Terminal Blocks, Strips, and Accessories | Crescent Electric Supply Company

WAGO

3-conductor ground terminal block; 2.5 mm; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; green-yellow

280-637/999-950 Operating Tool Ground Terminal Block, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-637/999-950

Item #: 1077501

WAGO

2-conductor ground terminal block; 2.5 mm; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; green-yellow

280-107 280 2-Conductor Terminal Block, 28 to 12 AWG Wire, 2 Poles, DIN Rail Mounting

MFR: WAGO

MFR #: 280-107

Item #: 1077302

WAGO

4-conductor double deck terminal block; 8-conductor ground terminal block; 2.5 mm; PE; suitable for Ex e II applications; without marker carrier; internal commoning; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2002-2407 Operating Tool Ground Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2407

Item #: 1070699

WAGO

Double-deck terminal block; 4-conductor ground terminal block; 1 mm; PE; without marker carrier; internal commoning; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; green-yellow

2000-2207 Operating Tool Ground Terminal Block, 24 to 16 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2000-2207

Item #: 1070411

WAGO

Double-deck terminal block; Ground conductor/through terminal block; 2.5 mm; PE/L; suitable for Ex e II applications; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2227 Operating Tool Through Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2227

Item #: 1070676

WAGO

3-conductor ground terminal block; 2.5 mm; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2002-1707 Operating Tool Ground Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1707

Item #: 1070618

WAGO

2-conductor ground terminal block; 6 mm; with touch-proof test socket; for 4 mm test plugs; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 6,00 mm; green-yellow

2007-8807 Operating Tool Ground Terminal Block, 20 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2007-8807

Item #: 1071076

WAGO

2-conductor/1-pin ground carrier terminal block; 2.5 mm; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2022-1307 2022 2-Conductor Terminal Block, 1.43 in L x 0.20 in W x 2.43 in H, Polyamide

MFR: WAGO

MFR #: 2022-1307

Item #: 1071513

WAGO

3-conductor ground terminal block; 1 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; green-yellow

2000-1307 Operating Tool Ground Terminal Block, 24 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2000-1307

Item #: 1070397

WAGO

2-conductor ground terminal block; 10 mm; suitable for Ex e II applications; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 10,00 mm; green-yellow

284-607/999-950 Operating Tool Ground Terminal Block, 24 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 284-607/999-950

Item #: 1077960

WAGO

2-conductor ground terminal block; 16 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 16,00 mm; green-yellow

283-907 Operating Tool Ground Terminal Block, 24 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 283-907

Item #: 99321

WAGO

4-conductor double deck terminal block; 8-conductor ground terminal block; 2.5 mm; PE; suitable for Ex e II applications; with marker carrier; internal commoning; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2002-2437 Operating Tool Ground Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2437

Item #: 1070706

WAGO

4-conductor ground terminal block; 4 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 4,00 mm; green-yellow

281-657 Ground Terminal Block, 26 A, 28 to 12 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 281-657

Item #: 1077717

WAGO

3-conductor ground terminal block; 16 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 16,00 mm; green-yellow

283-677 Operating Tool Ground Terminal Block, 24 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 283-677

Item #: 1077908

WAGO

2-conductor ground terminal block; with lever and Push-in CAGE CLAMP; 2.5 mm; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2102-1207 Lever Ground Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2102-1207

Item #: 1073084

WAGO

2-conductor ground terminal block; 70 mm; SCREW CLAMP CONNECTION; 70,00 mm; green-yellow

883-7007 T-Wrench Ground Terminal Block, 8 to 3/0 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 883-7007

Item #: 1238896

WAGO

4-conductor double deck terminal block; Ground conductor/through terminal block; 2.5 mm; PE/N; with marker carrier; Blue conductor entry upper deck; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2447 Operating Tool Through Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2447

Item #: 1070709

WAGO

Component terminal block; 4-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-623/281-410 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 14 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-623/281-410

Item #: 1077494

WAGO

Component terminal block; 4-conductor; with diode 1N5408; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm; CAGE CLAMP; 4,00 mm; gray

281-665/281-401 Operating Tool Component Terminal Block, 250 V, 1.5 A, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 281-665/281-401

Item #: 1077725

WAGO

Component terminal block; double-deck; with end plate; with gas-filled surge arrester; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-503/281-579 Double-Deck Component Terminal Block, 24 V AC/DC, 20 A, 28 to 14 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 280-503/281-579

Item #: 1077392

WAGO

Component terminal block; 2-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-915/281-410 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 14 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-915/281-410

Item #: 973616

WAGO

Component terminal block; double-deck; with 2 diodes 1N4007; Top anode, right-side anode; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2214/1000-491 Operating Tool Component Terminal Block, 250 V, 0.5 A, 22 to 12 AWG Wire, 4 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2214/1000-491

Item #: 1070670

WAGO

Component terminal block; 4-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 1.5 mm; CAGE CLAMP; 1,50 mm; gray

279-815/281-410 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 279-815/281-410

Item #: 1077272

WAGO

Component terminal block; double-deck; with end plate; with 1.5KE33C TVS diode; 24 VDC; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-944/281-589 280 Terminal Block, 24 V DC, 20 A, 28 to 14 AWG Wire, 4 Poles, DIN Rail Mounting

MFR: WAGO

MFR #: 280-944/281-589

Item #: 1299499

WAGO

Component terminal block; 3-conductor; LED (red); 24 VDC; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1321/1000-434 Operating Tool Component Terminal Block, 24 V, 0.025 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1321/1000-434

Item #: 1070589

WAGO

4-conductor through terminal block; 1 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; orange

2000-1402 2000 4 Conductor Terminal Block, 800 V, 17.5 A, 24 to 16 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2000-1402

Item #: 1070400

WAGO

Double-deck terminal block; Through/through terminal block; with additional jumper position on lower level; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; blue/gray

280-524 280 Double Deck Terminal Block, 500 V, 20 A, 28 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 280-524

Item #: 1077410

WAGO

2-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm ; 1.5 mm; CAGE CLAMP; 1,50 mm; gray

260-301 260 2-Conductor Terminal Block, 400 V, 18 A, 28 to 16 AWG Wire, 1 Poles, Flange Mounting

MFR: WAGO

MFR #: 260-301

Item #: 1076184

WAGO

2002-1321/1000-413 Operating Tool Component Terminal Block, 24 V, 0.025 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1321/1000-413

Item #: 1070588

WAGO

Component terminal block; 4-conductor; with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm; CAGE CLAMP; 4,00 mm; gray

281-665/281-411 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 281-665/281-411

Item #: 1077727

WAGO

Component terminal block; double-deck; with suppressor diode; AC 115 V; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

870-523/281-594 Double-Deck Component Terminal Block, 115 V AC, 20 A, 28 to 14 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 870-523/281-594

Item #: 1084333

WAGO

Component terminal block; 4-conductor; with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-623/281-411 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 14 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-623/281-411

Item #: 1024270

WAGO

3-conductor disconnect/test terminal block; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; blue

2002-1774 Operating Tool Test Terminal Block, 400 V, 16 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1774

Item #: 1070626

WAGO

3-conductor disconnect/test terminal block; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1771 Operating Tool Test Terminal Block, 400 V, 16 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1771

Item #: 1016993

WAGO

2002-2602 Operating Tool Deck Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2602

Item #: 1070713

WAGO

1-conductor power distribution disconnect terminal block; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-7111 Operating Tool Disconnect Terminal Block, 250 V, 24 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-7111

Item #: 1070868

WAGO

1-conductor N-disconnect terminal block; 16 mm; Push-in CAGE CLAMP; 16,00 mm; blue

2016-7114 Operating Tool Disconnect Terminal Block, 250 V, 72 A, 14 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2016-7114

Item #: 1071200

WAGO

4-conductor disconnect/test terminal block; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1871 2002 4-Conductor Terminal Block, 1.29 in L x 0.20 in W x 3.44 in H, Polyamide

MFR: WAGO

MFR #: 2002-1871

Item #: 1016627

WAGO

2-conductor disconnect terminal block; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 6 mm; CAGE CLAMP; 6,00 mm; blue

282-695 282 2-Conductor Fuse Terminal Block, 400 V, 30 A, 22 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 282-695

Item #: 1077844

WAGO

2-conductor disconnect terminal block; with pivoting knife disconnect; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 6 mm; Push-in CAGE CLAMP; 6,00 mm; gray

2006-1671 Operating Tool Disconnect Terminal Block, 800 V, 30 A, 20 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2006-1671

Item #: 1071009

WAGO

2-conductor disconnect/test terminal block; e.g., current transformer circuits; with receptacle for adjacent jumper with switch lever; for 4 mm test plugs; for DIN-rail 35 x 15 and 35 x 7.5; 6 mm; Push-in CAGE CLAMP; 6,00 mm; gray

2007-8821 2007 2-Conductor Terminal Block, 500 V, 30 A, 20 to 8 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2007-8821

Item #: 1071078

WAGO

3-conductor disconnect/test terminal block; with push-button; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2202-1771 Operating Tool Test Terminal Block, 400 V, 16 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2202-1771

Item #: 1236958

WAGO

Disconnect plug for carrier terminal blocks; for using a receptacle terminal block as a disconnect terminal block; orange

2002-401 Disconnect Terminal Block, 10 A

MFR: WAGO

MFR #: 2002-401

Item #: 1060391

WAGO

2002-1601 Operating Tool Conductor Terminal Block, 400 V, 16 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1601

Item #: 1070604

WAGO

Double-deck terminal block; Through/through terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray/blue

280-533 Operating Tool Deck Terminal Block, 500 V, 20 A, 28 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-533

Item #: 1077418

WAGO

2-conductor through terminal block; 16 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 16,00 mm; red

2016-1203 Operating Tool Conductor Terminal Block, 800 V, 76 A, 20 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2016-1203

Item #: 1071173

WAGO

2-conductor actuator terminal block; with colored conductor entries; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-565/280-321 Operating Tool Sensor Terminal Block, 125 V, 6.3 A, 28 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-565/280-321

Item #: 1077445

WAGO

Space-saving, 2-conductor end terminal block; without push-buttons; without protruding snap-in mounting foot; 1-pole; for terminal strips with snap-in mounting feet; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

261-321 Operating Tool Conductor Terminal Block, 500 V, 24 A, 28 to 14 AWG Wire, 1 Poles, Snap-Fit Mount

MFR: WAGO

MFR #: 261-321

Item #: 1076448

Filters