Skip to Main Content Skip to Footer Content

Main Content Starts Here

Bolts

filter_alt Filters

Showing 49 - 96 of 291 Items

Sort By

Per Page

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 2-1/2 in. length, 3/8 in. diameter, Full thread, 9/16 in. head size

MB38212 Fully Threaded Tap Bolt, 3/8-16, 2-1/2 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB38212

UPC: 781002588122

Item #: 112465

LH DOTTIE

Mushroom Head with Spring Wing, Steel material, Zinc Plated Finish, 2 in. length, 3/16 in. diameter, 1/2 in. drill size, Square/Slotted drive type

TB362DS Toggle Bolt With Spring Wing Nut, 3/16 in Screw, 2 in OAL, Steel, Mushroom Head, 1/2 in Drill

MFR: LH Dottie

MFR #: TB362DS

UPC: 781002167921

Item #: 501132

LH DOTTIE

Cap Screw, Grade 5 Steel material, Zinc Plated Finish, Hex head type, 1-1/2 in. length, 1/4-20 in. thread size, 7/16 in. head width

5MB14112 Partial Thread Cap Screw, 1/4-20, 1-1/2 in L Under Head, 5 Grade, Steel, Zinc Plated

MFR: LH Dottie

MFR #: 5MB14112

UPC: 781002180043

Item #: 34004

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 1 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MB121 Fully Threaded Tap Bolt, 1/2-13, 1 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB121

UPC: 781002588528

Item #: 123098

LH DOTTIE

Eye Bolt, Low Carbon Cold Drawn Steel material, Zinc Plated Finish, 2-1/2 in. length, 3/8 in. diameter, NC Rolled Machine thread, 1 nut, Hex nut type, 7/8 in. thread length, 1 in. shank length, 3/8 in. thread size, 3/4 in. inside diameter

EB9 Eye Bolt With Hex Nut, 3/8 in, 1 in L Shank, Low Carbon Cold Drawn Steel, Zinc Plated

MFR: LH Dottie

MFR #: EB9

UPC: 781002282655

Item #: 60976

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 1-1/4 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MB12114 Fully Threaded Tap Bolt, 1/2-13, 1-1/4 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB12114

UPC: 781002588542

Item #: 22300

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 3/4 in. length, 5/16 in. diameter, Full thread, 1/2 in. head size

MB51634 Fully Threaded Tap Bolt, 5/16-18, 3/4 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB51634

UPC: 781002587521

Item #: 188737

LH DOTTIE

Cap Screw, Grade 5 Steel material, Zinc Plated Finish, Hex head type, 2 in. length, 1/4-20 in. thread size, 7/16 in. head width

5MB142 Partial Thread Cap Screw, 1/4-20, 2 in L Under Head, 5 Grade, Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: 5MB142

UPC: 781002180050

Item #: 27520

LH DOTTIE

Mushroom Head with Spring Wing, Steel material, Zinc Plated Finish, 4 in. length, 1/8 in. diameter, 3/8 in. drill size, Slotted/Phillips drive type

TBC84 Toggle Bolt With Spring Wing Nut, 1/8 in Screw, 4 in OAL, Steel, Mushroom Head, 3/8 in Drill

MFR: LH Dottie

MFR #: TBC84

UPC: 781002168478

Item #: 120874

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 3 in. length, 3/8 in. diameter, Full thread, 9/16 in. head size

MB383 Fully Threaded Tap Bolt, 3/8-16, 3 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB383

UPC: 781002588146

Item #: 113125

LH DOTTIE

Cap Screw, 18-8 Stainless Steel material, Hex head type, 1-1/2 in. length, 1/4 x 1-1/2 in. Size, 1/4-20 in. thread size, 7/16 in. head width

MBS14112 Corrosion-Resistant Partial Thread Cap Screw, 1/4-20, 1-1/2 in L Under Head, 18-8 Grade, Stainless Steel

MFR: LH Dottie

MFR #: MBS14112

UPC: 781002697121

Item #: 120859

LH DOTTIE

Cap Screw, 18-8 Stainless Steel material, Hex head type, 1-1/2 in. length, 3/8 x 1-1/2 in. Size, 3/8-16 in. thread size, 9/16 in. head width

MBS38112 Corrosion-Resistant Partial Thread Cap Screw, 3/8-16, 1-1/2 in L Under Head, 18-8 Grade, Stainless Steel

MFR: LH Dottie

MFR #: MBS38112

UPC: 781002698128

Item #: 71539

LH DOTTIE

Cap Screw, 18-8 Stainless Steel material, Hex head type, 1-1/4 in. length, 3/8 x 1-1/4 in. Size, 3/8-16 in. thread size, 9/16 in. head width

MBS38114 Corrosion-Resistant Partial Thread Cap Screw, 3/8-16, 1-1/4 in L Under Head, 18-8 Grade, Stainless Steel

MFR: LH Dottie

MFR #: MBS38114

UPC: 781002698104

Item #: 117987

LH DOTTIE

Cap Screw, Grade 5 Steel material, Zinc Plated Finish, Hex head type, 2-1/2 in. length, 3/8-16 in. thread size, 9/16 in. head width

5MB38212 Partial Thread Cap Screw, 3/8-16, 2-1/2 in L Under Head, 5 Grade, Steel, Zinc Plated

MFR: LH Dottie

MFR #: 5MB38212

UPC: 781002180340

Item #: 178757

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 3/4 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MB1234 Fully Threaded Tap Bolt, 1/2-13, 3/4 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB1234

UPC: 781002588504

Item #: 52465

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 2 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MB122 Fully Threaded Tap Bolt, 1/2-13, 2 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB122

UPC: 781002588580

Item #: 24855

Rittal Corp

Eyebolts, for TS, SE

4568000 Circular Transportation Eyebolt, Sheet Steel

MFR: Rittal

MFR #: 4568000

UPC: 639889185258

Item #: 108802

LH DOTTIE

Cap Screw, Grade 5 Steel material, Zinc Plated Finish, Hex head type, 1/2 in. length, 3/8-16 in. thread size, 9/16 in. head width

5MB3812 Partial Thread Cap Screw, 3/8-16, 1/2 in L Under Head, 5 Grade, Steel, Zinc Plated

MFR: LH Dottie

MFR #: 5MB3812

UPC: 781002180289

Item #: 876073

LH DOTTIE

Mushroom Head with Spring Wing, Steel material, Zinc Plated Finish, 2 in. length, 1/4 in. diameter, 5/8 in. drill size, Slotted/Phillips drive type

TBC42 Toggle Bolt With Spring Wing Nut, 1/4-20 Screw, 2 in OAL, Steel, Mushroom Head, 5/8 in Drill

MFR: LH Dottie

MFR #: TBC42

UPC: 781002168591

Item #: 18657

LH DOTTIE

Eye Bolt, Low Carbon Cold Drawn Steel material, Zinc Plated Finish, 3-11/16 in. length, 3/16 in. diameter, NC Rolled Machine thread, 1 nut, Hex nut type, 1-1/2 in. thread length, 3 in. shank length, 3/16 in. thread size, 3/8 in. inside diameter

EB3 Eye Bolt With Hex Nut, 3/16 in, 3 in L Shank, Low Carbon Cold Drawn Steel, Zinc Plated

MFR: LH Dottie

MFR #: EB3

UPC: 781002282358

Item #: 298338

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 2-1/4 in. length, 5/8 in. diameter, Full thread, 15/16 in. head size

MB58214 Machine Tap Bolt, 5/8-11, 2-1/4 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB58214

UPC: 781002589051

Item #: 1252795

LH DOTTIE

Eye Bolt, Low Carbon Cold Drawn Steel material, Zinc Plated Finish, 4 in. length, 1/4 in. diameter, NC Rolled Machine thread, 1 nut, Hex nut type, 1-1/2 in. thread length, 3 in. shank length, 1/4 in. thread size, 1/2 in. inside diameter

EB6 Eye Bolt With Hex Nut, 1/4 in, 3 in L Shank, Low Carbon Cold Drawn Steel, Zinc Plated

MFR: LH Dottie

MFR #: EB6

UPC: 781002282501

Item #: 136553

LH DOTTIE

Cap Screw, Grade 5 Steel material, Zinc Plated Finish, Hex head type, 3-1/2 in. length, 1/2-13 in. thread size, 3/4 in. head width

5MB12312 Partial Thread Cap Screw, 1/2-13, 3-1/2 in L Under Head, 5 Grade, Steel, Zinc Plated

MFR: LH Dottie

MFR #: 5MB12312

UPC: 781002180494

Item #: 541909

LH DOTTIE

Cap Screw, 18-8 Stainless Steel material, Hex head type, 2 in. length, 1/2 x 2 in. Size, 1/2-13 in. thread size, 3/4 in. head width

MBS122 Corrosion-Resistant Partial Thread Cap Screw, 1/2-13, 2 in L Under Head, 18-8 Grade, Stainless Steel

MFR: LH Dottie

MFR #: MBS122

UPC: 781002698524

Item #: 118620

LH DOTTIE

Hex Head Tap Bolt, Silicon Bronze material, 2 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MBBZ122 Fully Threaded Tap Bolt, 1/2-13, 2 in L Under Head, Silicone Bronze

MFR: LH Dottie

MFR #: MBBZ122

UPC: 781002583301

Item #: 91407

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 1/2 in. length, 5/16 in. diameter, Full thread, 1/2 in. head size

MB51612 Fully Threaded Tap Bolt, 5/16-18, 1/2 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB51612

UPC: 781002587507

Item #: 134459

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 1 in. length, 5/16 in. diameter, Full thread, 1/2 in. head size

MB5161 Fully Threaded Tap Bolt, 5/16-18, 1 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB5161

UPC: 781002587545

Item #: 70875

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 4 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MB124 Fully Threaded Tap Bolt, 1/2-13, 4 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB124

UPC: 781002588665

Item #: 115307

LH DOTTIE

Hex Head Tap Bolt, Silicon Bronze material, 1-1/4 in. length, 1/4 in. diameter, Full thread, 7/16 in. head size

MBBZ14114 Tap Bolt, 1/4-20, 1-1/4 in L Under Head, Silicon Bronze

MFR: LH Dottie

MFR #: MBBZ14114

UPC: 781002583035

Item #: 139980

LH DOTTIE

Hex Head Tap Bolt, Silicon Bronze material, 1-1/4 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MBBZ12114 Fully Threaded Tap Bolt, 1/2-13, Silicon Bronze

MFR: LH Dottie

MFR #: MBBZ12114

UPC: 781002583288

Item #: 433446

LH DOTTIE

Mushroom Head with Spring Wing, Steel material, Zinc Plated Finish, 2 in. length, 3/16 in. diameter, 1/2 in. drill size, Slotted/Phillips drive type

TBC362 Toggle Bolt With Spring Wing Nut, 3/16-24 Screw, 2 in OAL, Steel, Mushroom Head, 1/2 in Drill

MFR: LH Dottie

MFR #: TBC362

UPC: 781002168492

Item #: 152860

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 1-1/2 in. length, 3/4 in. diameter, Full thread, 1-1/8 in. head size

MB34112 Machine Tap Bolt, 3/4-10, 1-1/2 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB34112

UPC: 781002589501

Item #: 534996

LH DOTTIE

No Image Available

MBS382 Corrosion-Resistant Partial Thread Cap Screw, 3/8-16, 2 in L Under Head, 18-8 Grade, Stainless Steel

MFR: LH Dottie

MFR #: MBS382

UPC: 781002698142

Item #: 84487

LH DOTTIE

Cap Screw, 18-8 Stainless Steel material, Hex head type, 2 in. length, 1/4 x 2 in. Size, 1/4-20 in. thread size, 7/16 in. head width

MBS142 Corrosion-Resistant Partial Thread Cap Screw, 1/4-20, 2 in L Under Head, 18-8 Grade, Stainless Steel

MFR: LH Dottie

MFR #: MBS142

UPC: 781002697145

Item #: 112987

Milbank

Anchor Bolt Kit

Anchor Bolt Kit

MFR: Milbank

MFR #: CP-ABK5/8

UPC: 784572164901

Item #: 1427495

Kindorf

U Bolt, Size 1/2 Inch, Diameter 15/16 Inch, Length 2-3/4 Inches, Thread Length 1-3/4 Inch, Thread Size 5/16 - 18 Inch, Material Steel

H-286-1/2 Kindorf Right Handed Thread U-Bolt, 5/16-18, GoldGalv, Steel

MFR: ABB - Installation Products

MFR #: H 286 1/2

UPC: 785991792058

Item #: 187548

LH DOTTIE

Eye Bolt, Low Carbon Cold Drawn Steel material, Zinc Plated Finish, 5 in. length, 3/8 in. diameter, NC Rolled Machine thread, 1 nut, Hex nut type, 2 in. thread length, 3-1/2 in. shank length, 3/8 in. thread size, 3/4 in. inside diameter

EB11 Eye Bolt With Hex Nut, 3/8 in, 3-1/2 in L Shank, Low Carbon Cold Drawn Steel, Zinc Plated

MFR: LH Dottie

MFR #: EB11

UPC: 781002282754

Item #: 232141

LH DOTTIE

No Image Available

TBC386 Bolt, 3/8 in Screw, 6 in OAL, Carbon Steel, Mushroom Head

MFR: LH Dottie

MFR #: TBC386

UPC: 781002858195

Item #: 1567314

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 3 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MB123 Fully Threaded Tap Bolt, 1/2-13, 3 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB123

UPC: 781002588627

Item #: 1426

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 2-1/2 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MB12212 Fully Threaded Tap Bolt, 1/2-13, 2-1/2 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB12212

UPC: 781002588603

Item #: 670

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 1-1/4 in. length, 5/16 in. diameter, Full thread, 1/2 in. head size

MB516114 Fully Threaded Tap Bolt, 5/16-18, 1-1/4 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB516114

UPC: 781002587569

Item #: 111132

LH DOTTIE

Cap Screw, 18-8 Stainless Steel material, Hex head type, 1 in. length, 1/4 x 1 in. Size, 1/4-20 in. thread size, 7/16 in. head width

MBS141 Corrosion-Resistant Partial Thread Cap Screw, 1/4-20, 1 in L Under Head, 18-8 Grade, Stainless Steel

MFR: LH Dottie

MFR #: MBS141

UPC: 781002697084

Item #: 64041

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 1-1/2 in. length, 5/16 in. diameter, Full thread, 1/2 in. head size

MB516112 Fully Threaded Tap Bolt, 5/16-18, 1-1/2 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB516112

UPC: 781002587583

Item #: 460425

LH DOTTIE

Cap Screw, 18-8 Stainless Steel material, Hex head type, 1-1/4 in. length, 1/4 x 1-1/4 in. Size, 1/4-20 in. thread size, 7/16 in. head width

MBS14114 Corrosion-Resistant Partial Thread Cap Screw, 1/4-20, 1-1/4 in L Under Head, 18-8 Grade, Stainless Steel

MFR: LH Dottie

MFR #: MBS14114

UPC: 781002697107

Item #: 146854

LH DOTTIE

Mushroom Head with Spring Wing, Steel material, Zinc Plated Finish, 3 in. length, 1/8 in. diameter, 3/8 in. drill size, Square/Slotted drive type

TB83DS Toggle Bolt With Spring Wing Nut, 1/8 in Screw, 3 in OAL, Steel, Mushroom Head, 3/8 in Drill

MFR: LH Dottie

MFR #: TB83DS

UPC: 781002153979

Item #: 190646

LH DOTTIE

Mushroom Head with Spring Wing, Steel material, Zinc Plated Finish, 4 in. length, 1/2 x 4 in. Size, 1/2 in. diameter, 1-1/4 in. drill size, Slotted drive type

TB124 Slotted Toggle Bolt With Spring Wing, 1/2 in Screw, 4 in OAL, Steel, Mushroom Head, 1-1/4 in Drill

MFR: LH Dottie

MFR #: TB124

UPC: 781002168355

Item #: 95511

LH DOTTIE

Bottom Mount Rod Hanger, Steel material, 1 nut, 0.188 to 0.5 in. self drilling range, #5 point style

SSM12BR Bottom Mount Threaded Rod Hanger With Nut, 1/2 in Dia, Steel

MFR: LH Dottie

MFR #: SSM12BR

UPC: 781002175971

Item #: 175387

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 2-1/2 in. length, 1/4 in. diameter, Full thread, 7/16 in. head size

MB14212 Fully Threaded Tap Bolt, 1/4-20, 2-1/2 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB14212

UPC: 781002587125

Item #: 64772