Hole Saws | Crescent Electric Supply Company

Greenlee

825-3-1/2 Variable Pitch Variable Pitch Hole Saw, 3-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3-1/2

UPC: 783310191711

Item #: 10250

Greenlee

825-2-3/8 Variable Pitch Variable Pitch Hole Saw, 2-3/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-3/8

UPC: 783310191612

Item #: 4374

Greenlee

825-2-7/8 Variable Pitch Hole Saw With Fixed Pockets, 2-7/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-7/8

UPC: 783310191667

Item #: 271345

Greenlee

904H-18 Bit Extension, Hex Drive, 18 in OAL

MFR: Greenlee

MFR #: 904H-18

UPC: 783310353560

Item #: 144619

Greenlee

11180 Hole Saw Cutter Set With Fixed Pockets, 3 Pieces, For Use With Deburring Tool

MFR: Greenlee

MFR #: 11180

UPC: 783310111801

Item #: 226448

Greenlee

645-13/16 Quick-Change Hole Cutter, 13/16 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 645-13/16

UPC: 783310056942

Item #: 200095

Greenlee

Quick Change Carbide Tipped Hole Cutter 1-11/16" (42.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a rn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

645-11/16 Quick-Change Hole Cutter, 11/16 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 645-11/16

UPC: 783310056928

Item #: 200274

Greenlee

645-1-1/2 Quick Change 1-1/2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1-1/2

UPC: 783310057017

Item #: 79215

Greenlee

Quick Change Carbide Tipped Hole Cutter 2-1/8" (54.0 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

645-2-1/8 Quick-Change Hole Cutter, 2-1/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 645-2-1/8

UPC: 783310059608

Item #: 91376

Greenlee

Carbide-Tipped Hole Cutter 1" (25.4mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.

625-1 Hole Cutter, 1 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 625-1

UPC: 783310383277

Item #: 329958

Greenlee

625-2 2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-2

UPC: 783310383345

Item #: 131983

Greenlee

Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. eliminates need for center punch.

625-1-7/32 Hole Cutter, 1-7/32 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 625-1-7/32

UPC: 783310383291

Item #: 138446

Greenlee

645-1-7/32 Quick Change 1-7/32 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1-7/32

UPC: 783310056980

Item #: 273

Greenlee

625-1-3/4 Hole Cutter, 1-3/4 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 625-1-3/4

UPC: 783310383338

Item #: 201385

Greenlee

625-1-1/2 1-1/2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-1-1/2

UPC: 783310383321

Item #: 50631

Greenlee

645-1-5/16 Quick-Change Hole Cutter, 1-5/16 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 645-1-5/16

UPC: 783310059585

Item #: 322681

Greenlee

645-1-1/16 Quick-Change Hole Cutter, 1-1/16 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 645-1-1/16

UPC: 783310059578

Item #: 807431

Greenlee

625-3/4 3/4 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-3/4

UPC: 783310383246

Item #: 197285

Greenlee

Quick Change D'VersiBIT Extension System Kit. 2.25' x 5" x 21.5" (57.1mm x 127mm x 539.7mm). All the same great features as a traditional flexible drill bit , but with even more flexibility and versatility. For use when drilling between studs and joists. Can use with any type of bit with a 1/4" quick change hex on it, such as spade bits, auger bits or drill bits for increased application flexibility. Replace only the bit as it wars rather than the entire bit and shaft for lower overall cost of ownership. Quickly and easily switch from drilling to pulling with the quick change pulling grip.

921-18 DVersiBIT Quick-Change Bit Extension, 18 in OAL

MFR: Greenlee

MFR #: 921-18

UPC: 783310124139

Item #: 150886

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 3". Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-3 Variable Pitch Hole Saw, 3 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3

UPC: 783310191674

Item #: 167653

Greenlee

725-3-5/8 Hole Saw, 3-5/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-3-5/8

UPC: 783310100812

Item #: 188118

Greenlee

Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 24 FT collapses to 50 IN x 2 1/4 IN and uses snap-lock buttons to maintain extended reach capabilities. Install suspension wires for drop ceilings.

FP24 Non-Conductive Fish Pole, 2-1/4 in Dia x 50 in L, Fiberglass, Green

MFR: Greenlee

MFR #: FP24

UPC: 783310104438

Item #: 140372

Greenlee

FP18 Non-Conductive Fish Pole, 2 in Dia x 27 in L, Fiberglass, Green

MFR: Greenlee

MFR #: FP18

UPC: 783310104421

Item #: 49991

Greenlee

Bit Extension, 18" with 5/16" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.

902-18 Power Bit Extension With Fixed Pockets, 5/16 in Shank, 18 in L, 21/32 in Dia Body

MFR: Greenlee

MFR #: 902-18

UPC: 783310027072

Item #: 122129

Greenlee

835 Hole Saw Kit, 13 Pieces, For Use With 1/2 to 4 in Conduit, Bi-Metal

MFR: Greenlee

MFR #: 835

UPC: 783310275381

Item #: 110816

Greenlee

35723 Replacement Replacement Blade, For Use With 35715 6-7/8 in Steel Toothed Recessed Light Hole Saw, Steel

MFR: Greenlee

MFR #: 35723

UPC: 783310357230

Item #: 103170

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 4-1/8" (104.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-4-1/8 Variable Pitch Hole Saw, 4-1/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4-1/8

UPC: 783310191773

Item #: 13045

Greenlee

830Q Quick Change Hole Saw Kit, For Use With 1/2 to 2 in Conduit, Bi-Metal

MFR: Greenlee

MFR #: 830Q

UPC: 783310028062

Item #: 82272

Greenlee

825-1-7/8 Variable Pitch Variable Pitch Hole Saw, 1-7/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-7/8

UPC: 783310191544

Item #: 103684

Greenlee

825-2-3/4 Variable Pitch Variable Pitch Hole Saw, 2-3/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-3/4

UPC: 783310191650

Item #: 144701

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2-1/4" (57.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-2-1/4 Variable Pitch Hole Saw, 2-1/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-1/4

UPC: 783310191599

Item #: 2948

Greenlee

35722 Replacement Replacement Blade, For Use With 35714 6-5/8 in Steel Toothed Recessed Light Hole Saw, Steel

MFR: Greenlee

MFR #: 35722

UPC: 783310357223

Item #: 105426

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 3-5/8" (92.1 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-3-5/8 Variable Pitch Hole Saw, 3-5/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3-5/8

UPC: 783310191728

Item #: 168367

Greenlee

Recessed Light Hole Saw Steel Toothed 4-3/8" (111mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.

35712 Recessed Light Hole Saw, 4-3/8 in Dia, 7/8 in D Cutting, Steel Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 35712

UPC: 783310357124

Item #: 162634

Discontinued

Milwaukee

M18 FUEL Hole Hawg 1/2 in. Right Angle Drill - 6.0 Kit

2807-22 M18 FUEL Hole Hawg Cordless Right Angle Drill Kit, 1/2 in Keyed Chuck, 18 V, 1550 rpm No-Load, 15.6 in OAL, Li-Ion Battery

MFR: Milwaukee Electric Tool

MFR #: 2807-22

UPC: 045242560387

Item #: 1152724

Discontinued

Milwaukee

1680-21 Grounded Electric Drill Kit, 1/2 in Keyed Chuck, 120 VAC, 450 to 1750 rpm Speed, 22 in OAL

MFR: Milwaukee Electric Tool

MFR #: 1680-21

UPC: 045242001989

Item #: 156057

Discontinued

Milwaukee

M18 FUEL Hole Hawg Right Angle Drill w/QUIK-LOK - 6.0 Kit

2808-22 M18 FUEL Hole Hawg Cordless Right Angle Drill Kit, QUIK-LOK Chuck, 18 V, 1550 rpm No-Load, 15.6 in OAL, Li-Ion Battery

MFR: Milwaukee Electric Tool

MFR #: 2808-22

UPC: 045242560400

Item #: 1126598

Discontinued

DOTTIE L H COMPANY

Telescoping Pole Tool, 1/4 in. Size, 4 ft. length

DLM12 Triple Electricians Pole Tool With (3) Interchangeable Head, 4 ft L, Telescopic, Aluminum, Black

MFR: LH Dottie

MFR #: DLM12

UPC: 781002822806

Item #: 30461

Discontinued

Greenlee

Cleans burrs from both sides of the hole in seconds, saving time and labor. Works with any hole size or shape 3/4 IN or larger. Use with existing drills, battery or electric-powered. Ensures safety, less chance of personnel or equipment being cut on sharp edges. Patent pending.

11170 Deburring Tool, 3/8 in Pilot

MFR: Greenlee

MFR #: 11170

UPC: 783310111702

Item #: 121903

Filters