Skip to Main Content Skip to Footer Content

How are we doing? Share feedback about your online experience with us. Take Survey ↗

Main Content Starts Here

L.H. Dottie

L.H. Dottie is a leading supplier of electrical, plumbing/irrigation, HVAC, security/low voltage, industrial, and energy products. Family owned and operated since 1965, we’ve grown from one warehouse in Lose Angeles to locations across North America thanks to our industry-leading products, uncompromising standards, and exceptional customer support.

Showing 769 - 816 of 2159 Items

filter_alt Filters

Sort By

Per Page

Sort By

Per Page

LH DOTTIE

Knockout Seal, 3-1/2 in. Size, Steel material, Snap In mounting, Zinc Plated Finish

D90S 5450 3-Piece Knockout Seal, 3-1/2 in Nominal Size, Snap-In Mount, Steel

MFR: LH Dottie

MFR #: D90S

UPC: 781002102564

Item #: 119258

LH DOTTIE

No Image Available

1001 High Strength Bare Grounding Clamp, 10 to 2 AWG Conductor, Bronze

MFR: LH Dottie

MFR #: 1001

UPC: 781002100270

Item #: 40934

LH DOTTIE

Two Hole Strap, Steel material, Zinc Plated Finish, Surface mounting, 1 in. Size, 22 GA thickness

TW303 2-Hole Conduit Strap, 1 in, For Use With EMT Conduit, Steel, Zinc Plated

MFR: LH Dottie

MFR #: TW303

UPC: 781002273103

Item #: 14091

LH DOTTIE

Eye Bolt, Low Carbon Cold Drawn Steel material, Zinc Plated Finish, 2-1/2 in. length, 3/8 in. diameter, NC Rolled Machine thread, 1 nut, Hex nut type, 7/8 in. thread length, 1 in. shank length, 3/8 in. thread size, 3/4 in. inside diameter

EB9 Eye Bolt With Hex Nut, 3/8 in, 1 in L Shank, Low Carbon Cold Drawn Steel, Zinc Plated

MFR: LH Dottie

MFR #: EB9

UPC: 781002282655

Item #: 60976

LH DOTTIE

Full Thread Wedge Anchor, 1/2 x 3-3/4 in. Size, 1/2 in. diameter, 3-3/4 in. length, 1/2-13 in. thread size, 2-3/8 in. thread length, 13 thread per inch, 1/2 in. drill size, Steel material, Zinc Plated Finish, 3/8 x 3 in. bolt size

W12334 Fully Threaded Wedge Anchor, 1/2 in Dia, 3-3/4 in OAL, 2-3/8 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W12334

UPC: 781002593133

Item #: 117227

LH DOTTIE

Hex Head Tap Bolt, Low Carbon Steel material, Zinc Plated Finish, 2 grade, 1-1/4 in. length, 1/2 in. diameter, Full thread, 3/4 in. head size

MB12114 Fully Threaded Tap Bolt, 1/2-13, 1-1/4 in L Under Head, 2 Grade, Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: MB12114

UPC: 781002588542

Item #: 22300

LH DOTTIE

Hexagonal Nut Sleeve Anchor, 3/8 x 1-7/8 in. Size, 3/8 in. diameter, 2-3/16 in. length, 1-1/8 in. minimum embedment depth, 3/8 in. drill size, Steel material, Zinc Plated Finish

SA38178 Sleeve Anchor, 3/8 in Dia, Steel, Hex Head

MFR: LH Dottie

MFR #: SA38178

UPC: 781002593386

Item #: 144161

LH DOTTIE

Zamac Anchor, 3/16 in. diameter, 7/8 in. length, 3/16 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material

ZA78 Anchor With Pin, 3/16 in Dia, 7/8 in OAL, Zamak Alloy Body Shell, Carbon Steel Pin, Flat Head

MFR: LH Dottie

MFR #: ZA78

UPC: 781002593508

Item #: 2678

LH DOTTIE

Sheet Metal Screw, Steel material, 1-1/2 in. length, #8 thread size, Pan head type, Zinc Plated Finish, Square drive type, #2 drill point size

DDSMS8112 Sheet Metal Screw, #8, 1-1/2 in OAL, Pan Head, Square Drive, Steel, Zinc Plated

MFR: LH Dottie

MFR #: DDSMS8112

UPC: 781002169734

Item #: 147161

LH DOTTIE

Pan Head Self Drilling Screw, Steel material, #8 x 1 in. Size, Zinc Plated Finish, Square drive type, #2 bit size, Patented Invincibox Packaging

TEKDD81 Self-Drilling Screw, #8, 1 in OAL, Pan Head, Square Drive, Steel, Zinc Plated

MFR: LH Dottie

MFR #: TEKDD81

UPC: 781002595045

Item #: 62120

LH DOTTIE

#12 x 1-1/2'' Tek 5 Hex Washer Head Self Drilling Screw

5TEKHW12112 Screw, #12, 1-1/4 in OAL, Washer Head, Hex Drive, Carbon Steel, Zinc-Coated

MFR: LH Dottie

MFR #: 5TEKHW12112

UPC: 781002842262

Item #: 1306215

LH DOTTIE

Machine Screw, Steel material, 1 in. length, #10-24 thread size, Round head type, Zinc Plated Finish, Slotted/Phillips drive type

RMC10241 Combination Machine Screw, #10-24, 1 in OAL, Steel, Round Head, Zinc Plated, Phillips/Slotted Drive

MFR: LH Dottie

MFR #: RMC10241

UPC: 781002558644

Item #: 16072

LH DOTTIE

Sheet Metal Screw, Steel material, 1/2 in. length, #10 thread size, 5/16 in. head width, Hex Washer head type, Zinc Plated Finish, Slotted/Phillips drive type

HWSMS1012 Sheet Metal Screw With Washer, #10, 1/2 in OAL, Hex Washer Head, Phillips/Slotted Drive, Steel, Zinc Plated

MFR: LH Dottie

MFR #: HWSMS1012

UPC: 781002566007

Item #: 111567

LH DOTTIE

Assorted Nylon Walldriller Plus Anchor Kit with Pan Head Phillips Drive Screws

Assorted Nylon Walldriller Plus Anchor Kit with Pan Head Phillips Drive Screws

MFR: LH Dottie

MFR #: WDPAK

UPC: 781002858164

Item #: 1375356

LH DOTTIE

Reducing Flat Washer, Steel material, Zinc Plated Finish, 1-1/2 in. outside diameter, 1/2 in. inside diameter

RW51 Flat Reducing Washer, 1/2 x 1-1/2 in, Steel, Zinc Plated

MFR: LH Dottie

MFR #: RW51

UPC: 781002301219

Item #: 3301

LH DOTTIE

Washer Head Self Drilling Screw, Steel material, #12 x 1-1/2 in. Size, Hex Washer head type, Zinc Plated Finish, 5/16 in. hex size

TEKHW12112 Self-Drilling Screw With Washer, #12, 1-1/2 in OAL, Hex Washer Head, Steel, Zinc Plated

MFR: LH Dottie

MFR #: TEKHW12112

UPC: 781002175605

Item #: 184224

LH DOTTIE

Zamac Anchor, 1/4 in. diameter, 1-1/2 in. length, 1/4 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material

ZA150 Anchor With Pin, 1/4 in Dia, 1-1/2 in OAL, Zamak Alloy Body Shell, Carbon Steel Pin, Flat Head

MFR: LH Dottie

MFR #: ZA150

UPC: 781002593560

Item #: 135753

LH DOTTIE

Sheet Metal Screw, Steel material, 1/2 in. length, #8 thread size, Pan head type, Zinc Plated Finish, Square drive type, #2 drill point size

DDSMS812 Sheet Metal Screw, #8, 1/2 in OAL, Pan Head, Square Drive, Steel, Zinc Plated

MFR: LH Dottie

MFR #: DDSMS812

UPC: 781002169659

Item #: 102317

LH DOTTIE

Nail Strap, Steel material, Zinc Plated Finish, Stud mounting, 12 GA thickness, 3/4 in. strap size, EMT

D12 J-Hook Nail Strap, 3/4 in, Hammer-On Mount, 12 ga Steel

MFR: LH Dottie

MFR #: D12

UPC: 781002276753

Item #: 116591

LH DOTTIE

Hex Head Concrete Anchor System, 1/4 in. diameter, 3-1/4 in. length, Hi-Low thread type, 3/16 x 5-1/2 in. drill size, Ceramic Coated Blue finish, Drill included, 5/16 in. bit size, Slotted drive type

14H314 Concrete Anchor System, 5/16 in Dia, 3-1/4 in OAL, Ceramic Blue Coated

MFR: LH Dottie

MFR #: 14H314

UPC: 781002255284

Item #: 92499

LH DOTTIE

Insert Bit, #2 tip size, Square tip type, 1 in. overall length, 2 pieces, #8-10 screw size

IB2C 2-Piece Carded Insert Bit, #2 Point, 1 in OAL, Steel

MFR: LH Dottie

MFR #: IB2C

UPC: 781002818748

Item #: 45403

LH DOTTIE

Color Coding Tape, Polyvinyl Chloride material, Yellow, 60 ft. length, 3/4 in. width, 30 N/CM tensile strength, 7 mil. thickness, Steel-1.5, Backing-0.15 N/CM adhesion strength, 600 V voltage rating

360YEL Color Coding Economy Industrial Electrical Tape, 60 ft L x 3/4 in W, 7 mil THK, PVC, Rubber Adhesive, Yellow

MFR: LH Dottie

MFR #: 360YEL

UPC: 781002847625

Item #: 209935

LH DOTTIE

Color Coding Tape, Polyvinyl Chloride material, Orange, 60 ft. length, 3/4 in. width, 30 N/CM tensile strength, 7 mil. thickness, Steel-1.5, Backing-0.15 N/CM adhesion strength, 600 V voltage rating

360ORG Color Coding Economy Industrial Electrical Tape, 60 ft L x 3/4 in W, 7 mil THK, PVC, Rubber Adhesive, Orange

MFR: LH Dottie

MFR #: 360ORG

UPC: 781002847595

Item #: 209826

LH DOTTIE

Color Coding Tape, Polyvinyl Chloride material, Brown, 60 ft. length, 3/4 in. width, 30 N/CM tensile strength, 7 mil. thickness, Steel-1.5, Backing-0.15 N/CM adhesion strength, 600 V voltage rating

360BRN Color Coding Economy Industrial Electrical Tape, 60 ft L x 3/4 in W, 7 mil THK, PVC, Rubber Adhesive, Brown

MFR: LH Dottie

MFR #: 360BRN

UPC: 781002847564

Item #: 209558

LH DOTTIE

Rotary Hammer Drill Bit, 1/4 in. bit diameter, 4-1/2 in. overall length, Straight shank type, 3 flutes, Tip-Carbide material, 2 in. drilling depth

SDS14412 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus Shank, 2 in D Cutting, 4-1/2 in OAL

MFR: LH Dottie

MFR #: SDS14412

UPC: 781002122081

Item #: 119885

LH DOTTIE

Pilot Drill, 1/4 in. bit diameter, 4-/12 in. overall length, 3 flutes, Shank Ground 3 Sides

VPD4 Pilot Drill Bit, 1/4 in Dia Round Shank, 1/4 in Pilot Drill, Steel

MFR: LH Dottie

MFR #: VPD4

UPC: 781002285403

Item #: 17937

LH DOTTIE

Masonry Drill, 1/2 in. bit diameter, 4 in. overall length, 1/4 in. shank size, Straight shank type, Tip-Tungsten Carbide material

MD6 Masonry Drill Bit, 1/2 in Dia, 4 in OAL, Tungsten Carbide Tipped, Black Oxide

MFR: LH Dottie

MFR #: MD6

UPC: 781002302308

Item #: 135997

LH DOTTIE

Rotary Hammer Drill Bit, 1/4 in. bit diameter, 8-1/4 in. overall length, Straight shank type, 3 flutes, Tip-Carbide material, 6 in. drilling depth

SDS14814 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus Shank, 6 in D Cutting, Tungsten Carbide Cutting Edge, 8-1/4 in OAL

MFR: LH Dottie

MFR #: SDS14814

UPC: 781002122104

Item #: 184391

LH DOTTIE

Replacement Bit, #8-32 Size, 135 DEG Split point type, M2 High Speed Steel material

DT832NC 135 deg Hex Split Point Replacement Bit, 1 Pieces, #8-32 Tap Thread, UNC Thread

MFR: LH Dottie

MFR #: DT832NC

UPC: 781002128816

Item #: 144007

LH DOTTIE

Rust Proof Paint, Solvent base type, Safety Blue, 15 min. dry time, Aerosol Can, 12 oz. net weight, 16 oz. Size

303 Rustproof Solvent Based Spray Paint, 16 oz Container, Liquid Form, Safety Blue, 11 sq-ft Coverage, 72 hr Curing

MFR: LH Dottie

MFR #: 303

UPC: 088193003039

Item #: 79629

LH DOTTIE

High Speed Drill, M2 grade, Steel material, Black/Gold finish, Split Point Type, 135 DEG Split drill point, 1/2 in. fractional size, 6 in. overall length, 3/16 in. shank diameter, Carded1 piece

HS32C 1-Piece Heavy Duty Jobber Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 135 deg Point, M2 HSS, Black/Gold

MFR: LH Dottie

MFR #: HS32C

UPC: 781002821526

Item #: 48313

LH DOTTIE

Variable Pitch Hole Saw, 3 in. hole diameter, 3 x 1-3/8 in. cutting size, Carbon Steel material, Bi-Metal construction, Powder Coated finish, M3 Steel cutting material

VP48 Variable Pitch Hole Saw, 3 in Dia, 1-3/8 in D Cutting, Steel Cutting Edge

MFR: LH Dottie

MFR #: VP48

UPC: 781002284482

Item #: 66965

LH DOTTIE

Arbor, 1/4 in. arbor size, 3/8 in. drive size, Hex drive type, 5/8-18 in. thread size, Hex shank type, VPD4S drill number, 1-1/4 to 6 in. chuck size

V35P Arbor With VPD4S Pilot Drill, 1/4 in Arbor, 3/8 in Hex Shank, 3/8 in Pilot Drill

MFR: LH Dottie

MFR #: V35P

UPC: 781002285106

Item #: 71500

LH DOTTIE

Underground Tape, Non-Adhesive, Orange, 1000 ft. length, Non-Adhesive Polyethylene material, "Caution Buried Fiber Optic Line Below" legend, 4 mil. thickness, 3 in. width

UT44D Non-Adhesive Underground Tape, Orange, 1000 ft L x 3 in W x 4 mil THK

MFR: LH Dottie

MFR #: UT44D

UPC: 781002167440

Item #: 33009

LH DOTTIE

Tip Bit, 6 drill stages, 5/32 in. minimum drill diameter, 1/2 in. maximum drill diameter, M2 High Speed Steel material, Cobalt Titanium Coated finish, 1/4 in. Size, 1/4 in. shank diameter, Hex shank type

RTTP6000 Replaceable Tip Step Drill Kit, 1/4 in Dia Min Hole, 1/2 in Dia Max Hole, 6 Steps, M2 HSS, 1/4 in Shank

MFR: LH Dottie

MFR #: RTTP6000

UPC: 781002812104

Item #: 129133

LH DOTTIE

Short Ship Anger Bit, 1-1/8 in. bit diameter, 7/16 in. shank diameter, Hex shank type

618 Short Ship Auger Bit, 1-1/8 in Dia, 7/16 in Shank

MFR: LH Dottie

MFR #: 618

UPC: 781002146186

Item #: 141283

LH DOTTIE

C Style Conduit Body with Cover and Gasket, 2 in. hub size, Wall mounting, Die Cast Copper Free Aluminum material, Threaded connection, Neoprene gasket

C200CG Type-C Conduit Body With Cover and Neoprene Gasket, 2 in Hub, Die Cast Copper Free Aluminum

MFR: LH Dottie

MFR #: C200CG

UPC: 781002107125

Item #: 14852

LH DOTTIE

Long Ship Anger Bit, 1-1/8 in. bit diameter, 7/16 in. shank diameter, Hex shank type

1818 Long Ship Auger Bit, 1-1/8 in Dia, 18 in OAL, 7/16 in Shank

MFR: LH Dottie

MFR #: 1818

UPC: 781002218180

Item #: 136683

LH DOTTIE

Tip Bit, 9 drill stages, 5/8 in. minimum drill diameter, 1-3/8 in. maximum drill diameter, M2 High Speed Steel material, Cobalt Titanium Coated finish, 1-3/8 in. Size, 1/4 in. shank diameter, Hex shank type

RTTP6030 Replaceable Tip Step Drill Kit, 1/4 in Dia Min Hole, 1-3/8 in Dia Max Hole, 9 Steps, M2 HSS, 1/4 in Shank

MFR: LH Dottie

MFR #: RTTP6030

UPC: 781002812135

Item #: 88093

LH DOTTIE

Hydraulic Punch Kit, 13 Piece Size, Aluminum material, 1/2 to 2-1/2 in. conduit size, includes (1) 1/2" Die Spacer Ultra Heavy Duty Carrying Case and (7) Die Sets: Sizes - 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2", 3" and (1) 12 Ton Hydraulic Punch with Fully Articulating Head and (2) Tip-Bits Steps Drills and (2) Draw Studs/Collar: Sizes - 3/8", 3/4"

HPTK1 13-Piece Hydraulic Punch Kit, 1/2 to 2-1/2 in Punch Capacity, Aluminum Housing

MFR: LH Dottie

MFR #: HPTK1

UPC: 781002820444

Item #: 59482

LH DOTTIE

Gear Punch Tool Kit (19pcs set, includes case and gear punch)

GPTK2 Punch Tool Kit, Replaceable 7/16 in Quick Change Hex Adapter, 19 Pieces, For Use With Hole-Making in Steel & Stainless Steel, S45C Steel & Aluminum Alloy, Green/Black, Metallic

MFR: LH Dottie

MFR #: GPTK2

UPC: 781002857655

Item #: 1286469

LH DOTTIE

High Speed Drill, M2 grade, Steel material, Black/Gold finish, Split Point Type, 135 DEG Split drill point, 1/8 in. fractional size, 2-3/4 in. overall length, 3/16 in. shank diameter, Carded 4 pieces

HS8C 4-Piece Heavy Duty Jobber Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 135 deg Point, M2 HSS, Black/Gold

MFR: LH Dottie

MFR #: HS8C

UPC: 781002821281

Item #: 41389

LH DOTTIE

Spade Drill Bit, 7/8 in. Size, Hex shank type, Cold Forged Steel material, 6 in. drilling depth

SPD78 Spade Bit, 7/8 in Dia, 6 in OAL

MFR: LH Dottie

MFR #: SPD78

UPC: 781002217206

Item #: 89135

LH DOTTIE

Rotary Hammer Drill Bit, 1/2 in. bit diameter, 10-1/4 in. overall length, Straight shank type, 3 flutes, Tip-Carbide material, 8 in. drilling depth

SDS121014 Rotary Hammer Drill Bit, 1/2 in Drill Bit, SDS-Plus Shank, 8 in D Cutting, 10-1/4 in OAL

MFR: LH Dottie

MFR #: SDS121014

UPC: 781002122210

Item #: 201084

LH DOTTIE

Duct Tape, Polyethylene material, Red, 60 yd. length, 2 in. width, 9 mil. thickness, +200 DEG F temperature range, Cloth backing material

DT260RED Duct Adhesive Tape, 60 yd L x 2 in W, 9 mil THK, Cloth Backing, Red

MFR: LH Dottie

MFR #: DT260RED

UPC: 781002810643

Item #: 136312

LH DOTTIE

T Style Conduit Body with Cover and Gasket, 1-1/4 in. hub size, Wall mounting, Die Cast Copper Free Aluminum material, Threaded connection, Neoprene gasket

T125CG Type T Conduit Body With Cover and Neoprene Gasket, 1-1/4 in Hub, Die Cast Copper Free Aluminum

MFR: LH Dottie

MFR #: T125CG

UPC: 781002107880

Item #: 160385

LH DOTTIE

Color Coding Tape, Polyvinyl Chloride material, Red, 60 ft. length, 3/4 in. width, 30 N/CM tensile strength, 7 mil. thickness, Steel-1.5, Backing-0.15 N/CM adhesion strength, 600 V voltage rating

360RED Color Coding Economy Industrial Electrical Tape, 60 ft L x 3/4 in W, 7 mil THK, PVC, Rubber Adhesive, Red

MFR: LH Dottie

MFR #: 360RED

UPC: 781002847601

Item #: 209902

LH DOTTIE

Color Coding Tape, Polyvinyl Chloride material, Green, 60 ft. length, 3/4 in. width, 30 N/CM tensile strength, 7 mil. thickness, Steel-1.5, Backing-0.15 N/CM adhesion strength, 600 V voltage rating

360GRN Color Coding Economy Industrial Electrical Tape, 60 ft L x 3/4 in W, 7 mil THK, PVC, Rubber Adhesive, Green

MFR: LH Dottie

MFR #: 360GRN

UPC: 781002847571

Item #: 209632