Testing and Measuring Instruments

Showing 49 - 96 of 152 Items

Sort By:

Per Page

expand_less Brand (7)

expand_less Ways to Shop

Made in USA

This Anemometer with Flexible Precision Vane is ideal for HVAC technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems. It offers numerous functionsuse it to check air velocity FPM (feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement location flexibility. Switch between C and F. Input the area of airflow measurement to gain accurate air velocity results. Measure an air flow source for a continuous moving average for up to two hours. Determine minimum, maximum and average readings from a single point air source. Large dual display allows views of both air flow and velocity measurements plus temperature. Long extended flexible cord for remote vane access capabilities. All the measurements can be output to a computer for charting or analysis by optional model TM-SWA software and RS232 cable. Shipped in a deluxe hard carry case to protect and transport your Anemometer.

Amprobe

This Anemometer with Flexible Precision Vane is ideal for HVAC technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems. It offers numerous functionsuse it to check air velocity FPM (feet per minute), air volume (flow) CFM (Cubic feet per minute) plus the remote vane allows greater measurement location flexibility. Switch between C and F. Input the area of airflow measurement to gain accurate air velocity results. Measure an air flow source for a continuous moving average for up to two hours. Determine minimum, maximum and average readings from a single point air source. Large dual display allows views of both air flow and velocity measurements plus temperature. Long extended flexible cord for remote vane access capabilities. All the measurements can be output to a computer for charting or analysis by optional model TM-SWA software and RS232 cable. Shipped in a deluxe hard carry case to protect and transport your Anemometer.

MFR: Fluke

MFR #: TMA10A

UPC: 095969398886

Item #: 421277

Available to Order

$689.79 each

Availability

Location	Available Qty

This Amprobe Hot Wire anemometer technology eliminates the use of bearings and rotating parts. Because of this fact the meter is durable and provides good and stable accuracy of the measurements. Used for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems.

Amprobe

This Amprobe Hot Wire anemometer technology eliminates the use of bearings and rotating parts. Because of this fact the meter is durable and provides good and stable accuracy of the measurements. Used for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration, wind flow and temperature in residential, commercial and industrial air conditioning systems.

MFR: Fluke

MFR #: TMA-21HW

UPC: 095969556910

Item #: 333274

Available to Order

$983.76 each

Availability

Location	Available Qty

This Amprobe Mini Vane Anemometer is a compact, pocket-sized tool for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems.

Amprobe

This Amprobe Mini Vane Anemometer is a compact, pocket-sized tool for indoor air quality and HVAC-R technicians measuring heating, ventilation, air-conditioning, refrigeration wind flow and temperature in residential, commercial and industrial air conditioning systems.

MFR: Fluke

MFR #: TMA5

UPC: 095969516150

Item #: 129392

Available to Order

$403.10 each

Availability

Location	Available Qty

No Image Available

Amprobe

Use with all models of clamp meters. It enables the user of a clamp meter to measure the current on a 2-wire or 3-wire power cord to 15A without having to cut off the plug and separate the conductors, or opening electrical boxes on 120V lines. Includes a 10X current multiplier loop for increased sensitivity and accuracy of low-current measurements.

MFR: Fluke

MFR #: ELS2A

UPC: 095969414852

Item #: 172992

Available to Order

$40.52 each

Availability

Location	Available Qty

This rugged and reliable clamp meter is designed for professional electrician and technician that need a fast responding, feature packed, go-to clamp meter. This meter offers a complete range of measuring functions for both HVAC and electrical applications. This modern Clamp Meter features a large low-light backlit LCD dual display for dimly lit areas and is capable of simultaneously displaying voltage and amperage to perform voltage drop tests. This meter offers TRMS, low pass filter, in-rush current, frequency, resistance, capacitance, temperature, DC micro-Amps, Amp-tip and non-contact voltage detection.

Amprobe

This rugged and reliable clamp meter is designed for professional electrician and technician that need a fast responding, feature packed, go-to clamp meter. This meter offers a complete range of measuring functions for both HVAC and electrical applications. This modern Clamp Meter features a large low-light backlit LCD dual display for dimly lit areas and is capable of simultaneously displaying voltage and amperage to perform voltage drop tests. This meter offers TRMS, low pass filter, in-rush current, frequency, resistance, capacitance, temperature, DC micro-Amps, Amp-tip and non-contact voltage detection.

MFR: Fluke

MFR #: ACD-14-PRO

UPC: 095969806275

Item #: 557457

Available to Order

$458.40 each

Availability

Location	Available Qty

This Amprobe Heavy Duty Multimeter is designed for professional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use applications. It's made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts. Built of tough, fire-retardant thermoplastic resistant to grease and chemical spills, with all sensitive components shock-mounted for a drop resistant to at least eight feet. This meter has an extended voltage measurement capability of 1500V DC and 1000V AC, unmatched by any other line of digital multimeters. The extended voltage ranges can withstand transients up to 12 kV.

Amprobe

This Amprobe Heavy Duty Multimeter is designed for professional use in harsh environments. The meter is unusually rugged and reliable in everyday heavy use applications. It's made using waterproof construction to prevent dirt, grime and moisture from entering the case and causing inaccurate readings or damaging shorts. Built of tough, fire-retardant thermoplastic resistant to grease and chemical spills, with all sensitive components shock-mounted for a drop resistant to at least eight feet. This meter has an extended voltage measurement capability of 1500V DC and 1000V AC, unmatched by any other line of digital multimeters. The extended voltage ranges can withstand transients up to 12 kV.

MFR: Fluke

MFR #: HD110C

UPC: 095969353250

Item #: 380968

Available to Order

$522.43 each

Availability

Location	Available Qty

The ultimate electronic component verifier measures inductance, capacitance, resistance, transistors, diodes and microwave diodes.

Amprobe

The ultimate electronic component verifier measures inductance, capacitance, resistance, transistors, diodes and microwave diodes.

MFR: Fluke

MFR #: LCR55A

UPC: 095969414753

Item #: 588394

Available to Order

$640.31 each

Availability

Location	Available Qty

HVAC Digital Multimeter, Voltage Rating: AC: 40 MILV, 4 V, 40 V, 400 V,600 V - DC: 400 MILV, 4 V, 40 V, 400 V, 600 V, Amperage Rating: 400 MICAMP, 4000 MICAMP, 40 MILAMP, 400 MILAMP, 4 AMP, 10 AMP, Frequency Rating: 10 HZ - 10 MHZ, Resistance: 400 OHM, 4 KOHM, 40 KOHM, 400 KOHM, 4 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, 4000 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.8 PCT RDG + 1LSD )For DC Voltage, Plus-Minus (1.2PCT RDG + 3LSD) For DC Current Plus-Minus (1.2 PCT RDG + 3LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 4000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 600 V, N10140, For HVAC Professional

Amprobe

HVAC Digital Multimeter, Voltage Rating: AC: 40 MILV, 4 V, 40 V, 400 V,600 V - DC: 400 MILV, 4 V, 40 V, 400 V, 600 V, Amperage Rating: 400 MICAMP, 4000 MICAMP, 40 MILAMP, 400 MILAMP, 4 AMP, 10 AMP, Frequency Rating: 10 HZ - 10 MHZ, Resistance: 400 OHM, 4 KOHM, 40 KOHM, 400 KOHM, 4 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, 4000 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.8 PCT RDG + 1LSD )For DC Voltage, Plus-Minus (1.2PCT RDG + 3LSD) For DC Current Plus-Minus (1.2 PCT RDG + 3LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 4000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 600 V, N10140, For HVAC Professional

MFR: Fluke

MFR #: AM-520

UPC: 095969600385

Item #: 454451

Available to Order

$142.60 each

Availability

Location	Available Qty

Pen Probe Digital Multimeter With Built-In Test Probe, Voltage Rating: AC DC: 3.4 V, 34 V, 340 V, 600 V, Resistance: 340 OHM, 3.4 KOHM, 34 KOHM, 340 KOHM, 3.4 MOHM, 34 MOHM, Accuracy: Plus-Minus (0.5PCT RDG + 2 DGT)For DC Voltage, Plus-Minus (1.5PCT RDG + 8 DGT)For AC Voltage, Plus-Minus (1PCT RDG + 4 DGT)For Resistance, Display: 3-3-4 Digit LCD, 3400 Count, Temperature Rating: 0 - 40 DEG C, Peak Hold: No, Diode Test: Yes, Dimensions: 7.8 IN Length X 1.1 IN Width X 1.4 IN Height, CE Certified, UL 3111-1 Listed, Cat III 300 V Safety Rated, Cat II 600 V Safety Rated, For professional Use

Amprobe

Pen Probe Digital Multimeter With Built-In Test Probe, Voltage Rating: AC DC: 3.4 V, 34 V, 340 V, 600 V, Resistance: 340 OHM, 3.4 KOHM, 34 KOHM, 340 KOHM, 3.4 MOHM, 34 MOHM, Accuracy: Plus-Minus (0.5PCT RDG + 2 DGT)For DC Voltage, Plus-Minus (1.5PCT RDG + 8 DGT)For AC Voltage, Plus-Minus (1PCT RDG + 4 DGT)For Resistance, Display: 3-3-4 Digit LCD, 3400 Count, Temperature Rating: 0 - 40 DEG C, Peak Hold: No, Diode Test: Yes, Dimensions: 7.8 IN Length X 1.1 IN Width X 1.4 IN Height, CE Certified, UL 3111-1 Listed, Cat III 300 V Safety Rated, Cat II 600 V Safety Rated, For professional Use

MFR: Fluke

MFR #: DM73C

UPC: 095969365321

Item #: 620621

Available to Order

$192.08 each

Availability

Location	Available Qty

Heavy Duty True-Rms Multimeter With Temperature, Voltage Rating: AC: 1000 MILV, 10 V, 100 V, 1500 V, DC:1000 MILV, 10 V, 100 V, 1000 V, Amperage Rating: 100 MICA, 1000 MICA, 10 MILA, 100 MILA, 400 MILA, 2 AMP, Frequency Rating: 100 HZ, 1000 HZ, 10 KHZ, 100 KHZ, 1000 KHZ, 10 M HZ, Resistance: 1000 OHM, 10 KOHM, 100 KOHM, 1000 KOHM, 10 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, Accuracy: Plus-Minus(0.1 PCT RDG + 5 DGT)For DC Voltage, Plus-Minus (1.2 PCT RDG + 10 DGT)For AC Voltage , Plus-Minus (0.5PCT RDG + 10 DGTS)For DC Current, Plus-Minus (1.5 PCT + 10 DGTS)For AC Current, Plus-Minus (0.5 PCT RDG + 8 DGTS)For Resistance, Plus-Minus(3 PCT RDG +10 DGTS)For Capacitance, Plus-Minus(2 PCT RDG + 4 DEGC)For Temperature, Display: 4 digit LCD, 9999 Counts, With Annunciators, Menu Features And 41 Segment Bargraph, Temperature Rating: -20 To 1300 DEG C, Battery: Standard 9 V, NEDA 1604, JIS 006P, IEC 6F22, Peak Hold: No, Diode Test: Yes, Enclosure: IP67, Dimensions: 200 MM Length X 102MM Width X 59 MM Height, CE,CSA Certified, CAT IV 1000 V rated, For professional Use In Harsh Environments

Amprobe

Heavy Duty True-Rms Multimeter With Temperature, Voltage Rating: AC: 1000 MILV, 10 V, 100 V, 1500 V, DC:1000 MILV, 10 V, 100 V, 1000 V, Amperage Rating: 100 MICA, 1000 MICA, 10 MILA, 100 MILA, 400 MILA, 2 AMP, Frequency Rating: 100 HZ, 1000 HZ, 10 KHZ, 100 KHZ, 1000 KHZ, 10 M HZ, Resistance: 1000 OHM, 10 KOHM, 100 KOHM, 1000 KOHM, 10 MOHM, 40 MOHM, Capacitance: 40 NFD, 400 NFD, 4 MFD, 40 MFD, 400 MFD, Accuracy: Plus-Minus(0.1 PCT RDG + 5 DGT)For DC Voltage, Plus-Minus (1.2 PCT RDG + 10 DGT)For AC Voltage , Plus-Minus (0.5PCT RDG + 10 DGTS)For DC Current, Plus-Minus (1.5 PCT + 10 DGTS)For AC Current, Plus-Minus (0.5 PCT RDG + 8 DGTS)For Resistance, Plus-Minus(3 PCT RDG +10 DGTS)For Capacitance, Plus-Minus(2 PCT RDG + 4 DEGC)For Temperature, Display: 4 digit LCD, 9999 Counts, With Annunciators, Menu Features And 41 Segment Bargraph, Temperature Rating: -20 To 1300 DEG C, Battery: Standard 9 V, NEDA 1604, JIS 006P, IEC 6F22, Peak Hold: No, Diode Test: Yes, Enclosure: IP67, Dimensions: 200 MM Length X 102MM Width X 59 MM Height, CE,CSA Certified, CAT IV 1000 V rated, For professional Use In Harsh Environments

MFR: Fluke

MFR #: HD160C

UPC: 095969353267

Item #: 607902

Available to Order

$851.33 each

Availability

Location	Available Qty

DIGITAL CLAMP-ON METER

Amprobe

This high-current clamp doubles as a multimeter for AC and DC voltage, resistance and continuity.

MFR: Fluke

MFR #: ACD-6-PRO

UPC: 095969365888

Item #: 31281

Available to Order

$243.01 each

Availability

Location	Available Qty

MILLIOHMMETER BATTERY POWERED

Amprobe

Diagnose potential failure with this milliohm meter, portable battery powered milliohm meter. Quickly check windings opens or shorts in motors, generators and transformers, wire-to-wire connection resistances, heating elements testing and contact resistance in critical electrical connections.

MFR: Fluke

MFR #: MO-100

UPC: 095969499194

Item #: 420416

Available to Order

$2223.68 each

Availability

Location	Available Qty

This Amprobe Digital Clamp Multimeter is the perfect choice for HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance, frequency and true-rms accuracy. This digital clamp multimeter provides added functionality with a dual display for views of amperage and voltage simultaneously.

Amprobe

This Amprobe Digital Clamp Multimeter is the perfect choice for HVAC and electrical applications due to its versatile set of features which includes microamps, temperature with thermocouple, capacitance, frequency and true-rms accuracy. This digital clamp multimeter provides added functionality with a dual display for views of amperage and voltage simultaneously.

MFR: Fluke

MFR #: ACD-14-TRMS-PLUS

UPC: 095969436090

Item #: 142294

Available to Order

$497.69 each

Availability

Location	Available Qty

ACD-14 PLUS,DUAL DISPL DIGIT CLAMP-ON MM

Amprobe

This clamp meter works as both an HVAC multimeter and electrical multimeter with a versatile set of features, including microamps, capacitance, frequency and temperature with included thermocouple.

MFR: Fluke

MFR #: ACD-14-PLUS

UPC: 095969436083

Item #: 773424

Available to Order

$410.37 each

Availability

Location	Available Qty

DIG SLING PSYCHROMETER W/DEW & WET BULB

Amprobe

Relative Humidity Temperature Meter, Included: Carrying Case, Sensor Cover, Battery (Installed), Users Manual, Display: Dual Display, Minimum/Maximum Memory: Yes, Auto Power Off: Yes, Response Time: Humidity: 180 S, Temperature: 10 S, Dew Point Range: -20 To 60 DEG C At Plus/Minus0.8 DEG C Accuracy, Temperature Accuracy: Plus/Minus 0.8 DEG C, Wet Bulb Temperature Range: -20 To 60 DEG C At Plus/Minus0.8 DEG C Accuracy, Humidity Accuracy: Plus/Minus 3 PCT RH At 23 DEG C, Relative Humidity Range: Less Than 70 PCT, Temperature Range: 0 - 40 DEG C, Dimensions: 240 MM Length X 54 MM Width X 34 MM Height, Battery: 9 V, NEDA 1604 Or JIS 006P Or IEC6F22, Dry Bulb Temperature Range: -20 To 60 DEG C, Resolution: 0.1 PCT RH, CE Certified

MFR: Fluke

MFR #: THWD-3

UPC: 095969416726

Item #: 103175

Available to Order

$401.64 each

Availability

Location	Available Qty

Industrial Digital Multimeter With True-Rms, Voltage Rating: AC: 6 V, 60 V, 600 V, 1000 V DC: 600 MILV, 6 V, 60 V, 600 V, 1000 V, Amperage Rating: 600 MICAMP, 6000 MICAMP, 60 MILAMP, 500 MILAMP, 10 AMP, Frequency Rating: 60 HZ, 600 HZ,6 KHZ, 60 KHZ, 600 KHZ,6 MHZ, 60 MHZ, Resistance: 600 OHM, 6 KOHM, 60 KOHM, 600 KOHM, 6 MOHM, 60 MOHM, Capacitance: 60 NFD, 600 NFD, 6 MFD, 60 MFD, 600 MFD, 6000 MFD,60 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.5 PCT RDG + 2LSD )For DC Voltage, Plus-Minus (1PCT RDG + 2LSD) For DC Current Plus-Minus (1.2 PCT RDG + 5LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 6000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 1000 V CAT III 600 V, N10140, For Professional Electricians Use

Amprobe

Industrial Digital Multimeter With True-Rms, Voltage Rating: AC: 6 V, 60 V, 600 V, 1000 V DC: 600 MILV, 6 V, 60 V, 600 V, 1000 V, Amperage Rating: 600 MICAMP, 6000 MICAMP, 60 MILAMP, 500 MILAMP, 10 AMP, Frequency Rating: 60 HZ, 600 HZ,6 KHZ, 60 KHZ, 600 KHZ,6 MHZ, 60 MHZ, Resistance: 600 OHM, 6 KOHM, 60 KOHM, 600 KOHM, 6 MOHM, 60 MOHM, Capacitance: 60 NFD, 600 NFD, 6 MFD, 60 MFD, 600 MFD, 6000 MFD,60 MFD, Accuracy: Plus-Minus (1 PCT RDG + 3LSD) For AC Voltage, Plus-Minus (0.5 PCT RDG + 2LSD )For DC Voltage, Plus-Minus (1PCT RDG + 2LSD) For DC Current Plus-Minus (1.2 PCT RDG + 5LSD) For AC Current, Plus-Minus (1 PCT RDG + 2LSD) For Resistance,Plus-Minus (3.PCT RDG + 5 LSD) For Capacitance, Display: 6000 Counts LCD Display, Temperature Rating: -40 To 1000 DEG C, Battery: 9 V (6F22), Peak Hold: Yes, Diode Test: Yes, Dimensions: 182 MM Length X 90 MM Width X 45 MM Height, CE, CSA-US Certified, CAT III 1000 V CAT III 600 V, N10140, For Professional Electricians Use

MFR: Fluke

MFR #: AM-570

UPC: 095969640862

Item #: 436228

Available to Order

$419.11 each

Availability

Location	Available Qty

If youre looking for a versatile clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments, this Clamp Meter is the best clamp meter for the job. It is the best clamp meter in the AMP-300 Series line including all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC DC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, and continuity.

Amprobe

If youre looking for a versatile clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments, this Clamp Meter is the best clamp meter for the job. It is the best clamp meter in the AMP-300 Series line including all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC DC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, and continuity.

MFR: Fluke

MFR #: AMP-330

UPC: 095969770897

Item #: 436231

Available to Order

$614.12 each

Availability

Location	Available Qty

AM-210 True-RMS AC Clamp Meter, 600 Amp

Amprobe

AM-210 True-RMS AC Clamp Meter, 600 Amp

MFR: Fluke

MFR #: AMP-210

UPC: 095969770859

Item #: 557480

Available to Order

$366.72 each

Availability

Location	Available Qty

Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC-DC current, AC- DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.

Amprobe

Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC-DC current, AC- DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.

MFR: Fluke

MFR #: AMP-320

UPC: 095969770880

Item #: 446855

Available to Order

$523.89 each

Availability

Location	Available Qty

Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.

Amprobe

Whether you need an amp clamp for HVAC, general electrical or motor testing applications, this Clamp Meter features a large backlit display and has the features you need. HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC current, AC DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, continuity and a CAT III 600 V safety rating.

MFR: Fluke

MFR #: AMP-310

UPC: 095969770873

Item #: 639925

Available to Order

$435.11 each

Availability

Location	Available Qty

FCOR- Ferrite Suppression Core

Sixnet

FCOR- Ferrite Suppression Core

MFR: Red Lion

MFR #: FCOR0000

Item #: 810434

Available to Order

$27.35 each

Availability

Location	Available Qty

The Amprobe UAT-505 Underground Utility Locator Kit is the rugged solution for locating underground energized and de-energized wires, cables and pipes. It features fast sound and meter response and depth measurements to 20 feet.

Amprobe

The Amprobe UAT-505 Underground Utility Locator Kit is the rugged solution for locating underground energized and de-energized wires, cables and pipes. It features fast sound and meter response and depth measurements to 20 feet.

MFR: Fluke

MFR #: UAT-505

UPC: 195112014967

Item #: 1278518

Available to Order

$7940.10 each

Availability

Location	Available Qty

Manage all your underground locating needs with the feature-packed UAT-600 Series, designed to accurately pinpoint underground utilities and buried services up to 20 feet deep. Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications. The CAT IV 600 V rating ensures safety when working with energized cables. The locating kit comes complete and ready for use. Includes a signal clamp accessory in addition to the main components.

Amprobe

Manage all your underground locating needs with the feature-packed UAT-600 Series, designed to accurately pinpoint underground utilities and buried services up to 20 feet deep. Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications. The CAT IV 600 V rating ensures safety when working with energized cables. The locating kit comes complete and ready for use. Includes a signal clamp accessory in addition to the main components.

MFR: Fluke

MFR #: UAT-620

UPC: 095969873727

Item #: 992740

Available to Order

$10457.78 each

Availability

Location	Available Qty

This Amprobe Electrical Test Kit offers three electrical testers with testing functions suitable for a variety of residential applications. The kit includes the AM-420 Digital Multimeter, ST-102B Socket Tester with GFCI and VP-1000 Non-Contact Voltage Detector. From identifying voltage presence in outlets and switches to confirming proper wiring of GFCI breakers, this kit boasts all the features needed to perform quick and safe voltage tests.

Amprobe

This Amprobe Electrical Test Kit offers three electrical testers with testing functions suitable for a variety of residential applications. The kit includes the AM-420 Digital Multimeter, ST-102B Socket Tester with GFCI and VP-1000 Non-Contact Voltage Detector. From identifying voltage presence in outlets and switches to confirming proper wiring of GFCI breakers, this kit boasts all the features needed to perform quick and safe voltage tests.

MFR: Fluke

MFR #: PK-110

UPC: 095969690805

Item #: 557486

Available to Order

$96.03 each

Availability

Location	Available Qty

Test Lead, Included: Shrouded 90 DEG Banana Plugs, One Red And One Black Leads And Clips, CE Certified

Amprobe

Test Lead, Included: Shrouded 90 DEG Banana Plugs, One Red And One Black Leads And Clips, CE Certified

MFR: Fluke

MFR #: TL35B

UPC: 095969425124

Item #: 20486

Available to Order

$58.19 each

Availability

Location	Available Qty

Instant feedback with CO2 levels, with additional temperature and humidity measurement. Built-in alarm warns against dangerous CO2 levels. This portable Air Quality meter is designed to measure air quality compliance in occupied spaces such as offices, production floors, schools or hospitals.

Amprobe

Instant feedback with CO2 levels, with additional temperature and humidity measurement. Built-in alarm warns against dangerous CO2 levels. This portable Air Quality meter is designed to measure air quality compliance in occupied spaces such as offices, production floors, schools or hospitals.

MFR: Fluke

MFR #: CO2-100

UPC: 095969499330

Item #: 227320

Available to Order

$893.53 each

Availability

Location	Available Qty

No Image Available

3M

EARTH CONTACT FRAME CABLE

MFR: 3M Electrical Products

MFR #: 9026

UPC: 054007312840

Item #: 482627

Available to Order

$183.21 each

Availability

Location	Available Qty

TIC-410A 48 inch Hot Stick Attachment

Amprobe

TIC-410A 48 inch Hot Stick Attachment

MFR: Fluke

MFR #: TIC-410A

UPC: 095969440516

Item #: 137772

Available to Order

$426.38 each

Availability

Location	Available Qty

This Amprobe Test Lead Kit includes 48" long silicone lead wires, probe clips, spaced lugs, and fold out carrying case as well as spring loaded crimp tips and a red tip length extender.

Amprobe

This Amprobe Test Lead Kit includes 48" long silicone lead wires, probe clips, spaced lugs, and fold out carrying case as well as spring loaded crimp tips and a red tip length extender.

MFR: Fluke

MFR #: DL248D

UPC: 095969414647

Item #: 25267

Available to Order

$186.26 each

Availability

Location	Available Qty

39 IN (1 m) long flexible silicon insulated wire. Right-angle meter plugs. Comfort-grip over molded probes. Gold plated tips for low contact resistance. Set of 2 leads, one black, one red. Measurement Category IV, 1000V per UL-61010. Maximum current 10 amps. Lifetime Limited Warranty.

Greenlee

39 IN (1 m) long flexible silicon insulated wire. Right-angle meter plugs. Comfort-grip over molded probes. Gold plated tips for low contact resistance. Set of 2 leads, one black, one red. Measurement Category IV, 1000V per UL-61010. Maximum current 10 amps. Lifetime Limited Warranty.

MFR: Greenlee

MFR #: TSG-3

UPC: 783310120346

Item #: 170068

Available to Order

$52.01 each

Availability

Location	Available Qty

ESM Series Digital Multimeters. Measures voltage, current, resistance and frequency. Tests continuity and diodes. Backlit LCD with 6,000 count display. Two voltage detection modes - non-contact or using a single test lead. BeepJack warns when test leads are incorrectly inserted in current measurement terminals. Automatic and manual range selection. Relative offset mode to see changes in measurements. Data hold. Use optional USB / RS-232 interface DMSC-2U for direct-to-PC logging. Lifetime Limited Warranty. Accessories included: (2)1.5V AAA batteries, test leads and protective boot.

Greenlee

ESM Series Digital Multimeters. Measures voltage, current, resistance and frequency. Tests continuity and diodes. Backlit LCD with 6,000 count display. Two voltage detection modes - non-contact or using a single test lead. BeepJack warns when test leads are incorrectly inserted in current measurement terminals. Automatic and manual range selection. Relative offset mode to see changes in measurements. Data hold. Use optional USB / RS-232 interface DMSC-2U for direct-to-PC logging. Lifetime Limited Warranty. Accessories included: (2)1.5V AAA batteries, test leads and protective boot.

MFR: Greenlee

MFR #: DM-200A

UPC: 783310087403

Item #: 1228274

Available to Order

$157.33 each

Availability

Location	Available Qty

Megohmmeter/Insulation Tester 5kV. Automatic calibration on start-up. Tests insulation, voltage and frequency. Hazardous voltage warning (icon). Onboard battery charger.

Greenlee

Megohmmeter/Insulation Tester 5kV. Automatic calibration on start-up. Tests insulation, voltage and frequency. Hazardous voltage warning (icon). Onboard battery charger.

MFR: Greenlee

MFR #: 5990A

UPC: 783310084716

Item #: 980918

Available to Order

$4186.23 each

Availability

Location	Available Qty

TESTER, VOLTAGE (GT-65)

Greenlee

TESTER, VOLTAGE (GT-65)

MFR: Greenlee

MFR #: GT-65

UPC: 783310090250

Item #: 2322

Available to Order

$82.87 each

Availability

Location	Available Qty

No Image Available

Greenlee

KELVIN CLIPS, TEST LEADS (CLM-CLIPS)

MFR: Greenlee

MFR #: CLM-CLIPS

UPC: 783310027225

Item #: 666206

Available to Order

$164.85 each

Availability

Location	Available Qty

Megohmmeter/Insulation Tester 1kV. Automatic calculations, potential indes and dielectric absorption ratios. Tests continuity, resistance and frequency measurements. Programmable alarms. Insulation tests resistance continuity. Hazardous voltage alers (icon). Data hold with 300 entry memory. Standby mode saves battery power. Hand held, compact light weight form. Intuitive layout with rotary function selector and large test button. Molded in magnetic mount for convenient hands-free measurements.

Greenlee

Megohmmeter/Insulation Tester 1kV. Automatic calculations, potential indes and dielectric absorption ratios. Tests continuity, resistance and frequency measurements. Programmable alarms. Insulation tests resistance continuity. Hazardous voltage alers (icon). Data hold with 300 entry memory. Standby mode saves battery power. Hand held, compact light weight form. Intuitive layout with rotary function selector and large test button. Molded in magnetic mount for convenient hands-free measurements.

MFR: Greenlee

MFR #: 5882A

UPC: 783310071549

Item #: 974996

Available to Order

$1489.20 each

Availability

Location	Available Qty

Quick and easy check for opens or shorts on transformers before energizing. Provides clear indications of open circuits, short connections and confirmation that the test results are OK. Tests overhead, pad-mount and other distribution transformers. Tests the primary and secondary sides of de-energized transformers without disconnecting. Helps prevent line workers from installing a fuse on a shorted transformer. Automatic self-test feature. Magnet holds the tester in place while testing

Greenlee

Quick and easy check for opens or shorts on transformers before energizing. Provides clear indications of open circuits, short connections and confirmation that the test results are OK. Tests overhead, pad-mount and other distribution transformers. Tests the primary and secondary sides of de-energized transformers without disconnecting. Helps prevent line workers from installing a fuse on a shorted transformer. Automatic self-test feature. Magnet holds the tester in place while testing

MFR: Greenlee

MFR #: TL-AST-M

UPC: 783310556992

Item #: 1253005

Available to Order

$1034.19 each

Availability

Location	Available Qty

No Image Available

Greenlee

5kVDC output to confirm proper operation of voltmeters. Compatible with voltmeters that measure DC Voltage. Powered by 9V lithium or alkaline battery

MFR: Greenlee

MFR #: PT-5000B

UPC: 783310628392

Item #: 347954

Available to Order

$1038.93 each

Availability

Location	Available Qty

No Image Available

Greenlee

15kV and 25kV Class Insulated Underground Probe for Loadbreak Bushings for use with Double Vision, DigiVolt, MARK and EM series of voltmeters and UCT-8 cable fault tester and AT-100 Arrester Tester

MFR: Greenlee

MFR #: ASP-15/25

UPC: 783310055297

Item #: 347952

Available to Order

$295.84 each

Availability

Location	Available Qty

No Image Available

Greenlee

Quick and easy check for opens or shorts on transformers before energizing. Provides clear indications of open circuits, short connections and confirmation that the test results are OK. Tests overhead, pad-mount and other distribution transformers. Tests the primary and secondary sides of de-energized transformers without disconnecting. Helps prevent line workers from installing a fuse on a shorted transformer

MFR: Greenlee

MFR #: TL-MAN-N

UPC: 783310081043

Item #: 1253007

Available to Order

$987.58 each

Availability

Location	Available Qty

No Image Available

Greenlee

MARK analog voltmeter phasing set 0-25kv. Dual stick MARK series measure voltage and perform phasing operations from 0V to 75kV. Single stick EM series measure voltage from 0V to 25kV. No batteries or calibration required. Determines in-phase or out-of-phase. Determines underground cable faults. Discharges underground cables and other equipment that hold capacitive charges. Versatile for overhead and underground applications

MFR: Greenlee

MFR #: MARK-IX

UPC: 783310555520

Item #: 1248627

Available to Order

$3704.67 each

Availability

Location	Available Qty

No Image Available

Greenlee

Digital voltage indicator 100kV, OH. Up to 99kv line-to-ground. Voltage readout distinguishes between nominal and induced voltages. Audible indication when voltage is detected. Test Point mode available. Auto-shutoff and low battery indication features. Versatile for overhead and underground applications

MFR: Greenlee

MFR #: DVI-100

UPC: 783310054900

Item #: 1186148

Available to Order

$1674.26 each

Availability

Location	Available Qty

Quick and easy check for opens or shorts on transformers before energizing. Provides clear indications of open circuits, short connections and confirmation that the test results are OK. Tests overhead, pad-mount and other distribution transformers. Tests the primary and secondary sides of de-energized transformers without disconnecting. Helps prevent line workers from installing a fuse on a shorted transformer. Magnet holds the tester in place while testing

Greenlee

Quick and easy check for opens or shorts on transformers before energizing. Provides clear indications of open circuits, short connections and confirmation that the test results are OK. Tests overhead, pad-mount and other distribution transformers. Tests the primary and secondary sides of de-energized transformers without disconnecting. Helps prevent line workers from installing a fuse on a shorted transformer. Magnet holds the tester in place while testing

MFR: Greenlee

MFR #: TL-MAN-M

UPC: 783310556978

Item #: 1253006

Available to Order

$1023.23 each

Availability

Location	Available Qty

Quick-Check transformer and capacitor tester. Quick and easy check for opens or shorts on transformers or capacitors before energizing. Provides clear indications of open circuits, short connections and confirmation that the test results are OK. Tests overhead, pad-mount and other distribution transformers as well as capacitors and capacitor banks. Tests the primary and secondary sides of de-energized transformers and capacitors without disconnecting. Helps prevent line workers from installing a fuse on a shorted transformer or capacitor

Greenlee

Quick-Check transformer and capacitor tester. Quick and easy check for opens or shorts on transformers or capacitors before energizing. Provides clear indications of open circuits, short connections and confirmation that the test results are OK. Tests overhead, pad-mount and other distribution transformers as well as capacitors and capacitor banks. Tests the primary and secondary sides of de-energized transformers and capacitors without disconnecting. Helps prevent line workers from installing a fuse on a shorted transformer or capacitor

MFR: Greenlee

MFR #: QC-MAN-N

UPC: 783310081050

Item #: 938703

Available to Order

$1090.36 each

Availability

Location	Available Qty

Measure Grounding Circuit Performance Without Disrupting Service. Reads ground resistance down to 0.10 O Fully auto-ranging with data hold to capture readings. Accessories include molded carrying case, 9V Alkaline Battery and calibration verification loop. Impedance function capable of testing 4 separate frequencies (50Hz, 60Hz, 128Hz, and 2083Hz). Widest operating temperature range ( - 4 to 131F) in the industry.

Greenlee

Measure Grounding Circuit Performance Without Disrupting Service. Reads ground resistance down to 0.10 O Fully auto-ranging with data hold to capture readings. Accessories include molded carrying case, 9V Alkaline Battery and calibration verification loop. Impedance function capable of testing 4 separate frequencies (50Hz, 60Hz, 128Hz, and 2083Hz). Widest operating temperature range ( - 4 to 131F) in the industry.

MFR: Greenlee

MFR #: CMGRT-100A

UPC: 783310082217

Item #: 1108322

Available to Order

$3301.43 each

Availability

Location	Available Qty

Quick and easy check for opens or shorts on transformers before energizing. Provides clear indications of open circuits, short connections and confirmation that the test results are OK. Tests overhead, pad-mount and other distribution transformers. Tests the primary and secondary sides of de-energized transformers without disconnecting. Helps prevent line workers from installing a fuse on a shorted transformer. Automatic self-test feature

Greenlee

Quick and easy check for opens or shorts on transformers before energizing. Provides clear indications of open circuits, short connections and confirmation that the test results are OK. Tests overhead, pad-mount and other distribution transformers. Tests the primary and secondary sides of de-energized transformers without disconnecting. Helps prevent line workers from installing a fuse on a shorted transformer. Automatic self-test feature

MFR: Greenlee

MFR #: TL-AST-N

UPC: 783310556985

Item #: 1128855

Available to Order

$988.78 each

Availability

Location	Available Qty

Provides another level of safety for line crews, storm restoration workers and first responders. Alerts user to the proximity of electric fields or energized electrical equipment with a loud alarm and bright lights. Frequency of alarm increases as the user gets closer to the electrical hazard. Detects voltage above 4kVAC line-to-line. Typical initial warning distance is about 7 ft from a 4kVAC conductor. Warning distance increases with higher voltages. Adjustable clip for use on personal protection gear. Field replaceable AAA batteries with low battery indicator

Greenlee

Provides another level of safety for line crews, storm restoration workers and first responders. Alerts user to the proximity of electric fields or energized electrical equipment with a loud alarm and bright lights. Frequency of alarm increases as the user gets closer to the electrical hazard. Detects voltage above 4kVAC line-to-line. Typical initial warning distance is about 7 ft from a 4kVAC conductor. Warning distance increases with higher voltages. Adjustable clip for use on personal protection gear. Field replaceable AAA batteries with low battery indicator

MFR: Greenlee

MFR #: VWS-20

UPC: 783310081364

Item #: 1161817

Available to Order

$690.06 each

Availability

Location	Available Qty

No Image Available

Greenlee

MFR: Greenlee

MFR #: 5467

UPC: 783310054672

Item #: 985950

Available to Order

$1246.96 each

Availability

Location	Available Qty

SENSOR FOR 93-172

Greenlee

SENSOR FOR 93-172

MFR: Greenlee

MFR #: 6061

UPC: 783310060611

Item #: 2045

Available to Order

$212.03 each

Availability

Location	Available Qty