEPTRE

UPC: 781381915632

Item #: 984927

Appleton

HSWINS Replacement Part, For Use With Unicode and Contender Series NEMA 3/3R/4/4X/IP66 2 x 4 in Control Station

MFR: Appleton Electric

MFR #: HSWINS

UPC: 781381813044

Item #: 220637

Appleton

AEPRC Single Short Barrel Non-Illuminated Pushbutton, 1NC Contact, Red

MFR: Appleton Electric

MFR #: AEPRC

UPC: 781381914871

Item #: 177648

Appleton

UCPLGDC Contender UniCode Pilot Light With Blank Nameplates, 12/24 V DC

MFR: Appleton Electric

MFR #: UCPLGDC

UPC: 781381813280

Item #: 1037776

Appleton

Push Button, 1NO, Green, 600 VAC, 10 A

MFR: Appleton Electric

MFR #: AEPGA

UPC: 781381912051

Item #: 180188

Appleton

Pushbutton SwCover Assembly

MFR: Appleton Electric

MFR #: EFKBU2

UPC: 781381634564

Item #: 116138

Appleton

SSBA12Q Intraground ECS Explosionproof Non-Illuminated Selector Switch Assembly, 1/2 in, 1NO-1NC Contact, Knob Operator

MFR: Appleton Electric

MFR #: SSBA12Q

UPC: 781381634335

Item #: 181507

Appleton

EFK Series Front Cover; Emergency Stop Legend

MFR: Appleton Electric

MFR #: EFKBUM1

UPC: 781381701068

Item #: 229082

Appleton

Single Lid Spring Door Replacement Assembly; For U-Line; Factory Sealed 20 Amp EFSR-2023 and EFSR-20232 Aluminum Receptacles

MFR: Appleton Electric

MFR #: ULSCA

UPC: 781381742788

Item #: 191681

Appleton

Cover Ring Kit ULine Mall

MFR: Appleton Electric

MFR #: ULSCM

UPC: 781381742771

Item #: 2749

Appleton

Push Button, 1NO 1NC, Green/Red, 250 VAC, 8 A

MFR: Appleton Electric

MFR #: AEPDGREL

UPC: 781381912020

Item #: 226956

Appleton

AEPTAE Short Barrel Illuminated Pushbutton, 3/4 in, 1NO-1NC Contact, Amber

MFR: Appleton Electric

MFR #: AEPTAE

UPC: 781381915151

Item #: 984926

Appleton

UCPBMRE Contender UniCode Non-Illuminated Pushbutton Operator With Blank Nameplates, Red

MFR: Appleton Electric

MFR #: UCPBMRE

UPC: 781381813259

Item #: 881846

Filters