Popular Searches

Top Products Matches

Test Leads

Showing 49 - 70 of 70 Items

Sort By:

Per Page

expand_less Brand (1)

expand_less Ways to Shop

Made in USA

Milliamp process clamp meters can measure mA signals without breaking the loop. The Fluke 772 mA Clamp Meter expand upon the capabilities of the popular 771 mA Clamp Meter, adding loop power and mA sourcing to the troubleshooting and process calibration capabilities in all Fluke mA clamp meters. Need more hours in your day. Save time by NOT breaking the loop on 4-20 mA signal measurements. Are you spending time: Taking mA measurements by removing a wire and breaking the loop Calling the control room to isolate a loop Testing analog input/output on a console Troubleshooting devices with mA inputs and outputs Repairing intermittent or erratic 4-20 mA loops Going back to the shop to get extra tools. If you need more time in your busy day take a good look at the Fluke 772 mA Clamp Meters. Its designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Fluke

FLUKE-772 Milliamp mA Process Clamp Loop Meter

MFR: Fluke

MFR #: FLUKE-772

UPC: 095969475815

Item #: 136323

Available to Order

$2368.34 each

Availability

Location	Available Qty

Is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within

Fluke

Is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within

MFR: Fluke

MFR #: 80K-15

UPC: 095969063517

Item #: 184916

Available to Order

$600.40 each

Availability

Location	Available Qty

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz.

Fluke

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz.

MFR: Fluke

MFR #: VPS210-G

UPC: 095969435789

Item #: 118328

Available to Order

$399.13 each

Availability

Location	Available Qty

Versatile and rugged tools for applications with high currents. Confidently take reliable readings with the True-rms, Fluke 355 and 353 digital clamp meters the tools of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide

Fluke

Versatile and rugged tools for applications with high currents. Confidently take reliable readings with the True-rms, Fluke 355 and 353 digital clamp meters the tools of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide

MFR: Fluke

MFR #: FLUKE-353

UPC: 095969401197

Item #: 22870

Available to Order

$1769.63 each

Availability

Location	Available Qty

Rigid Back Probe Pin Set, Voltage Rating: 60 VDC, Length: Tip: 2 IN, Color: One Red And One Black, For Use On 2 MM OD Probe Tips

Fluke

Rigid Back Probe Pin Set, Voltage Rating: 60 VDC, Length: Tip: 2 IN, Color: One Red And One Black, For Use On 2 MM OD Probe Tips

MFR: Fluke

MFR #: TP88

UPC: 095969261289

Item #: 94545

Available to Order

$63.72 each

Availability

Location	Available Qty

Unprecedented measurement flexibility. Be ready for anything. The Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 25 cm (10 in) size.

Fluke

Unprecedented measurement flexibility. Be ready for anything. The Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 25 cm (10 in) size.

MFR: Fluke

MFR #: FLUKE-I2500-10

UPC: 095969559706

Item #: 100084

Available to Order

$363.39 each

Availability

Location	Available Qty

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz.

Fluke

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz.

MFR: Fluke

MFR #: VPS210-R

UPC: 095969435772

Item #: 117668

Available to Order

$399.13 each

Availability

Location	Available Qty

TP 38 Slim Reach Test Probe Set

Fluke

TP 38 Slim Reach Test Probe Set

MFR: Fluke

MFR #: TP38

UPC: 095969078771

Item #: 134421

Available to Order

$50.54 each

Availability

Location	Available Qty

Hanging Hook, For ScopeMeter 190-Series II Test Tools

Fluke

Hanging Hook, For ScopeMeter 190-Series II Test Tools

MFR: Fluke

MFR #: HH290

UPC: 095969580359

Item #: 823118

Available to Order

$188.17 each

Availability

Location	Available Qty

Unprecedented measurement flexibility. Be ready for anything. The Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 45 cm (18 in) size.

Fluke

Unprecedented measurement flexibility. Be ready for anything. The Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 45 cm (18 in) size.

MFR: Fluke

MFR #: FLUKE-I2500-18

UPC: 095969559690

Item #: 136105

Available to Order

$363.39 each

Availability

Location	Available Qty

Milliamp process clamp meters can measure mA signals without breaking the loop. The Fluke 773 mA Clamp Meter is Flukes premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power. Need more hours in your day. Save time by NOT breaking the loop on 4-20 mA signal measurements. Are you spending time: Taking mA measurements by removing a wire and breaking the loop Calling the control room to isolate a loop Testing analog input/output on a console Troubleshooting devices with mA inputs and outputs Repairing intermittent or erratic 4-20 mA loops Going back to the shop to get extra tools. If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. Its designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Fluke

FLUKE-773 Milliamp mA Process Clamp Meter

MFR: Fluke

MFR #: FLUKE-773

UPC: 095969475822

Item #: 3431

Available to Order

$3007.23 each

Availability

Location	Available Qty

AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3

Fluke

AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3

MFR: Fluke

MFR #: I800

UPC: 095969401227

Item #: 200291

Available to Order

$663.60 each

Availability

Location	Available Qty

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding

Fluke

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding

MFR: Fluke

MFR #: TP82

UPC: 095969261265

Item #: 287156

Available to Order

$144.16 each

Availability

Location	Available Qty

Automotive Back Probe Pin Set, Voltage Rating: 60 VDC, For Use With Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit

Fluke

Automotive Back Probe Pin Set, Voltage Rating: 60 VDC, For Use With Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit

MFR: Fluke

MFR #: TP40

UPC: 095969087513

Item #: 21263

In Stock - Check Availability

$104.70 each

Availability

Location	Available Qty

AC Current Clamp-On Probe, Model: i1000, Voltage Rating: 600 VAC Maximum, Amperage Rating: 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current), Measuring Range: 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current, Accuracy: 1 PCT Plus 1 AMP (48 - 65 HZ) ( percentage Reading Plus Floorspec), Enclosure: IP40 (IEC 529), Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output Cable, Operating Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 71 DEG C, Dimensions: 4.37 IN Width X 8.5 IN Length X 1.77 IN Depth, CAT III 600 V, CAT IV 300 V, For Use With Multimeters With Optional PM9081/001 BNC/Banana Adapter And Oscilloscopes

Fluke

AC Current Clamp-On Probe, Model: i1000, Voltage Rating: 600 VAC Maximum, Amperage Rating: 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current), Measuring Range: 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current, Accuracy: 1 PCT Plus 1 AMP (48 - 65 HZ) ( percentage Reading Plus Floorspec), Enclosure: IP40 (IEC 529), Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output Cable, Operating Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 71 DEG C, Dimensions: 4.37 IN Width X 8.5 IN Length X 1.77 IN Depth, CAT III 600 V, CAT IV 300 V, For Use With Multimeters With Optional PM9081/001 BNC/Banana Adapter And Oscilloscopes

MFR: Fluke

MFR #: I1000S

UPC: 095969090476

Item #: 238466

Available to Order

$1185.01 each

Availability

Location	Available Qty

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools

Fluke

I1010 AC/DC Current Clamp

MFR: Fluke

MFR #: I1010

UPC: 095969048200

Item #: 41792

Available to Order

$845.30 each

Availability

Location	Available Qty

Fluke Current Clamps are the ideal tools to extend the current ranges of Multimeters. Is a single range 200A ac current clamp with current output via safety shrouded banana plugs. Is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

Fluke

Fluke Current Clamps are the ideal tools to extend the current ranges of Multimeters. Is a single range 200A ac current clamp with current output via safety shrouded banana plugs. Is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

MFR: Fluke

MFR #: I200

UPC: 095969063937

Item #: 178448

Available to Order

$347.59 each

Availability

Location	Available Qty

TEST LEAD ACC SET LANTERN TIP TEST PROBE RED/BLK

Fluke

TEST LEAD ACC SET LANTERN TIP TEST PROBE RED/BLK

MFR: Fluke

MFR #: TP74

UPC: 095969078788

Item #: 96313

Available to Order

$48.96 each

Availability

Location	Available Qty

Discontinued

SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing

Fluke

SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing

MFR: Fluke

MFR #: TL225

UPC: 095969288781

Item #: 232057

In Stock - Check Availability

$244.89 each

Availability

Location	Available Qty

Discontinued

CABLEIQ QUALIFICATION TESTER

Fluke

CABLEIQ QUALIFICATION TESTER

MFR: Fluke

MFR #: CIQ-100

UPC: 754082022602

Item #: 11791

Available to Order

Availability

Location	Available Qty

Discontinued

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

Fluke

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

MFR: Fluke

MFR #: VPS220-R

UPC: 095969435833

Item #: 224255

Available to Order

Availability

Location	Available Qty

Discontinued

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

Fluke

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

MFR: Fluke

MFR #: VPS220-G

UPC: 095969435840

Item #: 224110

Available to Order

Availability

Location	Available Qty