Clamp Meters

Showing 1 - 14 of 14 Items
Filters Clear Filters
expand_less Brand (2)
expand_less Ways to Shop
  • Amprobe
  • Milwaukee
Amprobe
If an industrial or utility testing application demands a higher level of safety, reach for this CAT IV rated Clamp Meter, the ACDC-3400 IND. Including true-rms sensing for accuracy this clamp on meter's extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple.
MFR: Fluke
MFR #: ACDC-3400-IND
UPC: 095969492683
Item #: 411689
Available to Order
$1114.74 each
Availability
Location Available Qty
Milwaukee
Milliamp Clamp Meter
MFR: Milwaukee Electric Tool
MFR #: 2231-20NST
UPC: 045242341122
Item #: 1155721
Available to Order
$958.00 each
Availability
Location Available Qty
Amprobe
True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus Minus (1 PCT RDG + 3 LSD) For Resistance, Plus Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use
MFR: Fluke
MFR #: ACDC-52NAV
UPC: 095969556651
Item #: 607349
Available to Order
$798.94 each
Availability
Location Available Qty
Amprobe
Take this clamp meter to extremes. Most digital clamp meters have LCD screens that tend to freeze below 32 degrees (0 degrees Celcius) but the Amprobe RS-1007 PRO, an analog clamp meter can take extreme heat or cold and keep on measuring amps and volts-without problems or batteries.
MFR: Fluke
MFR #: RS-1007-PRO
UPC: 095969497725
Item #: 35794
Available to Order
$481.68 each
Availability
Location Available Qty
Amprobe
Complete with a full range of diagnostic capabilities including phase sequence, power and power factor, total harmonics distortion and individual harmonics, inrush current and low pass filter, the Amprobe Navigator Clamp On Meter serves as a first line of defense for power monitoring and verifying system conditions before deploying more specialized tools -- or incurring additional costs. Rated CAT IV 600 V/CAT III 1000 V, these clamp on meters offer a new innovative navigation system that eliminates confusing push buttons, and replaces them with a single joystick. Its all about easy and reliable measurements. Amprobes new line of Navigator Clamp On Meters feature quick, easy to use single hand selection of measurements. The joy stick control allows quick selection of measurement features on the display from MAX -MIN to power factor to AC- DC current, with many more available. Simply highlight the desired measurement feature using the joy stick and press to select. Rugged and CAT IV reliable, this clamp on meter also features, super bright backlight display, built-in jaw flashlight and over mold bodies to absorb shock -- all you need for commercial and industrial environments.
MFR: Fluke
MFR #: ACDC-54NAV
UPC: 095969556675
Item #: 160820
Available to Order
$992.49 each
Availability
Location Available Qty
Amprobe
Low Current Clamp On Ammeter, Amperage Rating: AC DC: 4 AMP, 40 AMP, Frequency Rating: 40 HZ - 400 HZ In AC, Measuring Range: 0 - 40 AMP DC Or AC Peak, Operating Temperature: 0 - 50 DEG C, Dimensions: 184 MM Length X 71 MM Width X 31 MM Height, Battery Type: 9 V, Alkaline PP3, NEDA 1604, Display: 4000 Count,10 MM High Characters, Maximum Jaw Opening: 19 MM Cable, Maximum Jaw Opening: 20 MM, Accuracy: Plus-Minus (1.3PCT + 5 Digits), Temperature coefficient: Plus-Minus 0.05PCT Of RDG-DEGC, Resolution: 1 MILAMP In 4 AMP Range, 10 MILAMP In 40 AMP Range, Autoranging: 4 AMP-40 AMP, CE Certified, CAT III 300V
MFR: Fluke
MFR #: LH41A
UPC: 095969416542
Item #: 783715
Available to Order
$1204.97 each
Availability
Location Available Qty
Amprobe
This current transformer probe measures AC or DC current. It converts high current to a low level millivolt signal for input directly into a test instrument. It can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.
MFR: Fluke
MFR #: CT235A
UPC: 095969414586
Item #: 607872
Available to Order
$519.52 each
Availability
Location Available Qty
Amprobe
Amprobe Clamp Multimeter with leakage current capability measures low AC current in the microamps. Great for applications requiring measurement of leakage and fault currents.
MFR: Fluke
MFR #: AC50A
UPC: 095969416719
Item #: 764819
Available to Order
$1031.79 each
Availability
Location Available Qty
Amprobe
User-friendly and accurate. Think safety and Amprobes ground resistance tester second. Use the on-board memory and data logging features to make your work more efficient.
MFR: Fluke
MFR #: DGC-1000A
UPC: 095969366311
Item #: 194199
Available to Order
$4480.85 each
Availability
Location Available Qty
Amprobe
True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus-Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus-Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus/Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus-Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus-Minus (1 PCT RDG + 3 LSD) For Resistance, Plus-Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus-Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use
MFR: Fluke
MFR #: ACD-50NAV
UPC: 095969556637
Item #: 158794
In Stock -
$601.02 each
Availability
Location Available Qty
Amprobe
Small size doesnt mean small features. This Amprobe Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction and CAT III 600V rating, this meter is a must-have professional troubleshooting tool for commercial electricians and electrical contractors.
MFR: Fluke
MFR #: AMP-25
UPC: 095969778787
Item #: 390952
Available to Order
$321.60 each
Availability
Location Available Qty
Discontinued
Amprobe
This CAT IV rated ACD-3300IND Clamp On Tester is ideal for industrial applications and utilities that require an extra level of safety. Including true-rms sensing for accuracy, this clamp on meter's extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple.
MFR: Fluke
MFR #: ACD-3300-IND
UPC: 095969492676
Item #: 411690
Available to Order
$733.45 each
Availability
Location Available Qty
Discontinued
Amprobe
The Amprobe ACD-40 provides a simple and effective way to verify if the electrical system is affected by harmonics. Add on troubleshooting capabilities with the ACD-40PQ data-logging feature or get complete power analysis with the ACD-41PQ. Increase measuring efficiency with an optional PC interface kit.
MFR: Fluke
MFR #: ACD-41PQ
UPC: 095969365864
Item #: 230920
Available to Order
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Discontinued
Amprobe
RS-3-PRO Analog Clamp Meter, CAT IV, 600V, 300 Amp
MFR: Fluke
MFR #: RS-3-PRO
UPC: 095969497718
Item #: 26968
Available to Order
$414.74 each
Availability
Location Available Qty