Electrical Relays and Accessories | Crescent Electric Supply Company

Siemens

DC SOLENOID SYSTEM DC 24V DC OPERATION 6NO+2NC, SCREW TERMINALS CONTACTOR RELAY62E EN 50 011

3TH4262-0BB4 Sirius Contactor Relay, 6NO-2NC 6 Form A/2 Form B Contact, 24 VDC V Coil

MFR: Siemens

MFR #: 3TH4262-0BB4

UPC: 754554245638

Item #: 821364

Siemens

Contactor relay, 2NO+2NC, AC 220v 50HZ, 240v 60HZ, size s00, screw terminal

3RH21221AP60 Contactor Relay, 2NO-2NC 2 Form C Contact, 220 V AC V Coil

MFR: Siemens

MFR #: 3RH21221AP60

UPC: 662643903386

Item #: 1173227

Siemens

Plug-in Relay, Premium LED, Mechanical Flag 11-pin Octal Base 3PDT, 10A, 120VACUses Socket 3TX7144-1E3 or 3TX7144-4E3

3TX7112-1NF13 Sirius Premium Socket Relay, 11 Pins, 3 Form C 3PDT Contact Form, 120 VAC Coil

MFR: Siemens

MFR #: 3TX7112-1NF13

UPC: 754554759784

Item #: 447705

Siemens

Timing Relay,Timer,SIMIREL Conversion type = Analog Function = 8 Function Time Range = 0.05s-100h,1CO Cntrl Voltage=24VUC/100-127VAC Screw DIN Mounting, Width = 45mm

3RP2005-1AQ30 Sirius Timing Relay With LED, 0.05 s to 100 hr Setting, 127 V AC/24 V DC, 1CO 1 Form C Contact

MFR: Siemens

MFR #: 3RP2005-1AQ30

UPC: 754554842691

Item #: 242318

Siemens

Plug-in Relay, Premium LED, Mechanical Flag 5-pin Square Base SPDT, 15A, 120VACUses Socket 3TX7144-4E7

3TX7110-5JF13 Sirius Miniature Premium Socket Relay, 5 Pin, 1 Form C SPDT Contact, 120 VAC V Coil

MFR: Siemens

MFR #: 3TX7110-5JF13

UPC: 754554759845

Item #: 805880

Littelfuse

The KRDB Series is a compact time delay relay measuring only 2 in. (50.8 mm) square. Its microcontroller timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRDB Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output relay energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.

KRDB115M Fixed Time Delay Relay, 5 min Setting, 12 V DC, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: KRDB115M

UPC: 079458994513

Item #: 1305639

Littelfuse

The 233P is a single-phase pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle, overvoltage and undervoltage conditions. The 233P protects 230 volt, 2 or 3 wire, 1/3 to 3hp pumps. A calibration adjustment allows the 233P to be calibrated to your specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A proprietary microcontroller based voltage, power factor and current-sensing circuit constantly monitors for power fluctuations, overcurrent and underload conditions. When an abnormality, such as loss of suction, is detected, the 233P deactivates its output relay and directly disconnects the pump motor. The relay then begins its user-selectable Restart Delay (dry-well recovery) timer. When the timer expires or power is removed and reapplied, the relay reactivates its output relay and allows the pump to turn back on. An infrared LED communicates directly with a hand-held diagnostic tool called the Informer (sold separately).

233P-1.5-ENCL Symcom PumpSaver 1-Phase Pump Protection Relay, 230 V AC, 1NO 1 Form A SPST Contact

MFR: Littelfuse

MFR #: 233P-1.5-ENCL

UPC: 079458990348

Item #: 1029249

Littelfuse

The TSD2 Series is designed for more demanding commercial and industrial applications where small size and accurate performance are required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.1% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 100 hours are available. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry. Operation (Interval): Upon application of input voltage, the time delay begins. The output is energized during the time delay. At the end of the time delay, the output de-energizes and remains de-energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.

TDS120AL Digital Integrated Circuitry Timing Relay, 1 to 1023 s Setting, 120 V AC, 8 Pin, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: TDS120AL

UPC: 079458999891

Item #: 1340233

Littelfuse

The 460 is a 3-phase voltage monitor that protects 190-480VAC or 475-600V, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically senses line voltage. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions such as low, high, and unbalanced voltage, loss of any phase, and phase reversal. When a harmful condition is detected, the 460 output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for a specified amount of time (restart delay). The trip and restart delays prevent nuisance tripping due to rapidly fluctuating power line conditions. All 460 models feature adjustable 1-30 second trip delay, 1-500 second restart delay, 2-8% voltage unbalance trip point, and one form C contact except where noted.

460-VBM Symcom MotorSaver 3-Phase Voltage Monitoring Relay, 190 to 480 V AC, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 460-VBM

UPC: 079458990645

Item #: 1012979

Littelfuse

The TDB Series combines accurate digital circuitry with isolated, 10A, DPDT or SPDT contacts in an 8 or 11-pin plug-in package. The TDB Series features DIP switch selectable time delays ranging from 0.1-10,230 seconds in three ranges. The TDB Series is the product of choice for custom control panel and OEM designers. Operation (Delay-on-Break): Input voltage must be applied to the input before and during timing. Upon closure of the initiate switch, the output relay is energized. The time delay begins when the initiate switch is opened (trailing edge triggered). The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.

TDB120ALD Time Delay Relay, 1 to 1023 s Setting, 120 V AC, 11 Pin, 2 Form C DPDT Contact

MFR: Littelfuse

MFR #: TDB120ALD

UPC: 079458999471

Item #: 858653

Littelfuse

SE-CS30-26 Ground Fault Current Transformer, 26 mm, 600:1, 600 V AC Insulation Level, 3% at 0.06 VA Accuracy, 50 to 400 Hz, -67 to 140 deg F Temperature, Screw Mount

MFR: Littelfuse

MFR #: SE-CS30-26

UPC: 079458989205

Item #: 1390088

Littelfuse

The LSR-0 is a self-powered load sensor intended for use as a proof relay. It is used to verify that current is flowing as intended. It has a guaranteed 15A pull-in current and 2.5A drop-out current. Proof relays are typically used to interlock fans, compressors, motors, heating elements and other devices. The LSR-0 is self-powered, that is, it draws its power from the wire being monitored so it does not require separate control power wiring.

LSR-0 Symcom Load Sensor Relay, 15 to 135 A

MFR: Littelfuse

MFR #: LSR-0

UPC: 079458996654

Item #: 891266

Littelfuse

The 777/ 77C is a fully programmable electronic overload relay designed to protect any motor drawing 2-800 full load amps (external CTs are required above 90 amps). The 777-HVR-SP and 77C (family of products) are for single-phase 100-240VAC applications. Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. All of the overload relays provide unsurpassed protection by combining overload, underload, and voltage in one package. For standalone applications, the units incorporate a 3-digit LED display that is used for programming, providing real-time operational information and displaying diagnostic codes to aid in troubleshooting a fault condition. The units also feature a communications port that can be used with communication modules listed in the 777 accessories section to form a Modbus, DeviceNet, Profibus, or Ethernet network. Up to 99 units can be remotely monitored and controlled from a PC, PLC, or SCADA system, and data logging through a PC with the optional Solutions software. This capability allows for a simple, cost-effective way to meet new requirements for arc-flash safety.

77C 1-Phase Overload Relay, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 77C

UPC: 079458991192

Item #: 1261620

Littelfuse

INFORMER Remote Indication and Monitoring, 1 V AC 0.25 W, Infrared Signal, For Use With 1-ph PumpSaver, 94 HB ABS, Black

MFR: Littelfuse

MFR #: INFORMER

UPC: 079458994216

Item #: 1029250

Littelfuse

The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LEDs indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket. Operation: Alternating: When the rotary switch is in the alternate position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position A to lock Load A or position B to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate. Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the units input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation. Duplexing (Cross Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously. The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated.

ARP43S Alternating Relay With Rotary Switch, 8 Pin, 2 Form C DPDT Contact, 120 VAC V Coil

MFR: Littelfuse

MFR #: ARP43S

UPC: 079458991475

Item #: 729753

Littelfuse

The ISS-102 is a two-channel, intrinsically-safe switch designed for multiple uses including a pump-up/pump-down (latching) controller or two-channel switch. Two LEDs indicate the state of the intrinsically-safe inputs and output relays and user-selectable options are available including a variable resistance threshold for float inputs. The ISS-102 enclosure is surface or DIN rail mountable. -LC Each input channel is active when the corresponding switch is closed. When the lag input (CH2) is activated, the output closes. Applying latching logic, the output contact remains closed until the lead (CH1) and the lag (CH2) inputs are deactivated. Sensitivity is fixed at 100kOhms with a debounce time delay of 2 seconds. -DCS This dual-channel switch has a debounce delay feature of 0.5 seconds. Resistance probes or switches can be used on its inputs. Two LEDs illuminate the output state of either form A relay. Sensitivity is fixed at 100kOhms with a debounce time delay of 0.5 seconds. -MC By selecting the proper functionality through the dip switches, you can define a pump-up or pump-down, single or dual channel non-latching switch. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays (one form A & one form C) will change state, with a debounce time delay of 0.5 or 2 seconds.

ISS-102ACI-MC Symcom 2-Channel Multi-Function Intrinsically Safe Switch, 1 Form A/1 Form C Contact

MFR: Littelfuse

MFR #: ISS-102ACI-MC

UPC: 079458994278

Item #: 1371367

Littelfuse

ER-5KV Continuous-Duty Sensing Resistor, 2500 V AC, 125 mA, 20 kOhm, For Use With SE-330/SE-335 High Voltage Neutral Grounding Resistor and SE-330AU Neutral Earthing Resistor, Motor Protection Relay

MFR: Littelfuse

MFR #: ER-5KV

UPC: 079458977936

Item #: 1311635

Littelfuse

The FS300 Series of solid-state flashers were specifically designed to operate lamp loads. Their two-terminal series connection feature makes installation easy. The high immunity to line noise and transients makes the FS300 Series ideal for moving vehicle applications. All solid-state construction means reliability and long life. The FS300 Series offers a factory fixed flash rate of 75 FPM or may be ordered with a fixed, custom flash rate ranging from 60 to 150 FPM. Operation: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.

FS312 FS300 Solid State Flasher, 2.5 A, 12 V DC V Coil

MFR: Littelfuse

MFR #: FS312

UPC: 079458993547

Item #: 789423

Littelfuse

The PCR Series of photo control is a combination of precision electronic circuitry, electromechanical output, and unique molded plastic housing. Designed and built to meet the demands of the most rigorous requirement of tower and obstruction lighting control, each unit is factory calibrated to meet FAA and FCC specifications. Electronic circuit, output contactor, and terminal block are all contained within front plastic housing. Edge support molded into the bottom edge of housing allows easy wiring of new and existing installations. Available with or without cast aluminum junction box. Operation: When the amount of light sensed falls below the actuation level for energization, the output relay energizes. Conversely, when the amount rises above the actuation level for de-energization, the output relay de-energizes.

PCR11 Photo Electric Control With Aluminum Box, 120 V AC, Surface Mount, ABS

MFR: Littelfuse

MFR #: PCR11

UPC: 079458997750

Item #: 1366356

Littelfuse

The 460-100-SP is used on 95-120VAC, 50*/60Hz single-phase motors and the 190-240VAC, 50*/60Hz single-phase motors to protect them from damaging high and low voltage conditions. An adjustment knob allows the user to set a 1-500 second restart delay. The variable restart delay is also a power-up delay and can be utilized to stagger-start motors on the same system. A unique microcontroller-based, voltage-sensing circuit constantly monitors the voltage to detect harmful power line conditions. When a harmful condition is detected, the relays output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level and a specified amount of time has elapsed (restart delay). The trip delay prevents nuisance tripping due to rapidly fluctuating power line conditions.

460-200-SP MotorSaver 1-Phase Voltage Monitoring Relay, 190 to 240 V AC, 1 Form C SPDT Contact

MFR: Littelfuse

MFR #: 460-200-SP

UPC: 079458990553

Item #: 878263

Littelfuse

TSD24145S Fixed Time Delay Relay, 45 s Setting, 120 V AC, 1NO 1 Form A SPST Contact

MFR: Littelfuse

MFR #: TSD24145S

UPC: 079458020526

Item #: 866239

Littelfuse

460-L Symcom Phase Monitoring Relay, 190 to 480 V AC, 1 Form C Contact

MFR: Littelfuse

MFR #: 460-L

UPC: 079458990607

Item #: 1148856

Littelfuse

3Ph Vm/380-480V/Adj.Vub,Td,Rd/2X480V Rly

MFR: Littelfuse

MFR #: 355-400-5

UPC: 079458989915

Item #: 876387

Littelfuse

1-Phase Pumpsaverplus / 230V

MFR: Littelfuse

MFR #: 233P-ENCL

UPC: 079458990355

Item #: 770036

Littelfuse

1-Ch Intrinsically-Safe Switch

MFR: Littelfuse

MFR #: ISS-100

UPC: 079458994247

Item #: 943567

Littelfuse

Cross-Wired Alternating Relay 95-125V

MFR: Littelfuse

MFR #: ALT-115-X-SW

UPC: 079458991338

Item #: 1172127

Siemens

TIME RELAY, ELECTRONIC, DELAYED, 2 CO CONT., 15 TIME SET. RANGES, 0.05S...100HR, 12...240V AC/DC AT AC 50/60HZ, SCREW TERMINAL

3RP25251BW30 Sirius Electronic Timing Relay, 0.05 s to 100 hr Setting, 2CO 2 Form C Contact

MFR: Siemens

MFR #: 3RP25251BW30

UPC: 887621914981

Item #: 844371

Siemens

Overload relay 12.5...50 a for motor protection size s2, class 10e for mountingonto contactors main circuit screw terminal aux. circuit screw terminal manual-automatic-reset

3RB30361UB0 Sirius Solid-State Overload Relay, 1NO-1NC 1 Form A/1 Form B Contact

MFR: Siemens

MFR #: 3RB30361UB0

UPC: 887621914547

Item #: 1222802

Siemens

Overload relay 11...16 a for motor protection sz s0, class 10, f. mounting ontocontactor main circuit screw terminal aux. circuit screw terminal manual-automatic-reset

3RU21264AB0 Sirius Thermal Overload Relay, 1NO-1NC 1 Form A/1 Form B Contact

MFR: Siemens

MFR #: 3RU21264AB0

UPC: 662643919196

Item #: 852014

Siemens

Esp200 catalog no 48atc3s00 solid state overload relay for motor protection 3 to 12 amp size a1, 3 phase class 5...30, switchable direct mounting and stand-alone main circuit windows auxiliary circuit scrw terminal manual automatic reset

3UB81234CW2 ESP200 3-Phase Solid State Overload Relay, 30 to 12 A, 1NO-1NC 1 Form A/1 Form B Contact

MFR: Siemens

MFR #: 3UB81234CW2

UPC: 662643897203

Item #: 98057

Siemens

Esp200 catalog no 48bth3s00 solid state overload relay for motor protection 50 to 200amp, size b, 3 phase class 5...30, switchable direct mounting and stand-alone main circuit windows auxiliary circuit scrw terminal manual automatic reset

3UB81334HW2 ESP200 3-Phase Solid State Overload Relay, 50 to 200 A, 1NO-1NC 1 Form A/1 Form B Contact

MFR: Siemens

MFR #: 3UB81334HW2

UPC: 662643854916

Item #: 20735

Siemens

Esp200 catalog no 48atd3s00 solid state overload relay for motor protection 5.5to 22 a size a1, 3 phase class 5...30, switchable direct mounting and stand-alone main circuit windows auxiliary circuit scrw terminal manual automatic reset

3UB81234DW2 ESP200 3-Phase Solid State Overload Relay, 5.5 to 22 A, 1NO-1NC 1 Form A/1 Form B Contact

MFR: Siemens

MFR #: 3UB81234DW2

UPC: 662643897210

Item #: 6769

Siemens

Overload relay 14...20 a for motor protection sz s0, class 10, f. mounting ontocontactor main circuit screw terminal aux. circuit screw terminal manual-automatic-reset

3RU21264BB0 Sirius Thermal Overload Relay, 1NO-1NC 1 Form A/1 Form B Contact

MFR: Siemens

MFR #: 3RU21264BB0

UPC: 662643919226

Item #: 978368

Siemens

Esp200 catalog no 48btg3s00 solid state overload relay for motor protection 25 to 100 amp size b 3 phase class 5...30, switchable direct mounting and stand-alone main circuit windows auxiliary circuit scrw terminal manual automatic reset

3UB81334GW2 ESP200 3-Phase Solid State Overload Relay, 25 to 100 A, 1NO-1NC 1 Form A/1 Form B Contact

MFR: Siemens

MFR #: 3UB81334GW2

UPC: 662643854923

Item #: 173982

Siemens

Monitoring relay attachable to contactor 3rt2. size s00 basic, analog adjustable apparent current monitoring 1.6 - 16a, 50-60 HZ, 2-phase supply 24 V AC/DC 1 co contact monitoring for current overshoot/undershoot phase failure, wire break with or w/o error log on-delay 0-60 s spurious peak suppr.0-30 s switching hysteresis 6% screw connection

3RR21411AA30 2-Phase Current Monitoring Relay With Analog Setting, 24 V AC/DC, 1.6 to 16 A, 1CO Contact

MFR: Siemens

MFR #: 3RR21411AA30

UPC: 662643853704

Item #: 817883

Littelfuse

Term Assy Small Format Wl

MFR: Littelfuse

MFR #: SE-TA6ASF-WL

UPC: 079458989564

Item #: 665877

Siemens

Overload relay 2.8...4.0 a for motor protection sz s0, class 10, f. mounting onto contactor main circuit screw terminal aux. circuit screw terminal manual-automatic-reset

3RU21261EB0 Sirius Solid-State Overload Relay, 2.8 to 4 A, 1NO-1NC 1 Form A/1 Form B Contact

MFR: Siemens

MFR #: 3RU21261EB0

UPC: 662643919011

Item #: 893610

EasyHeat

RK-2 Warm Tiles Thermostat Relay Kit, 240 V AC, For Use With Electric Floor Warming System

MFR: EasyHeat

MFR #: RK-2

UPC: 013627012998

Item #: 186993

Siemens

Digital monitoring relay voltage monitoring, 22.5 mm from 17 to 275 V AC/DC over- and undershoot internal power supply DC and AC 50 to 60 HZ spurious peak lag 0.1 to 20 s hysteresis 0.1 to 150 v 1 changeover contact with or without error memory screw terminal replacement product for 3ug3534, 3ug3535

3UG4633-1AL30 Monitoring Relay, 17 to 275 V AC/DC, 1CO Contact

MFR: Siemens

MFR #: 3UG4633-1AL30

UPC: 754554931487

Item #: 1254532

Siemens

ASM_MONITOR 3UG4614-1BR20-Monitoring_Relays_Screw_Terminal

3UG4614-1BR20 Digital Phase Sequence Monitoring Relay, 160 to 690 V AC, 3 Pin, DPDT Contact

MFR: Siemens

MFR #: 3UG4614-1BR20

UPC: 754554929088

Item #: 1261788

Siemens

Plug-in Relay, Premium LED, Mechanical Flag 8-pin Square Base DPDT, 15A, 24VDC Uses Socket 3TX7144-1E6 or 3TX7144-4E6

3TX7114-5LC03 Sirius Miniature Premium Socket Relay, 8 Pins, 2 Form C DPDT Contact Form, 24 VDC Coil

MFR: Siemens

MFR #: 3TX7114-5LC03

UPC: 754554760162

Item #: 448114

Siemens

Plug-in Relay, Premium LED, Mechanical Flag 8-pin Square Base DPDT, 15A, 120VACUses Socket 3TX7144-1E6 or 3TX7144-4E6

3TX7114-5LF13 Sirius Miniature Premium Socket Relay, 8 Pins, 2 Form C DPDT Contact Form, 120 VAC Coil

MFR: Siemens

MFR #: 3TX7114-5LF13

UPC: 754554760117

Item #: 487380

Siemens

Enclosed Power Relay Heavy Duty DPST-NO, 30A, 24VAC DIN Rail or Panel Mount

3TX7131-4CC13 Enclosed Power Relay, 1 NO 1 Form A DPST Contact, 24 VAC V Coil

MFR: Siemens

MFR #: 3TX7131-4CC13

UPC: 754554768410

Item #: 250777

Siemens

3TX7144-1E5 Sirius Plug-In Relay Socket, For Use With 3TX71 Series Plug-In Relay, 14 Pin

MFR: Siemens

MFR #: 3TX7144-1E5

UPC: 754554761961

Item #: 142898

Siemens

3TX71441E6 Sirius Relay Socket, For Use With 3TX71 Series Plug-In Relay, 8 Pin

MFR: Siemens

MFR #: 3TX71441E6

UPC: 754554761978

Item #: 1219687

SCHNEIDER ELECTRIC

Overload relay, TeSys LRD, motor protection, 0.1A to 0.5A, 3 phase, electronic thermal

LR9D01 TeSys Electronic Thermal Overload Relay With Relay Trip Indicator, 0.1 to 0.5 A, 600 V AC V Coil

MFR: Schneider Electric

MFR #: LR9D01

Item #: 401511

Discontinued

Square D

9050JCK2F15V20 Type JCK Timer Relay, 15 s Setting, 240 V AC, 11 Pin, 2NO-2NC 2 Form C DPDT Contact

MFR: Schneider Electric

MFR #: 9050JCK2F15V20

UPC: 785901321026

Item #: 103339

Discontinued

Square D

8501RS14V36 Type R Low Voltage Miniature Plug-In Relay, 5 A, 4CO 4 Form C 4PDT Contact, 300 V AC/30 V DC V Coil

MFR: Schneider Electric

MFR #: 8501RS14V36

UPC: 785901559276

Item #: 89375

Filters