Screwdrivers

CULLY

MegaProof 16-in-1 Tamperproof Screwdriver, Star Pin (T10H,T15H,T20H,T25H,T27H and T30H), Socket Pin (1/8,9/64,5/32 and 3/16), Spanner (#6,#8,#10 and #12) and Square (#1 and #2), Gray

MFR: Minerallac

MFR #: 37011

UPC: 085937370112

Item #: 177352

CULLY

6-In-1 Economy Screwdriver, Phillips (#1 and #2), Slotted (1/4 and 3/16") and Hex (1/4 and 5/16"), Orange

MFR: Minerallac

MFR #: 37014

UPC: 085937370143

Item #: 165454

CULLY

#6 and #8 Spanner Double Ended Replacement Bits

MFR: Minerallac

MFR #: 69006

UPC: 085937690067

Item #: 664496

T&B ELEC SUPPL

18-266 T&B Screw Starter, 9 in L, Nylon

MFR: ABB - Installation Products

MFR #: 18-266

UPC: 783786182664

Item #: 15209

Greenlee

Deburs ID and OD of 1/2 IN, 3/4 IN and 1 IN thin wall conduit. Handle marked for easy identification. Hardened blade for longer life. Hooded, flat tip driver used to fasten EMT fittings. Soft, cushioned grip for extra comfort and torque. Replaceable blade. Lifetime limited warranty. Note: This is not an insulated tool.

9753-11C Conduit Reaming Screwdriver, Hooded/Flat Point, 7-7/16 in OAL, Black Oxide

MFR: Greenlee

MFR #: 9753-11C

UPC: 783310546962

Item #: 122859

Greenlee

9953-13 High Grade Replacement Bit Set, 4 Pieces, Hardened Steel, Polished Chrome

MFR: Greenlee

MFR #: 9953-13

UPC: 783310563105

Item #: 60798

Greenlee

Versatile multi-bit screwdriver, 6 tools in one. Precision machined, hardened steel bits. High-grade, rust resistant, chrome-plated finish. Soft, cushioned grip for extra comfort and torque. Lifetime limited warranty. Note: This is not an insulated tool.

0153-42C 6-in-1 Multi-Tool Driver, 4 Pieces, Cushion Grip Handle, Hardened Steel, ASME Specified

MFR: Greenlee

MFR #: 0153-42C

UPC: 783310563082

Item #: 61032

Greenlee

Integrated screwdriver and nut driver reduces the number of tools needed for a job. One tool that can work on slotted and Phillips screws. Bits stored inside the shank are quickly and easily interchanged. Cushioned grip for extra comfort. Lifetime limited warranty

0153-47C 11-in-1 Hollow Round Shank Magnetic Multi-Tool, 11 Tools

MFR: Greenlee

MFR #: 0153-47C

UPC: 783310083634

Item #: 968710

Greenlee

Heavy-Duty Cabinet Tip Screwdriver. 3/16" round shank x 6" flat blade screwdriver. Narrow cabinet tip for limited access applications. Handle marked for easy identification of screwdriver size, type and length. Precision-machined tips for accurate fastener contact. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-22C Heavy Duty Screwdriver, 3/16 in Slotted Point, Steel Shank, 9-3/4 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

MFR: Greenlee

MFR #: 0153-22C

UPC: 783310546535

Item #: 203584

Greenlee

Heavy-Duty Phillips Tip Screwdriver #3 x 6". Precision-machined tips for exact fit. Handle marked for easy identification of screwdriver size, type and length. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-35C Heavy Duty Screwdriver, #3 Phillips Point, Steel Shank, 11 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

MFR: Greenlee

MFR #: 0153-35C

UPC: 783310546603

Item #: 655505

Greenlee

Stubby Screwdriver, Round Shank 1/4" x 1-1/2" Flat Blade. Precision-machined tips for exact fit. Handle marked for easy identification of screwdriver size, type and length. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-28C Stubby Screwdriver, 1/4 in Slotted Point, Hardened Steel Shank, 3 in OAL, Black Phosphate Plated, ASME Specified

MFR: Greenlee

MFR #: 0153-28C

UPC: 783310546481

Item #: 202293

Greenlee

Replacement bits for 11-in-1 Multi-Tool (Cat# 0153-47C). Bits stored inside the shank are quickly and easily interchanged. High-grade, rust resistant,chrome-plated finish

9953-20 Replacement Bit Set, 7 Pieces, 7.94 in OAL, Steel, Polished Chrome

MFR: Greenlee

MFR #: 9953-20

UPC: 783310083641

Item #: 1278646

Greenlee

Insulated Cabinet Tip Screwdriver 1/4" x 4". Rated to 1000V AC and exceed both ASTM and IEC standards. Precision-machined tips for exact fit. Cushion grip handles for comfort and torque. Handle marked for easy identification of screwdriver size, type and length. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Lifetime limited warranty.

0153-11-INS Heavy Duty Screwdriver, 1/4 in Cabinet Point, Steel Shank, 8-1/4 in OAL, Black Phosphate Plated, ASTM Approved

MFR: Greenlee

MFR #: 0153-11-INS

UPC: 783310134435

Item #: 595093

Greenlee

Exceeds the IEC 60900 and ASTM F1505 standards for insulated tools. Complies with the IEC 60900 & ASTM F1505 standards. Helps meet the requirements of OSHA 1910.331-335, NFPA 70E & CSA-Z462. Individually tested to 10,000 VAC & rated for 1,000 VAC. Dual layer insulation provides added safety and protection against electric shock. Custom Tool Roll-Up Carrier. Lifetime limited warranty

0153-01-INS Screwdriver Set, 9 Pieces, ASTM F1505, Acetate Handle/Steel Shank, Black Oxide

MFR: Greenlee

MFR #: 0153-01-INS

UPC: 783310134398

Item #: 197511

Greenlee

Precision machined tips for exact fastener fit. Strong durable black phosphate tips to prevent chipping or plating. Handle marked for easy identification of screwdriver size and type. Soft, cushioned grip for extra comfort and no slipping. Designed to meet ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-03C Mini Screwdriver Set, 4 Pieces, ASME Specified, Acetate Handle/SVCM Steel Shank, Black Phosphate

MFR: Greenlee

MFR #: 0153-03C

UPC: 783310134381

Item #: 142986

Greenlee

Heavy-Duty Phillips Tip Screwdriver #2 x 10". Precision-machined tips for exact fit. Handle marked for easy identification of screwdriver size, type and length. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-36C Heavy Duty Screwdriver, #2 Phillips Point, Steel Shank, 14-5/16 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

MFR: Greenlee

MFR #: 0153-36C

UPC: 783310892137

Item #: 605059

Greenlee

Heavy-Duty Keystone Tip Screwdriver 3/8" x 8". Square shank allows use of wrench or pliers for added torque. Precision-machined tips for exact fit. Handle marked for easy identification of screwdriver size, type and length. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-15C Heavy Duty Screwdriver, 5/16 in Slotted Point, Hardened Steel Shank, 10-15/16 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

MFR: Greenlee

MFR #: 0153-15C

UPC: 783310563044

Item #: 51732

Greenlee

Heavy-Duty Phillips Tip Screwdriver #2 x 4". Precision-machined tips for exact fit. Handle marked for easy identification of screwdriver size, type and length. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-33C Heavy Duty Screwdriver, #2 Phillips Point, Hardened Steel Shank, 8-5/16 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

MFR: Greenlee

MFR #: 0153-33C

UPC: 783310546580

Item #: 59543

Greenlee

Screw-Holding Screwdriver 3/16" x 6". The industry's finest screw-holding device, available for either slotted or Phillips screws. Easily holds screw in place when installing in hard-to-reach locations. Precision tip for accurate fastener fit. Heavy-duty construction for longer life. Soft, cushioned grip for extra comfort and torque. Handle marked for easy identification of screwdriver size and type. Lifetime limited warranty. Note: This is not an insulated tool.

0453-14C Heavy Duty Screw Holding Screwdriver, 3/16 in Slotted Point, Steel Shank, 8-5/8 in OAL, Acetate Handle, Black Phosphate/Polished Chrome, ASME Specified

MFR: Greenlee

MFR #: 0453-14C

UPC: 783310563143

Item #: 104715

Greenlee

Heavy-Duty Cabinet Tip Screwdriver. 3/16" round shank x 10" flat blade screwdriver. Narrow cabinet tip for limited access applications. Handle marked for easy identification of screwdriver size, type and length. Precision-machined tips for accurate fastener contact. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-24C Flat Blade Heavy Duty Screwdriver, 3/16 in Cabinet Point, Steel Shank, 13-3/4 in OAL, Acetate Handle, Phosphate Plated

MFR: Greenlee

MFR #: 0153-24C

UPC: 783310546559

Item #: 302948

Greenlee

Heavy-Duty Phillips Tip Screwdriver #2 x 6". Precision-machined tips for exact fit. Handle marked for easy identification of screwdriver size, type and length. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-34C Heavy Duty Screwdriver, #2 Phillips Point, Steel Shank, 10-5/16 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

MFR: Greenlee

MFR #: 0153-34C

UPC: 783310546597

Item #: 60246

Greenlee

Heavy-Duty Phillips Tip Screwdriver #1 x 3". Precision-machined tips for exact fit. Handle marked for easy identification of screwdriver size, type and length. Strong, durable black phosphate tips prevent chipping of plating. Soft, cushioned grip for extra comfort and torque. Exceeds ASME/ANSI specifications. Lifetime limited warranty. Note: This is not an insulated tool.

0153-31C Heavy Duty Screwdriver, #1 Phillips Point, Steel Shank, 6-3/4 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

MFR: Greenlee

MFR #: 0153-31C

UPC: 783310546566

Item #: 212160

Greenlee

0153-12C Flat Blade Heavy Duty Screwdriver, 1/4 in Slotted Point, Steel Shank, 10-11/32 in OAL, Acetate Handle, Phosphate Plated

MFR: Greenlee

MFR #: 0153-12C

UPC: 783310546450

Item #: 605054

Greenlee

Sufficiently tightens connections to comply with the new National Electric Code (110.14D). Ensures connections are tightened to the correct torque rating, eliminating the need for guesswork. Prevents fires and other hazards caused by improperly torqued connections. Durable, compact case provides optimal tool protection. Bit sizes are printed inside of the case for easy identification. Calibrated within tolerance according to: ASME B107.300-2010 (Certificate Included). Driver made in USA.

0153-46T Round Shank Torque Screwdriver and Bit Set, 5-1/8 in OAL, 5 to 40 in-lb, Hardened Steel

MFR: Greenlee

MFR #: 0153-46T

UPC: 783310083603

Item #: 996327

Categories

Filters

MegaProof 16-in-1 Tamperproof Screwdriver, Star Pin (T10H,T15H,T20H,T25H,T27H and T30H), Socket Pin (1/8,9/64,5/32 and 3/16), Spanner (#6,#8,#10 and #12) and Square (#1 and #2), Gray

6-In-1 Economy Screwdriver, Phillips (#1 and #2), Slotted (1/4 and 3/16") and Hex (1/4 and 5/16"), Orange

#6 and #8 Spanner Double Ended Replacement Bits

18-266 T&B Screw Starter, 9 in L, Nylon

9753-11C Conduit Reaming Screwdriver, Hooded/Flat Point, 7-7/16 in OAL, Black Oxide

9953-13 High Grade Replacement Bit Set, 4 Pieces, Hardened Steel, Polished Chrome

0153-42C 6-in-1 Multi-Tool Driver, 4 Pieces, Cushion Grip Handle, Hardened Steel, ASME Specified

0153-47C 11-in-1 Hollow Round Shank Magnetic Multi-Tool, 11 Tools

0153-22C Heavy Duty Screwdriver, 3/16 in Slotted Point, Steel Shank, 9-3/4 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

0153-35C Heavy Duty Screwdriver, #3 Phillips Point, Steel Shank, 11 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

0153-28C Stubby Screwdriver, 1/4 in Slotted Point, Hardened Steel Shank, 3 in OAL, Black Phosphate Plated, ASME Specified

9953-20 Replacement Bit Set, 7 Pieces, 7.94 in OAL, Steel, Polished Chrome

0153-11-INS Heavy Duty Screwdriver, 1/4 in Cabinet Point, Steel Shank, 8-1/4 in OAL, Black Phosphate Plated, ASTM Approved

0153-01-INS Screwdriver Set, 9 Pieces, ASTM F1505, Acetate Handle/Steel Shank, Black Oxide

0153-03C Mini Screwdriver Set, 4 Pieces, ASME Specified, Acetate Handle/SVCM Steel Shank, Black Phosphate

0153-36C Heavy Duty Screwdriver, #2 Phillips Point, Steel Shank, 14-5/16 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

0153-15C Heavy Duty Screwdriver, 5/16 in Slotted Point, Hardened Steel Shank, 10-15/16 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

0153-33C Heavy Duty Screwdriver, #2 Phillips Point, Hardened Steel Shank, 8-5/16 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

0453-14C Heavy Duty Screw Holding Screwdriver, 3/16 in Slotted Point, Steel Shank, 8-5/8 in OAL, Acetate Handle, Black Phosphate/Polished Chrome, ASME Specified

0153-24C Flat Blade Heavy Duty Screwdriver, 3/16 in Cabinet Point, Steel Shank, 13-3/4 in OAL, Acetate Handle, Phosphate Plated

0153-34C Heavy Duty Screwdriver, #2 Phillips Point, Steel Shank, 10-5/16 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

0153-31C Heavy Duty Screwdriver, #1 Phillips Point, Steel Shank, 6-3/4 in OAL, Acetate Handle, Black Phosphate Plated, ASME Specified

0153-12C Flat Blade Heavy Duty Screwdriver, 1/4 in Slotted Point, Steel Shank, 10-11/32 in OAL, Acetate Handle, Phosphate Plated

0153-46T Round Shank Torque Screwdriver and Bit Set, 5-1/8 in OAL, 5 to 40 in-lb, Hardened Steel