Features

• Rugged, corrosion resistant, cast copper-free aluminum construction
• Accepts compatible Arktite® plug of same rating and configuration
• Mechanical interlock mechanism for dead front construction
• Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short circuit protection and thermal time delay overload protection
• A spring door receptacle, located at the bottom of the unit, is mechanically interlocked with the circuit breaker operating mechanism for safe and dependable operation
• Plug and receptacle contacts cannot be made or broken under load
• Operating handles can be padlocked in either ON or OFF positions
• Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
• Total compliance to the wiring and room requirements of the National Electrical Code®
• Semi-clamshell enclosure design, with an external machined flat joint flame path between body and cover makes interior components easily accessible
• Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
• Copper-free aluminum hinges allow the cover to swing well out of the way
• Stainless steel, quick release, captive, hex head cover bolts, stainless steel springs provide clear indication cover bolts are fully retracted from body
• Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturer's breakers
• Copper-free aluminum body, cover and receptacle, fiberglass reinforced polyester contact insulator material, copper-free aluminum operating handle material
• Stainless steel operating shaft and bushing
• 1-1/2 in hub, natural copper-free aluminum, brass and stainless steel, natural (red) fiberglass reinforced polyester, electro tin plated leaded red brass
• EBBR interlocked receptacles with circuit breakers are used as a service outlet for portable equipment indoors or outdoors in damp, wet, corrosive locations, without the need for a protective shelter
• In areas which are hazardous due to flammable vapors, gases or combustible dust, refineries, chemical plants and other processing and handling facilities of a hazardous nature
• In areas where frequent wash downs are necessary or where heavy rain or water spray is prevalent