Hole Saws

Showing 145 - 159 of 159 Items
Filters Clear Filters
expand_less Brand (2)
+ Show 1 More
expand_less Ways to Shop
  • Greenlee
  • Klein Tools
Greenlee
CARBIDE CUTTER, QUICK CHANGE, 1-1/16"
MFR: Greenlee
MFR #: 645-1-1/16
UPC: 783310059578
Item #: 807431
Available to Order
$56.87 each
Availability
Location Available Qty
Greenlee
625-3/4 3/4 inch Carbide Tipped Hole Cutter
MFR: Greenlee
MFR #: 625-3/4
UPC: 783310383246
Item #: 197285
Available to Order
$63.66 each
Availability
Location Available Qty
Greenlee
Quick Change D'VersiBIT Extension System Kit. 2.25' x 5" x 21.5" (57.1mm x 127mm x 539.7mm). All the same great features as a traditional flexible drill bit , but with even more flexibility and versatility. For use when drilling between studs and joists. Can use with any type of bit with a 1/4" quick change hex on it, such as spade bits, auger bits or drill bits for increased application flexibility. Replace only the bit as it wars rather than the entire bit and shaft for lower overall cost of ownership. Quickly and easily switch from drilling to pulling with the quick change pulling grip.
MFR: Greenlee
MFR #: 921-18
UPC: 783310124139
Item #: 150886
Available to Order
$59.31 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 3". Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-3
UPC: 783310191674
Item #: 167653
Available to Order
$19.55 each
Availability
Location Available Qty
Greenlee
Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 24 FT collapses to 50 IN x 2 1/4 IN and uses snap-lock buttons to maintain extended reach capabilities. Install suspension wires for drop ceilings.
MFR: Greenlee
MFR #: FP24
UPC: 783310104438
Item #: 140372
Available to Order
$369.27 each
Availability
Location Available Qty
Greenlee
Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 18 FT collapses to 27 IN x 2 IN and uses friction-locking system. Install suspension wires for drop ceilings.
MFR: Greenlee
MFR #: FP18
UPC: 783310104421
Item #: 49991
Available to Order
$223.83 each
Availability
Location Available Qty
Greenlee
Bit Extension, 18" with 5/16" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.
MFR: Greenlee
MFR #: 902-18
UPC: 783310027072
Item #: 122129
Available to Order
$51.47 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw Kit for 1/2" - 4" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.
MFR: Greenlee
MFR #: 835
UPC: 783310275381
Item #: 110816
Available to Order
$252.66 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Blade for the 35715 6-7/8" Holesaw.
MFR: Greenlee
MFR #: 35723
UPC: 783310357230
Item #: 103170
Available to Order
$38.31 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 4-1/8" (104.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-4-1/8
UPC: 783310191773
Item #: 13045
Available to Order
$30.64 each
Availability
Location Available Qty
Greenlee
Quick Change Hole Saw Kit. New arbor allows for rapid mounting or removal of hole saws. Faster, easier slug removal. Drill pilot hole without saw. Eliminates the "bite"" when saw crashes into the steel. Provides better ergonomics - reduces stress on wrist, arm and hand. Eliminates obstructed view from hole saw. Only one arbor required from 7/8" to 6" (7/16" shank recommended for hole saws above 2-1/2"). Works with recessed light and carbide grit hole saw products as well. Adapters re-usable to minimize costs. Universal - works with any brand hole saw. Kit contains Bi-metal holesaws for 1/2" - 2" conduit sizes.
MFR: Greenlee
MFR #: 830Q
UPC: 783310028062
Item #: 82272
Available to Order
$272.45 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (47.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-1-7/8
UPC: 783310191544
Item #: 103684
Available to Order
$18.39 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2-3/4" (69.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2-3/4
UPC: 783310191650
Item #: 144701
Available to Order
$24.32 each
Availability
Location Available Qty
Greenlee
Bi-Metal Hole Saw, Actual Hole Size 2-1/4" (57.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.
MFR: Greenlee
MFR #: 825-2-1/4
UPC: 783310191599
Item #: 2948
Available to Order
$22.63 each
Availability
Location Available Qty
Greenlee
Recessed Light Hole Saw Steel Toothed 4-3/8" (111mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.
MFR: Greenlee
MFR #: 35712
UPC: 783310357124
Item #: 162634
Available to Order
$84.27 each
Availability
Location Available Qty