Features

• Fluke® 116 HVAC multimeter with temperature and micro amps, TL175 Hard Point® test lead set, TPak ToolPak® magnetic meter hanging strap, flexible cuff pipe clamp thermocouple, 80BK integrated temperature probe
• 80AK-A thermocouple adapter, C115 deluxe soft carrying case with shoulder strap
• Fluke® 62 MAX+ small in size, big on toughness, dust and water-resistant: IP54 rated, rugged 3 meter (9.8 ft) drop tested, ergonomically designed - completely redesigned for a more natural hand fit, distance to spot 12:1, dual lasers identifies area to be measured
• Fluke® 62 MAX+ - large, backlit display makes data easier to read, even in dark areas
• 600 mV range, 0.1 mV resolution, 1.0% + 3 (DC, 45 Hz to 500 Hz)/2.0% + 3 (500 Hz to 1 kHz)
• Continuity - 600 ohm range, 1 ohm resolution, beeper on < 20 ohm, Off > 250 ohm, detects opens or shorts of 500 us or longer
• Diode test - 2 V/0.001 V range/resolution, 0.9% + 2 accuracy
• Capacitance - 1000 nF/1 nF, 10.00 uF/0.01 uF, 100.0 uF/0.1 uF, 9999 uF/1 uF, 100 uF to 1000 uF range/resolution, 1.9% + 2 accuracy, > 1000 uF range/resolution, 5% + 20% accuracy
• LoZ capacitance - 1 nF to 500 uF range, 10% + 2 typical accuracy
• Temperature2 (Type K thermocouple) -40 to 400 deg C/0.1 deg C range/resolution, 1% + 102 accuracy, -40 to 752 deg F/0.2 deg F range/resolution, 1% + 182 accuracy
• 99.99 Hz/0.01 Hz, 999.99 Hz/0.1 Hz, 9.999 Hz/0.001 Hz, 50 Hz/0.01 Hz, 0.1% + 2 Hz range/resolution, 0.1% + 2 accuracy (V or A input)2
• Battery with 400 hr life for 116 HVAC multimeter
• -30 to 650 deg C temperature
• <300 ms (95% of reading) response time for 62 MAX+ infrared thermometer
• Built-in thermometer for HVAC applications
• Microamps to test flame sensors
• Low input impedance helps prevent false readings due to ghost voltage
• Work in poorly lit areas with the Large white LED backlit display
• True-RMS voltage and current for accurate measurements on non-linear loads
• Measures 10 A directly (20 A overload for 30 sec) without a current clamp