Main Content Starts Here

Terminal Blocks

Showing 2017 - 2064 of 2478 Items

filter_alt Filters

Sort By

Per Page

Brand

Ways to Shop

Material

Color

Brand

Ways to Shop

Material

Color

Sort By

Per Page

WAGO

3-conductor through terminal block; with push-button; 6 mm; with test port; suitable for Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 6,00 mm; blue

2206-1304 Operating Tool Conductor Terminal Block, 800 V, 41 A, 20 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2206-1304

Item #: 1073314

WAGO

Compact terminal block; for current and voltage transformers; 6,00 mm; multicoloured

2007-8873 2007 Terminal Block, 2.57 in L x 4.40 in W x 3.92 in H, Polyamide

MFR: WAGO

MFR #: 2007-8873

Item #: 1015795

WAGO

Double-deck terminal block; Through/through terminal block; with additional jumper position on lower level; suitable for Ex i applications; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; blue/blue

280-530 Operating Tool Deck Terminal Block, 500 V, 20 A, 28 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-530

Item #: 1077416

WAGO

3-conductor through terminal block; 1.5 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,50 mm; red

2001-1303 Operating Tool Conductor Terminal Block, 800 V, 18 A, 22 to 14 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2001-1303

Item #: 1070516

WAGO

2-conductor miniature through terminal block; 2.5 mm; with test option; center marking; for DIN-15 rail; CAGE CLAMP; 2,50 mm; gray

264-701 Operating Tool Miniature Through Terminal Block, 800 V, 24 A, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 264-701

Item #: 1076942

WAGO

2-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm ; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

264-311 Operating Tool Conductor Terminal Block, 800 V, 24 A, 28 to 12 AWG Wire, 1 Poles, Snap-Fit Mount

MFR: WAGO

MFR #: 264-311

Item #: 1076912

WAGO

2-conductor actuator supply terminal block; with colored conductor entries; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-592 Operating Tool Actuator Supply Terminal Block, 400 V, 20 A, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-592

Item #: 1077482

WAGO

4-conductor through terminal block; 1.5 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 1,50 mm; gray

279-831 Terminal Block, 800 V AC, 18 A, 28 to 16 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 279-831

Item #: 1077275

WAGO

Double-deck terminal block; Through/through terminal block; N/L; without marker carrier; Blue conductor entry lower deck; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; gray

2000-2202 Operating Tool Deck Terminal Block, 500 V, 13.5 A, 24 to 16 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2000-2202

Item #: 1070408

WAGO

2-conductor through terminal block; 1 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; yellow

2000-1206 2000 2-Conductor Terminal Block, 1.29 in L x 0.13 in W x 1.9 in H, Polyamide

MFR: WAGO

MFR #: 2000-1206

Item #: 1070389

WAGO

Quadruple-deck rail-mounted terminal block; Rail-mounted terminal block for electric motor wiring; L1 - L2 - L3; with marker carrier; suitable for Ex e II applications; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-4131 Operating Tool Deck Terminal Block, 800 V, 20 A, 22 to 12 AWG Wire, 3 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-4131

Item #: 1070805

WAGO

2-conductor fuse terminal block; with pivoting fuse holder; with additional jumper position; for 5 x 20 mm miniature metric fuse; with blown fuse indication by LED; 12 - 30 V; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1911/1000-541 2002 2-Conductor Terminal Block, 2.26 in L x 0.24 in W x 2.87 in H, Polyamide

MFR: WAGO

MFR #: 2002-1911/1000-541

Item #: 1070643

WAGO

1-conductor/1-pin carrier terminal block; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; blue

2020-1204 Operating Tool Conductor Terminal Block, 500 V, 13.5 A, 24 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2020-1204

Item #: 1071253

WAGO

Double-deck terminal block; 4-conductor through terminal block; N; without marker carrier; for Ex e II and Ex i applications; internal commoning; conductor entry with violet marking; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; blue

2002-2709 Operating Tool Deck Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2709

Item #: 1070730

WAGO

3-conductor through terminal block; 4 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 4,00 mm; yellow

2004-1306 Operating Tool Conductor Terminal Block, 800 V, 32 A, 20 to 10 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2004-1306

Item #: 1070925

WAGO

4-conductor through terminal block; 2.5 mm; suitable for Ex i applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; blue

280-656 280 4-Conductor Terminal Block, 800 V, 24 A, 28 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 280-656

Item #: 1077512

WAGO

Double-deck terminal block; Through/through terminal block; L/N; without marker carrier; suitable for Ex e II applications; Blue conductor entry upper deck; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2703 Operating Tool Deck Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2703

Item #: 1070726

WAGO

2-conductor through terminal block; 50 mm; lateral marker slots; only for DIN 35 x 15 rail; POWER CAGE CLAMP; 50,00 mm; blue

285-154 285 Cage Clamp Terminal Block, 1 kV, 150 A, 8 to 1/0 AWG Wire, 1 Poles, DIN Rail Mounting

MFR: WAGO

MFR #: 285-154

Item #: 1077999

WAGO

2-conductor through terminal block; 1.5 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 1,50 mm; gray

279-901 Operating Tool Conductor Terminal Block, 800 V, 18 A, 28 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 279-901

Item #: 1077284

WAGO

Double-deck carrier terminal block; N/L; upper-deck base; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2662 Operating Tool Deck Terminal Block, 400 V, 16 A, 22 to 12 AWG Wire, 3 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2662

Item #: 1070721

WAGO

3-conductor through terminal block; 1 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; orange

2000-1302 2000 3 Conductor Terminal Block, 800 V, 20 A, 24 to 16 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2000-1302

Item #: 1070393

WAGO

2-conductor through terminal block; 10 mm; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 10,00 mm; blue

284-104 Operating Tool Conductor Terminal Block, 800 V, 57 A, 24 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 284-104

Item #: 1077916

WAGO

1-conductor/1-pin double deck receptacle terminal block; Through/through terminal block; L/L; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; gray

2020-2201 Operating Tool Conductor Terminal Block, 500 V, 13.5 A, 24 to 16 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2020-2201

Item #: 1071330

WAGO

Double-deck terminal block; with additional jumper position on lower level; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; blue/gray

280-532 Operating Tool Deck Terminal Block, 400 V, 28 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-532

Item #: 1077417

WAGO

Double-deck terminal block; Through/through terminal block; N/N; with marker carrier; for Ex e II and Ex i applications; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; blue

2002-2234 Operating Tool Deck Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2234

Item #: 1070683

WAGO

1-conductor/1-pin double deck receptacle terminal block; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2022-2201 Operating Tool Conductor Terminal Block, 690 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2022-2201

Item #: 1071539

WAGO

3-conductor through terminal block; 10 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 10,00 mm; blue

284-684 Operating Tool Conductor Terminal Block, 800 V, 57 A, 24 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 284-684

Item #: 1077965

WAGO

2-conductor through terminal block; with lever and push-button; 2.5 mm; with test port; suitable for Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; blue

2102-5204 Push-In Conductor Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2102-5204

Item #: 1073093

WAGO

2-conductor through terminal block; 2.5 mm; side and center marking; for DIN-15 rail; CAGE CLAMP; 2,50 mm; gray

870-911 Operating Tool Conductor Terminal Block, 500 V, 24 A, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 870-911

Item #: 112703

WAGO

2-conductor through terminal block; 2.5 mm; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; gray

280-101 2-Conductor Through Terminal Block, 800 V, 24 A, 28 to 12 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 280-101

Item #: 1077300

WAGO

2-conductor fuse terminal block; for 5 x 20 mm miniature metric fuse; with blown fuse indication by neon lamp; for DIN-rail 35 x 15 and 35 x 7.5; 6 mm; CAGE CLAMP; 6,00 mm; gray

282-124, 250 V, 24 to 10 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 282-124

Item #: 1077758

WAGO

2-conductor fuse terminal block; for mini-automotive blade-style fuses; per DIN 7258-3f, ISO 8820-3; with test option; with push-button; without blown fuse indication; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2202-1681 2 Conductor Terminal Block, 400 V, 10 A, 22 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2202-1681

Item #: 1294245

WAGO

Double-deck terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray/gray

280-528 Operating Tool Deck Terminal Block, 400 V, 28 to 12 AWG Wire, 3 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-528

Item #: 1077414

WAGO

4-conductor fuse terminal block; with pivoting fuse holder; with end plate; for 5 x 20 mm miniature metric fuse; with blown fuse indication by LED; 30 - 65 V; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1811/1000-542 2002 4-Conductor Terminal Block, 2.26 in L x 0.22 in W x 3.44 in H, Polyamide

MFR: WAGO

MFR #: 2002-1811/1000-542

Item #: 1070632

WAGO

2004-1303 Operating Tool Conductor Terminal Block, 800 V, 32 A, 20 to 10 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2004-1303

Item #: 1070923

WAGO

2-conductor fuse terminal block; for mini-automotive blade-style fuses; with test option; with blown fuse indication by LED; 12 V; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1981/1000-429, 400 V, 10 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1981/1000-429

Item #: 1070652

WAGO

Triple-deck terminal block; 6-conductor through terminal block; N; without marker carrier; for Ex e II and Ex i applications; internal commoning; conductor entry with violet marking; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; blue

2002-3209 Operating Tool Deck Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-3209

Item #: 1070751

WAGO

3-conductor through terminal block; 10 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 10,00 mm; orange

284-682 Operating Tool Conductor Terminal Block, 800 V, 57 A, 24 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 284-682

Item #: 1077964

WAGO

4-conductor double deck terminal block; Through/through terminal block; L/L; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2401 Operating Tool Deck Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2401

Item #: 1070696

WAGO

2-conductor/1-pin carrier terminal block; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; blue

2020-1304 Operating Tool Conductor Terminal Block, 500 V, 13.5 A, 24 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2020-1304

Item #: 1071258

WAGO

Quadruple-deck rail-mounted terminal block; Rail-mounted terminal block for electric motor wiring; L1 - L2; without marker carrier; suitable for Ex e II applications; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-4111 Operating Tool Deck Terminal Block, 800 V, 20 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-4111

Item #: 1070803

WAGO

2-conductor fuse terminal block; with pivoting fuse holder; with additional jumper position; for 5 x 20 mm miniature metric fuse; with push-button; with blown fuse indication by LED; 120 V; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2202-1911/1000-867, 250 V, 6.3 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2202-1911/1000-867

Item #: 1304027

WAGO

261-311 Operating Tool Conductor Terminal Block, 500 V, 24 A, 28 to 14 AWG Wire, 1 Poles, Snap-Fit Mount

MFR: WAGO

MFR #: 261-311

Item #: 1076434

WAGO

2000-1202 2000 2-Conductor Terminal Block, 1.29 in L x 0.13 in W x 1.9 in H, Polyamide

MFR: WAGO

MFR #: 2000-1202

Item #: 1070385

WAGO

2-conductor through terminal block; 1.5 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,50 mm; black

2001-1205 2001 2-Conductor Terminal Block, 1.29 in L x 0.16 in W x 1.9 in H, Polyamide

MFR: WAGO

MFR #: 2001-1205

Item #: 1070509

WAGO

2-conductor carrier terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-916 Operating Tool Conductor Terminal Block, 400 V, 28 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-916

Item #: 77511

WAGO

3-conductor through terminal block; 1.5 mm; for Ex e II and Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,50 mm; blue

2001-1304 Operating Tool Conductor Terminal Block, 800 V, 18 A, 22 to 14 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2001-1304

Item #: 1070517

WAGO

4-conductor double deck terminal block; 8-conductor through terminal block; L; without marker carrier; internal commoning; conductor entry with violet marking; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2408 2002 Double Deck Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2002-2408

Item #: 1070700

About Terminal Blocks

Terminal blocks are a critical component of electrical systems. Terminal blocks are used to secure and terminate single pole wires, connecting them to circuits or other parts of the system. Terminal blocks are available in a wide range of sizes and shapes depending on the application.