Skip to Main Content Skip to Footer Content

Main Content Starts Here

Hole Saws

Showing 433 - 480 of 519 Items

filter_alt Filters

Sort By

Per Page

Brand

Ways to Shop

Brand

Ways to Shop

Sort By

Per Page

Greenlee

Bit Extension, 12" with 1/4" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.

901-12 Bit Extension With Fixed Pockets, 1/4 in Shank, 12 in L, 9/16 in Dia Body

MFR: Greenlee

MFR #: 901-12

UPC: 783310027065

Item #: 121427

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2-1/2" (63.5 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-2-1/2 Variable Pitch Hole Saw, 2-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-1/2

UPC: 783310191629

Item #: 167028

Greenlee

Bi-Metal Hole Saw Kit for 1/2" - 2" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.

830 Quick Change Hole Saw Kit, For Use With 1/2 to 2 in Conduit, Bi-Metal

MFR: Greenlee

MFR #: 830

UPC: 783310191926

Item #: 187241

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (22.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-7/8 Variable Pitch Hole Saw, 7/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 1/4 in, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-7/8

UPC: 783310191360

Item #: 164494

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2" (50.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-2 Variable Pitch Hole Saw, 2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2

UPC: 783310191551

Item #: 166304

Greenlee

No Image Available

35720G Replacement Blade With Fixed Pockets, For Use With 35712 4-3/8 in Recessed Light Hole Saw, Steel

MFR: Greenlee

MFR #: 35720G

UPC: 783310357209

Item #: 2534

Greenlee

Quickest, most affordable way to cut perfect holes in ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting. Installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes. in very abrasive materialsand still stay sharp. Stabilizer spring balancescutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Fits a 3/8 IN drill chuck and can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris. Quickest, most affordable way to cut perfect holes inceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilotdrill eliminates changeover time. Fits a 3/8 IN drill chuckand can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris.

06923 Adjustable Recessed Quick Change Hole Saw, 2-1/2 to 7 in Dia, Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 6923

UPC: 783310069232

Item #: 154046

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-1/8" (28.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-1-1/8 Variable Pitch Hole Saw, 1-1/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 1/4 in, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-1/8

UPC: 783310191414

Item #: 165064

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-3/4" (44.4 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-1-3/4 Variable Pitch Hole Saw, 1-3/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-3/4

UPC: 783310191520

Item #: 170309

Greenlee

Ultra Cutter Kit. Includes 7/8" - 2-1/2" cutters, two small arbors for extended assembly to 7/8" and 1-1/8" cutters, large arbor, hex wrench and case. For conduit sizes 1/2" - 2". Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

930 Ultra Hole Cutter Kit, 6 Pieces, For Use With 1/2 to 2 in Conduit, HSS

MFR: Greenlee

MFR #: 930

UPC: 783310102144

Item #: 173995

Greenlee

No Image Available

725-1-3/8 Hole Saw, 1-3/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-1-3/8

UPC: 783310100751

Item #: 160651

Greenlee

645-3 Quick Change 3 inch Carbide Tipped Hole Cutter

645-3 Quick Change 3 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-3

UPC: 783310057079

Item #: 107990

Greenlee

Carbide-Tipped Hole Cutter 2-1/2" (63.5mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.

625-2-1/2 Hole Cutter, 2-1/2 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 625-2-1/2

UPC: 783310383369

Item #: 249779

Greenlee

625-1-3/8 1-3/8 inch Carbide Tipped Hole Cutter

625-1-3/8 1-3/8 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-1-3/8

UPC: 783310383314

Item #: 139398

Greenlee

645-2-1/2 Quick Change 2-1/2 inch Carbide Tipped Hole Cutter

645-2-1/2 Quick Change 2-1/2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-2-1/2

UPC: 783310057055

Item #: 145892

Greenlee

No Image Available

825-1-1/4 Variable Pitch Variable Pitch Hole Saw, 1-1/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-1/4

UPC: 783310191445

Item #: 32810

Greenlee

No Image Available

825-3/4 Variable Pitch Hole Saw, 3/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 1/4 in, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3/4

UPC: 783310191346

Item #: 185761

Greenlee

No Image Available

4XT-54 DVersiBIT Bit Extension, 54 in OAL

MFR: Greenlee

MFR #: 4XT-54

UPC: 783310386896

Item #: 196735

Greenlee

No Image Available

725-1-3/4 Hole Saw, 1-3/4 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-1-3/4

UPC: 783310100775

Item #: 161986

Greenlee

No Image Available

825-3-7/8 Variable Pitch Hole Saw With Fixed Pockets, 3-7/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge

MFR: Greenlee

MFR #: 825-3-7/8

UPC: 783310191759

Item #: 532259

Greenlee

No Image Available

904H-12 Bit Extension, Hex Drive, 12 in OAL

MFR: Greenlee

MFR #: 904H-12

UPC: 783310349808

Item #: 177658

Greenlee

No Image Available

891 Electricians/Plumbers Hole Saw Kit, 12 Pieces, For Use With 3/4 to 2-1/2 in Conduit, Bi-Metal

MFR: Greenlee

MFR #: 891

UPC: 783310034803

Item #: 140468

Greenlee

1 1/2" VARIABLE PITCH HOLESAW

825-1-1/2 Variable Pitch Hole Saw, 1-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-1/2

UPC: 783310191483

Item #: 165689

Greenlee

No Image Available

725-7/8 Hole Saw, 7/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-7/8

UPC: 783310100720

Item #: 117287

Greenlee

No Image Available

825-2-1/8 Variable Pitch Variable Pitch Hole Saw, 2-1/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-1/8

UPC: 783310191582

Item #: 51338

Greenlee

No Image Available

825-4 Variable Pitch Hole Saw, 4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4

UPC: 783310191766

Item #: 12306

Greenlee

No Image Available

725-4-1/8 Hole Saw, 4-1/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-4-1/8

UPC: 783310106876

Item #: 103973

Greenlee

No Image Available

902-24 DVersiBIT Power Bit Extension, Hex Drive, 24 in OAL

MFR: Greenlee

MFR #: 902-24

UPC: 783310027089

Item #: 122826

Greenlee

No Image Available

825B-1-1/8 Variable Pitch Hole Saw With Fixed Pockets, 1-1/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 1/4 in, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825B-1-1/8

UPC: 783310298311

Item #: 776220

Greenlee

No Image Available

825-1-5/16 Variable Pitch Hole Saw With Fixed Pockets, 1-5/16 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-5/16

UPC: 783310191452

Item #: 98490

Greenlee

No Image Available

825-3-1/4 Variable Pitch Hole Saw With Fixed Pockets, 3-1/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3-1/4

UPC: 783310191698

Item #: 188880

Greenlee

No Image Available

825-1-5/8 Variable Pitch Variable Pitch Hole Saw, 1-5/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-5/8

UPC: 783310191506

Item #: 102508

Greenlee

No Image Available

904H-24 Power Bit Extension, Hex Drive, 24 in OAL

MFR: Greenlee

MFR #: 904H-24

UPC: 783310353584

Item #: 186823

Greenlee

No Image Available

725-2-1/2 Hole Saw, 2-1/2 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-2-1/2

UPC: 783310100805

Item #: 267095

Greenlee

No Image Available

725-4-1/2 Hole Saw, 4-1/2 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-4-1/2

UPC: 783310018797

Item #: 342120

Greenlee

No Image Available

825-4-1/2 Variable Pitch Hole Saw, 4-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4-1/2

UPC: 783310191803

Item #: 169650

Greenlee

No Image Available

825-5 Variable Pitch Hole Saw With Fixed Pockets, 5 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-5

UPC: 783310191827

Item #: 200341

Greenlee

No Image Available

825-4-1/4 Variable Pitch Hole Saw, 4-1/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4-1/4

UPC: 783310191780

Item #: 181814

Greenlee

No Image Available

825-3-3/4 Variable Pitch Hole Saw, 3-3/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3-3/4

UPC: 783310191742

Item #: 79517

Greenlee

No Image Available

825-4-3/4 Variable Pitch Hole Saw, 4-3/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4-3/4

UPC: 783310191810

Item #: 202241

Greenlee

3" Carbide-Tipped Hole Cutter. Switch quickly between cutting head sizes without re-chucking with a simple push and turn connection. Split-Point Cobalt Steel Pilot Drill with step design for fast, accurate cutting with less force. Tungsten Carbide Teeth optimized design for fast, easy cutting and maximum life in stainless steel, no oil required. Flange Stop eliminates over-drilling. Slug Ejector Spring quick, easy slug removal. Cuts round, burr-free holes

625-3 1-Piece Hole Cutter, 3 in Dia Cutter, 8 ga D Cutting, Carbide

MFR: Greenlee

MFR #: 625-3

UPC: 783310087748

Item #: 1012163

Greenlee

No Image Available

725-1-1/8 Hole Saw, 1-1/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-1-1/8

UPC: 783310100737

Item #: 159431

Greenlee

No Image Available

825-6 Variable Pitch Hole Saw, 6 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-6

UPC: 783310191841

Item #: 897605

Greenlee

No Image Available

825-4-3/8 Variable Pitch Variable Pitch Hole Saw, 4-3/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4-3/8

UPC: 783310191797

Item #: 52012

Greenlee

No Image Available

825-5/8 Variable Pitch Variable Pitch Hole Saw, 5/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge

MFR: Greenlee

MFR #: 825-5/8

UPC: 783310191322

Item #: 140971

Greenlee

No Image Available

825-2-5/8 Variable Pitch Variable Pitch Hole Saw, 2-5/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-5/8

UPC: 783310191643

Item #: 169238

Greenlee

2" CARBIDE GRIT HOLESAW

725-2 Hole Saw, 2 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-2

UPC: 783310100782

Item #: 163944

Greenlee

No Image Available

825-5-1/2 Variable Pitch Hole Saw, 5-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-5-1/2

UPC: 783310191834

Item #: 223293