Test Leads

Showing 97 - 112 of 112 Items
Filters Clear Filters
expand_less Brand (2)
+ Show 3 More
expand_less Ways to Shop
expand_less Color
  • Amprobe
  • Fluke
Fluke
Hanging Hook, For ScopeMeter 190-Series II Test Tools
MFR: Fluke
MFR #: HH290
UPC: 095969580359
Item #: 823118
Available to Order
$204.86 each
Availability
Location Available Qty
Fluke
Unprecedented measurement flexibility. Be ready for anything. The Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 45 cm (18 in) size.
MFR: Fluke
MFR #: FLUKE-I2500-18
UPC: 095969559690
Item #: 136105
Available to Order
$402.89 each
Availability
Location Available Qty
Fluke
AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3
MFR: Fluke
MFR #: I800
UPC: 095969401227
Item #: 200291
Available to Order
$717.32 each
Availability
Location Available Qty
Fluke
Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding
MFR: Fluke
MFR #: TP82
UPC: 095969261265
Item #: 287156
Available to Order
$157.82 each
Availability
Location Available Qty
Fluke
Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. Is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow to be connected to multimeters with banana inputs.
MFR: Fluke
MFR #: I200S
UPC: 095969063944
Item #: 79228
Available to Order
$546.67 each
Availability
Location Available Qty
Fluke
TEST LEAD ACC SET LANTERN TIP TEST PROBE RED/BLK
MFR: Fluke
MFR #: TP74
UPC: 095969078788
Item #: 96313
Available to Order
$53.70 each
Availability
Location Available Qty
Amprobe
This Amprobe Test Lead Kit includes 48" long silicone lead wires, probe clips, spaced lugs, and fold out carrying case as well as spring loaded crimp tips and a red tip length extender.
MFR: Fluke
MFR #: DL248D
UPC: 095969414647
Item #: 25267
Available to Order
$186.26 each
Availability
Location Available Qty
Discontinued
Fluke
Test Lead Set, Included: Safety Designed Ground Leads, Shrouded Plugs And Notched Tip, Maximum Voltage: 600 VRMS, 1 AMP Maximum Current, Bandwidth: 12.5 MHZ, Length: 1.2 MR, For Use With The Fluke ScopeMeter 120 Series Hand Held Oscilloscopes
MFR: Fluke
MFR #: STL120-III
UPC: 095969601085
Item #: 397141
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads. The Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics. One of the leading wattage meters of the world, the multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit. Besides effectively performing basic tasks like measuring wattage, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.
MFR: Fluke
MFR #: FLUKE-345
UPC: 095969344999
Item #: 200691
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Extended Fine Point Tip Adapter Set, Model: 8845A, Voltage Rating: 300 VRMS/VDC, Amperage Rating: 3 AMP, Diameter: Tip: 0.08 IN Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, UL94 V-2 Fire Retardant, Color: One Red And One Black, IEC 1010-2-0331, Category II, P2 Compliant
MFR: Fluke
MFR #: 8845A-EFPT
UPC: 095969370547
Item #: 370145
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing
MFR: Fluke
MFR #: TL225
UPC: 095969288781
Item #: 232057
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke Networks
CABLEIQ QUALIFICATION TESTER
MFR: Fluke
MFR #: CIQ-100
UPC: 754082022602
Item #: 11791
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
Amprobe's new swivel clamp meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places. Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC DC currents, voltage, resistance and capacitance as well as cat III 600 V safety ratings make this clamp on meter something you should swivel to see.
MFR: Fluke
MFR #: ACD-20SW
UPC: 095969498821
Item #: 4556
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1
MFR: Fluke
MFR #: VPS220-R
UPC: 095969435833
Item #: 224255
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Fluke
Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1
MFR: Fluke
MFR #: VPS220-G
UPC: 095969435840
Item #: 224110
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
Test Lead Set - PVC test lead set connects a compatible electrical test meter to a device for testing, Set includes two 48" lead wires, two standard probe tips, and two alligator clips, 3.26" alligator clips have 1.30" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips.
MFR: Fluke
MFR #: MTL-45
UPC: 095969368162
Item #: 124159
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty