Power Tool Attachments

Showing 49 - 96 of 603 Items
Filters Clear Filters
expand_less Brand (3)
+ Show 12 More
expand_less Ways to Shop
  • Greenlee
  • Klein Tools
  • Southwire
Klein Tools
Bi-Metal Hole Saw, 2-Inch
MFR: Klein Tools
MFR #: 31932
UPC: 092644319327
Item #: 429877
Available to Order
$13.79 each
Availability
Location Available Qty
Klein Tools
Bi-Metal Hole Saw, 6-3/8-Inch
MFR: Klein Tools
MFR #: 31900
UPC: 092644319006
Item #: 429869
In Stock -
$57.48 each
Availability
Location Available Qty
Klein Tools
Flex Bit 54-Inch Extension 3/16-Inch Shank
MFR: Klein Tools
MFR #: 53723
UPC: 092644537233
Item #: 149549
Available to Order
$34.47 each
Availability
Location Available Qty
Klein Tools
Flex Bit Auger 9/16-Inch x 54-Inch
MFR: Klein Tools
MFR #: 53718
UPC: 092644537189
Item #: 10109
Available to Order
$57.47 each
Availability
Location Available Qty
Klein Tools
Ship Auger Bit with Screw Point 7/8-Inch
MFR: Klein Tools
MFR #: 53404
UPC: 092644534041
Item #: 155125
Available to Order
$28.74 each
Availability
Location Available Qty
Klein Tools
Reciprocating Saw Blades, 10/14 TPI, 8-Inch, 5-Pack
MFR: Klein Tools
MFR #: 31741
UPC: 092644691089
Item #: 766918
Available to Order
$20.69 each
Availability
Location Available Qty
Klein Tools
Reciprocating Saw Blades, 6 TPI, 6-Inch, 5-Pack
MFR: Klein Tools
MFR #: 31716
UPC: 092644640445
Item #: 140688
Available to Order
$13.79 each
Availability
Location Available Qty
Klein Tools
Bi-Metal Blades, 24 TPI, 12-Inch, 10-Pack
MFR: Klein Tools
MFR #: 1224BI-P
UPC: 092644314193
Item #: 112014
Available to Order
$28.74 package
Availability
Location Available Qty
Klein Tools
Reciprocating Saw Blades, 6 TPI, 12-Inch, 5-Pack
MFR: Klein Tools
MFR #: 31761
UPC: 092644691072
Item #: 766921
Available to Order
$22.99 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 6 Piece Drill/Tap Set, 6-32 TO 1/4-20. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAPKIT
UPC: 783310176206
Item #: 146516
In Stock -
$77.18 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 1/4-20NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP1/4-20
UPC: 783310176169
Item #: 150493
In Stock -
$14.92 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 8-32NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP8-32
UPC: 783310176121
Item #: 144169
In Stock -
$14.92 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 6-32NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP6-32
UPC: 783310176114
Item #: 143473
In Stock -
$14.92 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. 10-32NF. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAP10-32
UPC: 783310176145
Item #: 45867
In Stock -
$14.92 each
Availability
Location Available Qty
Greenlee
Cobalt-steel pilot drill with split-point tip to prevent walking. For sizes 5/8" - 2-1/4". Use with 645-011 Arbor.
MFR: Greenlee
MFR #: 645-001
UPC: 783310057611
Item #: 80523
In Stock -
$15.32 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter Kit. Includes 7/8", 1-1/8", 1-3/8" and 2" Cutter Heads, Arbor, Hex Key and Case. Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 660
UPC: 783310057666
Item #: 121713
In Stock -
$361.54 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 7/8" (22.5 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-7/8
UPC: 783310101574
Item #: 166737
In Stock -
$35.68 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 7/8" (22.2 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-7/8
UPC: 783310056959
Item #: 160662
In Stock -
$43.30 each
Availability
Location Available Qty
Greenlee
Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors. 1/4 IN (6.4 mm) diameter fiberglass adds rigidity when connecting multiple sections. 200 lbs. (0.9 kN) maximum pulling strength. Two different threaded tips accommodate various bundles of wire or cable Includes one 3 IN (0.9 mm) Glo Stix section for improved tip visibility.
MFR: Greenlee
MFR #: 540-24
UPC: 783310105060
Item #: 1756
In Stock -
$97.93 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 1-1/8" (28.6 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-1-1/8
UPC: 783310056973
Item #: 159197
In Stock -
$50.48 each
Availability
Location Available Qty
Greenlee
Small Arbor with Pilot Drill for 7/8 to 1-7/32 Size Cutter
MFR: Greenlee
MFR #: 925-011
UPC: 783310101635
Item #: 170638
In Stock -
$27.27 each
Availability
Location Available Qty
Greenlee
Ultra Cutter 1-1/8" (28.6 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.
MFR: Greenlee
MFR #: 925-1-1/8
UPC: 783310101581
Item #: 167407
Available to Order
$40.03 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme 7/8" (22.2 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.
MFR: Greenlee
MFR #: 66PT-7/8
UPC: 783310309277
Item #: 164547
In Stock -
$59.43 each
Availability
Location Available Qty
Greenlee
Glo Stix Kit 3/16" x 15' (4.7mm x 4.6m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.
MFR: Greenlee
MFR #: 540-15
UPC: 783310114222
Item #: 177609
In Stock -
$61.73 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme Shorty Wood Boring Auger Bit; 7/8 Inch, 7-5/8 Inch OAL, 5 Inch Flute
MFR: Greenlee
MFR #: 62PTS-7/8
UPC: 783310317968
Item #: 37907
In Stock -
$49.62 each
Availability
Location Available Qty
Greenlee
Carbide-Tipped Hole Cutter 7/8" (22.2mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.
MFR: Greenlee
MFR #: 625-7/8
UPC: 783310383260
Item #: 150286
In Stock -
$65.34 each
Availability
Location Available Qty
Greenlee
Small Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.
MFR: Greenlee
MFR #: 925-001
UPC: 783310101864
Item #: 172714
In Stock -
$10.85 each
Availability
Location Available Qty
Greenlee
Quick Change Carbide Tipped Hole Cutter 1-3/8" (34.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MFR: Greenlee
MFR #: 645-1-3/8
UPC: 783310057000
Item #: 39378
In Stock -
$59.60 each
Availability
Location Available Qty
Greenlee
Quick change arbor allows youto change cutter heads with a simple push and a turn use the same arbor for different size cutting heads.
MFR: Greenlee
MFR #: 645-011
UPC: 783310057529
Item #: 160518
In Stock -
$59.78 each
Availability
Location Available Qty
Greenlee
Highly visible green color rods can be easily threaded together and seen when working above ceilings, down walls, or under raised floors. 1/4 IN (6.4 mm) diameter fiberglass adds rigidity when connecting multiple sections. 200 lbs. (0.9 kN) maximum pulling strength. Two different threaded tips accommodate various bundles of wire or cable. 540-24 includes one 3 IN (0.9 mm) Glo Stix section for improved tip visibility. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip..
MFR: Greenlee
MFR #: 540-12
UPC: 783310105046
Item #: 128735
Available to Order
$58.76 each
Availability
Location Available Qty
Greenlee
Glo Stix Kit 5/32" x 18' (4.0mm x 5.5m) with Bullet and "J" Hook Nose Tips. Fish Stix Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors. More flexible for fishing in walls through outlet box holes. Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4" (6.4 mm) Fish Stix. Clear, non-metalic storagetube keeps Glo Stix charged and ready to use. 200 lbs. (0.9 kN) maximum pulling strength. Optional Whisk Nose Tip is available for fishing over obstacles, and can be used to guide extended Glo Stix sideways above ceilings by rotating. Can also be used to fish longer lengths by providing a tip that can be snagged from the opposite direction with another extended Fish or Glo Stix with a hook nose tip.
MFR: Greenlee
MFR #: 540-18
UPC: 783310867968
Item #: 161221
In Stock -
$68.72 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Steel Toothed 6-3/8" (162mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.
MFR: Greenlee
MFR #: 35713
UPC: 783310357131
Item #: 86096
In Stock -
$81.66 each
Availability
Location Available Qty
Klein Tools
General-Purpose Compass Saw Blades, 8-Inch, For cutting through wallboard or Masonite to install wiring, outlet boxes, etc
MFR: Klein Tools
MFR #: 706
UPC: 092644317064
Item #: 91406
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Klein Tools
Bi-Metal Blades, 18 TPI, 12-Inch, 10-Pack
MFR: Klein Tools
MFR #: 1218BI-P
UPC: 092644314131
Item #: 334018
Available to Order
$28.74 each
Availability
Location Available Qty
Klein Tools
Screwdriver Bits for Impact Driver Set
MFR: Klein Tools
MFR #: 70229
UPC: 092644325311
Item #: 456566
Available to Order
$24.14 each
Availability
Location Available Qty
Southwire
The MAX PUNCH Cutter for 1/2" Stainless Steel dies is made for heavy duty cutting. The MPK050PRO cuts through 10 gauge stainless steel, aluminum, fiberglass and plastic. Features a smoother cut, and will not bow panel or leave jagged edges. Works with most widely used knockout tools.
MFR: Southwire
MFR #: MPKO50PRO
UPC: 032886873898
Item #: 1503081
Available to Order
$99.02 each
Availability
Location Available Qty
Southwire
The MAX PUNCH Cup for 2 1/2" Stainless Steel is made with durable steel to get the job done. Cup creates crimping effect on slug for easy removal. Works with most widely used knockout tools.
MFR: Southwire
MFR #: MPC250PRO
UPC: 032886874055
Item #: 1538428
Available to Order
$114.24 each
Availability
Location Available Qty
Southwire
CUP, MAXPUNCH #MPC50HD FOR SS 1/2 1 EA
MFR: Southwire
MFR #: MPC50PRO
UPC: 032886873997
Item #: 1503083
Available to Order
$30.45 each
Availability
Location Available Qty
Klein Tools
Bi-Metal Blades, 32 TPI, 12-Inch, 100-Pack
MFR: Klein Tools
MFR #: 1232BI
UPC: 092644314247
Item #: 363657
Available to Order
$264.49 package
Availability
Location Available Qty
Southwire
CUTTER, MAXPUNCH #MPKO300HD FOR SS 3 1 EA
MFR: Southwire
MFR #: MPKO300PRO
UPC: 032886873966
Item #: 523470
Available to Order
$217.09 each
Availability
Location Available Qty
Southwire
DIE, SET LARGE #MP-03HD (2-1/2-4) 1 EA
MFR: Southwire
MFR #: 57177201
UPC: 032886873867
Item #: 423943
Available to Order
$1770.93 each
Availability
Location Available Qty
Southwire
Stainless steel small die set for 1/2"-2". Unique three-point cutting surface provides cleaner and quicker cuts. Rated for 10 gauge stainless steel, as well as for mild steel, aluminum, fiberglass and plastics.
MFR: Southwire
MFR #: 57177101
UPC: 032886873850
Item #: 428531
Available to Order
$1576.69 each
Availability
Location Available Qty
Southwire
CUP, MAXPUNCH #MPC300HD FOR SS 3 1 EA
MFR: Southwire
MFR #: MPC300PRO
UPC: 032886874062
Item #: 781959
Available to Order
$121.87 each
Availability
Location Available Qty
Klein Tools
12-Inch General-Purpose Compass Saw Blade, Blade Length: 12-Inch
MFR: Klein Tools
MFR #: 705
UPC: 092644317057
Item #: 92791
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Klein Tools
Bi-Metal Blades, 18 TPI, 12-Inch, 100-Pack
MFR: Klein Tools
MFR #: 1218BI
UPC: 092644314124
Item #: 145518
Available to Order
$264.49 each
Availability
Location Available Qty
Klein Tools
Reciprocating Saw Blades, 10/14 TPI, 6-Inch, 5-Pack
MFR: Klein Tools
MFR #: 31731
UPC: 092644691119
Item #: 766915
Available to Order
$16.09 each
Availability
Location Available Qty
Klein Tools
Replacement Blade for Large Capacity PVC Cutter
MFR: Klein Tools
MFR #: 50035
UPC: 092644500350
Item #: 610190
Available to Order
$68.99 each
Availability
Location Available Qty
Klein Tools
Impact Socket Adapter Transmission
MFR: Klein Tools
MFR #: NRHDA2
UPC: 092644680601
Item #: 413077
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty