Testing and Measuring Instruments

Showing 1 - 48 of 99 Items
Filters Clear Filters
expand_less Brand (2)
+ Show 21 More
expand_less Ways to Shop
  • Amprobe
  • Panduit
Amprobe
Designed for safe, non-contact voltage detection, Amprobe's reliable volt tester, this Non-Contact Volt Probe doesnt require much budget or demand much space. This volt tester fit conveniently in a shirt pocket, tool belt or pouch.
MFR: Fluke
MFR #: VP-440
UPC: 095969369312
Item #: 82897
In Stock -
$75.65 each
Availability
Location Available Qty
Amprobe
Easily check and confirm proper wiring of electrical receptacles with this Receptacle Tester. Quickly confirm that GFCI breakers are properly wired for protection.
MFR: Fluke
MFR #: ST-102B
UPC: 095969625005
Item #: 57075
Available to Order
$39.27 each
Availability
Location Available Qty
Amprobe
If an industrial or utility testing application demands a higher level of safety, reach for this CAT IV rated Clamp Meter, the ACDC-3400 IND. Including true-rms sensing for accuracy this clamp on meter's extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple.
MFR: Fluke
MFR #: ACDC-3400-IND
UPC: 095969492683
Item #: 411689
Available to Order
$1114.74 each
Availability
Location Available Qty
Amprobe
ACD-10-PLUS AC/DC Digital Clamp Multimeter for Capacitance and Frequency
MFR: Fluke
MFR #: ACD-10-PLUS
UPC: 095969417457
Item #: 133310
Available to Order
$211.00 each
Availability
Location Available Qty
Amprobe
AM-530 True-RMS Electrical Contactor Digital Multimeter
MFR: Fluke
MFR #: AM-530
UPC: 095969600392
Item #: 15067
Available to Order
$200.81 each
Availability
Location Available Qty
Amprobe
MSHA certified and intrinsically safe, the Amprobe TIC 300 PRO High Voltage Detector Kit is a rugged, reliable, non-contact, high voltage tester for utility, industrial, and mine safety applications up to 122kV. Select low or high voltage levels to verify the presence of voltage without contacting the energized conductor. When this high voltage electricity tester is moved within close proximity of an energized line, the intuitive VolTect alert warns users with bright flashing lights and loud beeps. All functionality is available through push buttons designed for easy use with PPE gloves. Includes a universal adapter Hot Stick TIC 410A is available for voltage higher than 1500 VAC.
MFR: Fluke
MFR #: TIC-300-PRO-KIT
UPC: 095969915007
Item #: 1212703
Available to Order
$1021.60 each
Availability
Location Available Qty
Amprobe
Rugged and reliable for utility, industrial and mine safety applications, the TIC 300 PRO with VolTect is a Non-Contact, High Voltage Detector that verifies the presence of voltage in low, medium and high voltage test applications up to 122 kV without contacting the energized conductor.
MFR: Fluke
MFR #: TIC-300-PRO
UPC: 095969497695
Item #: 56324
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Panduit
VeriSafe VS-CKP4-000 AVT Connection Kit for 4 to 3/0 AWG conductors
MFR: Panduit
MFR #: VS-CKP4-000
UPC: 613056566910
Item #: 834384
Available to Order
$177.79 each
Availability
Location Available Qty
Panduit
VeriSafe VS-CKP14-6 AVT Connection Kit for 14 to 6 AWG conductors
MFR: Panduit
MFR #: VS-CKP14-6
UPC: 613056566903
Item #: 834360
Available to Order
$177.79 each
Availability
Location Available Qty
Amprobe
The Amprobe SM-20-A Sound Meter has been designed to check compliance with safety regulations and perform acoustic analysis by safety engineers, health, industrial and safety offices as well as quality control. The SM-20-A offers a PC interface. They use two different weighting filters required by the IEC651 and ANSI S1.4 Type 2 for audio filtering. The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie 94dB 1 kHz etc).
MFR: Fluke
MFR #: SM-20A
UPC: 095969499910
Item #: 1491322
Available to Order
$985.22 each
Availability
Location Available Qty
Amprobe
This Amprobe meter is a compact size CO meter for measuring and displaying the presence of carbon monoxide. This meter displays the CO level on its digital display. You can set the meter's alarm to alert when a CO level goes beyond a predetermined safety level. The User manual includes a chart of published safety levels for CO.
MFR: Fluke
MFR #: CM100
UPC: 095969463805
Item #: 1527544
Available to Order
$465.68 each
Availability
Location Available Qty
Amprobe
10,000V INSULATION RESISTANCE TESTER
MFR: Fluke
MFR #: AMB-110
UPC: 095969557016
Item #: 993217
Available to Order
$5706.74 each
Availability
Location Available Qty
Amprobe
This Amprobe High-Voltage Insulation Tester has the necessary features for professional insulation diagnostics. It features calculation of PI, and DAR parameters. The pass-fail comparison function helps to improve testing productivity. Readings are clearly displayed on a large backlit LCD display. Windows compatible PC Software and USB communications port serve for connecting the instrument to the PC and management of the recorded test data.
MFR: Fluke
MFR #: AMB-50
UPC: 095969556965
Item #: 88639
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Amprobe
5000V,ADV,INSULATION,RESISTANCE,TSTR
MFR: Fluke
MFR #: AMB-55
UPC: 095969557009
Item #: 130485
Available to Order
$4143.22 each
Availability
Location Available Qty
Amprobe
Test insulation of wires, cables, transformers and electrical motors quickly and easily with this rugged tester.
MFR: Fluke
MFR #: AMB-45
UPC: 095969366120
Item #: 55323
Available to Order
$1302.47 each
Availability
Location Available Qty
Amprobe
Instant feedback with CO2 levels, with additional temperature and humidity measurements. Built in alarm to warn against dangerous CO2 levels. This permanent mounted Air Quality Meter is designed to measure air quality compliance in critical environment controlled areas such as laboratories and production.
MFR: Fluke
MFR #: CO2-200
UPC: 095969499347
Item #: 722428
Available to Order
$715.99 each
Availability
Location Available Qty
Amprobe
Optimize the placement of solar systems and verify window efficiency. This measures solar output that is used to calculate overall energy, efficiency and placement of solar systems.
MFR: Fluke
MFR #: SOLAR-100
UPC: 095969499217
Item #: 128775
Available to Order
$563.18 each
Availability
Location Available Qty
Amprobe
This Amprobe Cable Tester is designed for testing opens, shorts and miswired cable installations. It is designed to work with various data cables and connectors. This cable tester provides a quick go no-go LED display of the wiring and connection of item under test. You can either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs and display the results.
MFR: Fluke
MFR #: LAN-1
UPC: 095969419345
Item #: 80876
Available to Order
$263.39 each
Availability
Location Available Qty
Panduit
VeriSafe 1.0 VS-AVT-CABLE-08 Replacement Cable
MFR: Panduit
MFR #: VS-AVT-CABLE-08
UPC: 613056257627
Item #: 1110038
Available to Order
$56.53 each
Availability
Location Available Qty
Amprobe
PROF DMM TRUE RMS W OPTICAL PC INTERFACE
MFR: Fluke
MFR #: 38XR-A
UPC: 095969365413
Item #: 701430
Available to Order
$557.36 each
Availability
Location Available Qty
Amprobe
TEST LEADS,ALLIGATOR CLIPS,HD DMMS, CAT IV 1000V
MFR: Fluke
MFR #: TL1500
UPC: 095969362467
Item #: 577574
Available to Order
$52.37 each
Availability
Location Available Qty
Amprobe
This Amprobe Thermometer is the professional choice for HVAC technicians, electricians, research, industrial process, and quality control, these thermometers offer dual inputs for easy super-heat and sub cool temperature measurements. To monitor and track temperatures, the multi-logging thermometers feature real-time clocks with calendar, user-selectable recording intervals, and easy data recall using up and down keys.
MFR: Fluke
MFR #: TMD-50
UPC: 095969556842
Item #: 397314
Available to Order
$197.90 each
Availability
Location Available Qty
Amprobe
Infrared Thermometer, Temperature Range: -32 To 1050 DEG C, Focus Spot Size And Distance: 20:1, Accuracy: Plus/Minus1.8 PCT, Resolution: 0.1 DEG C/0.1 DEG F, Spectral Response: 8 - 14 UM, Laser Sighting: 630 - 670 NMTR, Response Time: 250 MS, Emissivity: 0.95, Repeatability: Plus/Minus0.5 PCT Of Reading Or Plus/Minus1 DEG F (Plus/Minus0.5 DEG C), Whichever Is Greater, Display: LCD, Included: Carrying Bag, Battery And Instruction Manual, Ambient Temperature Range: 0 - 40 DEG C, Battery Type: 9V (6F22 Alkaline), Memory Recall: Min/Max, Dimensions: 138 MM Length X 53 MM Width X 169 MM Height, Battery Life: 10 HR With Laser And Backlight On, 30 HR With Laser And Backlight Off
MFR: Fluke
MFR #: IR-720
UPC: 095969614337
Item #: 939710
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Amprobe
Infrared Pocket Thermometer, Temperature Range: -30 To 500 DEG C, Focus Spot Size And Distance: 8:1 (Calculated At 80 PCT Energy), Accuracy: Plus/Minus2 DEG C, Less Than 80 PCT RH At 230 DEG C, Resolution: 0.5 DEG F/0.2 DEG C, Spectral Response: 6.5 - 18 UM, Laser Sighting: 630 - 670 NMTR, Response Time: 500 MS, Emissivity: 0.95, Repeatability: Plus/Minus1 DEG C Or Plus/Minus 0.5 PCT Of Reading, Whichever Is Greater, Safety Rating: EN 61010-1, EN 60825-1, 100 PCT FDA Compliant Laser, Class 2 Laser, Battery Type: (1) 1.5 AAA, Dimensions: 100 MM Length X 20 MM Width X 29 MM Height, Battery Life: 20 HR, EN 61326-1 EMC Compliance, CE Certified
MFR: Fluke
MFR #: IR-450
UPC: 095969642552
Item #: 54683
Available to Order
$154.24 each
Availability
Location Available Qty
Amprobe
Troubleshoot air conditioning systems quickly and accurately with this Amprobe Refrigerant Leak Detector. State of the art technology assures precise, unambiguous readings, and makes leak detection across a wide variety of refrigerants easy and quick.
MFR: Fluke
MFR #: RLD-1
UPC: 095969499200
Item #: 704363
Available to Order
$653.41 each
Availability
Location Available Qty
Amprobe
Amprobes new Swivel Clamp Meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Auto and manual ranging respectively for quick checks and precise measurements. Feature rich, measuring AC DC currents, voltage, resistance and capacitance as well as CAT III 600V safety ratings make this clamp on meter something you should swivel to see.
MFR: Fluke
MFR #: ACD-23SW
UPC: 095969563529
Item #: 322281
Available to Order
$407.46 each
Availability
Location Available Qty
Amprobe
This Amprobe Battery Tester quickly and accurately tests batteries without taking the batteries off-line. This Battery Tester features a comparator function with pass-fail indication, and speed testing of batteries up to 500Ah. Compact, light weight and simultaneously measures battery resistance and voltage up to 40V.
MFR: Fluke
MFR #: BAT-500
UPC: 095969499187
Item #: 669539
Available to Order
$2411.41 each
Availability
Location Available Qty
Amprobe
True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus Minus (1 PCT RDG + 3 LSD) For Resistance, Plus Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use
MFR: Fluke
MFR #: ACDC-52NAV
UPC: 095969556651
Item #: 607349
Available to Order
$798.94 each
Availability
Location Available Qty
Amprobe
Take this clamp meter to extremes. Most digital clamp meters have LCD screens that tend to freeze below 32 degrees (0 degrees Celcius) but the Amprobe RS-1007 PRO, an analog clamp meter can take extreme heat or cold and keep on measuring amps and volts-without problems or batteries.
MFR: Fluke
MFR #: RS-1007-PRO
UPC: 095969497725
Item #: 35794
Available to Order
$481.68 each
Availability
Location Available Qty
Amprobe
Complete with a full range of diagnostic capabilities including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter, the Amprobe Navigator Clamp On Meter serves as a first line of defense for power monitoring and verifying system conditions before deploying more specialized tools -- or incurring additional costs. Rated CAT IV 600 V/CAT III 1000 V, these clamp on meters offer a new innovative navigation system that eliminates confusing push buttons, and replaces them with a single joystick. Its all about easy and reliable measurements. Amprobes new line of Navigator Clamp On Meters feature quick, easy to use single hand selection of measurements. The joy stick control allows quick selection of measurement features on the display from MAX -MIN to power factor to AC- DC current, with many more available. Simply highlight the desired measurement feature using the joy stick and press to select. Rugged and CAT IV reliable, this clamp on meter also features, super bright backlight display, built-in jaw flashlight and over mold bodies to absorb shock -- all you need for commercial and industrial environments.
MFR: Fluke
MFR #: ACDC-54NAV
UPC: 095969556675
Item #: 160820
Available to Order
$992.49 each
Availability
Location Available Qty
Amprobe
Low Current Clamp On Ammeter, Amperage Rating: AC DC: 4 AMP, 40 AMP, Frequency Rating: 40 HZ - 400 HZ In AC, Measuring Range: 0 - 40 AMP DC Or AC Peak, Operating Temperature: 0 - 50 DEG C, Dimensions: 184 MM Length X 71 MM Width X 31 MM Height, Battery Type: 9 V, Alkaline PP3, NEDA 1604, Display: 4000 Count,10 MM High Characters, Maximum Jaw Opening: 19 MM Cable, Maximum Jaw Opening: 20 MM, Accuracy: Plus-Minus (1.3PCT + 5 Digits), Temperature coefficient: Plus-Minus 0.05PCT Of RDG-DEGC, Resolution: 1 MILAMP In 4 AMP Range, 10 MILAMP In 40 AMP Range, Autoranging: 4 AMP-40 AMP, CE Certified, CAT III 300V
MFR: Fluke
MFR #: LH41A
UPC: 095969416542
Item #: 783715
Available to Order
$1204.97 each
Availability
Location Available Qty
Amprobe
This current transformer probe measures AC or DC current. It converts high current to a low level millivolt signal for input directly into a test instrument. It can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.
MFR: Fluke
MFR #: CT235A
UPC: 095969414586
Item #: 607872
Available to Order
$519.52 each
Availability
Location Available Qty
Amprobe
Amprobe Clamp Multimeter with leakage current capability measures low AC current in the microamps. Great for applications requiring measurement of leakage and fault currents.
MFR: Fluke
MFR #: AC50A
UPC: 095969416719
Item #: 764819
Available to Order
$1031.79 each
Availability
Location Available Qty
Amprobe
User-friendly and accurate. Think safety and Amprobes ground resistance tester second. Use the on-board memory and data logging features to make your work more efficient.
MFR: Fluke
MFR #: DGC-1000A
UPC: 095969366311
Item #: 194199
Available to Order
$4480.85 each
Availability
Location Available Qty
Amprobe
True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus-Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus-Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus/Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus-Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus-Minus (1 PCT RDG + 3 LSD) For Resistance, Plus-Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus-Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use
MFR: Fluke
MFR #: ACD-50NAV
UPC: 095969556637
Item #: 158794
In Stock -
$601.02 each
Availability
Location Available Qty
Amprobe
Small size doesnt mean small features. This Amprobe Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction and CAT III 600V rating, this meter is a must-have professional troubleshooting tool for commercial electricians and electrical contractors.
MFR: Fluke
MFR #: AMP-25
UPC: 095969778787
Item #: 390952
Available to Order
$321.60 each
Availability
Location Available Qty
Panduit
VeriSafe 1.0 VS-AVT-CABLE-30 Replacement Cable
MFR: Panduit
MFR #: VS-AVT-CABLE-30
UPC: 613056364721
Item #: 977644
Available to Order
$113.14 each
Availability
Location Available Qty
Panduit
VeriSafe VS-CKP1K4/0-500 AVT Connection Kit for AWG 4/0 to 500 MCM conductors
MFR: Panduit
MFR #: VS-CKP1K4/0-500
UPC: 613056812994
Item #: 1284054
Available to Order
$441.08 each
Availability
Location Available Qty
Amprobe
Contact And Non-Contact Tachometer, Range: Surface Speed (Contact): 0.1 - 1999 M MINT, 0.4 - 6550 FT MINT, Rpm Range: Rotation (Non-Contact): 1 - 99999 RPM: Rotation (Contact): 19 - 19999 RPM, Accuracy: Plus- Minus (0.02 PCT V Reading Plus- Minus1 Digit), Working Distance: 600 MM Maximum (Optical), Parts Included: 6 Adapters, Carrying Case, Reflective Tapes, Batteries And User Manual, Measuring Units: M, FT, IN, Dimensions: 175 MM Length X 60 MM Width X 28 MM Height, Battery: (2) AA1.5 V LR6 (Alakaline) Or Rechargeable, Operating Temperature: 0 - 50 DEG C, CE Certified
MFR: Fluke
MFR #: TACH20
UPC: 095969463881
Item #: 325700
Available to Order
$1113.28 each
Availability
Location Available Qty
Amprobe
Contact And Non-Contact Tachometer, Range: Surface Speed (Contact): 1 - 9999.9 M/MINT, 3 - 30,000 FT-MINT, 1 - 10,000 YD-MINT, Resolution: RPM Unit: 0.001,0.01,0.1,1, M-MINT Unit: 0.0001,0.001,0.01,0.1, Ft-MINT Unit: 0.0001, 0.001, 0.01, 0.1: YD-MINT Unit: 0.0001, 0.001, 0.01, 0.1, Rpm Range: Rotation (Non-Contact): 10 - 99999 RPM Rotation (Contact): 10 - 19999 RPM, Accuracy: Plus- Minus (0.1 PCT Of RDG + 2 Digit), Display: LCD With 15 MM Height X 33 MM Width, Working Distance: 5 - 30 CM (Non Contact), Parts Included: Meter, 9 V Battery, Cone And Funnel Contact Tips, Reflective Tape And Users Manual, Measuring Units: M, FT, YD, Dimensions: 266.6 MM Length X 177.8 MM Width X 81.28 MM Height, Battery: 9 V, Power Consumption: 5 MICAMP (Idle), 18 MILAMP (Measurement), Operating Temperature: 0 - 50 DEG C, CE Certified
MFR: Fluke
MFR #: TACH-10
UPC: 095969556699
Item #: 774607
Available to Order
$392.91 each
Availability
Location Available Qty
Amprobe
Specifically designed for electrical, HVAC, mechanical, automotive applications with a temperature measurement range of 14 F to 932 F (-10 C to 500 C). Portable, ergonomic, and easy to operate, allows for quick and accurate identification of temperature related issues for electrical connections and motors, HVAC functionality and performance, and heat loss spots on the insulation around buildings to save energy costs.
MFR: Fluke
MFR #: IRC-110
UPC: 095969853835
Item #: 788040
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Amprobe
This Anemometer with Flexible Precision Vane is ideal for HVAC technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems. It offers numerous functionsuse it to check air velocity FPM (feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement location flexibility. Switch between C and F. Input the area of airflow measurement to gain accurate air velocity results. Measure an air flow source for a continuous moving average for up to two hours. Determine minimum, maximum and average readings from a single point air source. Large dual display allows views of both air flow and velocity measurements plus temperature. Long extended flexible cord for remote vane access capabilities. All the measurements can be output to a computer for charting or analysis by optional model TM-SWA software and RS232 cable. Shipped in a deluxe hard carry case to protect and transport your Anemometer.
MFR: Fluke
MFR #: TMA10A
UPC: 095969398886
Item #: 421277
Available to Order
$672.33 each
Availability
Location Available Qty
Amprobe
This Amprobe Hot Wire anemometer technology eliminates the use of bearings and rotating parts. Because of this fact the meter is durable and provides good and stable accuracy of the measurements. Used for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems.
MFR: Fluke
MFR #: TMA-21HW
UPC: 095969556910
Item #: 333274
Available to Order
$959.02 each
Availability
Location Available Qty
Amprobe
This Amprobe Mini Vane Anemometer is a compact, pocket-sized tool for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems.
MFR: Fluke
MFR #: TMA5
UPC: 095969516150
Item #: 129392
Available to Order
$392.91 each
Availability
Location Available Qty
Amprobe
Use with all models of clamp meters. It enables the user of a clamp meter to measure the current on a 2-wire or 3-wire power cord to 15A without having to cut off the plug and separate the conductors, or opening electrical boxes on 120V lines. Includes a 10X current multiplier loop for increased sensitivity and accuracy of low-current measurements.
MFR: Fluke
MFR #: ELS2A
UPC: 095969414852
Item #: 172992
Available to Order
$40.52 each
Availability
Location Available Qty
Amprobe
This rugged and reliable clamp meter is designed for professional electrician and technician that need a fast responding, feature packed, go-to clamp meter. This meter offers a complete range of measuring functions for both HVAC and electrical applications. This modern Clamp Meter features a large low-light backlit LCD dual display for dimly lit areas and is capable of simultaneously displaying voltage and amperage to perform voltage drop tests. This meter offers TRMS, low pass filter, in-rush current, frequency, resistance, capacitance, temperature, DC micro-Amps, Amp-tip and non-contact voltage detection.
MFR: Fluke
MFR #: ACD-14-PRO
UPC: 095969806275
Item #: 557457
Available to Order
$446.76 each
Availability
Location Available Qty
Amprobe
This Amprobe Heavy Duty Multimeter is designed for professional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use applications. It's made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts. Built of tough, fire-retardant thermoplastic resistant to grease and chemical spills, with all sensitive components shock-mounted for a drop resistant to at least eight feet. This meter has an extended voltage measurement capability of 1500V DC and 1000V AC, unmatched by any other line of digital multimeters. The extended voltage ranges can withstand transients up to 12 kV.
MFR: Fluke
MFR #: HD110C
UPC: 095969353250
Item #: 380968
Available to Order
$522.43 each
Availability
Location Available Qty
Amprobe
The ultimate electronic component verifier measures inductance, capacitance, resistance, transistors, diodes and microwave diodes.
MFR: Fluke
MFR #: LCR55A
UPC: 095969414753
Item #: 588394
Available to Order
$624.30 each
Availability
Location Available Qty