Power Tool Attachments

Showing 481 - 525 of 525 Items
Filters Clear Filters
expand_less Brand (3)
+ Show 12 More
expand_less Ways to Shop
  • Cully
  • Greenlee
  • ILSCO
Greenlee
625-2 2 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 625-2
UPC: 783310383345
Item #: 131983
Available to Order
$117.17 each
Availability
Location Available Qty
Greenlee
Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. eliminates need for center punch.
MFR: Greenlee
MFR #: 625-1-7/32
UPC: 783310383291
Item #: 138446
Available to Order
$78.98 each
Availability
Location Available Qty
Greenlee
645-1-7/32 Quick Change 1-7/32 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 645-1-7/32
UPC: 783310056980
Item #: 273
Available to Order
$55.65 each
Availability
Location Available Qty
Greenlee
1.750",44.4MM CARBIDE HOLE CUTTER
MFR: Greenlee
MFR #: 625-1-3/4
UPC: 783310383338
Item #: 201385
Available to Order
$102.07 each
Availability
Location Available Qty
Greenlee
625-1-1/2 1-1/2 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 625-1-1/2
UPC: 783310383321
Item #: 50631
Available to Order
$91.74 each
Availability
Location Available Qty
Greenlee
CARBIDE CUTTER, QUICK CHANGE, 1-5/16"
MFR: Greenlee
MFR #: 645-1-5/16
UPC: 783310059585
Item #: 322681
Available to Order
$64.70 each
Availability
Location Available Qty
Greenlee
CARBIDE CUTTER, QUICK CHANGE, 1-1/16"
MFR: Greenlee
MFR #: 645-1-1/16
UPC: 783310059578
Item #: 807431
Available to Order
$56.87 each
Availability
Location Available Qty
Greenlee
625-3/4 3/4 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 625-3/4
UPC: 783310383246
Item #: 197285
Available to Order
$63.66 each
Availability
Location Available Qty
Greenlee
SS Kit Split-point tip resists walking and penetrates material faster. Strong, high-speed steel provides superior resistance to heat and abrasion. Titanium Nitride coating ensures that the bits run cooler, drill faster, and last longer. Optimized core for signif
MFR: Greenlee
MFR #: DTAPSSKIT
UPC: 783310025801
Item #: 1085600
Available to Order
$100.33 each
Availability
Location Available Qty
Greenlee
1/4-20 Split-point tip resists walking and penetrates material faster. Strong, high-speed steel provides superior resistance to heat and abrasion. Titanium Nitride coating ensures that the bits run cooler, drill faster, and last longer. Optimized core for significantly reduced torque on the user and extended tool life. Designed to drill in up to 1/4" thick material. Durable case and quick-change adapter included
MFR: Greenlee
MFR #: DTAPSS1/4-20
UPC: 783310025740
Item #: 1176372
Available to Order
$19.45 each
Availability
Location Available Qty
Greenlee
Seven of the most common E-Z BORE bits from 1" to 2-9/16". Also includes 5-1/2" bit extension, replacement screw points, hex wrench and set screws. Double-blade design for fast, smooth cuts. Dual cutting edges can be re-sharpened for longer bit life. Large, open design won't clog with wood chips. Self-feed tip pulls bit through wood. Outer spur teeth reduce splintering and blowouts. Replaceable tip.
MFR: Greenlee
MFR #: 149H2KIT
UPC: 783310012733
Item #: 151230
Available to Order
$338.79 each
Availability
Location Available Qty
Greenlee
Quick Change D'VersiBIT Extension System Kit. 2.25' x 5" x 21.5" (57.1mm x 127mm x 539.7mm). All the same great features as a traditional flexible drill bit , but with even more flexibility and versatility. For use when drilling between studs and joists. Can use with any type of bit with a 1/4" quick change hex on it, such as spade bits, auger bits or drill bits for increased application flexibility. Replace only the bit as it wars rather than the entire bit and shaft for lower overall cost of ownership. Quickly and easily switch from drilling to pulling with the quick change pulling grip.
MFR: Greenlee
MFR #: 921-18
UPC: 783310124139
Item #: 150886
Available to Order
$59.31 each
Availability
Location Available Qty
Greenlee
Combination Drill/Tap Bits. M10 x 1.50. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.
MFR: Greenlee
MFR #: DTAPM10C
UPC: 783310121657
Item #: 1237131
Available to Order
$16.65 each
Availability
Location Available Qty
Greenlee
Quick Draw Driver. Draw studs, adapter, spacer and case. Compact, lightweight design for portability and fast, easy one-person operation. Develops 8 tons of hydraulic force for easy punching, even in 10-gauge stainless steel, depending on individual punch capacities. Right angle driver head rotates over 180 for maximum flexibility in tight working areas. Can be used with non-round punches within the capacity of the tool (adapter may be required). U.S. Patent #6,772,521.
MFR: Greenlee
MFR #: 7804-E
UPC: 783310342915
Item #: 288253
Available to Order
$1259.47 each
Availability
Location Available Qty
Greenlee
Quick Draw 90 Driver Metric. Draw studs, adapter, spacer and case. Compact, lightweight design for portability and fast, easy one-person operation. Develops 8 tons of hydraulic force for easy punching, even in 10-gauge stainless steel, depending on individual punch capacities. Right angle driver head rotates over 180 for maximum flexibility in tight working areas. Can be used with non-round punches within the capacity of the tool (adapter may be required). U.S. Patent #6,772,521.
MFR: Greenlee
MFR #: 7904-E
UPC: 783310342991
Item #: 236913
Available to Order
$1395.27 each
Availability
Location Available Qty
Greenlee
D'Versibit Type A Auger Bit. 1/2" (12.7 mm) bit diameter, 54" (1371.6 mm) long with a 3/16" (4.8 mm) shaft diameter. Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval.
MFR: Greenlee
MFR #: 08-03-54A
UPC: 783310380733
Item #: 154900
Available to Order
$83.85 each
Availability
Location Available Qty
Greenlee
D'Versibit Type A Auger Bit. 3/4" (19.1 mm) bit diameter, 72" (1828.8 mm) long with a 1/4" (6.4 mm) shaft diameter. Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval.
MFR: Greenlee
MFR #: 12-04-72A
UPC: 783310380849
Item #: 161312
Available to Order
$97.43 each
Availability
Location Available Qty
Greenlee
Nail Eater Extreme Impact Bit 9/16" (14.3 mm) x 18". Quickly bore through creosoted and salt-treated utility poles. Resists wear, eats through nails and staples. Self-feeding screw point draws the bit through the wood. 7/16 IN hex shank to fit impact drivers.
MFR: Greenlee
MFR #: 37868
UPC: 783310378686
Item #: 961458
Available to Order
$50.36 each
Availability
Location Available Qty
Greenlee
Slug-Splitter SC Knockout Punch Kit for 1/2" - 2" Conduit Size with Hydraulic Ram and Hand Pump. Capacities up through 10 gauge (3.5mm) stainless steel. Self centering punch aligns itself on pilot hole. Includes punches, dies and draw stud in metal case.
MFR: Greenlee
MFR #: 7506
UPC: 783310303855
Item #: 191925
Available to Order
$2667.07 each
Availability
Location Available Qty
Greenlee
Slug-Splitter SC Knockout Punch Kit for 1/2" - 2" Conduit Size. Capacities up through 10 gauge (3.5mm) stainless steel. Self centering punch aligns itself on pilot hole. Includes punches, dies and draw stud in metal case. Driver not included.
MFR: Greenlee
MFR #: 7307
UPC: 783310295280
Item #: 22975
Available to Order
$1945.32 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 3". Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-3
UPC: 783310191674
Item #: 167653
Available to Order
$19.55 each
Availability
Location Available Qty
Greenlee
Die Kit 12 Ton Aluminum U Style
MFR: Greenlee
MFR #: KD12AL
UPC: 783310102618
Item #: 314931
Available to Order
$1985.89 each
Availability
Location Available Qty
Greenlee
CrImping Die 12 Ton U-Style Die Burndy equivalent U-238. Dies are use with service entrance connectors, C-Taps, H-Taps, overhead and underground connectors.
MFR: Greenlee
MFR #: KD12-35
UPC: 783310102052
Item #: 1085131
Available to Order
$128.65 each
Availability
Location Available Qty
Greenlee
Hex-Al 4/0 Die for crimping color-coded aluminum lugs and splices. Requires UA22 adapter when used with ECCXL, HCCX, & RCCX tools.
MFR: Greenlee
MFR #: KA22-4/0
UPC: 783310067535
Item #: 44096
Available to Order
$139.05 each
Availability
Location Available Qty
Greenlee
Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 24 FT collapses to 50 IN x 2 1/4 IN and uses snap-lock buttons to maintain extended reach capabilities. Install suspension wires for drop ceilings.
MFR: Greenlee
MFR #: FP24
UPC: 783310104438
Item #: 140372
Available to Order
$369.27 each
Availability
Location Available Qty
Greenlee
Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 18 FT collapses to 27 IN x 2 IN and uses friction-locking system. Install suspension wires for drop ceilings.
MFR: Greenlee
MFR #: FP18
UPC: 783310104421
Item #: 49991
Available to Order
$223.83 each
Availability
Location Available Qty
Greenlee
Spade Bit 1-1/2" Hole Diameter. 6-1/4" long with 1/4" hex shank. Bore hardwood, softwood, plywood and drywall. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling.
MFR: Greenlee
MFR #: 33A-1-1/2
UPC: 783310203612
Item #: 138735
Available to Order
$9.57 each
Availability
Location Available Qty
Greenlee
Kwik Cycle Die Set (1,14mm-6mm). 26-10 AWG. For non-insulated and insulated wire ferrules
MFR: Greenlee
MFR #: 3283
UPC: 783310032830
Item #: 47194
Available to Order
$57.62 each
Availability
Location Available Qty
Greenlee
Works with any crimping tool that accepts 12-ton "U" type dies. Less costly than dedicated cutting tools. Simple to install in crimping tools. Requires no adjustments for cutting different materials. Will cleanly cut guy wire (including EHS), grade 60 rebar, ground rod, soft steel bolts up to 5/8 (16 mm) and up to477 kcmil (MCM)(240 mm2) ACSR. U.S. Patent Number 5,775,158
MFR: Greenlee
MFR #: 949
UPC: 783310009498
Item #: 1224563
Available to Order
$569.93 each
Availability
Location Available Qty
Greenlee
DIE SET (50029126)
MFR: Greenlee
MFR #: WB.1471
UPC: 783310029120
Item #: 200686
Available to Order
$216.86 each
Availability
Location Available Qty
Greenlee
4 AWG Copper Die for crimping color-coded aluminum lugs and splices. Requires UA22 adapter when used with ECCXL, HCCX, & RCCX tools.
MFR: Greenlee
MFR #: KC22-4
UPC: 783310030812
Item #: 596708
Available to Order
$130.16 each
Availability
Location Available Qty
Greenlee
Bit Extension, 18" with 5/16" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.
MFR: Greenlee
MFR #: 902-18
UPC: 783310027072
Item #: 122129
Available to Order
$51.47 each
Availability
Location Available Qty
Greenlee
E-Z Bore Self-Feed Bit 1-1/8" (28.6 mm). Double-blade design for fast, smooth cuts. Dual cutting edges can be re-sharpened for longer bit life. Large, open design won't clog with wood chips. Self-feed tip pulls bit through wood. Outer spur teeth reduce splintering and blowouts. Replaceable tip.
MFR: Greenlee
MFR #: 149H2-1-1/8
UPC: 783310012504
Item #: 207840
Available to Order
$45.20 each
Availability
Location Available Qty
Greenlee
HOUSING UNIT (GREEN 12T PISTOL) (52049229)
MFR: Greenlee
MFR #: HB.10018
UPC: 783310101130
Item #: 117634
Available to Order
$58.19 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw Kit for 1/2" - 4" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.
MFR: Greenlee
MFR #: 835
UPC: 783310275381
Item #: 110816
Available to Order
$252.66 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Blade for the 35715 6-7/8" Holesaw.
MFR: Greenlee
MFR #: 35723
UPC: 783310357230
Item #: 103170
Available to Order
$38.31 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 4-1/8" (104.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-4-1/8
UPC: 783310191773
Item #: 13045
Available to Order
$30.64 each
Availability
Location Available Qty
Greenlee
Quick Change Hole Saw Kit. New arbor allows for rapid mounting or removal of hole saws. Faster, easier slug removal. Drill pilot hole without saw. Eliminates the "bite"" when saw crashes into the steel. Provides better ergonomics - reduces stress on wrist, arm and hand. Eliminates obstructed view from hole saw. Only one arbor required from 7/8" to 6" (7/16" shank recommended for hole saws above 2-1/2"). Works with recessed light and carbide grit hole saw products as well. Adapters re-usable to minimize costs. Universal - works with any brand hole saw. Kit contains Bi-metal holesaws for 1/2" - 2" conduit sizes.
MFR: Greenlee
MFR #: 830Q
UPC: 783310028062
Item #: 82272
Available to Order
$272.45 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (47.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1-7/8
UPC: 783310191544
Item #: 103684
Available to Order
$18.39 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2-3/4" (69.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2-3/4
UPC: 783310191650
Item #: 144701
Available to Order
$24.32 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2-1/4" (57.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2-1/4
UPC: 783310191599
Item #: 2948
Available to Order
$22.63 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Steel Toothed 4-3/8" (111mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.
MFR: Greenlee
MFR #: 35712
UPC: 783310357124
Item #: 162634
Available to Order
$84.27 each
Availability
Location Available Qty
Greenlee
PLATE-RETAINING (50385445)
MFR: Greenlee
MFR #: 38544
UPC: 783310385448
Item #: 107786
Available to Order
$27.53 each
Availability
Location Available Qty
Greenlee
Shank Arbor with High-Speed Steel Pilot Drill Bit. 1/4" shank, 1/4" minimum chuck size. Use with 9/16" - 1-3/16" Hole Saws. The best arbor in the industry ensures a solid connection without any gaps or wobbling. Arbors include replaceable, high-speed steel pilot drill. Pilot drills have unique split-point tip design. Use with Greenlee bi-metal hole saws, recessed light holesaws and carbide-grit hole saws (carbide-tipped pilot drill sold separately). Can be used with Greenlee #901 or #904 bit extensions.
MFR: Greenlee
MFR #: 37157
UPC: 783310371571
Item #: 140709
In Stock -
$21.00 each
Availability
Location Available Qty
Greenlee
BEARING (BUNTING #FL102-12) (90548388)
MFR: Greenlee
MFR #: 54838
UPC: 783310548386
Item #: 1244408
Available to Order
$29.34 each
Availability
Location Available Qty