Skip to Main Content Skip to Footer Content

Main Content Starts Here

Fluke

Founded in 1948, Fluke is one of the world’s leading manufacturers of industrial electronic test tools, diagnostic equipment, thermal imaging devices, and metering equipment. Our instruments are well known for their accuracy, convenience, and durability.

Showing 577 - 624 of 767 Items

filter_alt Filters

Sort By

Per Page

Sort By

Per Page

Amprobe

Low Current Clamp On Ammeter, Amperage Rating: AC DC: 4 AMP, 40 AMP, Frequency Rating: 40 HZ - 400 HZ In AC, Measuring Range: 0 - 40 AMP DC Or AC Peak, Operating Temperature: 0 - 50 DEG C, Dimensions: 184 MM Length X 71 MM Width X 31 MM Height, Battery Type: 9 V, Alkaline PP3, NEDA 1604, Display: 4000 Count,10 MM High Characters, Maximum Jaw Opening: 19 MM Cable, Maximum Jaw Opening: 20 MM, Accuracy: Plus-Minus (1.3PCT + 5 Digits), Temperature coefficient: Plus-Minus 0.05PCT Of RDG-DEGC, Resolution: 1 MILAMP In 4 AMP Range, 10 MILAMP In 40 AMP Range, Autoranging: 4 AMP-40 AMP, CE Certified, CAT III 300V

LH41A Digital Low Current Clamp-On Ammeter, 4 to 40 A, 40 to 400 Hz, 0.78 in Jaw, LCD Display

MFR: Fluke

MFR #: LH41A

UPC: 095969416542

Item #: 783715

Amprobe

Amprobe Clamp Multimeter with leakage current capability measures low AC current in the microamps. Great for applications requiring measurement of leakage and fault currents.

AC50A AC Leakage Current Clamp-On Meter, 40 to 400 mA, 4 to 60 A, 400 V AC, 400 Ohm, 50/60 Hz, 40 Hz to 1 kHz, 1.2 in Jaw, 3-3/4 Digits LCD Display

MFR: Fluke

MFR #: AC50A

UPC: 095969416719

Item #: 764819

Amprobe

CLAMP-ON GROUND RESISTANCE TESTER

DGC-1000A Clamp-On Ground Resistance Tester, 10 A, Large Digital LCD Display, 9 V DC Battery

MFR: Fluke

MFR #: DGC-1000A

UPC: 095969366311

Item #: 194199

Amprobe

True-Rms Navigator Clamp Meter, Voltage Rating: AC DC: 100 V, 1000 V, Amperage Rating: 100 AMP, 600 AMP, Frequency Rating: 20 HZ - 10 KHZ, Resistance: 1 KOHM, 10 KOHM, 100 KOHM, Capacitance: 400 MFD, 4 MILFD, Accuracy: Plus-Minus (1.5 PCT RDG + 5 LSD) For AC current, Plus-Minus (1.5 PCT RDG + 5 LSD) For DC Current, Plus/Minus (1 PCT RDG + 5 LSD) For AC Voltage, Plus-Minus (0.7 PCT RDG + 2 LSD) For DC Voltage, Plus-Minus (1 PCT RDG + 3 LSD) For Resistance, Plus-Minus (0.5 PCT RDG + 3 LSD) For Frequency, Plus-Minus (1.9 PCT RDG + 8 LSD) For Capacitance, Display: Large 10,000 Count Display With Active Backlight And Analog, Temperature Rating: 0 - 10 DEG C, Battery: 9 V, Peak Hold: Yes, Diode Test: Yes, Dimensions: 238.3 MM Length X 87.3 MM Width X 51 Height, CE Certified, CAT IV 600 V , CAT III 1000 V Safety Standard, For professional Use

ACD-50NAV Navigator AC True RMS Clamp-On Power Meter, 100 to 600 A, 100 to 1000 V AC/DC, 1 to 100 kOhm, 20 Hz to 10 kHz, 45 mm Jaw, Large Backlit LCD Display

MFR: Fluke

MFR #: ACD-50NAV

UPC: 095969556637

Item #: 158794

Amprobe

MINI-CLAMP

AMP-25 AC/DC Mini-Clamp True RMS Clamp-On Meter, 60 to 300 A AC/DC, 1 in Jaw, Backlit LCD Display

MFR: Fluke

MFR #: AMP-25

UPC: 095969778787

Item #: 390952

Fluke

FLUKE 4 IN (100MM) INFRARED WINDOW WITH SECURITY KEY DOOR LATCH

FLUKE-CV401 ClirVu CV Series Infrared Window With Security Key Door Latch, 4 in Crystal Insert, 0.9 in THK Window

MFR: Fluke

MFR #: FLUKE-CV401

UPC: 095969670579

Item #: 730603

Fluke

FLUKE 3 IN (75MM) INFRARED WINDOW WITH SECURITY KEY DOOR LATCH

FLUKE-CV301 ClirVu CV Series Infrared Window With Security Key Door Latch, 3 in Crystal Insert, 0.64 in THK Window

MFR: Fluke

MFR #: FLUKE-CV301

UPC: 095969670562

Item #: 785285

Fluke

Reduce LCD screen glare and reflections in bright sunlight or other areas where ambient lighting conditions are bright with this durable, heavy-duty plastic accessory visor. It can be used inside or outside, and clips onto the thermal imager without the need for any additional hardware. It can be easily removed and stored when not in use.

FLK-TI-VISOR3 Camera Sun Visor, For Use With Ti400, Ti300, Ti200 Infrared Camera

MFR: Fluke

MFR #: FLK-TI-VISOR3

UPC: 095969668651

Item #: 787389

Fluke

No Image Available

FLK-LENS/25MAC2 Smart Macro Infrared Lens, For Use With TiX580, TiX560, TiX520, TiX500 Series Infrared Camera, 25 micron Minimum Spot Size, 03 to 0.6 in Working Distance, 36.1 deg H x 27.1 deg V Field of View, Germanium

MFR: Fluke

MFR #: FLK-LENS/25MAC2

UPC: 095969782258

Item #: 763592

Fluke

4X TELEPHOTO IR LENS FOR TiX560, TiX520, Ti400, Ti300, Ti200

FLK-LENS/4XTELE2 Smart Infrared Telephoto Lens, For Use With TiX560, TiX520, TiX500, Ti400, Ti300, Ti200 Series Infrared Camera, 4x Magnification, 5 ft Focus Distance, 6 deg H x 4.5 deg V Field of View, Germanium

MFR: Fluke

MFR #: FLK-LENS/4XTELE2

UPC: 095969782241

Item #: 488557

Fluke

The experts choice for building diagnostics. Is the basic electrical tester for residential electricians and HVAC technicians, who need a durable, reliable tool for testing voltage and continuity. It has all of the advantages of a traditional solenoid tester, with added functionality, but none of the typical drawbacks. With voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke, it is an excellent choice for most light residential, and HVAC applications. Combining the advantages of traditional solenoid testers with features designed for added user protection, ruggedness and reliability, Electrical Tester is suitable for use in most residential, industrial and commercial environments. The testers have a hazardous voltage warning light and are capable of detecting voltage even when the battery is dead. The testers GFCI trip capability, built-in flashlights, continuity beeper and extra heavy-duty test leads and probes (both replaceable).

T+ 3-Phase Electrical Voltage Detector, 600 V AC/DC, LED Indicator, CAT III 1000 V AC/CAT IV 600 V AC, Hard Plastic

MFR: Fluke

MFR #: T+

UPC: 095969327909

Item #: 12684

Fluke

Is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance. The probe is a precision 1000:1 voltage divider formed by two matched resistors. The unusually high input impedance offered by these resistors minimizes circuit loading and thereby, optimizes measurement accuracy.

80K-40 High Voltage Current Probe, 40 kV AC/DC, 28 VRMs, CAT I, 12.99 in L

MFR: Fluke

MFR #: 80K-40

UPC: 095969001120

Item #: 168134

Fluke

Insulation Tester Kit, Voltage Rating: 250, 500, 1000, 2500, 5000, 10000 V, Amperage Rating: Induced: 2 MILAMP, Frequency Response: 50/60 HZ, Resistance Range: 200 KOHM - 2 TOHM, Accuracy: 5 - 20 PCT For 250, 500, 1000, 2500, 5000, 10000 V, 0, - 10 PCT At 1 MILAMP Load Current For Insulation Test, Plus/Minus (5 PCT Plus 2 NAMP)For Leakage Current, Plus/Minus (15 PCT RDG Plus 0.03 MFD)For Capacitance, Display: 75 MM Height X 105 MM Width LCD, Interface Type: PC Port, Enclosure: IP40, Dimensions: 269 MM Length X 277 MM Width X 160 MM Height, Environmental Conditions: Operating Temperature: -20 To 50 DEG C, Storage Temperature: -20 To 65 DEG C, Humidity 80 PCT, Altitude 2000 MR, Includes: Test Cables With Alligator Clips (red, black, green), Infrared Adapter With Interface Cable, FlukeView Forms Basic CD-ROM, AC Power Cord, Soft Carrying Case (base models only), English Manual, Users Manual on CD-ROM, Quick Reference Card, Software License Agreement, Registration Card, FlukeView Forms Installation Guide, USB-IR Cable, Installation Guide, IP67 Hard Case, Certificate of Calibration, Heavy Duty Alligator Clip Leads, Fluke Connect IR to Wireless Connector, CSA, CE Certified, EN 61326, IEC 61010-1: Overvoltage category II, Pollution Degree 2, IEC 61010-2-030: Measurement 600V CAT IV / 1000V CAT IIIIEC 61557-1, IEC 61557-2, C/UL Listed, For Capturing And Trending anomalies for troubleshooting, commissioning and preventative maintenance of insulation resistance

FLUKE-1555/KIT Insulation Tester Kit, 5 Pieces

MFR: Fluke

MFR #: FLUKE-1555/KIT

UPC: 095969550970

Item #: 94925

Fluke

Pipe Clamp Temperature Probe Kit, Included: Soft Carrying Case, Temperature Range: -29 To 149 DEG C, For 0.25 - 2.5 IN Pipe Diameter, 80PK-8, 80PK-10

80PK-18 Temperature Probe Kit, -20 to 300 deg F, +/-3.4 deg F, 39 in

MFR: Fluke

MFR #: 80PK-18

UPC: 095969493826

Item #: 139702

Fluke

Thermocouple Adapter permits K-type thermocouples and temperature probes to be connected to the banana jack inputs of general purpose multi-meters that have built-in temperature measurement functions. It replaces the older model Fluke 80AK thermocouple adapter and provides the same form, fit and function as the older model

80AK-A Thermocouple Adapter, For Use With Multimeter with Temperature Function

MFR: Fluke

MFR #: 80AK-A

UPC: 095969370974

Item #: 95564

Fluke

AC Current Clamp With BNC Output, Amperage Rating: 40 AMP: 0.5 - 40 AMP, 400 AMP: 5 - 400 AMP, Voltage Rating: 1000 VAC, Frequency Rating: 45 - 400 HZ, Operating Temperature: 0 - 50 DEG C, Dimensions: 5.09 IN Length X 2-3/4 IN Width X 1.18 IN Height, 2.5 MR Output Cable Length, Accuracy: 40 AMP: 2 PCT Plus 0.015 AMP, 400 AMP: 2 PCT Plus 0.04 AMP, 5 - 10 KHZ Typical Bandwidth, 32 MM Maximum Conductor Size, CSA And CE Certified, CAT IV 600 V, CAT III 1000 V

I400S Clamp-On AC Current Probe, 1000 V AC, 1000 A, 0.5 to 400 A Measuring Range, 1.2 in Jaw

MFR: Fluke

MFR #: I400S

UPC: 095969268585

Item #: 199966

Fluke

FLUKE-289 True-RMS Industrial Data Logging Digital Multimeter

FLUKE-289 True-RMS Industrial Data Logging Digital Multimeter

MFR: Fluke

MFR #: FLUKE-289

UPC: 095969354103

Item #: 97901

Fluke

Where rugged meets reliable. The Fluke 365 is a new, innovative Fluke clamp meter, offering a thin, small jaw design that makes it easy to get around tightly packed wires. Be ready for anything. The Fluke 365 is a rugged meter perfect for jobs where access to wires is difficult. The 365s thin, small jaw is detachable with a flexible lead, which makes gaining access to wires and viewing the display easier than ever.

FLUKE-365 Detachable Jaw Clamp Meter, 200 A, 600 V AC/DC, 6000 Ohm, Backlit Display

MFR: Fluke

MFR #: FLUKE-365

UPC: 095969544788

Item #: 190663

Fluke

170 Series Extreme Case, Included: Automatic Purge Valve, Construction: Neoprene O-Ring, ABS Latches, Rugged Pelican Hard Case, For use with Air Quality: 922, Insulation Testers: 1503, 1507, 1577, 1587, Multimeters: 77 III, 77 IV, 114, 115, 116, 117, 177, 179, Process Tools: 712, 714, 715, 717, 718, 787, Temperature: 51, 51-2, 52, 52-2, 53, 53-2, 54, 54-2

CXT170 Rugged Pelican Extreme/Hard Carrying Case, 5 in L x 12-1/2 in W x 11 in D

MFR: Fluke

MFR #: CXT170

UPC: 095969472944

Item #: 83107

Fluke

1-rms Digital Multimeter designed for basic electrical tests. The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display thats easier to view, this meter is a must have for every toolbox.

FLUKE-113 VCHEK Utility Digital Multimeter, 600 V AC/DC, 60 kOhm Measuring, 6/60/600 V AC/DC, 600 Ohm/6/60 kOhm, Backlight/Digital Display

MFR: Fluke

MFR #: FLUKE-113

UPC: 095969434522

Item #: 178687

Fluke

568 Series Infrared And Contact Thermometer, Temperature Range: -40 To 800 DEG C, Accuracy: Less Than 0 DEG C (32 DEG F): Plus/Minus (1.0 DEG C (Plus/Minus 2 DEG F) Plus 0.1/1 DEG C or DEG F) Greater Than 0 DEG C (32 DEG F): Plus/Minus 1 PCT or Plus/Minus 1 DEG C (Plus/Minus 2 DEG F), whichever is greater, Resolution: 0.1 DEG C, Spectral Response: 8 - 14 MIC-MR, Laser Sighting: Single Point Laser Less Than 1 MILW Output Class 2 (II) Operation, 630 - 670 NMTR, Response Time: Less Than 500 MS, Emissivity: By Built-In Table Of Common Materials Or Digitally Adjustable From 0.10 To 1.00 By 0.01, Display: Dot Matrix 98 X 96 Pixels With Function Menus, Alarm: High/Low Audible And Two-Color Visual, Data Logging: Yes, Trigger: Lock Mechanism, Battery Type: (2) AA/LR6 And USB When Used With A PC, Laser And Backlight ON 12 HR Laser And Backlight Off 100 HR, Dimensions: 6.965 IN Height X 6.441 IN Length X 2.039 IN Width

FLUKE-568 Infrared and Contact Thermometer, -40 to 1472 deg F, +/- 1%, 1 in at 50 in Focus Spot, 0.1 to 1 u, AA Battery

MFR: Fluke

MFR #: FLUKE-568

UPC: 095969400374

Item #: 30452

Fluke

Milliamp process clamp meters can measure mA signals without breaking the loop. The Fluke 772 mA Clamp Meter expand upon the capabilities of the popular 771 mA Clamp Meter, adding loop power and mA sourcing to the troubleshooting and process calibration capabilities in all Fluke mA clamp meters. Need more hours in your day. Save time by NOT breaking the loop on 4-20 mA signal measurements. Are you spending time: Taking mA measurements by removing a wire and breaking the loop Calling the control room to isolate a loop Testing analog input/output on a console Troubleshooting devices with mA inputs and outputs Repairing intermittent or erratic 4-20 mA loops Going back to the shop to get extra tools. If you need more time in your busy day take a good look at the Fluke 772 mA Clamp Meters. Its designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

FLUKE-772 Milliamp mA Process Clamp Loop Meter

MFR: Fluke

MFR #: FLUKE-772

UPC: 095969475815

Item #: 136323

Fluke

Is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within

80K-15 Electronic High Voltage Air Cleaner Probe, 0 to 15 kV AC, IEC 1010-2-031:1993/Type B/40 kV DC/Peak AC/28 kV RMS/Overvoltage Category I

MFR: Fluke

MFR #: 80K-15

UPC: 095969063517

Item #: 184916

Fluke

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz.

VPS210-G Double Insulated Voltage Probe Set, For Use With Scope Meter 190 Series, 600/1000 V AC, Black/Gray

MFR: Fluke

MFR #: VPS210-G

UPC: 095969435789

Item #: 118328

Fluke

Electrical Tester Holster

H5 T5 Electrical Tester Holster With Lead Storage, Belt Loop, 192 mm L x 90 mm W x 38 mm D, Fabric

MFR: Fluke

MFR #: H5

UPC: 095969057196

Item #: 86955

Fluke

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 200 MHz and 2 channels. Includes C290 Hard-shell carrying case, SW90W FlukeView for ScopeMeter Test Tool and Windows Software.

FLUKE-190-202/AM/S Scope Meter 190 Series II Test Tool Oscilloscope, 200 MHz Bandwidth, Full Color LCD with Fast Update Rate Display, CAT III 1000 V AC/CAT IV 600 V AC

MFR: Fluke

MFR #: FLUKE-190-202/AM/S

UPC: 095969601658

Item #: 143793

Fluke

Lighten up your toolbox. The Fluke 561 IR and contact thermometer, combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both infrared and contact temperature, replacing several other test tools. Its fast, efficient, and easy to use, saving you valuable time and effort.

FLUKE-561 Infrared and Contact Thermometer, -40 to 1022 deg F Infrared, 32 to 212 deg F K-Type Thermocouple, 12:1 Focus Spot, Low/Med/High, AA Battery

MFR: Fluke

MFR #: FLUKE-561

UPC: 095969332538

Item #: 64714

Fluke

K-Type Bead Probe

80PK-1 Temperature Probe, -40 to 260 deg C, 24 in L Wire

MFR: Fluke

MFR #: 80PK-1

UPC: 095969009744

Item #: 68621

Fluke

Soft Carrying Case, Included: Elastic Accessory Strap And Mesh Accessory Retainer, Construction: Polyester 600D, For Carrying A Wide Range Of Fluke Handheld Test Tools And Accessories

C345 Soft Carrying Case, 9-1/2 in L x 8 in W x 14 in D, Polyester 600D

MFR: Fluke

MFR #: C345

UPC: 095969463645

Item #: 126657

Fluke

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 60 MHz and 2 channels. Includes C290 Hard-shell carrying case, SW90W FlukeView for ScopeMeter Test Tool and Windows Software.

FLUKE-190-062/AM/S Scope Meter 190 Series II Test Tool Oscilloscope, 60 MHz Bandwidth, Full Color LCD with Fast Update Rate Display, CAT III 1000 V AC/CAT IV 600 V AC

MFR: Fluke

MFR #: FLUKE-190-062/AM/S

UPC: 095969601368

Item #: 134612

Fluke

Laboratory accuracy. Wherever you go. The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05 percent + 0.3degrees Celsius) in a rugged, handheld test tool. A dual input thermomoeter, 60 Hz noise rejection.

FLUKE-52-2-60HZ Digital Thermometer, 210 to 1200 deg C J-Type, 200 to 1372 deg C K-Type, 250 to 400 deg C T-Type, 150 to 1000 deg C E-Type, 200 to 1300 deg C N-Type, 0 to 1767 deg C R and S-Type

MFR: Fluke

MFR #: FLUKE-52-2-60HZ

UPC: 095969071338

Item #: 176285

Fluke

Attach it to a hard hat, a baseball hat, or even a panel door for all the light you need.

L206 Deluxe Hat Light, LED/Xenon Bulb, Polymer Housing, 3 Bulbs

MFR: Fluke

MFR #: L206

UPC: 095969242615

Item #: 116766

Fluke

Type J Bead Probe, Temperature Range: -40 To 260 DEG C, Wire Length: 48 IN

80PJ-1 Type J Bead Probe Temperature Probe, 48

MFR: Fluke

MFR #: 80PJ-1

UPC: 095969078443

Item #: 160587

Fluke

The new Fluke 83-5 has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment.

FLUKE-83-5 Industrial Multimeter Electronic Measuring Probe, 600/1000 V AC, 10 A, 0.5%, 0.1% Accuracy

MFR: Fluke

MFR #: FLUKE-83-5

UPC: 095969245258

Item #: 200219

Fluke

Pipe Clamp Temperature Probe. Type K, extra large thermocouple clamps securely to larger pipes for fast temperature and superheat measurement.

80PK-10 Temperature Probe, -29 to 149 deg C

MFR: Fluke

MFR #: 80PK-10

UPC: 095969493260

Item #: 137464

Fluke

Is a rugged, molded plastic case designed to carry Fluke handheld digital multimeters and process calibrators and most accessories used for these meters.

C1600 Gear Tool Box, 10 in H x 6-7/8 in W x 13 in D

MFR: Fluke

MFR #: C1600

UPC: 095969240659

Item #: 65424

Fluke

For professional technicians worldwide there is one preferred solution: the precision, reliability and ease of use they find in Fluke 170 Series True RMS digital multimeters. This is the industry standard, with all the features you need to troubleshoot and repair so many problems in electrical and electronic systems. Fluke 170 Series digital multimeters give you True RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 and 179 provide higher 0.09 basic accuracy, a digital display with analog bar graph and backlight. And the Fluke 179 delivers temperature measurements.

FLUKE-175-ESFP Digital Multimeter, 1000 V AC/DC, 10 A, 50 MOhm Measuring, 1000 V AC/DC, 10 A, 50 MOhm, Digital Display

MFR: Fluke

MFR #: FLUKE-175-ESFP

UPC: 095969095181

Item #: 24632

Fluke

SureGrip Immersion Temperature Probe

80PK-22 Immersion Temperature Probe, -40 to 1090 deg C, 12 in L Wire

MFR: Fluke

MFR #: 80PK-22

UPC: 095969242684

Item #: 111962

Fluke

7.2V 3500 mA-hour rechargeable Ni-MH battery pack

BP7235 Battery Pack, Nickel-Metal Hydride, 7.2 V DC V Nominal, 3500 mAh Nominal

MFR: Fluke

MFR #: BP7235

UPC: 095969066297

Item #: 187207

Fluke

80 Series Extreme Case, Included: Automatic Purge Valve, Construction: Neoprene O-Ring, ABS Latches, Rugged Pelican Hard Case, For use with Multimeters: 27, 83 V, 85 V, 87 V, 187, 189, Process Tools: 724, 725, 726, 789

CXT80 Extreme Case, 5 in H x 12-1/2 in W x 11 in D, ABS Latch/Neoprene O-Ring, Black

MFR: Fluke

MFR #: CXT80

UPC: 095969472937

Item #: 156719

Fluke

Durable polyester soft carrying case. Includes tow padded pockets for protection of two test tools. Compatible with Fluke 20, 70, 11X, 87V, 170 Series digital multimerters and other similar format test tools.

C115 Soft Zipper Closure Carrying Case, 2 in L x 7 in W x 8.11 in D, Polyester 600D

MFR: Fluke

MFR #: C115

UPC: 095969400084

Item #: 140085

Fluke

Unprecedented measurement flexibility. Be ready for anything. The Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. 25 cm (10 in) size.

FLUKE-I2500-10 iFlex Current Probe, 600/1000 V AC, 2500 A, CAT III 1000 V AC, CAT IV 600 V AC, 10 in L

MFR: Fluke

MFR #: FLUKE-I2500-10

UPC: 095969559706

Item #: 100084

Fluke

Tool Bag

C550 Soft Zipper Closure Carrying Case, 12 in L x 8-1/2 in W x 16 in D, Steel/Polyester

MFR: Fluke

MFR #: C550

UPC: 095969080644

Item #: 145357

Fluke

Use the Fluke Data Logging Software to manage your instruments and calibration data. This easy-to-use software enables you to perform real time data logging with the 700G Series guages.

700G/TRACK 700G Track Logging Software With Data Logging Cable, Title: Data Logging Software and Cable, Operating System Compatibility: Microsoft Windows 2000 (SP4), XP (SP2), Vista, Windows 7

MFR: Fluke

MFR #: 700G/TRACK

UPC: 095969617949

Item #: 198809

Fluke

Durable vinyl exterior zippered carrying case. Has belt look and an inner pocket to store test leads or small accessories. Compatible with Fluke 61 & 65 Infrared Thermometers and Fluke 320 series Clamp Meters

C23 Soft Carrying Case, 2 in H x 4 in W x 8 in D, Vinyl, Black

MFR: Fluke

MFR #: C23

UPC: 095969130073

Item #: 97364

Fluke

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz.

VPS210-R Double Insulated Voltage Probe Set, For Use With Scope Meter 190 Series, 600/1000 V AC, Black/Red

MFR: Fluke

MFR #: VPS210-R

UPC: 095969435772

Item #: 117668

Fluke

TP 38 Slim Reach Test Probe Set

TP38 Slim Reach Insulated Test Probe Set, 600/1000 V AC, 10 A, CAT II 1000 V/CAT III 600 V, 8.9 in L

MFR: Fluke

MFR #: TP38

UPC: 095969078771

Item #: 134421

Fluke

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 200 MHz and 2 channels.

FLUKE-190-202/AM Scope Meter 190 Series II Test Tool Oscilloscope, 200 MHz Bandwidth, Full Color LCD with Fast Update Rate Display, CAT III 1000 V AC/CAT IV 600 V AC

MFR: Fluke

MFR #: FLUKE-190-202/AM

UPC: 095969601573

Item #: 143149