Terminal Blocks, Strips, and Accessories | Crescent Electric Supply Company

WAGO

2-conductor ground terminal block; 6 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 6,00 mm; green-yellow

282-907 2-Conductor Feed-Thru Terminal Block, DIN Rail Mount

MFR: WAGO

MFR #: 282-907

Item #: 1077869

WAGO

1-conductor/1-pin ground carrier terminal block; 2.5 mm; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2022-1207 Operating Tool Ground Carrier Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2022-1207

Item #: 1071506

WAGO

Triple-deck terminal block; 6-conductor ground terminal block; 2.5 mm; with marker carrier; internal commoning; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; green-yellow

280-597 Triple-Deck Ground Terminal Block, 800 V AC, 20 A, 28 to 14 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 280-597

Item #: 436733

WAGO

Double-deck terminal block; Ground conductor/through terminal block; 2.5 mm; PE/L; suitable for Ex e II applications; with marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2257 Operating Tool Through Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2257

Item #: 1070693

WAGO

3-conductor through terminal block; 4 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 4,00 mm; black

281-685 281 3-Conductor Terminal Block, 800 V, 32 A, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mounting

MFR: WAGO

MFR #: 281-685

Item #: 1077738

WAGO

1-conductor/1-pin carrier terminal block; 2.5 mm; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2022-1201 2022 1-Conductor Terminal Block, 690 V, 24 A, 22 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2022-1201

Item #: 1071502

WAGO

2-conductor through terminal block; with lever and Push-in CAGE CLAMP; 2.5 mm; with test port; suitable for Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; blue

2102-1204 Push-In Conductor Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2102-1204

Item #: 1073083

WAGO

2-conductor carrier terminal block; with push-button; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2202-1661 Operating Tool Conductor Terminal Block, 400 V, 16 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2202-1661

Item #: 1304026

WAGO

4-conductor terminal block; without push-buttons; suitable for Ex e II applications; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm ; 2.5 mm; CAGE CLAMP; 2,50 mm; light gray

264-280 Operating Tool Conductor Terminal Block, 28 to 12 AWG Wire, 1 Poles, Snap-Fit Mount

MFR: WAGO

MFR #: 264-280

Item #: 1076891

WAGO

4-conductor double deck terminal block; 8-conductor through terminal block; L; with marker carrier; internal commoning; conductor entry with violet marking; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2438 2002 Double Deck Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2002-2438

Item #: 1070707

WAGO

2-conductor through terminal block; 50 mm; lateral marker slots; only for DIN 35 x 15 rail; POWER CAGE CLAMP; 50,00 mm; dark gray-yellow

285-151 Operating Tool Conductor Terminal Block, 1 kV, 150 A, 8 to 1/0 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 285-151

Item #: 1077998

WAGO

2-conductor fuse terminal block; with pivoting fuse holder; with end plate; for glass cartridge fuse " x 1"; with blown fuse indication by LED; 120 V; for DIN-rail 35 x 15 and 35 x 7.5; 6 mm; Push-in CAGE CLAMP; 6,00 mm; gray

2006-1631/1099-867 2 Conductor Terminal Block, 800 V, 10 A, 20 to 8 AWG Wire

MFR: WAGO

MFR #: 2006-1631/1099-867

Item #: 1071007

WAGO

4-conductor through terminal block; 1.5 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 1,50 mm; black

279-835 Operating Tool Conductor Terminal Block, 800 V, 18 A, 28 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 279-835

Item #: 1077279

WAGO

2-conductor fuse terminal block; with pivoting fuse holder; with end plate; for glass cartridge fuse " x 1"; with blown fuse indication by LED; 380 - 500 V; for DIN-rail 35 x 15 and 35 x 7.5; 6 mm; Push-in CAGE CLAMP; 6,00 mm; gray

2006-1631/1099-859 2006 2-Conductor Terminal Block, 2.32 in L x 0.40 in W x 3.79 in H, Polyamide

MFR: WAGO

MFR #: 2006-1631/1099-859

Item #: 1237880

WAGO

2-conductor through terminal block; with push-button; 4 mm; with test port; suitable for Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 4,00 mm; blue

2204-1204 Operating Tool Conductor Terminal Block, 800 V, 32 A, 20 to 10 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2204-1204

Item #: 1073303

WAGO

4-conductor through terminal block; 1.5 mm; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 1,50 mm; light gray

279-994 Operating Tool Conductor Terminal Block, 28 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 279-994

Item #: 1077298

WAGO

3-conductor through terminal block; with push-button; 1 mm; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; gray

2200-1301 Operating Tool Conductor Terminal Block, 800 V, 13.5 A, 24 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2200-1301

Item #: 1073286

WAGO

Triple-deck terminal block; 6-conductor through terminal block; L; with marker carrier; suitable for Ex e II applications; internal commoning; conductor entry with violet marking; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-3238 Operating Tool Deck Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-3238

Item #: 865352

WAGO

4-conductor through terminal block; 1.5 mm; suitable for Ex i applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 1,50 mm; blue

279-834 Operating Tool Conductor Terminal Block, 800 V, 18 A, 28 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 279-834

Item #: 1077278

WAGO

Double-deck carrier terminal block; L/L; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2961 Operating Tool Deck Terminal Block, 400 V, 16 A, 22 to 12 AWG Wire, 5 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2961

Item #: 1070740

WAGO

3-conductor through terminal block; 6 mm; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 6,00 mm; light gray

282-993 Operating Tool Conductor Terminal Block, 24 to 10 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 282-993

Item #: 1077872

WAGO

4-level same potential terminal block; without locking clips; all clamping units internally commoned; with 2.3 mm test port; for 35 x 7.5 mounting rail; 1.5 mm; 1,50 mm; light gray

727-228 Operating Tool Terminal Block Matrix Patching, 250 V, 18 A, 28 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 727-228

Item #: 1079431

WAGO

Compact terminal block; for 3-phase current transformer circuit; 6,00 mm; multicoloured

2007-8876 Operating Tool Compact Terminal Block, 500 V, 20 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2007-8876

Item #: 1071081

WAGO

3-conductor through terminal block; 1.5 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,50 mm; black

2001-1305 Operating Tool Conductor Terminal Block, 800 V, 18 A, 22 to 14 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2001-1305

Item #: 1070518

WAGO

4-conductor shield terminal block; 2.5 mm; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; white

2002-1408 2002 4-Conductor Terminal Block, 22 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2002-1408

Item #: 1070596

WAGO

4-conductor through terminal block; 2.5 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; red

280-830 Terminal Block, 800 V AC, 20 A, 28 to 12 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 280-830

Item #: 508139

WAGO

2-conductor end terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm ; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

264-301 264 2-Conductor Terminal Block, 800 V, 24 A, 28 to 12 AWG Wire, 1 Poles, Flange Mounting

MFR: WAGO

MFR #: 264-301

Item #: 284564

WAGO

Double-deck terminal block; Through/through terminal block; L/N; without marker carrier; suitable for Ex e II applications; Blue conductor entry upper deck; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2203 Operating Tool Deck Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2203

Item #: 1070659

WAGO

3-conductor fuse terminal block; with pivoting fuse holder; with end plate; for 5 x 20 mm miniature metric fuse; with blown fuse indication by LED; 120 V; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1711/1000-867, 250 V, 6.3 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1711/1000-867

Item #: 1070621

WAGO

2-conductor terminal block; on both sides with push-button; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm ; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

261-301/341-000 Operating Tool Conductor Terminal Block, 500 V, 24 A, 28 to 14 AWG Wire, 1 Poles, Surface Mount

MFR: WAGO

MFR #: 261-301/341-000

Item #: 1076421

WAGO

4-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm ; 4 mm; CAGE CLAMP; 4,00 mm; gray

262-341 Operating Tool Conductor Terminal Block, 690 V, 32 A, 28 to 12 AWG Wire, 1 Poles, Snap-Fit Mount

MFR: WAGO

MFR #: 262-341

Item #: 1076671

WAGO

Triple-deck terminal block; Through/through/through terminal block; L/L/N; without marker carrier; suitable for Ex e II applications; Blue conductor entry upper deck; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-3203 Operating Tool Deck Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 3 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-3203

Item #: 1070747

WAGO

3-conductor through terminal block; 1 mm; for Ex e II and Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; blue

2000-1304 Operating Tool Conductor Terminal Block, 800 V, 13.5 A, 24 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2000-1304

Item #: 1070395

WAGO

Double-deck terminal block; Through/through terminal block; N/N; without marker carrier; for Ex e II and Ex i applications; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; blue

2002-2704 Operating Tool Deck Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2704

Item #: 1070727

WAGO

4-conductor through terminal block; 1 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; yellow

2000-1406 Operating Tool Conductor Terminal Block, 800 V, 13.5 A, 24 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2000-1406

Item #: 1070403

WAGO

2-conductor through terminal block; 10 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 10,00 mm; orange

2010-1202 Operating Tool Conductor Terminal Block, 800 V, 57 A, 20 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2010-1202

Item #: 1071148

WAGO

4-conductor double deck terminal block; Through/through terminal block; N/L; without marker carrier; Blue conductor entry lower deck; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2402 2002 4-Conductor Terminal Block, 2.05 in L x 0.20 in W x 4.13 in H, Polyamide

MFR: WAGO

MFR #: 2002-2402

Item #: 1070697

WAGO

4-conductor terminal strip; without push-buttons; with fixing flanges; 4-pole; for screw or similar mounting types; Fixing hole 3.2 mm ; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

261-204 Operating Tool Terminal Strip, 28 to 14 AWG Conductor, 0.31 to 0.35 in L, Polyamide

MFR: WAGO

MFR #: 261-204

Item #: 1076382

WAGO

4-conductor terminal strip; without push-buttons; with fixing flanges; 2-pole; for screw or similar mounting types; Fixing hole 3.2 mm ; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

261-202 Operating Tool Terminal Strip, 28 to 14 AWG Conductor, 0.31 to 0.35 in L, Polyamide

MFR: WAGO

MFR #: 261-202

Item #: 1076376

WAGO

2-conductor terminal strip; on both sides with push-buttons; with fixing flanges; 12-pole; for screw or similar mounting types; Fixing hole 3.2 mm ; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

261-112/341-000 Operating Tool Terminal Strip, 28 to 14 AWG Conductor, 0.31 to 0.35 in L, Polyamide

MFR: WAGO

MFR #: 261-112/341-000

Item #: 1076352

WAGO

4-conductor terminal strip; without push-buttons; with snap-in mounting feet; 5-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm ; 4 mm; CAGE CLAMP; 4,00 mm; gray

262-255 Operating Tool Terminal Strip, 28 to 12 AWG Conductor, 0.35 to 0.39 in L, Polyamide

MFR: WAGO

MFR #: 262-255

Item #: 1076634

WAGO

Operating tool; Blades: 3.5 x 0.5 mm and 5.5 x 0.8 mm; for TOPJOBS installation terminal blocks; green

2009-310 Operating Tool, Green

MFR: WAGO

MFR #: 2009-310

Item #: 204366

WAGO

2-conductor/2-pin carrier terminal block; 2.5 mm; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2022-1401 2022 2-Conductor Terminal Block, 1.43 in L x 0.20 in W x 3.39 in H, Polyamide

MFR: WAGO

MFR #: 2022-1401

Item #: 1071516

WAGO

3-conductor through terminal block; 4 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 4,00 mm; orange

2004-1302 Operating Tool Conductor Terminal Block, 800 V, 32 A, 20 to 10 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2004-1302

Item #: 1070922

WAGO

3-conductor through terminal block; 16 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 16,00 mm; blue

283-674 Operating Tool Conductor Terminal Block, 800 V, 76 A, 24 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 283-674

Item #: 785422

WAGO

Double-deck terminal block; 4-conductor through terminal block; L; without marker carrier; suitable for Ex e II applications; internal commoning; conductor entry with violet marking; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2708 2002 Terminal Block, 800 V, 28 A, 22 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2002-2708

Item #: 1070729

WAGO

3-conductor through terminal block; with push-button; 1 mm; with test port; suitable for Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; blue

2200-1304 Operating Tool Conductor Terminal Block, 800 V, 13.5 A, 24 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2200-1304

Item #: 1073287

WAGO

Compact terminal block; for current transformer circuit; 6,00 mm; multicoloured

2007-8875 Operating Tool Compact Terminal Block, 500 V, 20 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2007-8875

Item #: 1071080

Filters