Testing and Measuring Instruments

Showing 529 - 576 of 593 Items
Filters Clear Filters
expand_less Brand (6)
+ Show 22 More
expand_less Ways to Shop
  • 3M
  • FLIR
  • Fluke
  • Panduit
  • Rittal
  • SensorSwitch
Fluke
Digital insulation testing up to 10kV. The redesigned Fluke 1550C insulation resistance tester, offers digital insulation testing up to 10kV, making them ideal for testing a wide range of high voltage equipment including switch gear, motors, generators an
MFR: Fluke
MFR #: FLUKE-1550C
UPC: 095969550918
Item #: 90582
Available to Order
$10475.65 each
Availability
Location Available Qty
Fluke
Small in Size. Big on Toughness. The Fluke 62 MAX+ infrared thermometers are everything you'd expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maintenance. Small in size, extremely accurate and yet easy to use . IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop.
MFR: Fluke
MFR #: FLUKE-62-MAX+
UPC: 095969620215
Item #: 188748
Available to Order
$341.46 each
Availability
Location Available Qty
Fluke
Single channel standard model with memory for 25 readings
MFR: Fluke
MFR #: 1523-156
UPC: 095969481878
Item #: 1194563
Available to Order
$4217.78 each
Availability
Location Available Qty
Fluke
Advanced power quality functions, unprecedented energy analysis capabilities. Think of the Fluke 435 II Power Quality and Energy Analyzer as your insurance policy. No matter what goes wrong in your facility, with the 435 II you will always be prepared. Equipped with advanced power quality functions and energy monetization capabilities, there is no electrical issue this model cant handle.
MFR: Fluke
MFR #: FLUKE-435-II
UPC: 095969615563
Item #: 79308
Available to Order
$15035.84 each
Availability
Location Available Qty
3M
EARTH CONTACT FRAME CABLE
MFR: 3M Electrical Products
MFR #: 9026
UPC: 054007312840
Item #: 482627
Available to Order
$183.21 each
Availability
Location Available Qty
Fluke
FLUKE-810 Vibration Tester
MFR: Fluke
MFR #: FLUKE-810
UPC: 095969527415
Item #: 228870
Available to Order
$22839.42 each
Availability
Location Available Qty
Fluke
Universal Temperature Probe
MFR: Fluke
MFR #: 80T-150UA
UPC: 095969446617
Item #: 25586
Available to Order
$650.96 each
Availability
Location Available Qty
Fluke
AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3
MFR: Fluke
MFR #: I800
UPC: 095969401227
Item #: 200291
Available to Order
$717.32 each
Availability
Location Available Qty
Fluke
Thermocouple Plug Kit 700TC2 (5 types of Mini-Plug Connectors)
MFR: Fluke
MFR #: FLUKE-700TC2
UPC: 095969050807
Item #: 223771
Available to Order
$235.22 each
Availability
Location Available Qty
Fluke
SureGrip Air Temperature Probe
MFR: Fluke
MFR #: 80PK-24
UPC: 095969242691
Item #: 199737
Available to Order
$289.13 each
Availability
Location Available Qty
Fluke
SureGrip Industrial Surface Temperature Probe
MFR: Fluke
MFR #: 80PK-27
UPC: 095969242721
Item #: 112635
Available to Order
$736.28 each
Availability
Location Available Qty
Fluke
SureGrip Tapered Temperature Probe, Temperature Range: -40 To 816 DEG C, For Use In Air, Non-Caustic Gas And Surface Applications
MFR: Fluke
MFR #: 80PK-26
UPC: 095969242714
Item #: 20153
Available to Order
$289.13 each
Availability
Location Available Qty
Fluke
THERMOCOUPLE MODULE
MFR: Fluke
MFR #: 80TK
UPC: 095969009423
Item #: 261385
Available to Order
$360.23 each
Availability
Location Available Qty
Fluke
Laboratory accuracy. Wherever you go. The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05 percent + 0.3degrees Celsius) in a rugged, handheld test tool. A single input thermomoeter, 60 Hz noise rejection.
MFR: Fluke
MFR #: FLUKE-51-2-60HZ
UPC: 095969071321
Item #: 181399
Available to Order
$714.80 each
Availability
Location Available Qty
Fluke
The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT. Application: Linear stroke of 4 cm. Multi-turn vernier for fine adjustment of pressure.
MFR: Fluke
MFR #: FLUKE-700PMP
UPC: 095969047999
Item #: 265452
Available to Order
$1086.63 each
Availability
Location Available Qty
Fluke
Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding
MFR: Fluke
MFR #: TP82
UPC: 095969261265
Item #: 287156
Available to Order
$157.82 each
Availability
Location Available Qty
Fluke
Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. Is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow to be connected to multimeters with banana inputs.
MFR: Fluke
MFR #: I200S
UPC: 095969063944
Item #: 79228
Available to Order
$546.67 each
Availability
Location Available Qty
Fluke
TEST LEAD ACC SET LANTERN TIP TEST PROBE RED/BLK
MFR: Fluke
MFR #: TP74
UPC: 095969078788
Item #: 96313
Available to Order
$53.70 each
Availability
Location Available Qty
Discontinued
Fluke
PROBE, SECON. PRT, 100 OHM (3/16 X 9 INCH) Type P: Info-Con for 1523 or 1524
MFR: Fluke
MFR #: 5615-9-P
UPC: 095969482271
Item #: 1194562
Available to Order
$2713.10 each
Availability
Location Available Qty
Discontinued
Fluke
Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert A handles a full range of probe sizes with a single well of each size.
MFR: Fluke
MFR #: 9103-A-156
UPC: 095969128582
Item #: 822939
Available to Order
$8661.64 each
Availability
Location Available Qty
Discontinued
Fluke
REFERENCE PRESSURE GAUGE G70M
MFR: Fluke
MFR #: 2700G-G70M
UPC: 095969623568
Item #: 640588
Available to Order
$3032.74 each
Availability
Location Available Qty
Discontinued
Fluke
This four channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.
MFR: Fluke
MFR #: 294-U115V
UPC: 095969287852
Item #: 682349
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
A selection of universal waveform generators offering superior performance and excellent value. This two channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces
MFR: Fluke
MFR #: 282-U115V
UPC: 095969287913
Item #: 682343
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
This one channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.
MFR: Fluke
MFR #: 291-U115V
UPC: 095969287784
Item #: 682347
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
A selection of universal waveform generators offering superior performance and excellent value. This one channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces
MFR: Fluke
MFR #: 281-U115V
UPC: 095969287883
Item #: 682342
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
This two channel universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, and tone generator.
MFR: Fluke
MFR #: 292-U115V
UPC: 095969287821
Item #: 682348
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Soft case compatible with many Fluke tools. The case top opens vertically for easy removal of tools with elastic loops inside to hold tools in place. A main storage section with a separate nylon pocket for storing accessories. Durable polyester design for long life. The case is compatible with many Fluke test tools including: T6 and T5 Series, T+/T+PRO, 110 Series, 170 Series, 233, 87V, 83V, 3000 FC, 70/370 FC Series, 902/902 FC, PRV240/PRV240FS, and 62 MAX/MAX+.
MFR: Fluke
MFR #: C60
UPC: 095969866705
Item #: 995229
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Test Lead Set, Included: Safety Designed Ground Leads, Shrouded Plugs And Notched Tip, Maximum Voltage: 600 VRMS, 1 AMP Maximum Current, Bandwidth: 12.5 MHZ, Length: 1.2 MR, For Use With The Fluke ScopeMeter 120 Series Hand Held Oscilloscopes
MFR: Fluke
MFR #: STL120-III
UPC: 095969601085
Item #: 397141
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
A selection of universal waveform generators offering superior performance and excellent value. This four channel universal waveform generator combines many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. They offer 40 MS/s max. sampling speed, 16 MHz function generator, 10 MHz pulse generator, Pulse train pattern generator, Arbitrary waveforms of up to 65 k points, Powerful modulation capabilities, Built-in trigger generators, Waveform Manager Plus for Windows software, Multiple standard waveforms recalled from internal memory, and RS-232 and GPIB interfaces
MFR: Fluke
MFR #: 284-U115V
UPC: 095969287944
Item #: 682344
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
The fast one-handed tool for mA loop checks in Ex zones. The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2
MFR: Fluke
MFR #: FLUKE-707EX
UPC: 095969207287
Item #: 253503
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads. The Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics. One of the leading wattage meters of the world, the multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit. Besides effectively performing basic tasks like measuring wattage, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.
MFR: Fluke
MFR #: FLUKE-345
UPC: 095969344999
Item #: 200691
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Extended Fine Point Tip Adapter Set, Model: 8845A, Voltage Rating: 300 VRMS/VDC, Amperage Rating: 3 AMP, Diameter: Tip: 0.08 IN Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, UL94 V-2 Fire Retardant, Color: One Red And One Black, IEC 1010-2-0331, Category II, P2 Compliant
MFR: Fluke
MFR #: 8845A-EFPT
UPC: 095969370547
Item #: 370145
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Calculate energy loss in dollars. The Fluke 434 II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality.
MFR: Fluke
MFR #: FLUKE-434-II
UPC: 095969615532
Item #: 125418
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Leak Detector Flashlight, UV Refrigerant Detection Method, Temperature Rating: 0 - 50 DEG C, Power Supply: AAA Battery, 395 N-M Wavelength, Includes: Detachable Key Chain Carabiner And AAA Batteries, For HVAC Technicians
MFR: Fluke
MFR #: RLD2
UPC: 095969484923
Item #: 786542
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Blank insert
MFR: Fluke
MFR #: 9142-INSZ
UPC: 095969419796
Item #: 640585
Available to Order
$740.64 each
Availability
Location Available Qty
Discontinued
Fluke
Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert B features two wells each of 3/8, 1/4, and 3/16 inches in diameter for doing comparison calibrations.
MFR: Fluke
MFR #: 9103-B-156
UPC: 095969128605
Item #: 1121171
Available to Order
$8661.64 each
Availability
Location Available Qty
Discontinued
Fluke
Fluke Calibration Industrial Dual-Block Thermometer Dry-Well Calibrator with Two 1/4 and Two 3/16 Inserts, Black Case, 110V, 50/60Hz.
MFR: Fluke
MFR #: 9009-B-156
UPC: 095969128421
Item #: 871581
Available to Order
$14002.08 each
Availability
Location Available Qty
Discontinued
Fluke
Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is designed for use with the 9103 Field Dry-Well. Insert D 9103.
MFR: Fluke
MFR #: 3103-6
UPC: 095969205573
Item #: 912644
Available to Order
$654.89 each
Availability
Location Available Qty
Discontinued
Fluke
Need portability and extreme stability. Hart Micro-Baths have both. We invented the Micro-Bath. While many have tried to replicate it they can't use the proprietary Hart Scientific controllers, so none of them deliver performance like a Hart bath. Micro-Baths can be used anywhere for any type of sensor. It is smaller and lighter than most dry-wells, has a spill-proof lid, and easy to carry. Micro-Baths can even be transported with the fluid in them. Range: -5 degrees Celsius to 125 degrees Celsius (23 degrees Fahrenheit to 257 degrees Fahrenheit)
MFR: Fluke
MFR #: 7102-156
UPC: 095969128254
Item #: 647228
Available to Order
$14501.04 each
Availability
Location Available Qty
Discontinued
Fluke
This dry-well is only four inches high and six inches wide, reaches temperatures as low as 10degrees Celsius, includes a NIST-traceable calibration, and is stable to plus or minus0.05degrees Celsius. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient. It has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. It also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable. Block B has four holes that accept probe diameters of 3/8, 1/4, 3/16 and 1/8.
MFR: Fluke
MFR #: 9100S-B-156
UPC: 095969205603
Item #: 500672
Available to Order
$5098.75 each
Availability
Location Available Qty
Discontinued
Fluke
Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm
MFR: Fluke
MFR #: 9142-INSE
UPC: 095969419765
Item #: 903896
Available to Order
$865.38 each
Availability
Location Available Qty
Discontinued
Fluke
For IR calibrations above normal ambient, the 9132 provides a steady blackbody target up to 500degrees Celsius (932degrees Fahrenheit). With precision to plus or minus0.5degrees Celsius and stability to plus or minus0.1degrees Celsius, this new portable IR unit can certify most handheld pyrometers. Short heating and cooling times mean you won't have to wait extended periods of time to get your work done. From room temperature to 500degrees Celsius the 9132 will be stable within 30 minutes. You won't find a more compact IR calibrator. Range: 50 to 500degrees Celsius (122 to 932degrees Fahrenheit)
MFR: Fluke
MFR #: 9132-156
UPC: 095969128865
Item #: 947797
Available to Order
$10953.74 each
Availability
Location Available Qty
Discontinued
Fluke
May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.
MFR: Fluke
MFR #: 9140-A-156
UPC: 095969128926
Item #: 912847
Available to Order
$7398.65 each
Availability
Location Available Qty
Discontinued
Fluke
May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert B (comparison block): 2 3/8,2 1/4, and 2 3/16 holes.
MFR: Fluke
MFR #: 9140-B-156
UPC: 095969128940
Item #: 756371
Available to Order
$7398.65 each
Availability
Location Available Qty
Discontinued
Fluke
If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert A (variety block) 1/2, 3/8, 1/4, 3/16, 1/8, and 1/16 holes.
MFR: Fluke
MFR #: 9150-A-156
UPC: 095969129046
Item #: 948022
Available to Order
$19950.62 each
Availability
Location Available Qty
Discontinued
Fluke
If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert B (comparison block) 2Ea 3/8, 2Ea 1/4, and 2Ea 3/16 holes.
MFR: Fluke
MFR #: 9150-B-156
UPC: 095969129060
Item #: 948025
Available to Order
$19950.62 each
Availability
Location Available Qty
Discontinued
Fluke
If you're calibrating IR guns at cold temperatures, this is for you. With solid-state cooling technology, this new IR calibrator reaches -30degrees Celsius (22degrees Fahrenheit) in standard ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice buildup on the target can be avoided. At the upper end of its range, the 9133 provides steady temperatures to 160degrees Celsius (320degrees Fahrenheit). With heating and cooling times of about 15 minutes from ambient to either extreme, this gets you to the temperature quickly and performs when it gets there. Compare your IR devices to the temperature display-its factory calibrated to be within plus or minus0.4degrees Celsius (plus or minus0.7degrees Fahrenheit). No other IR calibrators give you this level of precision in such compact packages. Whatever your temperature application, trust a Hart product to solve it. Range: -30 to 150degrees Celsius @ 23degrees Celsius ambient (-22 to 302degrees Fahrenheit @ 73degrees Fahrenheit ambient)
MFR: Fluke
MFR #: 9133-156
UPC: 095969128889
Item #: 691837
Available to Order
$15475.57 each
Availability
Location Available Qty
Discontinued
Fluke
Comes in a yellow airtight and watertight case
MFR: Fluke
MFR #: 9009-Y-156
UPC: 095969128445
Item #: 646219
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty