Power Tools and Attachments

Showing 1 - 48 of 544 Items
Filters Clear Filters
expand_less Brand (2)
+ Show 22 More
expand_less Ways to Shop
  • Greenlee
  • Sta-Kon
Greenlee
Nail Eater Extreme Impact Bit 9/16" (14.3 mm) x 18". Quickly bore through creosoted and salt-treated utility poles. Resists wear, eats through nails and staples. Self-feeding screw point draws the bit through the wood. 7/16 IN hex shank to fit impact drivers.
MFR: Greenlee
MFR #: 37868
UPC: 783310378686
Item #: 961458
Available to Order
$37.08 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 6 Piece Drill/Tap Set, 6-32 TO 1/4-20. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAPKIT
UPC: 783310176206
Item #: 146516
In Stock -
$61.85 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 8-32NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP8-32
UPC: 783310176121
Item #: 144169
In Stock -
$11.97 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 6-32NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP6-32
UPC: 783310176114
Item #: 143473
In Stock -
$11.97 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 10-32NF. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP10-32
UPC: 783310176145
Item #: 45867
In Stock -
$11.49 each
Availability
Location Available Qty
Greenlee
Cobalt-steel pilot drill with split-point tip to prevent walking. For sizes 5/8" - 2-1/4". Use with 645-011 Arbor.
MFR: Greenlee
MFR #: 645-001
UPC: 783310057611
Item #: 80523
In Stock -
$11.97 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 7/8" (22.2 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-7/8
UPC: 783310056959
Item #: 160662
In Stock -
$32.35 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme Shorty Wood Boring Auger Bit; 7/8 Inch, 7-5/8 Inch OAL, 5 Inch Flute
MFR: Greenlee
MFR #: 62PTS-7/8
UPC: 783310317968
Item #: 37907
In Stock -
$36.55 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 1/4-20NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP1/4-20
UPC: 783310176169
Item #: 150493
In Stock -
$11.97 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter Kit. Includes 7/8", 1-1/8", 1-3/8" and 2" Cutter Heads, Arbor, Hex Key and Case. Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 660
UPC: 783310057666
Item #: 121713
In Stock -
$282.78 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 7/8" (22.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-7/8
UPC: 783310101574
Item #: 166737
In Stock -
$33.18 each
Availability
Location Available Qty
Greenlee
Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors. 1/4 IN (6.4 mm) diameter fiberglass adds rigidity when connecting multiple sections. 200 lbs. (0.9 kN) maximum pulling strength. Two different threaded tips accommodate various bundles of wire or cable Includes one 3 IN (0.9 mm) Glo Stix section for improved tip visibility.
MFR: Greenlee
MFR #: 540-24
UPC: 783310105060
Item #: 1756
In Stock -
$102.14 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 1-1/8" (28.6 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-1-1/8
UPC: 783310056973
Item #: 159197
In Stock -
$39.48 each
Availability
Location Available Qty
Greenlee
Small Arbor with Pilot Drill for 7/8 to 1-7/32 Size Cutter
MFR: Greenlee
MFR #: 925-011
UPC: 783310101635
Item #: 170638
In Stock -
$26.72 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 1-1/8" (28.6 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-1-1/8
UPC: 783310101581
Item #: 167407
In Stock -
$39.24 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme 7/8" (22.2 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.
MFR: Greenlee
MFR #: 66PT-7/8
UPC: 783310309277
Item #: 164547
In Stock -
$46.25 each
Availability
Location Available Qty
Greenlee
Glo Stix Kit 3/16" x 15' (4.7mm x 4.6m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.
MFR: Greenlee
MFR #: 540-15
UPC: 783310114222
Item #: 177609
Available to Order
$59.14 each
Availability
Location Available Qty
Greenlee
Carbide-Tipped Hole Cutter 7/8" (22.2mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.
MFR: Greenlee
MFR #: 625-7/8
UPC: 783310383260
Item #: 150286
In Stock -
$48.81 each
Availability
Location Available Qty
Greenlee
Small Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.
MFR: Greenlee
MFR #: 925-001
UPC: 783310101864
Item #: 172714
In Stock -
$10.07 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 1-3/8" (34.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-1-3/8
UPC: 783310057000
Item #: 39378
In Stock -
$44.54 each
Availability
Location Available Qty
Greenlee
Quick change arbor allows youto change cutter heads with a simple push and a turn use the same arbor for different size cutting heads.
MFR: Greenlee
MFR #: 645-011
UPC: 783310057529
Item #: 160518
In Stock -
$46.74 each
Availability
Location Available Qty
Greenlee
Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors. 1/4 IN (6.4 mm) diameter fiberglass adds rigidity when connecting multiple sections. 200 lbs. (0.9 kN) maximum pulling strength. Two different threaded tips accommodate various bundles of wire or cable. 540-24 includes one 3 IN (0.9 mm) Glo Stix section for improved tip visibility. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip..
MFR: Greenlee
MFR #: 540-12
UPC: 783310105046
Item #: 128735
In Stock -
$55.87 each
Availability
Location Available Qty
Greenlee
Glo Stix Kit 5/32" x 18' (4.0mm x 5.5m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.
MFR: Greenlee
MFR #: 540-18
UPC: 783310867968
Item #: 161221
In Stock -
$71.69 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Steel Toothed 6-3/8" (162mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.
MFR: Greenlee
MFR #: 35713
UPC: 783310357131
Item #: 86096
In Stock -
$76.94 each
Availability
Location Available Qty
Greenlee
Self-Feeding Spade Bit Kit (6PC)
MFR: Greenlee
MFR #: 34AR-6
UPC: 783310037101
Item #: 122380
In Stock -
$41.88 each
Availability
Location Available Qty
Greenlee
Hifgh Speed Steel Pilot Drill. 4-1/8" long, 1/4" diameter. Bulk pack of 50.
MFR: Greenlee
MFR #: 37623B
UPC: 783310376248
Item #: 119648
In Stock -
$5.61 each
Availability
Location Available Qty
Greenlee
Holesaw Pilot Drill Bit 1/4" x 4-1/8". Pilot Drills Have Unique Split-Point Tip Design
MFR: Greenlee
MFR #: 39873
UPC: 783310398738
Item #: 10260
In Stock -
$6.22 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-1/8" (28.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1-1/8
UPC: 783310191414
Item #: 165064
In Stock -
$10.31 each
Availability
Location Available Qty
Greenlee
Replacement Pilot Drill for Carbite-Tipped Hole Cutters. For cutters sized 3/4" - 2" (19mm - 50.8mm) using 3mm Hex Set Screw.
MFR: Greenlee
MFR #: 625-001
UPC: 783310398721
Item #: 3744
Available to Order
$10.00 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2-1/2" (63.5 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2-1/2
UPC: 783310191629
Item #: 167028
In Stock -
$18.01 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (22.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-7/8
UPC: 783310191360
Item #: 164494
In Stock -
$9.83 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 12-24NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP12-24
UPC: 783310176152
Item #: 2684
In Stock -
$11.49 each
Availability
Location Available Qty
Greenlee
Cobalt-steel pilot drill with split-point tip to prevent walking. For sizes 2-3/8" - 3". Use with 645-022 Arbor.
MFR: Greenlee
MFR #: 645-002
UPC: 783310057628
Item #: 146853
In Stock -
$13.80 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw Kit for 1/2" - 2" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.
MFR: Greenlee
MFR #: 830
UPC: 783310191926
Item #: 187241
Available to Order
$132.94 each
Availability
Location Available Qty
Greenlee
Quickest, most affordable way to cut perfect holes in ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting. Installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes. in very abrasive materialsand still stay sharp. Stabilizer spring balancescutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Fits a 3/8 IN drill chuck and can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris. Quickest, most affordable way to cut perfect holes inceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilotdrill eliminates changeover time. Fits a 3/8 IN drill chuckand can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris.
MFR: Greenlee
MFR #: 6923
UPC: 783310069232
Item #: 154046
In Stock -
$48.74 each
Availability
Location Available Qty
Thomas & Betts / Sta-Kon
6-Ton Lithium-Ion Battery Powered Inline Open Die Crimp Tool for Crimping #8-500 kcmil Copper, #8-350 kcmil Aluminum Connectors. 20 x 3.5 x 4.5 inch. 8.75 pounds with Battery. 14.4 VDC, 3.0 Ah
MFR: ABB - Installation Products
MFR #: TBM6UNICR-LI
UPC: 783786530441
Item #: 412009
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Thomas & Betts / Sta-Kon
AL H-TAP DIE CODE D COLOR CODE GRN
MFR: ABB - Installation Products
MFR #: 15501A
UPC: 786210774916
Item #: 101462
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Thomas & Betts / Sta-Kon
Type OD Tool Compression Die - 781
MFR: ABB - Installation Products
MFR #: BY35
UPC: 783786107698
Item #: 164401
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Thomas & Betts / Sta-Kon
SMART TOOL PLUS
MFR: ABB - Installation Products
MFR #: BTRF-37C16A
UPC: 786210184357
Item #: 949593
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Greenlee
625-1-1/8 1-1/8 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 625-1-1/8
UPC: 783310383284
Item #: 160193
In Stock -
$56.04 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Steel Toothed 6-5/8" (168mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.
MFR: Greenlee
MFR #: 35714
UPC: 783310357148
Item #: 65658
Available to Order
$85.42 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 1-3/8" (35 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-1-3/8
UPC: 783310101598
Item #: 167997
In Stock -
$47.08 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 3/8-16NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP3/8-16
UPC: 783310116288
Item #: 43401
In Stock -
$12.31 each
Availability
Location Available Qty
Greenlee
Shank Arbor with High-Speed Steel Pilot Drill Bit. 7/16" shank, 1/2" minimum chuck size. Use with 1-1/4" - 6" Hole Saws. The best arbor in the industry ensures a solid connection without any gaps or wobbling. Arbors include replaceable, high-speed steel pilot drill. Pilot drills have unique split-point tip design. Use with Greenlee bi-metal hole saws, recessed light holesaws and carbide-grit hole saws (carbide-tipped pilot drill sold separately). Can be used with Greenlee #901 or #904 bit extensions.
MFR: Greenlee
MFR #: 37156
UPC: 783310371564
Item #: 66935
Available to Order
$32.23 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 10-24NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP10-24
UPC: 783310176138
Item #: 45151
In Stock -
$11.49 each
Availability
Location Available Qty
Greenlee
Shank Arbor with High-Speed Steel Pilot Drill Bit in Clamshell. 7/16" shank, 1/2" minimum chuck size. Use with 1-1/4" - 6" Hole Saws. The best arbor in the industry ensures a solid connection without any gaps or wobbling. Arbors include replaceable, high-speed steel pilot drill. Pilot drills have unique split-point tip design. Use with Greenlee bi-metal hole saws, recessed light holesaws and carbide-grit hole saws (carbide-tipped pilot drill sold separately). Can be used with Greenlee #901 or #904 bit extensions.
MFR: Greenlee
MFR #: 38506
UPC: 783310385066
Item #: 148053
Available to Order
$32.23 each
Availability
Location Available Qty
Greenlee
BIT,STEP #3 (PKGD).
MFR: Greenlee
MFR #: 34403
UPC: 783310344032
Item #: 59610
Available to Order
$67.93 each
Availability
Location Available Qty
Greenlee
BIT,STEP #1 (PKGD).
MFR: Greenlee
MFR #: 34401
UPC: 783310344018
Item #: 57765
In Stock -
$38.50 each
Availability
Location Available Qty