Testing and Measuring Instruments

Showing 433 - 480 of 663 Items

Sort By:

Per Page

Amprobe

This Amprobe Battery Tester quickly and accurately tests batteries without taking the batteries off-line. This Battery Tester features a comparator function with pass-fail indication, and speed testing of batteries up to 500Ah. Compact, light weight and simultaneously measures battery resistance and voltage up to 40V.

MFR: Fluke

MFR #: BAT-500

UPC: 095969499187

Item #: 669539

Available to Order

$2472.54 each

Availability

Location	Available Qty

Fluke

Fluke-1625-2 Advanced Geo Earth Ground Tester Kit

MFR: Fluke

MFR #: FLUKE-1625-2/KIT

UPC: 095969666879

Item #: 475752

Available to Order

$9597.15 each

Availability

Location	Available Qty

Amprobe

True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus Minus (1 PCT RDG + 3 LSD) For Resistance, Plus Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use

MFR: Fluke

MFR #: ACDC-52NAV

UPC: 095969556651

Item #: 607349

Available to Order

$819.31 each

Availability

Location	Available Qty

Amprobe

Take this clamp meter to extremes. Most digital clamp meters have LCD screens that tend to freeze below 32 degrees (0 degrees Celcius) but the Amprobe RS-1007 PRO, an analog clamp meter can take extreme heat or cold and keep on measuring amps and volts-without problems or batteries.

MFR: Fluke

MFR #: RS-1007-PRO

UPC: 095969497725

Item #: 35794

Available to Order

$494.78 each

Availability

Location	Available Qty

Amprobe

Complete with a full range of diagnostic capabilities including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter, the Amprobe Navigator Clamp On Meter serves as a first line of defense for power monitoring and verifying system conditions before deploying more specialized tools -- or incurring additional costs. Rated CAT IV 600 V/CAT III 1000 V, these clamp on meters offer a new innovative navigation system that eliminates confusing push buttons, and replaces them with a single joystick. Its all about easy and reliable measurements. Amprobes new line of Navigator Clamp On Meters feature quick, easy to use single hand selection of measurements. The joy stick control allows quick selection of measurement features on the display from MAX -MIN to power factor to AC- DC current, with many more available. Simply highlight the desired measurement feature using the joy stick and press to select. Rugged and CAT IV reliable, this clamp on meter also features, super bright backlight display, built-in jaw flashlight and over mold bodies to absorb shock -- all you need for commercial and industrial environments.

MFR: Fluke

MFR #: ACDC-54NAV

UPC: 095969556675

Item #: 160820

Available to Order

$1018.69 each

Availability

Location	Available Qty

Amprobe

Low Current Clamp On Ammeter, Amperage Rating: AC DC: 4 AMP, 40 AMP, Frequency Rating: 40 HZ - 400 HZ In AC, Measuring Range: 0 - 40 AMP DC Or AC Peak, Operating Temperature: 0 - 50 DEG C, Dimensions: 184 MM Length X 71 MM Width X 31 MM Height, Battery Type: 9 V, Alkaline PP3, NEDA 1604, Display: 4000 Count,10 MM High Characters, Maximum Jaw Opening: 19 MM Cable, Maximum Jaw Opening: 20 MM, Accuracy: Plus-Minus (1.3PCT + 5 Digits), Temperature coefficient: Plus-Minus 0.05PCT Of RDG-DEGC, Resolution: 1 MILAMP In 4 AMP Range, 10 MILAMP In 40 AMP Range, Autoranging: 4 AMP-40 AMP, CE Certified, CAT III 300V

MFR: Fluke

MFR #: LH41A

UPC: 095969416542

Item #: 783715

Available to Order

$1235.53 each

Availability

Location	Available Qty

Amprobe

This current transformer probe measures AC or DC current. It converts high current to a low level millivolt signal for input directly into a test instrument. It can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.

MFR: Fluke

MFR #: CT235A

UPC: 095969414586

Item #: 607872

Available to Order

$532.62 each

Availability

Location	Available Qty

Amprobe

Amprobe Clamp Multimeter with leakage current capability measures low AC current in the microamps. Great for applications requiring measurement of leakage and fault currents.

MFR: Fluke

MFR #: AC50A

UPC: 095969416719

Item #: 764819

Available to Order

$1057.98 each

Availability

Location	Available Qty

Amprobe

User-friendly and accurate. Think safety and Amprobes ground resistance tester second. Use the on-board memory and data logging features to make your work more efficient.

MFR: Fluke

MFR #: DGC-1000A

UPC: 095969366311

Item #: 194199

Available to Order

$4592.91 each

Availability

Location	Available Qty

Amprobe

True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus-Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus-Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus/Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus-Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus-Minus (1 PCT RDG + 3 LSD) For Resistance, Plus-Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus-Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use

MFR: Fluke

MFR #: ACD-50NAV

UPC: 095969556637

Item #: 158794

In Stock - Check Availability

$617.03 each

Availability

Location	Available Qty

Amprobe

Small size doesnt mean small features. This Amprobe Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction and CAT III 600V rating, this meter is a must-have professional troubleshooting tool for commercial electricians and electrical contractors.

MFR: Fluke

MFR #: AMP-25

UPC: 095969778787

Item #: 390952

Available to Order

$321.60 each

Availability

Location	Available Qty

Fluke

INFRARED TELEPHOTO LENS FOR TI200-TI300-TI400

MFR: Fluke

MFR #: FLK-LENS/TELE2

UPC: 095969668637

Item #: 325867

Available to Order

$2989.17 each

Availability

Location	Available Qty

Fluke

FLUKE 4 IN (100MM) INFRARED WINDOW WITH SECURITY KEY DOOR LATCH

MFR: Fluke

MFR #: FLUKE-CV401

UPC: 095969670579

Item #: 730603

Available to Order

$1335.53 each

Availability

Location	Available Qty

Fluke

FLUKE 3 IN (75MM) INFRARED WINDOW WITH SECURITY KEY DOOR LATCH

MFR: Fluke

MFR #: FLUKE-CV301

UPC: 095969670562

Item #: 785285

Available to Order

$940.94 each

Availability

Location	Available Qty

Fluke

Reduce LCD screen glare and reflections in bright sunlight or other areas where ambient lighting conditions are bright with this durable, heavy-duty plastic accessory visor. It can be used inside or outside, and clips onto the thermal imager without the need for any additional hardware. It can be easily removed and stored when not in use.

MFR: Fluke

MFR #: FLK-TI-VISOR3

UPC: 095969668651

Item #: 787389

Available to Order

$210.21 each

Availability

Location	Available Qty

Fluke

TRIPOD MTG ACCESSORY/HOLDER FOR TI200-TI300-TI400

MFR: Fluke

MFR #: FLK-TI-TRIPOD3

UPC: 095969668668

Item #: 733540

Available to Order

$252.91 each

Availability

Location	Available Qty

Fluke

INFRARED WIDE ANGLE LENS FOR TI200-TI300-TI400

MFR: Fluke

MFR #: FLK-LENS/WIDE2

UPC: 095969668644

Item #: 325868

Available to Order

$2989.17 each

Availability

Location	Available Qty

Fluke

THRML IMAGER INFRARED CAMERA 25 MICRON MACRO IR LENS FOR TiX560, TiX520 LENS IR TELEPHOTO ZOOM

MFR: Fluke

MFR #: FLK-LENS/25MAC2

UPC: 095969782258

Item #: 763592

Available to Order

$10199.36 each

Availability

Location	Available Qty

Fluke

4X TELEPHOTO IR LENS FOR TiX560, TiX520, Ti400, Ti300, Ti200

MFR: Fluke

MFR #: FLK-LENS/4XTELE2

UPC: 095969782241

Item #: 488557

Available to Order

$14321.81 each

Availability

Location	Available Qty

Fluke

The experts choice for building diagnostics. Is the basic electrical tester for residential electricians and HVAC technicians, who need a durable, reliable tool for testing voltage and continuity. It has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, it is an excellent choice for most light residential, and HVAC applications. Combining the advantages of traditional solenoid testers with features designed for added user protection, ruggedness and reliability, Electrical Tester is suitable for use in most residential, industrial and commercial environments. The testers have a hazardous voltage warning light and are capable of detecting voltage even when the battery is dead. The testers GFCI trip capability, built-in flashlights, continuity beeper and extra heavy-duty test leads and probes (both replaceable).

MFR: Fluke

MFR #: T+

UPC: 095969327909

Item #: 12684

Available to Order

$188.86 each

Availability

Location	Available Qty

Fluke

The T+PRO-1AC Kit combines two troubleshooting tools, in one convenient combo pack. The T+PRO Electrical Tester has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, the tester is an excellent choice for most residential, commercial, and industrial applications. The 1AC-II is the pocket-sized voltage detector that can quickly test for energized circuits a must have for any electrician.

MFR: Fluke

MFR #: T+PRO-1AC-KIT

UPC: 095969391931

Item #: 32903

Available to Order

$312.04 each

Availability

Location	Available Qty

Fluke

Is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance. The probe is a precision 1000:1 voltage divider formed by two matched resistors. The unusually high input impedance offered by these resistors minimizes circuit loading and thereby, optimizes measurement accuracy.

MFR: Fluke

MFR #: 80K-40

UPC: 095969001120

Item #: 168134

Available to Order

$587.75 each

Availability

Location	Available Qty

Fluke

Insulation Tester Kit, Voltage Rating: 250, 500, 1000, 2500, 5000, 10000 V, Amperage Rating: Induced: 2 MILAMP, Frequency Response: 50/60 HZ, Resistance Range: 200 KOHM - 2 TOHM, Accuracy: 5 - 20 PCT For 250, 500, 1000, 2500, 5000, 10000 V, 0, - 10 PCT At 1 MILAMP Load Current For Insulation Test, Plus/Minus (5 PCT Plus 2 NAMP)For Leakage Current, Plus/Minus (15 PCT RDG Plus 0.03 MFD)For Capacitance, Display: 75 MM Height X 105 MM Width LCD, Interface Type: PC Port, Enclosure: IP40, Dimensions: 269 MM Length X 277 MM Width X 160 MM Height, Environmental Conditions: Operating Temperature: -20 To 50 DEG C, Storage Temperature: -20 To 65 DEG C, Humidity 80 PCT, Altitude 2000 MR, Includes: Test Cables With Alligator Clips (red, black, green), Infrared Adapter With Interface Cable, FlukeView Forms Basic CD-ROM, AC Power Cord, Soft Carrying Case (base models only), English Manual, Users Manual on CD-ROM, Quick Reference Card, Software License Agreement, Registration Card, FlukeView Forms Installation Guide, USB-IR Cable, Installation Guide, IP67 Hard Case, Certificate of Calibration, Heavy Duty Alligator Clip Leads, Fluke Connect IR to Wireless Connector, CSA, CE Certified, EN 61326, IEC 61010-1: Overvoltage category II, Pollution Degree 2, IEC 61010-2-030: Measurement 600V CAT IV / 1000V CAT IIIIEC 61557-1, IEC 61557-2, C/UL Listed, For Capturing And Trending anomalies for troubleshooting, commissioning and preventative maintenance of insulation resistance

MFR: Fluke

MFR #: FLUKE-1555/KIT

UPC: 095969550970

Item #: 94925

Available to Order

$12918.40 each

Availability

Location	Available Qty

Fluke

Pipe Clamp Temperature Probe Kit, Included: Soft Carrying Case, Temperature Range: -29 To 149 DEG C, For 0.25 - 2.5 IN Pipe Diameter, 80PK-8, 80PK-10

MFR: Fluke

MFR #: 80PK-18

UPC: 095969493826

Item #: 139702

Available to Order

$826.34 each

Availability

Location	Available Qty

Fluke

Current probe is based on Hall Effect technology for use in measurement of both DC and AC current. May be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

MFR: Fluke

MFR #: I310S

UPC: 095969401241

Item #: 199985

Available to Order

$1025.43 each

Availability

Location	Available Qty

Fluke

Thermocouple Adapter permits K-type thermocouples and temperature probes to be connected to the banana jack inputs of general purpose multi-meters that have built-in temperature measurement functions. It replaces the older model Fluke 80AK thermocouple adapter and provides the same form, fit and function as the older model

MFR: Fluke

MFR #: 80AK-A

UPC: 095969370974

Item #: 95564

Available to Order

$85.30 each

Availability

Location	Available Qty

Fluke

AC Current Clamp With BNC Output, Amperage Rating: 40 AMP: 0.5 - 40 AMP, 400 AMP: 5 - 400 AMP, Voltage Rating: 1000 VAC, Frequency Rating: 45 - 400 HZ, Operating Temperature: 0 - 50 DEG C, Dimensions: 5.09 IN Length X 2-3/4 IN Width X 1.18 IN Height, 2.5 MR Output Cable Length, Accuracy: 40 AMP: 2 PCT Plus 0.015 AMP, 400 AMP: 2 PCT Plus 0.04 AMP, 5 - 10 KHZ Typical Bandwidth, 32 MM Maximum Conductor Size, CSA And CE Certified, CAT IV 600 V, CAT III 1000 V

MFR: Fluke

MFR #: I400S

UPC: 095969268585

Item #: 199966

Available to Order

$624.10 each

Availability

Location	Available Qty

SensorSwitch

Ballast Discriminator, SKU - 184EU1

MFR: Acuity Brands

MFR #: BD1

UPC: 745975898787

Item #: 139933

Available to Order

$100.00 each

Availability

Location	Available Qty

Fluke

FLUKE-289 True-RMS Industrial Data Logging Digital Multimeter

MFR: Fluke

MFR #: FLUKE-289

UPC: 095969354103

Item #: 97901

Available to Order

$1553.16 each

Availability

Location	Available Qty

Fluke

Integrated DMM Temperature Probe

MFR: Fluke

MFR #: 80BK-A

UPC: 095969370967

Item #: 191509

Available to Order

$116.90 each

Availability

Location	Available Qty

Fluke

Where rugged meets reliable. The Fluke 365 is a new, innovative Fluke clamp meter, offering a thin, small jaw design that makes it easy to get around tightly packed wires. Be ready for anything. The Fluke 365 is a rugged meter perfect for jobs where access to wires is difficult. The 365s thin, small jaw is detachable with a flexible lead, which makes gaining access to wires and viewing the display easier than ever.

MFR: Fluke

MFR #: FLUKE-365

UPC: 095969544788

Item #: 190663

Available to Order

$601.98 each

Availability

Location	Available Qty

Fluke

1-rms Digital Multimeter designed for basic electrical tests. The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display thats easier to view, this meter is a must have for every toolbox.

MFR: Fluke

MFR #: FLUKE-113

UPC: 095969434522

Item #: 178687

Available to Order

$279.23 each

Availability

Location	Available Qty

Fluke

568 Series Infrared And Contact Thermometer, Temperature Range: -40 To 800 DEG C, Accuracy: Less Than 0 DEG C (32 DEG F): Plus/Minus (1.0 DEG C (Plus/Minus 2 DEG F) Plus 0.1/1 DEG C or DEG F) Greater Than 0 DEG C (32 DEG F): Plus/Minus 1 PCT or Plus/Minus 1 DEG C (Plus/Minus 2 DEG F), whichever is greater, Resolution: 0.1 DEG C, Spectral Response: 8 - 14 MIC-MR, Laser Sighting: Single Point Laser Less Than 1 MILW Output Class 2 (II) Operation, 630 - 670 NMTR, Response Time: Less Than 500 MS, Emissivity: By Built-In Table Of Common Materials Or Digitally Adjustable From 0.10 To 1.00 By 0.01, Display: Dot Matrix 98 X 96 Pixels With Function Menus, Alarm: High/Low Audible And Two-Color Visual, Data Logging: Yes, Trigger: Lock Mechanism, Battery Type: (2) AA/LR6 And USB When Used With A PC, Laser And Backlight ON 12 HR Laser And Backlight Off 100 HR, Dimensions: 6.965 IN Height X 6.441 IN Length X 2.039 IN Width

MFR: Fluke

MFR #: FLUKE-568

UPC: 095969400374

Item #: 30452

Available to Order

$925.76 each

Availability

Location	Available Qty

Fluke

FLUKE-772 Milliamp mA Process Clamp Loop Meter

MFR: Fluke

MFR #: FLUKE-772

UPC: 095969475815

Item #: 136323

Available to Order

$2512.87 each

Availability

Location	Available Qty

Fluke

Is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within

MFR: Fluke

MFR #: 80K-15

UPC: 095969063517

Item #: 184916

Available to Order

$650.96 each

Availability

Location	Available Qty

Fluke

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz.

MFR: Fluke

MFR #: VPS210-G

UPC: 095969435789

Item #: 118328

Available to Order

$399.13 each

Availability

Location	Available Qty

Fluke

General Purpose Probe, Temperature Range: -40 To 260 DEG C, Wire Length: 40 IN, Accuracy: Plus/Minus 1.1 DEG C, Tip Size: 3/8 IN Outer Diameter X 5-1/2 IN Length, CE Certified, For Use On Surfaces And For Insertion Into Air And Non-Caustic Gases

MFR: Fluke

MFR #: 80PK-9

UPC: 095969078474

Item #: 225368

Available to Order

$181.68 each

Availability

Location	Available Qty

Fluke

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 200 MHz and 2 channels. Includes C290 Hard-shell carrying case, SW90W FlukeView for ScopeMeter Test Tool and Windows Software.

MFR: Fluke

MFR #: FLUKE-190-202/AM/S

UPC: 095969601658

Item #: 143793

Available to Order

$7913.18 each

Availability

Location	Available Qty

Fluke

Lighten up your toolbox. The Fluke 561 IR and contact thermometer, combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both infrared and contact temperature, replacing several other test tools. Its fast, efficient, and easy to use, saving you valuable time and effort.

MFR: Fluke

MFR #: FLUKE-561

UPC: 095969332538

Item #: 64714

Available to Order

$493.22 each

Availability

Location	Available Qty

Fluke

K-Type Bead Probe

MFR: Fluke

MFR #: 80PK-1

UPC: 095969009744

Item #: 68621

Available to Order

$110.58 each

Availability

Location	Available Qty

Fluke

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 60 MHz and 2 channels. Includes C290 Hard-shell carrying case, SW90W FlukeView for ScopeMeter Test Tool and Windows Software.

MFR: Fluke

MFR #: FLUKE-190-062/AM/S

UPC: 095969601368

Item #: 134612

Available to Order

$6647.07 each

Availability

Location	Available Qty

Fluke

Laboratory accuracy. Wherever you go. The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05 percent + 0.3degrees Celsius) in a rugged, handheld test tool. A dual input thermomoeter, 60 Hz noise rejection.

MFR: Fluke

MFR #: FLUKE-52-2-60HZ

UPC: 095969071338

Item #: 176285

Available to Order

$896.92 each

Availability

Location	Available Qty

Fluke

Type J Bead Probe, Temperature Range: -40 To 260 DEG C, Wire Length: 48 IN

MFR: Fluke

MFR #: 80PJ-1

UPC: 095969078443

Item #: 160587

Available to Order

$75.82 each

Availability

Location	Available Qty

Fluke

The new Fluke 83-5 has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment.

MFR: Fluke

MFR #: FLUKE-83-5

UPC: 095969245258

Item #: 200219

Available to Order

$812.12 each

Availability

Location	Available Qty

Fluke

Pipe Clamp Temperature Probe. Type K, extra large thermocouple clamps securely to larger pipes for fast temperature and superheat measurement.

MFR: Fluke

MFR #: 80PK-10

UPC: 095969493260

Item #: 137464

Available to Order

$576.69 each

Availability

Location	Available Qty

Fluke

AC Current Clamp, Model: i3000, Amperage Rating: 30/300/3000 AMP, Voltage Rating: 600 VRMS/VDC, Frequency Rating: 10 HZ - 50 KHZ (-3 DB), Measuring Range: 30 - 3000 AMP, 1/10/100 MILV/AMP Output, Operating Temperature: -20 To 90 DEG C (Head), -20 To 85 DEG C (Electronics), Impedance: 100 KOHM Minimum, Battery: (2) AA/MN 1500/LR6 Alkaline, Accuracy: 25 DEG C, Plus/Minus 1 PCT Of Range 45 - 65 HZ, Storage Temperature: -40 To 105 DEG C (Head), -20 To 85 DEG C (Electronics), Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V, BS EN 61010-1: 2001, BS EN 61010-2-032: 2002, BS EN 61010-031: 2002, EN 61326: 1998 And A1, A2 And A3, For Use With Multimeters, Recorders Or Data Loggers

MFR: Fluke

MFR #: I3000-FLEX-4PK

UPC: 095969362474

Item #: 193634

Available to Order

$3583.51 each

Availability

Location	Available Qty

Fluke

Versatile and rugged tools for applications with high currents. Confidently take reliable readings with the True-rms, Fluke 355 and 353 digital clamp meters the tools of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide

MFR: Fluke

MFR #: FLUKE-353

UPC: 095969401197

Item #: 22870

Available to Order

$1769.63 each

Availability

Location	Available Qty

Fluke

SureGrip Piercing Temperature Probe

MFR: Fluke

MFR #: 80PK-25

UPC: 095969242707

Item #: 208219

Available to Order

$289.13 each

Availability

Location	Available Qty