Power Tool Attachments | Crescent Electric Supply Company

Greenlee

1/4-20 Split-point tip resists walking and penetrates material faster. Strong, high-speed steel provides superior resistance to heat and abrasion. Titanium Nitride coating ensures that the bits run cooler, drill faster, and last longer. Optimized core for significantly reduced torque on the user and extended tool life. Designed to drill in up to 1/4" thick material. Durable case and quick-change adapter included

DTAPSS1/4-20 Split-Point Tip Drill/Tap Bit, 1/4-20 Thread

MFR: Greenlee

MFR #: DTAPSS1/4-20

UPC: 783310025740

Item #: 1176372

Greenlee

Seven of the most common E-Z BORE bits from 1" to 2-9/16". Also includes 5-1/2" bit extension, replacement screw points, hex wrench and set screws. Double-blade design for fast, smooth cuts. Dual cutting edges can be re-sharpened for longer bit life. Large, open design won't clog with wood chips. Self-feed tip pulls bit through wood. Outer spur teeth reduce splintering and blowouts. Replaceable tip.

149H2KIT E-Z Bore Quick-Change Self-Feeding Wood Boring Bit Kit With Fixed Pockets, 1 in Min Drill Bit, 2-9/16 in Max Drill Bit, 7 Pieces

MFR: Greenlee

MFR #: 149H2KIT

UPC: 783310012733

Item #: 151230

Greenlee

Stubby Auger Wood Bit, 7/8" (22.2 mm). Over center single flute design for cleaner holes and less splintering. Unique cutting edge designfor fast and smooth cutting action. Shorter than the top competitor's bit for better access to tight spaces between studs and joists. Perfect for drilling 2" and 4" joists. Augers have self-feeding screw point that draws bit through all wood types with less operator fatigue. Eliminates the need for special tools such as expensive right angle drills or multiple steps to cut the hole to size. 1/4" hex quick change design for fast and easy use in all drill types. Clearly marked with bit diameter and catalog number on shank for easy identification.

60A-7/8 Quick-Change Auger Wood Drill Bit, 7/8 in Dia, 4-1/2 in OAL, Spiral Flute, 1/4 in Shank

MFR: Greenlee

MFR #: 60A-7/8

UPC: 783310124184

Item #: 182659

Greenlee

Quick Change D'VersiBIT Extension System Kit. 2.25' x 5" x 21.5" (57.1mm x 127mm x 539.7mm). All the same great features as a traditional flexible drill bit , but with even more flexibility and versatility. For use when drilling between studs and joists. Can use with any type of bit with a 1/4" quick change hex on it, such as spade bits, auger bits or drill bits for increased application flexibility. Replace only the bit as it wars rather than the entire bit and shaft for lower overall cost of ownership. Quickly and easily switch from drilling to pulling with the quick change pulling grip.

921-18 DVersiBIT Quick-Change Bit Extension, 18 in OAL

MFR: Greenlee

MFR #: 921-18

UPC: 783310124139

Item #: 150886

Greenlee

DTAPM10C Quick-Change Standard Length Combination Drill and Tap, 1 in L Drill, M10x1.5 Thread

MFR: Greenlee

MFR #: DTAPM10C

UPC: 783310121657

Item #: 1237131

Greenlee

Quick Draw Driver. Draw studs, adapter, spacer and case. Compact, lightweight design for portability and fast, easy one-person operation. Develops 8 tons of hydraulic force for easy punching, even in 10-gauge stainless steel, depending on individual punch capacities. Right angle driver head rotates over 180 for maximum flexibility in tight working areas. Can be used with non-round punches within the capacity of the tool (adapter may be required). U.S. Patent #6,772,521.

7804-E Hydraulic Driver Set, 10 ga Stainless Steel Punch Capacity, 8 ton Max Operating Force

MFR: Greenlee

MFR #: 7804-E

UPC: 783310342915

Item #: 288253

Greenlee

Quick Draw 90 Driver Metric. Draw studs, adapter, spacer and case. Compact, lightweight design for portability and fast, easy one-person operation. Develops 8 tons of hydraulic force for easy punching, even in 10-gauge stainless steel, depending on individual punch capacities. Right angle driver head rotates over 180 for maximum flexibility in tight working areas. Can be used with non-round punches within the capacity of the tool (adapter may be required). U.S. Patent #6,772,521.

7904-E Hydraulic Right Angle Metric Knockout Driver Kit, 10 ga Stainless Steel Punch Capacity, 8 ton Max Operating Force

MFR: Greenlee

MFR #: 7904-E

UPC: 783310342991

Item #: 236913

Greenlee

D'Versibit Type A Auger Bit. 1/2" (12.7 mm) bit diameter, 54" (1371.6 mm) long with a 3/16" (4.8 mm) shaft diameter. Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval.

08-03-54A DVersiBIT Type A Auger Bit, 1/2 in Dia, 3/16 in Dia x 54 in L Shank, Screw Point, Uncoated

MFR: Greenlee

MFR #: 08-03-54A

UPC: 783310380733

Item #: 154900

Greenlee

09-03-72B DVersiBIT Type B Combination Auger Bit, 9/16 in Dia, 3/16 in Dia x 72 in L Shank, Screw Point, Uncoated

MFR: Greenlee

MFR #: 09-03-72B

UPC: 783310381044

Item #: 120011

Greenlee

D'Versibit Type A Auger Bit. 3/4" (19.1 mm) bit diameter, 72" (1828.8 mm) long with a 1/4" (6.4 mm) shaft diameter. Wood-type auger bit with screw point. Pulls itself through wood, avoids walking or skidding. Excellent for drilling in soft woods or through thin sections. Slow back-taper allows for easy retrieval.

12-04-72A DVersiBIT Type A Auger Bit, 3/4 in Dia, 1/4 in Dia x 72 in L Shank, Screw Point, Uncoated

MFR: Greenlee

MFR #: 12-04-72A

UPC: 783310380849

Item #: 161312

Greenlee

Nail Eater Extreme Impact Bit 9/16" (14.3 mm) x 18". Quickly bore through creosoted and salt-treated utility poles. Resists wear, eats through nails and staples. Self-feeding screw point draws the bit through the wood. 7/16 IN hex shank to fit impact drivers.

37868 Extreme Impact Drill Bit, 5/8 in Dia, 18 in OAL, 12.9 in L Hollow Center Flute, 7/16 in Shank

MFR: Greenlee

MFR #: 37868

UPC: 783310378686

Item #: 961458

Greenlee

Slug-Splitter SC Knockout Punch Kit for 1/2" - 2" Conduit Size. Capacities up through 10 gauge (3.5mm) stainless steel. Self centering punch aligns itself on pilot hole. Includes punches, dies and draw stud in metal case. Driver not included.

7307 Slug-Splitter SC Hydraulic Kit Knockout Punch Kit, For Conduit/Pipe Dia: 1/2 to 2 in, 10 ga THK Max Stainless Steel

MFR: Greenlee

MFR #: 7307

UPC: 783310295280

Item #: 22975

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 3". Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-3 Variable Pitch Hole Saw, 3 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3

UPC: 783310191674

Item #: 167653

Greenlee

KD12AL U Style Crimping Die Kit, 16 Pieces, Aluminum

MFR: Greenlee

MFR #: KD12AL

UPC: 783310102618

Item #: 314931

Greenlee

CrImping Die 12 Ton U-Style Die Burndy equivalent U-238. Dies are use with service entrance connectors, C-Taps, H-Taps, overhead and underground connectors.

KD12-35 U Style Crimping Die, 10 AWG

MFR: Greenlee

MFR #: KD12-35

UPC: 783310102052

Item #: 1085131

Greenlee

KA22-4/0 22 Series Hex Crimping Die, 4/0 AWG, Aluminum

MFR: Greenlee

MFR #: KA22-4/0

UPC: 783310067535

Item #: 44096

Greenlee

725-3-5/8 Hole Saw, 3-5/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-3-5/8

UPC: 783310100812

Item #: 188118

Greenlee

Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 24 FT collapses to 50 IN x 2 1/4 IN and uses snap-lock buttons to maintain extended reach capabilities. Install suspension wires for drop ceilings.

FP24 Non-Conductive Fish Pole, 2-1/4 in Dia x 50 in L, Fiberglass, Green

MFR: Greenlee

MFR #: FP24

UPC: 783310104438

Item #: 140372

Greenlee

FP18 Non-Conductive Fish Pole, 2 in Dia x 27 in L, Fiberglass, Green

MFR: Greenlee

MFR #: FP18

UPC: 783310104421

Item #: 49991

Greenlee

33A-1-1/4 Standard Spade Bit, 1-1/4 in Dia, 6-1/4 in OAL, 1/4 in Shank

MFR: Greenlee

MFR #: 33A-1-1/4

UPC: 783310203599

Item #: 137393

Greenlee

Spade Bit 1-1/2" Hole Diameter. 6-1/4" long with 1/4" hex shank. Bore hardwood, softwood, plywood and drywall. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling.

33A-1-1/2 Standard Spade Bit, 1-1/2 in Dia, 6-1/4 in OAL, 1/4 in Shank

MFR: Greenlee

MFR #: 33A-1-1/2

UPC: 783310203612

Item #: 138735

Greenlee

Kwik Cycle Die Set (1,14mm-6mm). 26-10 AWG. For non-insulated and insulated wire ferrules

03283 Kwik Cycle Interchangeable Crimping Tool Die Set

MFR: Greenlee

MFR #: 3283

UPC: 783310032830

Item #: 47194

Greenlee

Works with any crimping tool that accepts 12-ton "U" type dies. Less costly than dedicated cutting tools. Simple to install in crimping tools. Requires no adjustments for cutting different materials. Will cleanly cut guy wire (including EHS), grade 60 rebar, ground rod, soft steel bolts up to 5/8 (16 mm) and up to477 kcmil (MCM)(240 mm2) ACSR. U.S. Patent Number 5,775,158

00949 U-Style Guy Wire Cutting Die, 477 kcmil ACSR

MFR: Greenlee

MFR #: 949

UPC: 783310009498

Item #: 1224563

Greenlee

WB.1471 Die Crimping Tool, Copper

MFR: Greenlee

MFR #: WB.1471

UPC: 783310029120

Item #: 200686

Greenlee

4 AWG Copper Die for crimping color-coded aluminum lugs and splices. Requires UA22 adapter when used with ECCXL, HCCX, & RCCX tools.

KC22-4 22 Series Crimping Die, 4 AWG, Copper

MFR: Greenlee

MFR #: KC22-4

UPC: 783310030812

Item #: 596708

Greenlee

Bit Extension, 18" with 5/16" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.

902-18 Power Bit Extension With Fixed Pockets, 5/16 in Shank, 18 in L, 21/32 in Dia Body

MFR: Greenlee

MFR #: 902-18

UPC: 783310027072

Item #: 122129

Greenlee

E-Z Bore Self-Feed Bit 1-1/8" (28.6 mm). Double-blade design for fast, smooth cuts. Dual cutting edges can be re-sharpened for longer bit life. Large, open design won't clog with wood chips. Self-feed tip pulls bit through wood. Outer spur teeth reduce splintering and blowouts. Replaceable tip.

149H2-1-1/8 E-Z Bore Self-Feed Wood Boring Bit, 1-1/8 in Dia, 5 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 149H2-1-1/8

UPC: 783310012504

Item #: 207840

Greenlee

HB.10018 Housing Unit, For Use With EK12IDL, EK1230L and EK1230CL Battery Powered Pistol Grip Tool

MFR: Greenlee

MFR #: HB.10018

UPC: 783310101130

Item #: 117634

Greenlee

835 Hole Saw Kit, 13 Pieces, For Use With 1/2 to 4 in Conduit, Bi-Metal

MFR: Greenlee

MFR #: 835

UPC: 783310275381

Item #: 110816

Greenlee

35723 Replacement Replacement Blade, For Use With 35715 6-7/8 in Steel Toothed Recessed Light Hole Saw, Steel

MFR: Greenlee

MFR #: 35723

UPC: 783310357230

Item #: 103170

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 4-1/8" (104.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-4-1/8 Variable Pitch Hole Saw, 4-1/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4-1/8

UPC: 783310191773

Item #: 13045

Greenlee

830Q Quick Change Hole Saw Kit, For Use With 1/2 to 2 in Conduit, Bi-Metal

MFR: Greenlee

MFR #: 830Q

UPC: 783310028062

Item #: 82272

Greenlee

825-1-7/8 Variable Pitch Variable Pitch Hole Saw, 1-7/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-7/8

UPC: 783310191544

Item #: 103684

Greenlee

825-2-3/4 Variable Pitch Variable Pitch Hole Saw, 2-3/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-3/4

UPC: 783310191650

Item #: 144701

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2-1/4" (57.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-2-1/4 Variable Pitch Hole Saw, 2-1/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-1/4

UPC: 783310191599

Item #: 2948

Greenlee

35722 Replacement Replacement Blade, For Use With 35714 6-5/8 in Steel Toothed Recessed Light Hole Saw, Steel

MFR: Greenlee

MFR #: 35722

UPC: 783310357223

Item #: 105426

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 3-5/8" (92.1 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-3-5/8 Variable Pitch Hole Saw, 3-5/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3-5/8

UPC: 783310191728

Item #: 168367

Greenlee

Recessed Light Hole Saw Steel Toothed 4-3/8" (111mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.

35712 Recessed Light Hole Saw, 4-3/8 in Dia, 7/8 in D Cutting, Steel Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 35712

UPC: 783310357124

Item #: 162634

Greenlee

38544 Cam Retention Plate, For Use With 855 Smart Bender

MFR: Greenlee

MFR #: 38544

UPC: 783310385448

Item #: 107786

Greenlee

Shank Arbor with High-Speed Steel Pilot Drill Bit. 1/4" shank, 1/4" minimum chuck size. Use with 9/16" - 1-3/16" Hole Saws. The best arbor in the industry ensures a solid connection without any gaps or wobbling. Arbors include replaceable, high-speed steel pilot drill. Pilot drills have unique split-point tip design. Use with Greenlee bi-metal hole saws, recessed light holesaws and carbide-grit hole saws (carbide-tipped pilot drill sold separately). Can be used with Greenlee #901 or #904 bit extensions.

37157 Round Hole Saw Arbor, 1/4 in Hex Shank

MFR: Greenlee

MFR #: 37157

UPC: 783310371571

Item #: 140709

Discontinued

DOTTIE L H COMPANY

HSB18T Hack Saw Blade, 12 in L Blade, 18, Bi-Metal Blade

MFR: LH Dottie

MFR #: HSB18T

UPC: 781002293507

Item #: 101652

Discontinued

Milwaukee

6 in. 14 TPI Thin Kerf Ice Hardened SAWZALL Blades 5PK

48-00-4182 Ice Hardened Sawzall Double Duty Straight Back Thin Kerf Reciprocating Saw Blade, 6 in L x 3/4 in W, 14 TPI, Bi-Metal Body, Universal/Toothed Edge Tang

MFR: Milwaukee Electric Tool

MFR #: 48-00-4182

UPC: 045242081035

Item #: 50980

Discontinued

Milwaukee

6 in. 14 TPI THE TORCH Ice Hardened SAWZALL Blades 5PK

48-00-4782 Sawzall The Torch Ice Hardened Double Duty Straight Back Reciprocating Saw Blade, 6 in L x 1 in W, 14 TPI, Bi-Metal Body, Universal/Toothed Edge Tang

MFR: Milwaukee Electric Tool

MFR #: 48-00-4782

UPC: 045242081097

Item #: 361207

Discontinued

Milwaukee

48-89-2331 Red Helix Drill Bit Kit, 15 Pieces, For Use With All Twist Drill, Cobalt, Uncoated

MFR: Milwaukee Electric Tool

MFR #: 48-89-2331

UPC: 045242188468

Item #: 861789

Discontinued

Milwaukee

SHOCKWAVE 40-Piece Impact Duty Drill and Driver Bit Set

48-32-4006 Shockwave Impact Duty Drill and Drive Set, 1/4 in, Steel

MFR: Milwaukee Electric Tool

MFR #: 48-32-4006

UPC: 045242349586

Item #: 346072

Discontinued

Milwaukee

M18 FUEL Hole Hawg 1/2 in. Right Angle Drill - 6.0 Kit

2807-22 M18 FUEL Hole Hawg Cordless Right Angle Drill Kit, 1/2 in Keyed Chuck, 18 V, 1550 rpm No-Load, 15.6 in OAL, Li-Ion Battery

MFR: Milwaukee Electric Tool

MFR #: 2807-22

UPC: 045242560387

Item #: 1152724

Discontinued

Milwaukee

74-Piece SHOCKWAVE Impact Duty Driver Bit Set

48-32-4062 Shockwave 74-Pieces Impact Duty Driver Bit Set

MFR: Milwaukee Electric Tool

MFR #: 48-32-4062

UPC: 045242510665

Item #: 875687

Discontinued

Milwaukee

48-32-4028 Impact Duty Driver Bit Set, 55 Pieces, 1/4 in Shank, Steel

MFR: Milwaukee Electric Tool

MFR #: 48-32-4028

UPC: 045242516216

Item #: 861791

Filters