Skip to Main Content Skip to Footer Content

How are we doing? Share feedback about your online experience with us. Take Survey ↗

Main Content Starts Here

Terminal Blocks

Showing 1825 - 1872 of 2478 Items

filter_alt Filters (1)

Sort By

Per Page

Sort By

Per Page

WAGO

Separator plate; oversized upper deck; snap-fit type; 2 mm thick; gray

2002-2295 Half Sine Separator Plate, Polyamide, Gray

MFR: WAGO

MFR #: 2002-2295

Item #: 1070694

WAGO

2-conductor/2-pin ground carrier terminal block; 2.5 mm; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2022-1407 2022 2-Conductor Terminal Block, 22 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2022-1407

Item #: 1071518

WAGO

Triple-deck terminal block; Shield/through/through terminal block; 2.5 mm; with marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; green-yellow/blue/gray

280-547 Operating Tool Deck Terminal Block, 500 V, 20 A, 28 to 12 AWG Wire, 3 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-547

Item #: 1077424

WAGO

Double-deck terminal block; Ground conductor/through terminal block; 2.5 mm; PE/N; suitable for Ex e II applications; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2217 Operating Tool Through Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2217

Item #: 1070672

WAGO

Double-deck terminal block; with push-button; 2.5 mm; PE/L; suitable for Ex e II applications; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2202-2727 Operating Tool Deck Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2202-2727

Item #: 1309209

WAGO

3-conductor actuator supply terminal block; for PNP-(high-side) switching actuators; with ground contact; with colored conductor entries; 1 mm; Push-in CAGE CLAMP; 1,00 mm; gray

2000-5317/102-000 Operating Tool Actuator Supply Terminal Block, 250 V, 13.5 A, 20 to 16 AWG Wire, 4 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2000-5317/102-000

Item #: 1070479

WAGO

Triple-deck terminal block; Ground conductor/through/through terminal block; 2.5 mm; PE/L/L; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; gray

870-577 Operating Tool Through Terminal Block, 500 V, 24 A, 28 to 12 AWG Wire, 3 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 870-577

Item #: 1084361

WAGO

2-conductor ground terminal block; with lever and Push-in CAGE CLAMP; 10 mm; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 10,00 mm; green-yellow

2110-1207 Lever Ground Terminal Block, 20 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2110-1207

Item #: 1307999

WAGO

Double-deck terminal block; 4-conductor ground terminal block; 2.5 mm; PE; suitable for Ex e II applications; without marker carrier; internal commoning; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2002-2707 Operating Tool Ground Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2707

Item #: 1070728

WAGO

3-conductor ground terminal block; 2.5 mm; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; green-yellow

280-637/999-950 Operating Tool Ground Terminal Block, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-637/999-950

Item #: 1077501

WAGO

2-conductor ground terminal block; 2.5 mm; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 2,50 mm; green-yellow

280-107 280 2-Conductor Terminal Block, 28 to 12 AWG Wire, 2 Poles, DIN Rail Mounting

MFR: WAGO

MFR #: 280-107

Item #: 1077302

WAGO

4-conductor double deck terminal block; 8-conductor ground terminal block; 2.5 mm; PE; suitable for Ex e II applications; without marker carrier; internal commoning; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2002-2407 Operating Tool Ground Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2407

Item #: 1070699

WAGO

Double-deck terminal block; 4-conductor ground terminal block; 1 mm; PE; without marker carrier; internal commoning; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; green-yellow

2000-2207 Operating Tool Ground Terminal Block, 24 to 16 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2000-2207

Item #: 1070411

WAGO

Double-deck terminal block; Ground conductor/through terminal block; 2.5 mm; PE/L; suitable for Ex e II applications; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2227 Operating Tool Through Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2227

Item #: 1070676

WAGO

3-conductor ground terminal block; 2.5 mm; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2002-1707 Operating Tool Ground Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1707

Item #: 1070618

WAGO

2-conductor ground terminal block; 6 mm; with touch-proof test socket; for 4 mm test plugs; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 6,00 mm; green-yellow

2007-8807 Operating Tool Ground Terminal Block, 20 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2007-8807

Item #: 1071076

WAGO

2-conductor/1-pin ground carrier terminal block; 2.5 mm; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2022-1307 2022 2-Conductor Terminal Block, 1.43 in L x 0.20 in W x 2.43 in H, Polyamide

MFR: WAGO

MFR #: 2022-1307

Item #: 1071513

WAGO

3-conductor ground terminal block; 1 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; green-yellow

2000-1307 Operating Tool Ground Terminal Block, 24 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2000-1307

Item #: 1070397

WAGO

2-conductor ground terminal block; 10 mm; suitable for Ex e II applications; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 10,00 mm; green-yellow

284-607/999-950 Operating Tool Ground Terminal Block, 24 to 8 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 284-607/999-950

Item #: 1077960

WAGO

2-conductor ground terminal block; 16 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 16,00 mm; green-yellow

283-907 Operating Tool Ground Terminal Block, 24 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 283-907

Item #: 99321

WAGO

4-conductor double deck terminal block; 8-conductor ground terminal block; 2.5 mm; PE; suitable for Ex e II applications; with marker carrier; internal commoning; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2002-2437 Operating Tool Ground Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2437

Item #: 1070706

WAGO

4-conductor ground terminal block; 4 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 4,00 mm; green-yellow

281-657 Ground Terminal Block, 26 A, 28 to 12 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 281-657

Item #: 1077717

WAGO

3-conductor ground terminal block; 16 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 16,00 mm; green-yellow

283-677 Operating Tool Ground Terminal Block, 24 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 283-677

Item #: 1077908

WAGO

2-conductor ground terminal block; with lever and Push-in CAGE CLAMP; 2.5 mm; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; green-yellow

2102-1207 Lever Ground Terminal Block, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2102-1207

Item #: 1073084

WAGO

2-conductor ground terminal block; 70 mm; SCREW CLAMP CONNECTION; 70,00 mm; green-yellow

883-7007 T-Wrench Ground Terminal Block, 8 to 3/0 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 883-7007

Item #: 1238896

WAGO

4-conductor double deck terminal block; Ground conductor/through terminal block; 2.5 mm; PE/N; with marker carrier; Blue conductor entry upper deck; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2447 Operating Tool Through Terminal Block, 800 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2447

Item #: 1070709

WAGO

Component terminal block; 4-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-623/281-410 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 14 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-623/281-410

Item #: 1077494

WAGO

Component terminal block; 4-conductor; with diode 1N5408; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm; CAGE CLAMP; 4,00 mm; gray

281-665/281-401 Operating Tool Component Terminal Block, 250 V, 1.5 A, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 281-665/281-401

Item #: 1077725

WAGO

Component terminal block; double-deck; with end plate; with gas-filled surge arrester; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-503/281-579 Double-Deck Component Terminal Block, 24 V AC/DC, 20 A, 28 to 14 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 280-503/281-579

Item #: 1077392

WAGO

Component terminal block; 2-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-915/281-410 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 14 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-915/281-410

Item #: 973616

WAGO

Component terminal block; double-deck; with 2 diodes 1N4007; Top anode, right-side anode; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-2214/1000-491 Operating Tool Component Terminal Block, 250 V, 0.5 A, 22 to 12 AWG Wire, 4 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2214/1000-491

Item #: 1070670

WAGO

Component terminal block; 4-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 1.5 mm; CAGE CLAMP; 1,50 mm; gray

279-815/281-410 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 16 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 279-815/281-410

Item #: 1077272

WAGO

Component terminal block; double-deck; with end plate; with 1.5KE33C TVS diode; 24 VDC; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-944/281-589 280 Terminal Block, 24 V DC, 20 A, 28 to 14 AWG Wire, 4 Poles, DIN Rail Mounting

MFR: WAGO

MFR #: 280-944/281-589

Item #: 1299499

WAGO

Component terminal block; 3-conductor; LED (red); 24 VDC; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1321/1000-434 Operating Tool Component Terminal Block, 24 V, 0.025 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1321/1000-434

Item #: 1070589

WAGO

4-conductor through terminal block; 1 mm; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm; orange

2000-1402 2000 4 Conductor Terminal Block, 800 V, 17.5 A, 24 to 16 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 2000-1402

Item #: 1070400

WAGO

Double-deck terminal block; Through/through terminal block; with additional jumper position on lower level; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; blue/gray

280-524 280 Double Deck Terminal Block, 500 V, 20 A, 28 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 280-524

Item #: 1077410

WAGO

2-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm ; 1.5 mm; CAGE CLAMP; 1,50 mm; gray

260-301 260 2-Conductor Terminal Block, 400 V, 18 A, 28 to 16 AWG Wire, 1 Poles, Flange Mounting

MFR: WAGO

MFR #: 260-301

Item #: 1076184

WAGO

Component terminal block; 3-conductor; LED (red); 24 VDC; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1321/1000-413 Operating Tool Component Terminal Block, 24 V, 0.025 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1321/1000-413

Item #: 1070588

WAGO

Component terminal block; 4-conductor; with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm; CAGE CLAMP; 4,00 mm; gray

281-665/281-411 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 281-665/281-411

Item #: 1077727

WAGO

Component terminal block; double-deck; with suppressor diode; AC 115 V; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

870-523/281-594 Double-Deck Component Terminal Block, 115 V AC, 20 A, 28 to 14 AWG Wire, DIN Rail Mount

MFR: WAGO

MFR #: 870-523/281-594

Item #: 1084333

WAGO

Component terminal block; 4-conductor; with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray

280-623/281-411 Operating Tool Component Terminal Block, 250 V, 0.5 A, 28 to 14 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 280-623/281-411

Item #: 1024270

WAGO

3-conductor disconnect/test terminal block; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; blue

2002-1774 Operating Tool Test Terminal Block, 400 V, 16 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1774

Item #: 1070626

WAGO

3-conductor disconnect/test terminal block; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1771 Operating Tool Test Terminal Block, 400 V, 16 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-1771

Item #: 1016993

WAGO

2002-2602 Operating Tool Deck Terminal Block, 500 V, 24 A, 22 to 12 AWG Wire, 2 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-2602

Item #: 1070713

WAGO

1-conductor power distribution disconnect terminal block; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-7111 Operating Tool Disconnect Terminal Block, 250 V, 24 A, 22 to 12 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2002-7111

Item #: 1070868

WAGO

1-conductor N-disconnect terminal block; 16 mm; Push-in CAGE CLAMP; 16,00 mm; blue

2016-7114 Operating Tool Disconnect Terminal Block, 250 V, 72 A, 14 to 6 AWG Wire, 1 Poles, DIN Rail Mount

MFR: WAGO

MFR #: 2016-7114

Item #: 1071200

WAGO

4-conductor disconnect/test terminal block; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; Push-in CAGE CLAMP; 2,50 mm; gray

2002-1871 2002 4-Conductor Terminal Block, 1.29 in L x 0.20 in W x 3.44 in H, Polyamide

MFR: WAGO

MFR #: 2002-1871

Item #: 1016627

WAGO

2-conductor disconnect terminal block; with test option; orange disconnect link; for DIN-rail 35 x 15 and 35 x 7.5; 6 mm; CAGE CLAMP; 6,00 mm; blue

282-695 282 2-Conductor Fuse Terminal Block, 400 V, 30 A, 22 to 12 AWG Wire, DIN Rail Mounting

MFR: WAGO

MFR #: 282-695

Item #: 1077844

About Terminal Blocks

Terminal blocks are a critical component of electrical systems. Terminal blocks are used to secure and terminate single pole wires, connecting them to circuits or other parts of the system. Terminal blocks are available in a wide range of sizes and shapes depending on the application.