Testing and Measuring Instruments

Showing 529 - 576 of 594 Items

Sort By:

Per Page

Fluke

Advanced power quality functions, unprecedented energy analysis capabilities. Think of the Fluke 435 II Power Quality and Energy Analyzer as your insurance policy. No matter what goes wrong in your facility, with the 435 II you will always be prepared. Equipped with advanced power quality functions and energy monetization capabilities, there is no electrical issue this model cant handle.

MFR: Fluke

MFR #: FLUKE-435-II

UPC: 095969615563

Item #: 79308

Available to Order

$15035.84 each

Availability

Location	Available Qty

Dynatel

ULTRA ADVANCED CABLE/PIPE/FAULT LOCATOR US UTIL 3W W/iD CAPACI

MFR: 3M Electrical Products

MFR #: 2273M-ID/UU3W-RT

UPC: 051115135972

Item #: 390950

Available to Order

$10726.34 each

Availability

Location	Available Qty

Dynatel

ULTRA ADVANCED CABLE/PIPE/FAULT LOCATOR US UTIL 5W W/ID CAPACI

MFR: 3M Electrical Products

MFR #: 2273M-ID/UU5W-RT

UPC: 051115135934

Item #: 769118

Available to Order

$11177.93 each

Availability

Location	Available Qty

Take a vibration expert along. Control unplanned downtime, prevent recurring problems, set repair priorities and manage your resources with an entirely new approach to vibration testing. The Fluke 810 helps you locate and diagnose common mechanical problems and prioritize repair actions with no prior machine history.

Fluke

FLUKE-810 Vibration Tester

MFR: Fluke

MFR #: FLUKE-810

UPC: 095969527415

Item #: 228870

Available to Order

$22839.42 each

Availability

Location	Available Qty

Fluke

Universal Temperature Probe

MFR: Fluke

MFR #: 80T-150UA

UPC: 095969446617

Item #: 25586

Available to Order

$650.96 each

Availability

Location	Available Qty

Fluke

AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3

MFR: Fluke

MFR #: I800

UPC: 095969401227

Item #: 200291

Available to Order

$717.32 each

Availability

Location	Available Qty

Fluke

Thermocouple Plug Kit 700TC2 (5 types of Mini-Plug Connectors)

MFR: Fluke

MFR #: FLUKE-700TC2

UPC: 095969050807

Item #: 223771

Available to Order

$235.22 each

Availability

Location	Available Qty

Fluke

SureGrip Air Temperature Probe

MFR: Fluke

MFR #: 80PK-24

UPC: 095969242691

Item #: 199737

Available to Order

$289.13 each

Availability

Location	Available Qty

Fluke

SureGrip Industrial Surface Temperature Probe

MFR: Fluke

MFR #: 80PK-27

UPC: 095969242721

Item #: 112635

Available to Order

$736.28 each

Availability

Location	Available Qty

Fluke

SureGrip Tapered Temperature Probe, Temperature Range: -40 To 816 DEG C, For Use In Air, Non-Caustic Gas And Surface Applications

MFR: Fluke

MFR #: 80PK-26

UPC: 095969242714

Item #: 20153

Available to Order

$289.13 each

Availability

Location	Available Qty

Fluke

THERMOCOUPLE MODULE

MFR: Fluke

MFR #: 80TK

UPC: 095969009423

Item #: 261385

Available to Order

$360.23 each

Availability

Location	Available Qty

Fluke

Laboratory accuracy. Wherever you go. The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05 percent + 0.3degrees Celsius) in a rugged, handheld test tool. A single input thermomoeter, 60 Hz noise rejection.

MFR: Fluke

MFR #: FLUKE-51-2-60HZ

UPC: 095969071321

Item #: 181399

Available to Order

$714.80 each

Availability

Location	Available Qty

Fluke

The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT. Application: Linear stroke of 4 cm. Multi-turn vernier for fine adjustment of pressure.

MFR: Fluke

MFR #: FLUKE-700PMP

UPC: 095969047999

Item #: 265452

Available to Order

$1086.63 each

Availability

Location	Available Qty

Fluke

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding

MFR: Fluke

MFR #: TP82

UPC: 095969261265

Item #: 287156

Available to Order

$157.82 each

Availability

Location	Available Qty

Fluke

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. Is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow to be connected to multimeters with banana inputs.

MFR: Fluke

MFR #: I200S

UPC: 095969063944

Item #: 79228

Available to Order

$546.67 each

Availability

Location	Available Qty

Fluke

TEST LEAD ACC SET LANTERN TIP TEST PROBE RED/BLK

MFR: Fluke

MFR #: TP74

UPC: 095969078788

Item #: 96313

Available to Order

$53.70 each

Availability

Location	Available Qty

Dynatel

M-SERIES PIPE/CBL/FAULT/EMS LOCATOR UTIL 4.5" CPLR 12W

MFR: 3M Electrical Products

MFR #: 2573-ID/U12

UPC: 051115535444

Item #: 55648

Available to Order

$13371.05 each

Availability

Location	Available Qty

Dynatel

PIPE/CABLE/FAULT LOCATOR UTILITY 4.5 CPLR 3W

MFR: 3M Electrical Products

MFR #: 2573-U3

UPC: 051135331859

Item #: 814248

Available to Order

$10980.04 each

Availability

Location	Available Qty

Discontinued

Fluke

PROBE, SECON. PRT, 100 OHM (3/16 X 9 INCH) Type P: Info-Con for 1523 or 1524

MFR: Fluke

MFR #: 5615-9-P

UPC: 095969482271

Item #: 1194562

Available to Order

$2713.10 each

Availability

Location	Available Qty

Discontinued

Fluke

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert A handles a full range of probe sizes with a single well of each size.

MFR: Fluke

MFR #: 9103-A-156

UPC: 095969128582

Item #: 822939

Available to Order

$8661.64 each

Availability

Location	Available Qty

Discontinued

Fluke

REFERENCE PRESSURE GAUGE G70M

MFR: Fluke

MFR #: 2700G-G70M

UPC: 095969623568

Item #: 640588

Available to Order

$3032.74 each

Availability

Location	Available Qty

Discontinued

Fluke

This four channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.

MFR: Fluke

MFR #: 294-U115V

UPC: 095969287852

Item #: 682349

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

A selection of universal waveform generators offering superior performance and excellent value. This two channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces

MFR: Fluke

MFR #: 282-U115V

UPC: 095969287913

Item #: 682343

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

This one channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.

MFR: Fluke

MFR #: 291-U115V

UPC: 095969287784

Item #: 682347

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

A selection of universal waveform generators offering superior performance and excellent value. This one channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces

MFR: Fluke

MFR #: 281-U115V

UPC: 095969287883

Item #: 682342

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

This two channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.

MFR: Fluke

MFR #: 292-U115V

UPC: 095969287821

Item #: 682348

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Soft case compatible with many Fluke tools. The case top opens vertically for easy removal of tools with elastic loops inside to hold tools in place. A main storage section with a separate nylon pocket for storing accessories. Durable polyester design for long life. The case is compatible with many Fluke test tools including: T6 and T5 Series, T+/T+PRO, 110 Series, 170 Series, 233, 87V, 83V, 3000 FC, 70/370 FC Series, 902/902 FC, PRV240/PRV240FS, and 62 MAX/MAX+.

MFR: Fluke

MFR #: C60

UPC: 095969866705

Item #: 995229

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Test Lead Set, Included: Safety Designed Ground Leads, Shrouded Plugs And Notched Tip, Maximum Voltage: 600 VRMS, 1 AMP Maximum Current, Bandwidth: 12.5 MHZ, Length: 1.2 MR, For Use With The Fluke ScopeMeter 120 Series Hand Held Oscilloscopes

MFR: Fluke

MFR #: STL120-III

UPC: 095969601085

Item #: 397141

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

A selection of universal waveform generators offering superior performance and excellent value. This four channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces

MFR: Fluke

MFR #: 284-U115V

UPC: 095969287944

Item #: 682344

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

The fast one-handed tool for mA loop checks in Ex zones. The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2

MFR: Fluke

MFR #: FLUKE-707EX

UPC: 095969207287

Item #: 253503

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads. The Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics. One of the leading wattage meters of the world, the multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit. Besides effectively performing basic tasks like measuring wattage, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.

MFR: Fluke

MFR #: FLUKE-345

UPC: 095969344999

Item #: 200691

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Extended Fine Point Tip Adapter Set, Model: 8845A, Voltage Rating: 300 VRMS/VDC, Amperage Rating: 3 AMP, Diameter: Tip: 0.08 IN Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, UL94 V-2 Fire Retardant, Color: One Red And One Black, IEC 1010-2-0331, Category II, P2 Compliant

MFR: Fluke

MFR #: 8845A-EFPT

UPC: 095969370547

Item #: 370145

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Calculate energy loss in dollars. The Fluke 434 II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality.

MFR: Fluke

MFR #: FLUKE-434-II

UPC: 095969615532

Item #: 125418

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Leak Detector Flashlight, UV Refrigerant Detection Method, Temperature Rating: 0 - 50 DEG C, Power Supply: AAA Battery, 395 N-M Wavelength, Includes: Detachable Key Chain Carabiner And AAA Batteries, For HVAC Technicians

MFR: Fluke

MFR #: RLD2

UPC: 095969484923

Item #: 786542

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Blank insert

MFR: Fluke

MFR #: 9142-INSZ

UPC: 095969419796

Item #: 640585

Available to Order

$740.64 each

Availability

Location	Available Qty

Discontinued

Fluke

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert B features two wells each of 3/8, 1/4, and 3/16 inches in diameter for doing comparison calibrations.

MFR: Fluke

MFR #: 9103-B-156

UPC: 095969128605

Item #: 1121171

Available to Order

$8661.64 each

Availability

Location	Available Qty

Discontinued

Fluke

Fluke Calibration Industrial Dual-Block Thermometer Dry-Well Calibrator with Two 1/4 and Two 3/16 Inserts, Black Case, 110V, 50/60Hz.

MFR: Fluke

MFR #: 9009-B-156

UPC: 095969128421

Item #: 871581

Available to Order

$14002.08 each

Availability

Location	Available Qty

Discontinued

Fluke

Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is designed for use with the 9103 Field Dry-Well. Insert D 9103.

MFR: Fluke

MFR #: 3103-6

UPC: 095969205573

Item #: 912644

Available to Order

$654.89 each

Availability

Location	Available Qty

Discontinued

Fluke

Need portability and extreme stability. Hart Micro-Baths have both. We invented the Micro-Bath. While many have tried to replicate it they can't use the proprietary Hart Scientific controllers, so none of them deliver performance like a Hart bath. Micro-Baths can be used anywhere for any type of sensor. It is smaller and lighter than most dry-wells, has a spill-proof lid, and easy to carry. Micro-Baths can even be transported with the fluid in them. Range: -5 degrees Celsius to 125 degrees Celsius (23 degrees Fahrenheit to 257 degrees Fahrenheit)

MFR: Fluke

MFR #: 7102-156

UPC: 095969128254

Item #: 647228

Available to Order

$14501.04 each

Availability

Location	Available Qty

Discontinued

Fluke

This dry-well is only four inches high and six inches wide, reaches temperatures as low as 10degrees Celsius, includes a NIST-traceable calibration, and is stable to plus or minus0.05degrees Celsius. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient. It has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. It also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable. Block B has four holes that accept probe diameters of 3/8, 1/4, 3/16 and 1/8.

MFR: Fluke

MFR #: 9100S-B-156

UPC: 095969205603

Item #: 500672

Available to Order

$5098.75 each

Availability

Location	Available Qty

Discontinued

Fluke

Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm

MFR: Fluke

MFR #: 9142-INSE

UPC: 095969419765

Item #: 903896

Available to Order

$865.38 each

Availability

Location	Available Qty

Discontinued

Fluke

For IR calibrations above normal ambient, the 9132 provides a steady blackbody target up to 500degrees Celsius (932degrees Fahrenheit). With precision to plus or minus0.5degrees Celsius and stability to plus or minus0.1degrees Celsius, this new portable IR unit can certify most handheld pyrometers. Short heating and cooling times mean you won't have to wait extended periods of time to get your work done. From room temperature to 500degrees Celsius the 9132 will be stable within 30 minutes. You won't find a more compact IR calibrator. Range: 50 to 500degrees Celsius (122 to 932degrees Fahrenheit)

MFR: Fluke

MFR #: 9132-156

UPC: 095969128865

Item #: 947797

Available to Order

$10953.74 each

Availability

Location	Available Qty

Discontinued

Fluke

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.

MFR: Fluke

MFR #: 9140-A-156

UPC: 095969128926

Item #: 912847

Available to Order

$7398.65 each

Availability

Location	Available Qty

Discontinued

Fluke

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert B (comparison block): 2 3/8,2 1/4, and 2 3/16 holes.

MFR: Fluke

MFR #: 9140-B-156

UPC: 095969128940

Item #: 756371

Available to Order

$7398.65 each

Availability

Location	Available Qty

Discontinued

Fluke

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert A (variety block) 1/2, 3/8, 1/4, 3/16, 1/8, and 1/16 holes.

MFR: Fluke

MFR #: 9150-A-156

UPC: 095969129046

Item #: 948022

Available to Order

$19950.62 each

Availability

Location	Available Qty

Discontinued

Fluke

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert B (comparison block) 2Ea 3/8, 2Ea 1/4, and 2Ea 3/16 holes.

MFR: Fluke

MFR #: 9150-B-156

UPC: 095969129060

Item #: 948025

Available to Order

$19950.62 each

Availability

Location	Available Qty

Discontinued

Fluke

If you're calibrating IR guns at cold temperatures, this is for you. With solid-state cooling technology, this new IR calibrator reaches -30degrees Celsius (22degrees Fahrenheit) in standard ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice buildup on the target can be avoided. At the upper end of its range, the 9133 provides steady temperatures to 160degrees Celsius (320degrees Fahrenheit). With heating and cooling times of about 15 minutes from ambient to either extreme, this gets you to the temperature quickly and performs when it gets there. Compare your IR devices to the temperature display-its factory calibrated to be within plus or minus0.4degrees Celsius (plus or minus0.7degrees Fahrenheit). No other IR calibrators give you this level of precision in such compact packages. Whatever your temperature application, trust a Hart product to solve it. Range: -30 to 150degrees Celsius @ 23degrees Celsius ambient (-22 to 302degrees Fahrenheit @ 73degrees Fahrenheit ambient)

MFR: Fluke

MFR #: 9133-156

UPC: 095969128889

Item #: 691837

Available to Order

$15475.57 each

Availability

Location	Available Qty

Discontinued

Fluke

Comes in a yellow airtight and watertight case

MFR: Fluke

MFR #: 9009-Y-156

UPC: 095969128445

Item #: 646219

Available to Order

Availability

Location	Available Qty