Power Tools and Attachments

Showing 1 - 48 of 666 Items
Filters Clear Filters
expand_less Brand (4)
+ Show 18 More
expand_less Ways to Shop
expand_less Material
  • 3M
  • Cully
  • Greenlee
  • KNIPEX
Greenlee
Cobalt-steel pilot drill with split-point tip to prevent walking. For sizes 5/8" - 2-1/4". Use with 645-011 Arbor.
MFR: Greenlee
MFR #: 645-001
UPC: 783310057611
Item #: 80523
In Stock -
$17.01 each
Availability
Location Available Qty
3M
3M(TM) Stem Connector SC0010, 1/0 AWG Stranded, 2/0 AWG Solid, 10 per case
MFR: 3M Electrical Products
MFR #: SC0010
UPC: 054007146636
Item #: 185023
Available to Order
$48.09 each
Availability
Location Available Qty
KNIPEX
Control Cabinet Key, 2 3/4 in.
MFR: KNIPEX Tools
MFR #: 00 11 03
UPC: 843221004859
Item #: 689398
In Stock -
$46.36 each
Availability
Location Available Qty
CULLY
Relton 1/2 x 12" SDS Rotary/Hammer Carbide Masonry Drill Bits
MFR: Minerallac
MFR #: 59991
UPC: 085937599919
Item #: 1231403
Available to Order
$46.04 each
Availability
Location Available Qty
CULLY
3/8" High Speed Jobber Drill, 118 Point, Steel
MFR: Minerallac
MFR #: 91621
UPC: 085937916211
Item #: 75337
Available to Order
$11.64 each
Availability
Location Available Qty
CULLY
3/16" High Speed Jobber Drill, 118 Point, Steel
MFR: Minerallac
MFR #: 91609
UPC: 085937916099
Item #: 82228
Available to Order
$3.15 each
Availability
Location Available Qty
CULLY
1/2" High Speed Jobber Drill, 118 Point, Steel
MFR: Minerallac
MFR #: 91629
UPC: 085937916297
Item #: 79749
Available to Order
$26.89 each
Availability
Location Available Qty
CULLY
17/64" High Speed Jobber Drill, 118 Point, Steel
MFR: Minerallac
MFR #: 91614
UPC: 085937916143
Item #: 84916
Available to Order
$6.04 each
Availability
Location Available Qty
3M
3M(TM) Stem Connector SC0001, 2 & 1 AWG Stranded, 1 & 10 AWG Solid, 10 per case
MFR: 3M Electrical Products
MFR #: SC0001
UPC: 054007146551
Item #: 184272
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 6 Piece Drill/Tap Set, 6-32 TO 1/4-20. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAPKIT
UPC: 783310176206
Item #: 146516
In Stock -
$85.77 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 1/4-20NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP1/4-20
UPC: 783310176169
Item #: 150493
In Stock -
$16.60 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 8-32NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP8-32
UPC: 783310176121
Item #: 144169
In Stock -
$16.60 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 6-32NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP6-32
UPC: 783310176114
Item #: 143473
In Stock -
$16.60 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 10-32NF. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP10-32
UPC: 783310176145
Item #: 45867
In Stock -
$16.60 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter Kit. Includes 7/8", 1-1/8", 1-3/8" and 2" Cutter Heads, Arbor, Hex Key and Case. Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 660
UPC: 783310057666
Item #: 121713
In Stock -
$401.83 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 7/8" (22.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-7/8
UPC: 783310101574
Item #: 166737
In Stock -
$36.44 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 7/8" (22.2 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-7/8
UPC: 783310056959
Item #: 160662
In Stock -
$48.13 each
Availability
Location Available Qty
Greenlee
Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors. 1/4 IN (6.4 mm) diameter fiberglass adds rigidity when connecting multiple sections. 200 lbs. (0.9 kN) maximum pulling strength. Two different threaded tips accommodate various bundles of wire or cable Includes one 3 IN (0.9 mm) Glo Stix section for improved tip visibility.
MFR: Greenlee
MFR #: 540-24
UPC: 783310105060
Item #: 1756
In Stock -
$99.71 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 1-1/8" (28.6 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-1-1/8
UPC: 783310056973
Item #: 159197
In Stock -
$56.10 each
Availability
Location Available Qty
Greenlee
Small Arbor with Pilot Drill for 7/8 to 1-7/32 Size Cutter
MFR: Greenlee
MFR #: 925-011
UPC: 783310101635
Item #: 170638
In Stock -
$27.84 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 1-1/8" (28.6 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-1-1/8
UPC: 783310101581
Item #: 167407
In Stock -
$40.86 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme 7/8" (22.2 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.
MFR: Greenlee
MFR #: 66PT-7/8
UPC: 783310309277
Item #: 164547
In Stock -
$66.08 each
Availability
Location Available Qty
Greenlee
Glo Stix Kit 3/16" x 15' (4.7mm x 4.6m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.
MFR: Greenlee
MFR #: 540-15
UPC: 783310114222
Item #: 177609
Available to Order
$62.85 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme Shorty Wood Boring Auger Bit; 7/8 Inch, 7-5/8 Inch OAL, 5 Inch Flute
MFR: Greenlee
MFR #: 62PTS-7/8
UPC: 783310317968
Item #: 37907
In Stock -
$55.18 each
Availability
Location Available Qty
Greenlee
Carbide-Tipped Hole Cutter 7/8" (22.2mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.
MFR: Greenlee
MFR #: 625-7/8
UPC: 783310383260
Item #: 150286
In Stock -
$72.63 each
Availability
Location Available Qty
Greenlee
Small Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.
MFR: Greenlee
MFR #: 925-001
UPC: 783310101864
Item #: 172714
In Stock -
$11.07 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 1-3/8" (34.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-1-3/8
UPC: 783310057000
Item #: 39378
In Stock -
$66.23 each
Availability
Location Available Qty
Greenlee
Quick change arbor allows youto change cutter heads with a simple push and a turn use the same arbor for different size cutting heads.
MFR: Greenlee
MFR #: 645-011
UPC: 783310057529
Item #: 160518
In Stock -
$66.41 each
Availability
Location Available Qty
Greenlee
Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors. 1/4 IN (6.4 mm) diameter fiberglass adds rigidity when connecting multiple sections. 200 lbs. (0.9 kN) maximum pulling strength. Two different threaded tips accommodate various bundles of wire or cable. 540-24 includes one 3 IN (0.9 mm) Glo Stix section for improved tip visibility. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip..
MFR: Greenlee
MFR #: 540-12
UPC: 783310105046
Item #: 128735
Available to Order
$59.81 each
Availability
Location Available Qty
Greenlee
Glo Stix Kit 5/32" x 18' (4.0mm x 5.5m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.
MFR: Greenlee
MFR #: 540-18
UPC: 783310867968
Item #: 161221
In Stock -
$70.00 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Steel Toothed 6-3/8" (162mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.
MFR: Greenlee
MFR #: 35713
UPC: 783310357131
Item #: 86096
In Stock -
$84.63 each
Availability
Location Available Qty
3M
3M(TM) Connector CI-750, 750 kcmil Stranded, 10 per case
MFR: 3M Electrical Products
MFR #: CI-750
UPC: 054007256519
Item #: 235010
Available to Order
$66.35 each
Availability
Location Available Qty
3M
3M(TM) Stem Connector SC0030, 3/0 AWG Stranded, 4/0 AWG Solid, 10 per case
MFR: 3M Electrical Products
MFR #: SC0030
UPC: 054007146896
Item #: 204700
Available to Order
$64.00 each
Availability
Location Available Qty
3M
3M(TM) Connector CI-1/0-840, 1/0 AWG Stranded, 10 per case
MFR: 3M Electrical Products
MFR #: CI-1/0-840
UPC: 054007091370
Item #: 1010043
Available to Order
$22.72 each
Availability
Location Available Qty
3M
3M(TM) Connector CI-250, 250 kcmil Stranded, 10 per case
MFR: 3M Electrical Products
MFR #: CI-250
UPC: 054007119098
Item #: 431884
Available to Order
$36.88 each
Availability
Location Available Qty
3M
3M(TM) Transition Connector CI-T-4, 10 per case
MFR: 3M Electrical Products
MFR #: CI-T-4
UPC: 054007119821
Item #: 26170
Available to Order
$22.70 each
Availability
Location Available Qty
3M
3M(TM) Copper Oil Seal Lug OS0750, 750 Stranded, 3 per case
MFR: 3M Electrical Products
MFR #: OS0750
UPC: 054007504467
Item #: 193891
Available to Order
$199.29 each
Availability
Location Available Qty
3M
3M(TM) Scotchlok(TM) CU/AL Connector 20002, Green, 4 AWG, 50 per case
MFR: 3M Electrical Products
MFR #: 20002
UPC: 054007132448
Item #: 72531
Available to Order
$41.74 each
Availability
Location Available Qty
3M
3M(TM) Stem Connector SC0020, 2/0 AWG Stranded, 3/0 AWG Solid, 10 per case
MFR: 3M Electrical Products
MFR #: SC0020
UPC: 054007146711
Item #: 142200
Available to Order
$64.00 each
Availability
Location Available Qty
3M
3M(TM) Connector CI-1/0, 1/0 AWG Stranded, 10 per case
MFR: 3M Electrical Products
MFR #: CI-1/0
UPC: 054007118671
Item #: 1566474
Available to Order
$15.42 each
Availability
Location Available Qty
3M
3M(TM) Connector CI-1/0A, 10 per case
MFR: 3M Electrical Products
MFR #: CI-1/0A
UPC: 054007141761
Item #: 1561787
Available to Order
$22.14 each
Availability
Location Available Qty
KNIPEX
Control Cabinet Key, 1 3/4 in.
MFR: KNIPEX Tools
MFR #: 00 11 02
UPC: 843221004842
Item #: 1422416
Available to Order
$50.44 each
Availability
Location Available Qty
KNIPEX
Universal Control Cabinet Key-Pen Style, 5 3/4 in.
MFR: KNIPEX Tools
MFR #: 00 11 07
UPC: 843221010720
Item #: 1422418
Available to Order
$52.44 each
Availability
Location Available Qty
KNIPEX
Profi-Key Control Cabinet Key, 3 in.
MFR: KNIPEX Tools
MFR #: 00 11 04
UPC: 843221004866
Item #: 1422417
Available to Order
$42.16 each
Availability
Location Available Qty
KNIPEX
Universal Key - Construction, 4 in.
MFR: KNIPEX Tools
MFR #: 00 11 06 V01
UPC: 843221022679
Item #: 1423768
Available to Order
$97.38 each
Availability
Location Available Qty
KNIPEX
Control Cabinet Key DoubleJoint, 5 in.
MFR: KNIPEX Tools
MFR #: 00 11 06 V03
UPC: 843221023904
Item #: 1423823
Available to Order
$43.52 each
Availability
Location Available Qty
KNIPEX
Universal Control Cabinet Key, 4 in.
MFR: KNIPEX Tools
MFR #: 00 11 06
UPC: 843221010713
Item #: 356475
Available to Order
$87.64 each
Availability
Location Available Qty
KNIPEX
TwinKey Universal Control Cabinet Key, 3 3/4 in.
MFR: KNIPEX Tools
MFR #: 00 11 01
UPC: 843221019464
Item #: 524454
Available to Order
$68.18 each
Availability
Location Available Qty